Best oil 5W50. Automal and all you need to know about motor oils

As the engine is working, oxidation products, NAGA, as well as harmful deposits accumulate. It's unavoidable. All these sediments in the motor enhance friction, and this naturally leads to a deterioration in the engine. As a result, he begins to work under large loads, which leads to fast wear details. Therefore, for engines with large mileage recommended special oilswho are aimed at protecting the motor from wear and cleaning from Nagara. The company "Mobile" provides drivers a fairly large selection. The assortment also has lubricants for power plants with big mileage. Most effective is

Description

This product is fully made on a synthetic basis with the addition of special cleaning additives, which is necessary for old engines. Like any other synthetic base, this is also aimed at clearing the motor from a car, sludge and soot. The advantage of synthetics is support and stable work Even at lower temperatures compared to mineral oils.

Note that earlier this product was wearing two names: Mobil 1 Rally Formula 5W50 and Mobil 1 Peak Life 5W50. Now it is a slightly different lubricant with an improved formula. Oil saved all the advantages previous version And gained new positive qualities. Now lubrication meets modern world quality standards.

Special properties

In addition to the cleansing and dispersing properties, oil reduces the harmful effect when using unstable and poor-quality fuels, prevents the wear of the motor, due to which its service life increases.

Also, the product during the entire service life remains viscosity, and from replacement to replace it remains stable. True, this is true only in cases where the engine is working. When mixing the oil with antifreeze, for example (it happens), its viscosity and lubricating properties change, but there are no fault of the product itself. Also, this lubricant is slightly evaporated, therefore it is consumed fairly economical and even contributes to saving fuel. Also, the product is resistant to temperature changes and overloads of the car, it can work successfully even in extreme conditions.

Application area

5W50 is designed for engines of passenger cars, however, it is recommended to fill it into those engines that exceed 100,000 km. It is ideal for cars of European brands and major Porsche type concerns.

Characteristics Mobil 5W50

SAMI main characteristic This oil is its viscosity indicated in the title (5W50). What does this marking mean? First, the number 50 in the title says that the product is summer and works well when high temperatures. Secondly, the value of 5W indicates its winter destination. This makes it clear that the oil works well in the cold and has a normal viscosity at negative temperature values. This means that 5W50 is all-season, and it does not need to be changed every time on the occurrence of cold or warmth.

Temperature range of work

And now in more detail. The figure 5 shows the name, with as far as low temperatures, the oil can work normally. The lower the number, the lower is the temperature limit. Index 5 is not the lowest, but it makes it clear that the oil does not lose its viscosity and ensure the normal start of the motor at a temperature not lower than -32 degrees.

Digit 50 in the title shows, at what maximum air temperature ambient Oil will work stably. In this case, the upper limit is 50 degrees. That is, the Mobil 5W50 product operates in the temperature range from -32 to +50 degrees. There are not so many oils that are capable of working in such a wide temperature range.

Such Mobil 5W50 allows you to use it in all weather conditions and in almost all regions of Russia. Even in those where the temperature drops to -30 degrees. Of course, in very scary frosts, which are observed in the north, oil is not able to provide normal lubrication of friction pairs. But the lubricant itself is resistant not only to ambient temperatures, but also to overheating of the motor.

Technical characteristics of Mobil 5W50 are ideal for cars. russian production. In the cars of the VAZ brand, the efficiency of oil is quite high, and even quite old engines well and smoothly work in it. Of course, when using this lubricant, you must be careful, pouring it into strongly dirty engines. Intensive cleaning contributes to the fact that the filters and valves can be clogged by nagar particles.

Pros and cons

Mobil 5W50 is an excellent synthetic temperature resistant to temperatures, and it effectively cleans the motor from contaminants. It has certain advantages compared to semi-synthetic and mineral lubricants.

Advantages:

1. Beautiful lubricating qualities. All running pairs of motor are effectively lubricated, the oil forms the necessary thickness of the oil film and during the entire service life retains the required viscosity. Temperature oscillations and even dispersed particles do not particularly affect the viscosity of the lubricant.
2. Cleaning properties. Due to the content of special additives in the composition, the oil clears all parts of the engine from soot, sludge and nagar, prevents the formation of new particles. All this reduces the engine wear and significantly extends its service life.
3. Efficiency. In contrast to many other oils, it practically does not go to the avgar, and the replacement before replacing its level does not change. But this is true only for those engines that themselves do not "eat" oil. If there is a problem with the engine, then it will "eat" even the most high-quality lubricant. Mobil 5W50 also contributes to fuel economy due to reduced parts friction.
4. High resistance to temperature fluctuations. Universal oil, and that says it all. It retains its viscosity indicators at negative temperatures and with a strong heat, therefore will provide engine launch in any weather conditions.

Does this oil have minuses? They cannot be wrong. Modern engines have long ceased to be simple mechanisms. They are more like biological human organisms, so it is impossible to say for sure whether this lubricant is suitable for your car. However, Mobil 5W50 is actively used both the owners of old foreign cars and owners of the Russian car industry. It is also pouring in the 2005-2010 cars.

Mobil 5W50 fakes

Some buyers of this product remain unhappy with his quality. But often this is due to the fact that buyers are used in unsuitable conditions or acquire a fake. In the first case, the owner itself is guilty, in the second - fraudsters. If we speak frankly and honestly, then fraudsters deserve respect. Even their non-original oil, which is sold in 90% of stores, works very effectively and is often no different from the original. Therefore, sometimes you should not bother about it at all.

You can distinguish the fake only by packing, label, lid:

1. Cracks, chips on the package - the first sign of the fake. Plastic may have a wave-like structure, must be smooth.
2. The second sign of the fake is a poor-quality label. It can be poorly printed on it, and the remnants of glue can be seen around the label.
3. Cap. In original packages, it opens according to a special scheme, and when opening it appears. In fakes, all this may not be.

The original silver oil canister with a blue tint has a darker blue lid. The rear label has 2 layers. It is also worth noting that mobil oils 5W50 are produced in Europe. In Russia, there may be products produced in Sweden, Russia, Finland. In Russia, there are no factories where this oil is being done.

Few people know how to choose a 5W50 engine oil. In addition to lubricating parts of the motor, it displays the Sport from the engine, the nagar and soot, which allows all parts to work properly. In addition, the dust and dirt falling into the engine when driving the car also do not contribute to his smooth operation. Oil helps all these harmful substances wash off and remove from the engine.

The 5W50 engine oil brings from the engine South, Nagar and Soot.

At the time of movement, regardless of the temperature on the street, the engine is strongly heated, as a result of which all its systems wear out. Each manufacturer of the car gives its recommendations, which products can be used in this vehicle. Car owner need only to follow these recommendations and choose necessary oil For the engine of its vehicle.

Characteristics and types of oils

Modern manufacturers produce many product instances, while they all differ from each other with a composition and, accordingly, the price. The basis of engine oil can be both substances obtained in the extraction and processing of oil products and the chemical mixtures created in the laboratories. Something strangely created by a person artificial synthetic products are much more efficient than natural, or mineral, as they are also called, since their composition is ideally selected in laboratory conditions.

During operation, the car may be in different conditionsAnd he moves along the roads in different weather and at different speeds. All this has an impact on the operation of the engine, and the mineral natural oil, filled into it, is not always adequately adjusted for these conditions. But the synthetic can change its characteristics under different operating conditions. For the maximum effect and comfort mode, mixtures of synthetic and mineral oils are also created, which are called semi-synthetic. Their characteristics are optimal for most such products used in modern cars.

If the instructions for the machine indicate that it is recommended to be applied mineral oil For the engine, then in such a motor should not fill a synthetic or semi-synthetic substance, since the viscosity (the main characteristic) is different.

As a result, the artificial product can flow from the engine through its rubber parts. For each car, an oil with a certain viscosity is recommended. But the car enthusiast must take into account under what conditions it will exploit its vehicle. After all, the thickness of the oil depends on the temperature - if it is hot on the street, the oil becomes liquid, and vice versa, if the temperature is minus, then it freezes and becomes thick.

The oil is greater viscosity than necessary, may not cope with its functions and insufficiently liqueurs the engine parts, and this in turn will cause their excessive friction. And too liquid will not be able to prevent the wear of the details, as it will just flush with them. Therefore, the incorrectly selected product can lead to premature engine wear. Not only for each car recommended its oil, but also for each weather season it is better to select your desired product.

When filling the winter oil, the car is provided with a reliable start and engine plant even in the lowest temperatures.

These products have a small dense, so that the Carter can start the engine. If in winter to pour a product intended for the summer exploitation, then its viscosity will be very large, and the engine will not be able to start at low temperatures. And vice versa, if in the summer foul winter oil, then wear the car will be colossal.

It is necessary to pay attention to this fact, especially since the oil change is required every 5-10 thousand kilometers traveled.

If the operation of the car does not imply a large number of meters traveled, and such a distance machine will not pass in one season, that is, it makes sense to fill the so-called all-season synthetic products that have characteristics of both summer and winter oils.

Back to the category

Motor oil 5 W-50

Exxon Mobil Corporation is one of the flagship manufacturers of engine oils in the world. Their collection has a ruler with different characteristics and composition. Products under the Mobil1 brand today are the best synthetic products that ensure the excellent and long-term operation of the car. Features of this oil:

Menuing the engine in the engine is necessary every six months or every 10,000 km of mileage.

1. Car manufacturers recommend 5W 50 not only for new cars from the conveyor, but also for long-term cars.
2. Operational qualities are at the peak of all others; It has excellent characteristics, both for the summer and for the winter season, that is, is all-season.
3. Prevents the process of engine wear and its component parts, protects the motor from corrosion and wear. Unique patented additives included in the oil is the development of scientists of only this company. They provide minimal cluster in it harmful substances, as well as soot and soot. Due to this substance, it is capable of maintaining its excellent performance significantly longer periods than other similar.
4. The composition includes antioxidant substances that can restore its properties during operation.
5. According to the research results, the engine oil 5 W-50 retains its initial performance features On average, 30% more than others, as a result, even with a replacement time, it will be much better than everyone else.

Thus, this product has a wide range of use. For example, it will work equally well in passenger cars, and B. cargo vehicles. The operating conditions of the machines can be different. So, when driving around the city or moving along mountain roads, in the conditions of the Far North or Roast South, the engine oil 5 W-50 equally will perfectly perform its functions. Technical characteristics of the substance are usually indicated on the canister in which it is located.

Few is known how to correctly choose engine oils 5W 50. In addition to the lubrication of the engine parts, they ensure the excretion of various deposits. This makes it possible to function all the elements uninterrupted. Foreign particles found in the force unit can lead to its breakdown. The car promotes their washes and removal from the motor.

When driving, regardless of the street temperature, the power unit is heated, due to this, its details are subjected to wear. Any auto maker recommends that engine oils better pour into his car.

Properties and types of lubricants

Today's manufacturers produce many different engine oils. They all differ in origin and cost. The main lubricant fluid can be both elements that are obtained in the extraction and processing of petroleum products and chemicals made in laboratory conditions. Surprisingly, the laboratory-produced synthetic cars are much better than natural, which are also called mineral water. It is due to the fact that the synthetics passes many tests.

When using the car may remain in different conditions (temperature, speed). This affects the operation of the motor. The mineral water, which was flooded in the OI, is often not able to adapt to changing conditions. Synthetics can change its own parameters. To ensure a good effect, tested lubricants, combining synthetics and mineral water (semi-synthetic), which can be used in various cars due to their own characteristics.

Timely oil replacement will increase engine life

If the operational manual says that the mineral water is better in the motor, you do not need to use synthetic / semi-synthetic, because the viscosity of the oil is different. Because of this, the petroleum product can flow from the motor through its elements from rubber. For each machine, it is recommended a specific viscosity of the oil, installed by tests. The driver must be taken into account under what conditions he intends to ride a car. The lubricant characteristics depend on temperature. The car will be a liquid summer and viscous winter.

Too thick lubricant will not be able to perform your own task, poorly smearing the parts of the motor. This will lead to high friction. Overweight liquid petroleum products will not be able to prevent the wear of the engine parts, because it will be simply to proceed.

Winter lubricants are quite liquid. It is necessary that the Carter can start the motor. If you use a car in frost, which is intended for use in summer, it will be too viscous, the motor simply does not start. And on the contrary, if in the heat pour the winter lubricant, then the wear of the parts will increase greatly. Fast wear of the power unit can bring to sufficiently serious faults.

Usually seasonal oils It is necessary to change every five to ten thousand kilometers. If the car is rarely used, it is desirable to pour universal cars that combine the properties of summer and winter lubricants.

Pros 5W-50

The company "Mobile" is considered one of the best manufacturers of lubricants. Its assortment has oils with different indicators and composition. The Mobile Automasla is currently considered high-quality synthetics, which provides a comfortable and long-term use of the machine. Advantages of 5W-50:

1. Machine manufacturers recommend 5W-50 for both new cars and for vehicle With mileage.
2. Tests confirmed that operating performance is very high. Lubrication is suitable for any season.
3. 5W-50 protects the motor from wear and corrosion. Unique additives that are included in the lubricant, we developed Mobil specialists, conducted many tests. Additives do not allow to accumulate in petroleum products to harmful elements, do not give to the ride. Thanks to them, the lubricant does not change their own excellent exponentials of exploitation for quite a long time.
4. The composition includes antioxidants that restore operational characteristics.
5. Tests have shown that lubricants such as 5W 40 5W-50 retain their own indicators for thirty percent longer than others. In view of this, they do not need to be replaced frequently.

According to SAE, the decoding of this all-season oil is as follows:

• 5 - the minimum temperature limit is minus thirty degrees;
• 50 - the maximum temperature limit is forty-five degrees.

5W50 has a wide range of applications. For example, it is perfectly suitable for both cars and trucks. Operational conditions may be different. When moving around the city or in the mountains, in a heat and cold, this lubricant protects the engine well. Technical indicators Automobiles are usually written on its tank.

Comparison with Other Oils

10W60.

Not everyone knows what the oil is 5W 50, for example, from 10W 60. To respond to this question, you need to decipher the SAE 10W60 marking. "10" means that the freezing temperature is minus twenty-five degrees. "60" means that the maximum temperature limit value is plus fifty-five degrees. Obviously, 10w60 is perfect racing carswhere the engine is strongly heated. If compared with 5w 50, then 10W60 is worse for winter conditions. In the summer there is no special difference that pouring, if you, of course, are not a racer.

5W40.

5w40 from 5W50 is characterized in that it is worse for use in particularly angry conditions, for example, in the south. The difference is that "Socipte" is recommended to pour if the street is not hotter plus thirty-five degrees.

0W40

If you compare 0W40 from 5W 50 and execute decipher SAE Markings, the following difference becomes visible: The temperature of the frozen temperature for the first oil is minus thirty-five degrees. This means that it is ideal for regions with a very cold winter, for example, the Far North.

5W30

Oil 5W30 is considered one of the most common lubricants used in Russian regions with moderate climatic conditions. However, if you live there, where the temperature is far from normal, better Leite in motor 5W50.

Many are also interested, whether it is possible to mix different lubricants. It is not recommended to do this if the other is not spelled out in the operational manual. If mixing the car with completely different composition and characteristics, it can lead to a rapid engine wear. Therefore, it is better not to risk and use some one oil.

Conclusion

The proper functioning of the car depends on the actions of the host. If the motor is pouring high-quality petroleum products, you can not doubt his smooth work. You do not need to try to save on this consumility like an oil, because it should be changed too often. Repair of parts of the power unit and their replacement will be subsequently much more expensive than buying high-quality oil fluid.

Automobile 5W50 will protect for a long time car Engine. Sadly, it often happens that the purchased petroleum product turns out to be a fake, which is not capable of smearing all the parts of the motor. So that this does not happen, you need to buy oil only from reliable vendors.

In this article, we will look at the engine oil for low temperatures 5W50, we'll figure it out in its technical characteristics, operating conditions, tell about its advantages and disadvantages, to which cars are suitable, as well as about the composition of the lubricating fluid and user opinions.

Specifications 5W50

Consider specifications Motor oil 5W50. The main indicator is viscosity, at low and high temperatures, it remains unchanged. Decoding, these numbers and letters in the name of oil and which properties have an oil product:

• 5w- oil is suitable at temperatures -30-25 ° C
• -50 The oil is suitable for use with heat to + 45-50 ° C.

IMPORTANT! The smaller the figure is less than the viscosity of the oil, the digit is more - the amount of thick. It follows the conclusion that the oil 5W50 can be used in the temperature range from -30 to +50 ° C.

Temperature range 5W-50

Lubricating fluids are used at low temperatures up to -35 ° C. And heating up to +100 ° C. Transferring such drops oil fluid Must keep its viscosity without losing its qualities. Thus, the viscosity class is determined: low-temperature (winter) and high temperature (summer). The viscosity of the oil directly depends on the temperature of ° C

Benefits

5W50 lubricating liquid consists of basic oilsIn combination with a package of balanced additives and thereby guarantees best quality When operating, with any temperature regimes and various modes of engine operation, without losing protective properties:

• guarantees long engine operation, prevents deposits;
  Additives prolong the life of the oil;
• mixing of excellent base oils with a package of additives provide excellent wear protection;
• a large temperature range of viscosity provides protection for both high and low temperatures;
• competitive and efficient, providing protection in any working conditions.

What motors fit?

Due to the unique composition, the 5W50 oil is suitable for many car motors, in various fields of operation for both ordinary travel around the city and for limit loads on auto racing.

• in many diesel (without diesel filters) and gasoline engines;
• engines with turbo supercharger;
• all possible levels of operation.

Remember! Always pay attention to the tolerances, in the car manual, when choosing an oil.

The manufacturer recommends applying this product for those motors that work on limit revolutions and loads. We are talking about cars whose gearbox allows you to go to sports regime. This oil is recommended to use such companies:

• Audi
• Mercedes-Benz.
• Porsche.
• Skoda.
• Volkswagen.

It is also advisable to use high viscosity oils in cars that have passed more than 150 thousand kilometers, since there is a stable protective film with such viscosity. New cars with mileage up to 100 thousand Kilometers use less viscous mixtures, such as 5W30, the passage of the turn of 100 thousand is worth moving by 5W40., After 150 thousand on 5W50.

In the process of engine wear, the gaps between movable parts increase constantly. As the car is exploited, the low-viscous mixture does not cope with the task - to form a durable protective film without breaks. In addition, gaps between piston rings And the cylinders also increase and do not provide the desired compression. Because of lubricant penetrates the combustion chamber and burns out there with fuel mixture. What entails loss of oil in the engine. More thick liquids Let minimize these losses or eliminate at all.

Synthetic or semi-synthetic?

With permanent operation, the car transfers all sorts of loads, various temperature conditions and modes of operation, at different speed and engine speed. It greatly affects the operation of the motor and not always a semi-synthetic oil, filled into the engine, copes with its functions by 100% and complies with the conditions and factors. Synthetic, in turn, can change its properties and adjust to certain conditions. To work correctly, mixtures of natural and synthetic oils, called semi-synthetic. The characteristics of these mixtures are optimal in most products. If the Auto Operating Recommendations indicate which type of oil is allowed, it is not necessary to retreat from this and carry out experiments, because the main characteristic (oil viscosity) will be different.

Synthetic oil is almost invulnerable to temperatures and does not lose its characteristics. The temperature does not affect the viscosity of synthetics and thanks to this, the start of the engine is made easily under all weather conditions. The only drawback is the cost of the product! Accordingly, the choice depends on your material opportunities.

Important! It is forbidden to mix mineral, semi-synthetic and synthetic oil - such a mixture can cause significant damage to the engine.

What can I mix 5W50

Mixing oil is permissible only in emergency case. If there is no other exit, then use fluids released at the same factory, from the same manufacturer so that the base is the same. Maximum run on such a mixture no more 2 thousand km. After it is worth making the engine washing and replace the oil completely.

IMPORTANT! Do not wash the use of prevention, except when proceeding with semi-synthetic oil on synthetic or mineral.

User reviews

Sergey from Dnepropetrovsk argues that the use of 10W30 oil is optimal if you require all the well-known instructions. Its price fully corresponds to the quality of the product.

Dmitry, Donetsk. I have been using this brand for almost 5 years, it suits me, the car works fine, there are no problems.

Alexander from Rostov-on-Don suggests that this oil has no special advantages, but its price is also not high. This allows you to use in your car.

One of the residents of Samara, who preferred to remain incognito, talks about significant disadvantages of oil. It burns and highlights an unpleasant smell, I do not recommend.

Konstantin from Moscow for 15 years uses this type of oil. No complaints this type Oil is not.

The modern market is replete with a multitude of motor lubricants. One of their main indicators is low-temperature and high-temperature viscosity. Among the proposed products there are fluids that are indicated according to the SAE classifier as "oil 5W50". What do these numbers mean and what properties they do the oil mixture.

How do motor oils produce

Any engine oil consists of two main components - the basic composition and a whole set of additives designed to improve its characteristics. The main qualities of one or another lubricant material depend on its base base. Modern production technologies allow you to get 4 varieties of basic oils:

• mineral;
• semi-synthetic;
• 100% synthetic;
• NS synthetics, or hydrocracking.

Mineral oil (Lubricant) is obtained from crude oil. In this case, the mineral liquid itself is raw material for the production of NS synthetics. The present synthetic base lubrication (Full Synthetic) is obtained by the synthesis of polyalphaolefins (PJSC) contained in the concomitant oils of gases - such as ethylene and butylene.

All this work is made on refineries (refineries). The semi-synthetic engine oil (SEMI Synthetic) has a basis for 60-80% consisting of a mineral substance. The remaining 20-40% is discharged under the synthetic basic lubricant. PJSC synthetics is perfectly mixed with mineral liquid, giving the final product. good characteristics at a low price.

NS-synthetics gradually decides leading positions in real synthetic oils. The level of purification from paraffins, sulfur, nitrogen, polycyclic and other harmful compounds, it is so high that oil is obtained at the outlet, almost not inferior to 100% synthetics. True, thermal oxidative stability is worse. Such lubrication will have to change more often. All this pays off lower costs (by 30-40% cheaper).

This synthetics is synthesized from lung hydrocarbons that are part of gases (oil from PJSC). An even better basic composition is made from the estrices that have natural origins. To do this, use rapeseed, coconut or any other vegetable oil. Such a production technology is very expensive. Therefore, estrices only add to PJSC synthetics in the amount of 4-5%, while getting quite high-quality products.

The viscosity characteristics of oil mixtures

The viscosity level of each lubricant It is established according to the SAE classifier created by the US auto industry engineers. It is determined by the fluid resistance to its free leakage - that is, the ability of various layers of oil to move relative to each other with certain internal friction. The greater the level of this friction, the more viscous is the liquid. This indicator is directly dependent on temperature.

Motor oil works in heavy temperature conditions, coolant to low negative temperatures, up to -35 ° C, and distinguished inside the motor up to + 100 ° C and higher. Testing such temperature fluctuations, the lubricant must maintain a constant level of viscosity, otherwise it will lose all of its quality, so required engine. That is why, according to the SAE method, two viscosity components are determined - low-temperature (winter), as well as high temperature (summer). In severe frosts, winter viscosity should ensure good engine turning, otherwise it will simply not start. In addition, without having good fluidity, the lubricant will not be able to pump through the narrow channels to the parts of the motor. As a result, he will work dry, which can lead to encoffin and subsequent overhaul.

Having a winter fluidity 5, the oil composition 5W-50 will help to easily start the engine at -30 °. Total levels are six: 0W, 5W, 10W, 15W, 20W, 25W. The greater the number, the worse the indicator. For example, 25W can only be used to a temperature of -10 ° C, in colder weather it thickens and no longer works.

"Summer" indicators are only five: 20, 30, 40, 50, 60. The higher the indicator, the more viscous there will be a lubricating fluid at high temperatures, inside the working motor. Oils with "summer" fluidity 20, 30, 40 when heated to 110-115 ° C is diluted to such a state, which cannot form a protective oil film. And the All-season lubricant 5W50 does not lose its working qualities up to + 150 ° C.

Where applies oil composition 5W50

Such engine oil is used for power units operating in difficult conditions, for example, when driving a sports style.

On the motor racing, the motors work on limit revs, highlighting a huge amount of heat. Such modes can only withstand the lubricant mixtures having a "summer" viscosity at levels of 50 and 60. Then you can not worry about how much the engine will serve - the main thing to get to the finishment first.

Since the oil composition with such a viscous characteristic creates a solid and dense protective film, it is advisable to apply it in worn engines, which have already passed 150 thousand kilometers and more. If for new engines traveling less than 100 thousand, low-viscosity lubricants are used, such as 5W30, then after a 100,000th turn it is worth moving to 5W40, and after 150 thousand - by 5W50.

This is due to the fact that the gaps between the details in the wear process are increasing all the time. A small grease can no longer form a solid film without breaks. In addition, the seal between rings of pistons and cylinders walls is not created. The engine is stronger than the compression in the cylindropore group drops, the oil fluid begins to penetrate the inside of the combustion chambers and reflect there with the fuel mixture. If applied lubricant composition With a higher viscosity, these phenomena will decrease or disappear at all.

Mobil 1 PEAK LIFE 5W-50

Fully synthetic lubrication, designed specifically for use in worn engines, is made using SUPERSYN's own technology. Recommended for motors running over hundreds of thousands of kilometers. The main emphasis is made on the slowdown in the process of formation of slags, sludge and high-temperature varnish sediments, as well as maximum cleaning from these harmful components.

Motor oil contains powerful anti-wear additives, slowing the aging of the motor, almost does not care. Antioxidant additives allow you to exploit lubricant with extended intervals between replacements. In addition, the use of the product in force aggregatesexperiencing strong loads. The American standard API has defined its classes like SJ / SL / SM / CF. European ASEA Classified as A3 / B3, A3 / B4. Has tolerances OT Mercedes Benz., Porsche, Volkswagen.

Motul Sport 5W50

The basis of this engine oil is based on the formula based on Estera (esters). Such a solution allows the protective film to maintain its stability at the highest temperature loads. Lubrication retains the claimed flow rate under any operating conditions. It has good protection against oxidation, which is provided by effective additives. Viscosity index achieving high level (186), allows you to maintain stable viscosity indicators in the widest temperature range. Can be used in diesel and petrol engines, including injection, turbocharged, as well as multiclapped. According to the API, the lubricant is assigned a category SM / CF.

Conclusion

We led only 2 examples of motor oils with a viscosity of 5W50. In fact, they exist much more. So, Exxon Mobil Corporation releases another variety - Mobil 1 Rally Formula 5W50 for sports driving. Similar products can be found in such well-known manufacturers like ARAL (Megatronic 5W50), ELF (Excellum 5W50), Addinol (Super Visco MV0556 5W50), as well as many others. Before using these products, you should find out whether the use of oils with such characteristics for your car is allowed. The necessary information Located in the service books attached to each car.