What oil should be poured in Hyundai accent. How to swap oil in the engine Hyundai Accent

In order to replace the lubricant in its car, it will be enough for a service station for help or this procedure can be made independently. If the driver still decides to use the service of a hundred specialist, this choice will be the most optimal because the master has an excellent approach to any car. But one day the need for self-replacement Oils, so it is necessary to consider how it is correct, what and how much oil must be poured into the engine Tagaz engine Hyundai Accent.

All products of this category have a special encoding that corresponds to the parameters of the car use. The encoding has a mask, for example 5W-20. To choose the right oil for Hyundai accent, you need to completely understand this encoding.

The first digit in this meaning is an indicator of rotation and pumping when using the car at the lowest temperature. This value fully characterizes the point of the engine start temperature. If the indicator is listed even lower, then the starting temperature of the motor will be even lower.

The second digit after the letter is an indicator of the maximum viscosity of the fluid at a conventional temperature of the engine operation of 100 degrees and minimal viscosity at 150 degrees. These temperature indicators are considered to be maximum for the operation of the motor. If it works at the maximum available temperature of 100 degrees, while viscosity car Oil Sleeping to the itself low levelThe greatest savings of fuel in the car are achieved, the power of the motor operation increases.

It is important to remember that the low viscosity of the lubricant can lead to destruction or even easy engine damage, since the surface covers the surface with a small thin layer.

Manufacturers always indicate which lubricant should be poured into a motor of a particular machine. But these recommendations can be adjusted for yourself, since they are recommended, but not binding. Adjustment occurs at the level of viscosity calculation at the lowest air temperature. If you take into account changing weather and the climate of the country's territory, usually the values \u200b\u200bof 0W, 5W, 10W are determined for the brand of such a machine. The Hyundai Accent engine is designed to use the most viscous oils, so 5W-40 is considered the optimal encoding for such an engine.

Still, what oil to fill? The manufacturer has determined three stamps:

• LIQUI MOLY;
• ARAL;
• Mannol.

Oil for Hyundai Accent Before the usual stage of operation of the car should be used at the initial stage of its running. Actually, the engine itself runs through and at this moment you need to adhere to all recommendations from the manufacturer.

It is necessary to take a special responsibility to the runframe, because the result of this process determines the further fate and operational characteristics of the engine. This process is an average of 6000 km. During the period of the first 6000 km, the owner of the car should not exceed the speed and allow motor overheating.

It is possible to pour into the engine only the oil that was used when running. If the oil is changed to another, it can lead the car to its inadequate repair. Which oil pouring must be determined at the purchase stage. When driving, it is worth paying attention to oil consumption. Noise can be heard in the focus with mileage, it means that its consumption has increased.

It is important to remember that excess oil needs to merge and not fill the engine. If the motor works smoothly, does not disabre any noise, and the machine itself moves smoothly, then you need to stick to this oil level.

Hündai engine requires a change of its liquid in Russia both in winter and in summer. In a warm climate, this necessity partially disappears, but on the territory of Russia is required to replace twice a year. It is also important to pay special attention to quality, it is not necessary to save on this, since further repairs will cost several times more.

How to replace oil in such a car?

Hyundai Accent, as previously mentioned, requires replacement of oil once every half a year, depending on the season. But it is worth considering that the replacement must be performed for every 10 or 15 thousand mileage. Residents of a major city need to do every 8 or 10 thousand runs.

In order to replace the oil, the following tools will be needed:

• actually itself oil, 4 liters;
• oil filter;
• plum plug;
• keys for promotion - at 17 and 19;
• separate key for spinning oil filter;
• set of torks.

How to drain and bay oil?

Drain is produced in stages, namely:

1. Before the replacement itself, you need to ride a bit by car to warm up the motor;
2. The car travels and is installed on the lifting, ignition is jammed;
3. The cork of the neck is removed, where the filler lubricant is installed;
4. It will take a container for further drain, it must be put nearby;
5. The plug plug is unscrewed, the protection in presence is removed;
6. Merging the old oil needs to pay attention to that if there is nothing superfluous in it;
7. Merging all eudos from the reservoir, you need to spin a new plug plug;
8. Replace the oil filter.

I need to pour oil carefully so that nothing sheds out the neck. In order for anything bad that it happened, we use a watering can. If you do not have any leaks, car enthusiasts are used to substitute the neck of the plastic bottle as an alternative.

After the oil is flooded, you need to start the car for a few minutes. If the oil remains at the same level, it means its volume to the engine will be quite enough, and if it has been noticed that oil after such a procedure has become less, adding the required amount.

At the end, you can make an emphasis on the importance of the timely replacement of the liquid. It is also worth remembering that it immediately does not change after running, and the runoff itself should also be performed in full so that it is not spent on expensive repairs. It is necessary to change it twice a year and follow the noises of the motor immediately after it is replaced to determine the fluid that is suitable for it and prevent both overflow and is not allowed.

Video: Replacing the oil in the engine Hyundai Accent do it yourself

To prevent wear and providing normal operation car Engine Operating oil should be used in the motor. If the consuming material loses its properties, it will not be able to lubricate the fuel parts and the nodes of the power unit. In this article we will tell about which oil pour into accent and what is the process of replacing fluid with their own hands.

[Hide]

How often does the replacement required?

In Hyundai, the focus Tagaz 2004, 2006, 2007, 2008, 2013 and the other year of release on the recommendations of the manufacturer should be changed with lubricants when running 12-15 thousand kilometers. In fact, domestic specialists recommend replacing the liquid in the car's motor at least than every 6-10 thousand km.

There are a number of factors, as a result of which the liquid loses its performance:

• seasonality of using the machine taking into account temperature differences in different time of the year;
• ride style - aggressive or gentle;
• the volume of loads that are imposed on the engine;
• the duration of operation of the power unit under traffic conditions;
• road surface quality;
• volume of the power unit;
• engine number, as well as its year of production.

These factors can reduce the operation motor fluid, regardless of the mileage of the car. If a force aggregate Works in intensive conditions, then experts advise changing the oil every six months.

Which oil is better to pour?

If you do not know what motor oil Pour into the engine car Hyundai. Accent with mileage, you need to figure out the product recommended by the manufacturer. For operation, any oil is suitable for the viscosity characteristics of 5W20, 5W30, 5W40. The vehicle manufacturer recommended that such a sequence of searching for lubricants. If you find a product with a class of viscosity 5W20 is not possible, you can use the 5W30 liquid.

An important factor in the selection of the product is the style of movement. If you prefer a calmer ride style, experts recommend pouring into focus 8 or 16 valves Leichtauf Special LL SAE 5W-30 lubricant. This oil has high antifriction characteristics. In harsh operating conditions, lubricant prevents the formation of oxidation in the system and contributes to the economy of fuel. If you prefer a more aggressive movement style, then Ceratec additives can be added to the power unit. They are manufactured in accordance with molybdenum-based technologies using ceramic components. Motor provides reliable protection when working in aggressive conditions.

The automotive manufacturer advises consumers to use the oils of Aral, Mannal and Level Moth. These products are optimally suitable for use in modern engines. Lubricants enhance the resistance to the oxidation of basic products and are characterized by an increased service life. With the proper operation of the engine, you can achieve fuel economy. No matter, synthetic is used or semi-synthetic.

The Hyundai manufacturer allows the use of liquids in motors corresponding to the class of viscosity ASEA C3:

• Shell Helix ultra;
• Aral SuperTronic Longelf 3;
• Elf Solaris;
• Longtime Hai Tech;
• Middlend Crypto.

Evgeniy Sagaydak user in his roller spoke about the choice of motor fluid for the engine of accent.

Selecting a filter element

To category supplies Oil filter belongs, it should also be changed. On the recommendations of the manufacturer's plant, it is best to use original filtering devices. They allow you to effectively clean the consumables from impurities and contamination, as well as the wear products of the power unit. In the absence of original filters, it is allowed to install analogs.

We are talking about brand devices:

• Alco Filter;
• AMC Filter;
• Bosch;
• Ashika;
• Blue Print;
• Champion;
• Fiaam;
• FRAM;
• Filtron.

Level control and required volume

It is important to know exactly how many liters need to pour into a power unit. If the amount of lubrication is insufficient, it will lead to malfunctions in the motor's motor operation. And the excess volume of fluid will cause the extrusion of sealing elements and seals. In addition, the level of combustion of additives and lubricant additives in the CBOs cylinders will increase when re-manufacture. All unburned elements will eventually reduce the effectiveness of the functioning of the catalyst, settling on its internal surfaces. The accurate volume filled into the engine is indicated in technical manual To the car. How many car owners are poured into DVS depends on the year of release, as well as modifications of the vehicle. On average, 4.3 liters are enough for the bay in the engine.

Level control is performed on a cold engine. Open the hood of the machine and find the dipstick for diagnostics, it is installed in a special hole on the cylinder block. Remove it and wipe with a rag, then set it out again and pull out again. Ideally, the fluid level should be between the MIN and MAX marks.

Possible causes of oil consumption

What factors affect increased flow Motor fluid:

1. Overflow lubricant. This causes an increased fluid consumption. The ventilation system of the CARTER CARTER will begin to squeeze out of the power unit an extra volume.
2. Lubrication leakage of irregularities, as well as damaged corrosion.
3. Permanent operation of a car in high speeds, especially during running through the power unit.
4. Fluid mismatch in viscosity class. If this parameter is too high, the combustion of the lubricant will occur slower.
5. Accelerated wear of the components of the power unit. Outlooking the oil slimming caps, lumens may appear on the sleeve and rods of the valve. Wear piston rings, etc.

The main cause of rapid flow is usually in the fuel fusion. The more the number of pistons in the engine, the faster the unit will eat oil.

According to experts, one overheating of the machine motor can lead to the fact that the unit will begin to eat lubricant.

One of the most serious problems is leakage. The liquid can leave the lubrication system from under the valve cover, laying the head of the cylinder block, the filling neck seal, the drain hole. Often, the lubricant leaves from under the seals of the camshaft and crankshaft, the oil filter, or the crankcase pallet laying. The leaks can be determined by visual diagnostics. If you failed to identify the cause, most likely the engine eats lubrication as a result of wear piston rings or masonry Caps.

Replacing lubricant with your own hands

You can perform the replacement of the consumable material yourself without attracting specialists.

Tools and materials

What will be required to fulfill the task:

• fresh engine fluid;
• filtering device;
• cork for a drain hole with a sealing ring;
• spanners at 17 and 19;
• special tool for dismantling oil filter;
• set of sprocket keys.

You can learn more about replacing the consumable material and the filtering device from the roller shot by the user Andrei Florida.

Stages of work

Change working fluid In the power unit, Hyundai emphasis is performed as follows:

1. Warm engine machine. When the power unit reaches the operating temperature, the viscosity characteristics of lubrication decrease. The consumable material becomes more liquid, which allows you to drain it without any problems from the motor.
2. Congregate Hyundai focus to the garage with a pit or on the overpass. Stop the motor and give it about 15 minutes to cool.
3. Click under the bottom of the car and find a plug hole. From it will be a waste fluid. Submire the capacitance under the stopper in which the working will be merged. It can be an old bucket, a basin or a cropped bottle. If the car is equipped with a pallet protection, it must be dismantled, for this, unscrew all the bolts that fix it.
4. Unscrew drain plug And wait until the system has all the consumables.
5. Evaluate the condition of the fusion of the consumable fluid. If there are serious pollution and deposits, as well as wear products, the power unit is recommended to rinse. For cleaning, a special means will be required. Such an oil can be bought in any auto shop. Tighten the drain hole and fill the flushing tool through the filler neck, then start the engine and let it work. The time that the motor should work is indicated on oil etiquette. Drain the washing agent from the lubricant system after cleaning.
6. Install a new plug into a drain hole with a sealing rubber.
7. Before the bay of the new fluid into the lubricant system, you must change the filtering device. In Hyundai, the focus can be used two types of parts - replaceable and steel non-analysis. Replaceable filters are dismantled by unscrewing the screw located on the device housing. When removal, it is recommended to visually inspect the replaceable components. As for non-separable filters, they are twisted counterclockwise using the key. Remove the old detail by reloading it counterclockwise. If problems arose during dismantling, use a special removal puller. This device is sold at any store. If you do not have the tool, you can use a piece of bicycle chain by wrapped it on the filter body. Or pate the device with a screwdriver in place closer to the bottom, away from the thread so as not to damage the engine components. The tool will be used as a lever. Before installing a new filter, fill it into it about 100-1500 grams of fresh oil and treat a grease with a rubber band near the thread. Install the filter device, but do not tighten it.
8. Unscrew the plug of the fuel neck and fill fresh lubricant into the system. It is convenient to use a funnel to add fluid to the power unit. Fill the required amount of consumable material, regularly controlling the level of fluid in the lubricant system by probe. After the bay, run the machine's motor for a few minutes, let it work on idling. Stop the OI and check the lubrication level again. If necessary, add the oil. Replace the motor crankcase pallet protection.

Maintenance of the car Hyundai Accent is a list of mandatory repair work to maintain the initial state of the vehicle. One of important procedures That is a replacement or top of the oil into the car.

The main task of motor oil is to prevent the wear of parts and mechanisms for their further correct operation. Consider which oil to fill in the engine Hyundai accent. In order to comprehensively understand this issue, you need to have information about the peculiarities of certain types of oils.

Features of various types of oils

The operating surfaces of the engine are constantly in friction, which contributes to the gradual wear, the formation of scaling, cracks and many other problems. High temperatures constantly affect the engine details, especially when it works on full power.

The engine of the car operates in constantly changing conditions ambientAs a result, metal corrosion occurs, which has destructive power. Sozha and Nagar, formed during fuel combustion, negatively affect the motor as a whole. High-quality engine oil helps to cope with such problems: lubrication of surfaces of parts, decrease in friction force, ease of movement, cleanliness of parts from car and soot, removal of combustion products.

Lubrication of the surface layer of engine elements protects them from corrosion. Therefore, experts leading oil producers continue to work on their quality, trying to achieve improvements so that each component becomes special and unique. Several types of motor oils differ:

• mineral;
• synthetic;
• semi-synthetic.

Mineral engine oil is a natural oil product. Synthetic - obtained as a result of synthesis. Semi-synthetic - engine oil made from mixing mineral and synthetic. Each motorist should know: the synthetic least is exposed to the action of low temperatures and overheating, longer holds its features during operation.

Drivers are seen on the instrument panel temperature pointer and consider it an indicator of the engine heating, but this reading belongs to the cooling fluid. Its temperature in a heated engine is stable and reaches approximately 90 °. Motor oil temperature fluctuates and can reach 150 °. This mark depends on the revolutions and the intensity of movement.

The optimal volume of engine oil should provide maximum efficiency at a minimum of wear of the engine parts, taking into account the effect of ambient temperature. A variable number of engine oil is viscosity. Thanks to her, the oil is capable of lingering on the surface of the engine nodes and maintain fluidity. It must be a certain viscosity and correspond specifications cars. For each motor - its optimal viscosity norms, which is an individual indicator for cars.

The semi-synthetic - has constancy of characteristics. It is better than mineral, but below the synthetic properties. The semi-synthetic is proposed to fill in the engine of a modern car with significant mileage. There are certain queries for the chemical composition of motor oils, so when mixing them can occur chemical reactionAnd it is not known how additives used in these oils themselves will behave.

Mixing engine oils is an exceptional measure. It is resorted to it if lubricants From one manufacturer, and transition from one species to another. The topping of another engine oil is allowed if the driver will remove this mixture from the motor as soon as possible. When replacing some minimum amount, it still remains in the engine, so it will reasonably change the oil a little more often than the service cycle of the replacement indicates.

The need to replace oil in the engine occurs from each driver repeatedly. To correctly fulfill all the work on replacement, you need to adhere to some rules, strictly take into account the year of release and technical condition Motor at the time of the procedure.

When running a new engine, you need to adhere to the indications of the model manufacturer. Officon is a very important point, it affects the engine performance and is 5000-7000 km. At this time, the driver should not exceed the permissible speed and overheating of the motor.

Changing oil after running, it is impossible to save on it, it can pour out in expensive repairs. Auto with mileage requires a thorough examination: if additional noises appeared, the oil consumption increased. If the motor works clearly, then you need to maintain a certain level of oil, add it more often if necessary.

Car enthusiasts believe that the less often to exploit the car, the longer its engine will remain at the initial level. This opinion is mistaken. If the engine is rarely created, a condensate is created that disrupts the composition of the oil and creating an acidic medium, thereby destroy the parts of the motor. Replacing the oil is not associated with a downtime of the car and an increase in its service life.

It means that the car must often be in motion, then the engine parts will be saved, and the operating duration of the car will increase. If the driver loves extreme driving conditions, then the car will require close attention and care. The oil should be high-quality, semi-synthetic or completely synthetics.

We should not forget to change the oil for the winter-summer seasons, taking into account the climatic environmental conditions. Qualitative - extends the service life of the engine. Low gasoline quality with impurities that are located in it, affects the composition of engine oil, so when choosing, which oil is pouring into the car, do not save on quality.

Features and procedure for replacing oil

Hyundai Accent - Compact, convenient vehiclewhich is intended for comfortable movement in the conditions of the city. The model has a dynamic exterior, plastic suspension, easy control and powerful engine. But what oil to fill in the engine Hyundai accent?

The engine requires attention and use of high-quality consumables. Oil change is made from 10,000 to 15,000 km of run or every 6 months. This tool is more likely producing its resource if the Hyundai Accent car is often forced to move in urban mode, operated on idling Due to parking in traffic jams, overcome small distances.

Therefore, all car enthusiasts that use cars in the city is best to replace oil and filter every 10,000 km. The procedure is better to start after the engine warming up: this is idling or a small trip. After that you need to turn off the ignition of the machine and raise the car onto the car lift or install on watching pit.

On the engine cover - the plug hole, you need to turn the plug. Next, the pallet protection is removed and the plug is unscrewed through which oil drops into the prepared container.

A merged fluid must be checked for the presence of small chips from the metal, sawdust. After leaving the oil, the drain hole wipes dry with a rag, the plug is spinning. Collection with produced oil moves under the oil filter, closer to the edge of the motor.

On Hyundai Accent cars, there are 2 types of filters: non-interconnected metallic and replaceable. Having understood what exactly installed in your case, choose one of the options for dismantling it.

1. Untreated is unscrewed counterclockwise with the key. Wash the place of his landing with dry rag. New element Must be identical to the shot old, visually check it out. Sealing a new spare part with a motor oil and attach to the block. Track the subteps through the gasket, they should not be.
2. Replaceable filter is removed by unscrewing the bolt on the cover cover. Be sure to do the inspection of both replaceable elements, and if they are the same, then the sequence of actions is repeated, as when replacing unbearable parts.

Through the bay neck, pour motor oil and after a while checking its level to the dipstick. You need to make sure that the level is sufficient, then wrap the neck stopper. Check the tightness of the system, drive a small distance by Hyundai Accent, check the absence of inclusions, stop and re-check the level of engine oil.

Consumption completely depends on the correctness of the routing engine accent and is 0.2 liters per 1000 km. The largest consumption for technical specifications can be 1.5 liters per 1000 km.

Possible causes of oil consumption

Factors affecting oil Hyundai. Accent:

• overflow will lead K. big flow, so the ventilation system of the crankcase is out of the engine unnecessary;
• leakage of corrosion chips and uneven places;
• increased spending is associated with high speeds during the Hyundai Accent motor running period;
• viscosity is taken into account at consumption: with a high viscosity indicator, the combustion of the product is slower;
• wearing the elements of the engine - oil-challenged caps, the lumen of the guide sleeve and the valve rod, the rings of pistons having a deformation.

Many car drivers Hyundai Accent want to know how much fuel oil and whether the motor eats it. Oil consumption is determined as follows: it is necessary to pour it to the maximum label, after a run of 500-1000 km to pour out of the measuring tank to a high tag, then you can find out if the engine eats the engine or not.

Specialists argue that even the only engine overheating is quite enough, and the car will eat oil in large quantities. But the main cause of consumption, many consider oils of oil. The more pistons in the motor, the more he eats the engine oil. If the reasons for the motor oil flow can not be corrected independently, then the car enthusiast should turn to a service station, where careful diagnosis is carried out, because of which the machine eats as much oil, and the subsequent repair of the motor.

The leakage of oil can go from the valve cover, due to the compaction of the oil plug, the gaskets of the GSB, the oscilves of distribution and crankshaft, oil filter, crankcase pallet laying. All these leaks can be seen visually. If these reasons for visual inspection are not confirmed, it means that the engine eats oil due to wear of the rings of pistons or oil-challenge caps, as a result, a strong selection of white and black color from the muffler will appear.

Rhythm and quality of the vehicles are in full dependence on the suitability of all nodes and mechanisms, the main of which is the engine. It is necessary for its elements special oil. By his flow, you can judge the total condition of the car. Engine developers are trying to reduce Hyundai Accent Motor Consumption Indicators, but it is not possible to reduce this indicator.

Engine is part of the car that most needs lubrication. How to choose suitable oil? After all, the range is so great. Shelves of shops are literally stuck with a variety of canines and banks. What oil to fill in Hyundai accent?

Oil selection: Parameters

There are two ways to answer this question.

• Option first. If you do not want to go into technical subtletiesThe easiest way to follow the recommendations of the manufacturer. Hyundai considers optimal Shell Helix. Ultra 5W30.
• Option second. If a person fell to his car and wishes to extend his service life, then it is worth learn more about engine oil, especially about facts that are not lying on the surface.

Without risk damage parts of the engine can only be applied technical fluidswhich strictly correspond to the parameters given by the manufacturer. They are described in the manual of operation to the car. The main characteristics of the engine oil are viscosity and quality class.

Viscosity

The ability of the oil film to remain on the surfaces of the engine nodes, while maintaining the fluidity, is viscosity. As a rule, the largest digits on the canister indicate exactly this parameter. By sAE classification (Society of Automobile Engineers) These are two numbers separated by the letter W.

The first digit is hidden the minimum operating temperature. For example: Marking 0W-40 indicates that the oil is applicable to -35c, for liquid with a characteristic 15W-40 This parameter -20c.

The second number shows a minimum viscosity when operating temperature (100 ° C). How this figure is more, the oil is more viscous. For a new engine, the lubricant is suitable, if the mileage exceeds 100 thousand, then it is better to fill the oil.

Quality class

The classification of quality was developed by the American Fuel Institute (abbreviated API). Denoted by two letters.

The first is determined by the type of engine: gasoline or diesel. For the first - S, for the second - C. If the oil is universal, then it carries the S / C mark.

The second letter - level performance characteristics. Standard increases as the letter removed from the beginning of the alphabet. Today, the most rigid are Sn for gasoline units and CF for diesel.

If the class of quality class is not detected on the canister, the oil has not passed the checks and did not receive the API certificate.

Who approved

Sometimes there are inscriptions on the canister, claiming that the oil is suitable in front car Markam. Such messages can be divided into two categories. The first: oil really passed all strict automaker checks. The second: the inscription is only dust in the eyes and no essentially reflects.

How to distinguish them? Only approced inscriptions are valid (approved) and no others. If MEETS Hyundai is written, then this does not mean that this liquid - best oil For Hyundai Accent. Such a product only meets basic requirements. And this statement is not an automaker, but the manufacturer of oil.

Structure

Most often, manufacturers do not advertise the composition of the lubricant. Only a chemical basis is indicated. It can be mineral, semi-synthetic and synthetic. Minerals are considered obsolete, they are strongly inferior to the synthetic in economy and do not stand very low temperatures. Many are interested in which oil into the engine of the accent is poured at the factory. Mineral. Most likely, this happens only from savings: it is cheapest.

Best oil - synthetic. Synthetics exceeds mineral water in all operational parameters, reduces fuel consumption and reliable protects the engine units. For modern cars It is definitely preferable. In addition, the mineral water class is higher than the SJ is almost impossible.

What oil focus is better

In essence, the canisters of various brands with the same operational indicators and comparable price tags are almost no different. If the goals saved in whatever, it is not worth it, it is better to pour the oil recommended Hyundai - Shell Helix.

But it is important to remember that the products under this brand, as well as other famous companies, are often formed. It sounds wild, but sometimes even the stores themselves cannot say with one hundred percent confidence that they have the original on the shelves. In order not to buy a liquid of unknown origin, it is only extremely intently to study individual canisters.

It is hard to identify a fake, having bought a few canister with the "same" butter sometimes you can notice with horror that there are no two among them the same. Each little thing plays a role. If the uneven seams have noticed on the plastic, the crookedly planted cover or label, it is better to refuse to buy. Pay attention to the presence of holograms and the date of manufacture. Her numbers should be clearly pricked.

Unfortunately, the panacea does not exist. But to a greater degree to secure your car, only buying products on the branded gas stations.

Cheap products

Simplifying, it can be said that the main advantage of expensive oil over cheap is in greater wear resistance. It retains its properties longer. If the domestic product of the lowest price segment comes in disrepair of 10 thousand, then his expensive analogue to 15. That's the whole difference.

In this case, it is obvious that it is better for the motor. But if the choice lies between the change of cheaper oil every 8 thousand or expensive every 15, then the winning position is the budget lubricant. Although there is no savings in this case, the engine works freely and its resource increases.

Oil resource

Come to the most interesting. Hyundai declares that the change of engine oil should be carried out on time, which means 15 thousand kilometers every time. Naturally, this term is too large. Everyone who has changed the oil at least once, a black liquid that does not have anything in common with just poured out of the canister. Why autoconcens sets so long replacement intervals? There are several reasons. Perhaps this deliberately decreases the resource of the car. But most likely, they only go on the manufacturers of oils that are overwhelming oil service for advertising purposes.

In this regard, it is reasonable to neglect the manufacturer's recommendations and reduce the interservice interval. To track the periodicity of the replacement can be used by regular inspection of the probe. If the oil accent is overly dirty and thick or poured like water, it is necessary to change it. In any case, the replacement period is preferably reduced by at least twice, if you are going to ride a car after the warranty expires.

By the way, for cars under strict operating conditions, Hyundai provides for a replacement of oil every 7500 km. Heavy use includes:

• Movement on a strongly dusty or mountainous area.
• The conditions of broken bumpy roads, or water filled.
• The average monthly temperature is higher than 30s or below -30C.
• Long operation in idle mode.
• Short trips at low air temperature.
• Frequent braking and stops.
• Towing trailer.
• Use of a car in commerce (taxi, hire).
• Long-term motion at speeds above 120 km / h.
• Operating a car by special services.

Therefore, even the casual ride on the car in Russian conditions should equate to hard exploitation! Consequently, the recommended replacement of Hyundai oil accent in this case is carried out at least once every 7500 km.

Wash engine

There is a common myth that it is impossible to rinse the motor before replacing the oil. Many people think that the remains of washing spoil fresh oil. But the same can be said about the exhaust lubricant. After all, when replacing, a roughly fifth of the total remains.

So wash the engine or not? Depends on the circumstances. If on the car from the very exit from the conveyor, the oil is regularly changing every 5 thousand km, then there is absolutely no need for this. After buying a used machine and inspection of the probe, in the case when the test looks very dirty, too thick or on the contrary, water, it will be better for the engine before replacing the lubricant.

After draining the motor is allowed on washing fluid About 5 minutes. Then drain it. The procedure is repeated. Only after that the motor is filled to outer normal. After such a replacement, it serves as a third longer.

Hyundai Accent is one of the most sought-after Korean cars in the mid-2000s. The car is determined by experienced and beginner owners. At one time, the demand for this car was record high, and therefore it is not surprising that such cars are now a lot on secondary market. But as you know, even the supported version of Hyundai Accent will delight its owner with high quality manufacturing and reliability. And yet, the issue of opportunity remains relevant here self-service Hyundai Accent. Repair and replacement of consumables in this machine are quite feasible without professional knowledge and experience. In this article, consider one of the most pressing issues related to maintenance. this car - It's how to choose the right high-quality engine oil for Hyundai Accent.

Each oil has its own parameters that need to follow when choosing a long lubricant. The parameters specified on the product label must comply with the parameters specified in the TC operating instructions. For example, the marking looks like 5W-20. This parameter corresponds to certain operating conditions. The value of this encoding will allow you to find out whether such an oil for the engine Hyundai Accent is suitable.

• In the specified encoding, the figure 5 characterizes the properties of turning and pumping oil at the lowest temperatures. The lower this indicator, the engine is capable at a lower temperature, or vice versa.
• Parameter 20, following after the letter W, indicates the minimum and maximum viscosity of the lubricant, while the temperature of the engine is 100 degrees, as well as the minimum viscosity at 150 degrees. The lower the viscosity indicator, the better the fuel economy and more engine power. However, it is important to note that low lubricant negatively affects the reliability of the engine. Fortunately, manufacturers have long decided this disadvantage by using special additives.
• Viscosity parameters should be chosen based on the ambient temperature in which the car is operated. For example, for russian conditions The preferred option will be lubricant with 0W, 5W and 10W values. Based on this, for Hyundai Accent, it is recommended to use a substance with 5W-40 parameters that the products of the following grades have Liqui Moly., ARAL and MANNOL.

Volume of poured oil

The volume of the lubricant is not less an important indicator Not the background of the above parameters. The fact is that the optimal level of the flooded fluid will negatively affect the reliability of the engine, and may cause the so-called oil starvation. Overflow of oil is also undesirable, as it can cause squeezing the glands and seals, as well as the accumulation of oil components that do not have time to burn in the cylinder. As a result, these components turn into mud sediments that settle on surfaces.

Output

Correctly choosing oils, first should be guided by the above parameters, and then pay attention to the brand. By the way, here is the list of the best manufacturers motor lubricants For Hyundai Accent: Zic, Shell, Mobil, Lukoil, Castrol, Rosneft and others.

Video