What engine oil is better for Nissan. Nissan car oil - what oil is inserted into the engine? How to properly replace oil in the gearbox Nissan

14.10.2019

Properly selected oil can significantly increase the engine resource, regardless of which climatic conditions have to operate the car.

We select oil into the engine Nissan

The most important characteristics of automotive oil, directly affecting the engine and wear of the piston group, are:

Viscosity - oil that is optimally balanced by viscosity, easily penetrates all vehicles of the car engine, retains its beneficial features on the whole temperature range, ranging from cold start on a strong frost and ending with continuous intensive use on high revolutions;

Anti-wear properties - Complex climatic conditions of operation of the Nissan car require an increased ability of motor oil to resist undesirable phenomena that destroys the metal surfaces of the nodes and engine parts. Oil must contain additives that impede accelerated wear in extreme operating conditions;

Cleansing properties - The oil must have elevated detergents, dispersing and cleansing properties to prevent the engine clogging by combustion and various sediments.

Nissan gasoline engine oil - right choice

Since the cars of the brand Nissan are produced in Japan, and in Europe, the oil for them has a number of differences. For cars produced in Japan, it is recommended to use the following varieties of engine oils:

The greatest popularity of the owners of Nissan cars received engine oil with a viscosity of 5W-40. Synthetic nissan oil Motor Oil 5W-40, which has excellent antioxidant, detergent and dispersing properties, has greatly proven itself when working in difficult operating conditions and during long trips.

Nissan oil for diesel engine - the best choice

Recommended for use in diesel engines the following automotive oil varieties, which relate to the class of mineral all-season:

Nissan Diesel Oil Turbo x CF-4 / DH-1, having a viscosity of 10W30 - oil for turbocharged Nissan engines.
Nissan Diesel Oil CD EXTRA SAME X with a viscosity of 10W30 and 5W30 - engine oils for Nissan engines;

For those diesel engines Nissan, on which filters capturing solid and fine particles are recommended for use oil motor Nissan. 10W30 and 10W40, characterized by a reduced level of phosphorus, sulfur and ash content. Nissan oil having a viscosity of 5W30 should be poured into cars, the operation of which runs in regions with a temperate or cold climate.

Original and non-original oils for Nissan engines

Each Nissan car owner should always remember that the development of Nissan oils occurs in parallel with the creation car engines. Thanks to such cooperation and interaction, the maximum matching of engine oil is achieved to all the features of Nissan engines.

The main characteristics and features of the original engine oils of the brand Nissan:

Original oil allows you to reduce the wear of parts and friction when the engine is started into a strong cold, as it always has a balanced viscosity;
They make the most effectively lubricate the parts of the engine at high temperatures;
Increase the motor and guarantee the engine longer service life;
Motor oils I. technical fluids Nissan have operating properties, significantly exceeding the requirements of international standards, which makes it possible to recommend them for use in other brands of cars.

Replacing the "native" engine oil Nissan to similar varieties of other manufacturers can significantly reduce the engine resource, cause its premature wear and ahead of time to demand overhaul Piston group. Employees of service centers warn - more than half of all the damasters of the Nissan engines are caused by the use of low-quality automotive oils or its late replacement.

We offer to implement in a hundred carfraud.

The chemical composition of lubricants is optional to study before planned change of car. It is enough to familiarize yourself with Manul to the car. In this documentation, the manufacturer describes the parameters of the recommended engine oil for Nissan Almera..

Nissan Almera Classic B10 2006-2012 release

If we consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating mixtures that meet the requirements:

original automal company Nissan;
in accordance with the API classification, the type of oil SH, SJ or SL;
according to the ILSAC standard - GF-3;
the viscosity of the lubricant is selected according to Scheme 1;
approximate volume of the mixture for replacement with regard to oil filter It is 2.7 l (without filter - 2.5 liters).

The approximate volume of the car is designed based on a fusion lubricant, excluding motor mixremaining after the drain in the motor.

According to the Regulations, you need to use motor mixtures:

if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
for temperature mode from -10 ° C to +25 ° C poured 20w - 20;
from 0 ° C to +30 ° C (or more) Apply SAE 30.

QG 15DE 1.5 L and QG 16DE 1.5 L and QG 16DE - operate on gasoline.

Nissan Almera N16 2000 - 2006 release

nissan's original lubricants;
according to the API classification - the type of oil SH, SJ or SG (prohibited the use of API - CG-4);
according to the ILSAC standard GF-I, GF-II, GF-III;
quality class for ACEA - 96-A2;
the viscosity of the lubricant is selected according to Scheme 2;
the approximate volume of the engine mixture for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

Gasoline power units - QG15DE 1.5 L and QG18DE 1.8 l.

at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 are poured (automation helps reduce consumption fuel mixes car);
in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W-30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

branded engine fluids Nissan;
quality class by ACEA - A1, A3 or A5
according to the classification of API -SL or SM;
vissedy parameters motor fluids selected according to Scheme 3;

The approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

According to the regulations, it is necessary to pour motor fluids:

in the temperature range from -30 ° C to +40 ° C (and above), 0W-30, 0W-40 is poured;
if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W-30, 5W-40;
with the thermometer indicators from -25 ° C to +40 ° C pour 10W-40.

Preferably, apply 5W-30 oil.

Conclusion

Recommended motor oil For Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. Pouring a more thick or liquid car worsen performance features power aggregatewill lead to his breakdown.

Manufacturers lubricants Use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. That the machine is a certain brand suitable for specific model Machines may testify to the canister tolerances. At the same time, the mixtures for the summer, buy more viscous than for the winter.

Look interesting video According to this topic:

Nissan Almera Classic B10 2006-2012 release

QG 15DE 1.5 L and QG 16DE 1.5 (6 L and QG 16DE 1.6, operating on gasoline.

If you consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating fluidsCommitable:

original automal company Nissan;
in accordance with the API classification, the type of oil SH, SJ or SL;
according to the ILSAC standard - GF-3;
the viscosity of the lubricant is selected according to Scheme 1;
the approximate volume of oil for replacement with regard to the oil filter is 2.7 liters (no filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the lubricant remaining after the drain in the motor.

Scheme 1. The dependence of the viscous parameters of the machine from the ambient temperature.

According to Scheme 1, you need to use motor lubricants:

if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
at temperature mode from -10 ° C to +25 ° C poured 20w - 20;
from 0 ° C to +30 ° C (or more) Apply SAE 30.

Nissan Almera N16 2000 - 2006 release

Gasoline power units QG15DE 1.5 L and QG18DE 1.8 l.

nissan's original lubricants;
according to the API classification - the type of oil SH, SJ or SG (prohibited the use of API - CG-4);
according to the ILSAC standard GF-I, GF-II, GF-III;
quality class for ACEA - 96-A2;
the viscosity of the lubricant is selected according to Scheme 2;
the approximate volume of engine oil for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

Scheme 2. Selection of the viscosity of the engine fluid depending on the temperature beyond the car.

According to the Scheme 2, the manufacturer is recommended to pour:

at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 poured (the car helps to reduce the fuel mixture consumption by car);
in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W - 30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

branded engine fluids Nissan;
quality class by ACEA - A1, A3 or A5
according to the classification of API -SL or SM;
the viscous parameters of motor fluids are selected according to Scheme 3;
the approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

Scheme 3. Selection of viscosity in the temperature of the region in which the car is operated.

According to Scheme 3, it is necessary to pour motor fluids:

in the temperature range from -30 ° C to +40 ° C (and higher), 0W - 30, 0W - 40 are poured;
if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W - 30, 5W - 40;
with the thermometer indicators from -25 ° C to +40 ° С pour 10w - 40.

It is preferable to apply oil 5W - 30.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. The fill of a more dense or liquid car will worsen the performance characteristics of the power unit, will result in its breakdown.

Manufacturers of lubricants use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the car for the summer, they buy more viscous than for the winter.

History model Row Almera from Nissan begins since 1995 with the release of the first generation of the car. Almer N15 was produced specifically for the European market and quickly occupied a vacant niche among budget cars C-class. The 15th model series was designed to oust outdated Nissan Sunny and, according to its own data, Nissan Pulsar repeated. Popularity to the car came for its highest quality assembly and excellent driving performance. All this was complemented by a pleasant price and a comfortable interior, thanks to which the novelty was perfectly fit into a competitive struggle on the market on a par with Honda Civic, Skoda Octavia, Mitsubishi Lancer, Toyota Corolla and Opel Astra.

Belonging to the category "Golf" was confirmed by the installation under the hood of ordinary rank fours to 2000. So, the first Almera was completed with gasoline aggregates with a working volume of 1.4 and 1.6 liters, as well as one 2-liter diesel enginewho soon got acquired petrol analogue. The power of the installations ranged from 87 to 143 hp, at the same time they were unpretentious to oil. About how oil was flooded in engines and how much, you can learn further in the article. Generation N15 was produced in 2 stages: from 1995 to 1998 and from 1998 to 2000. Basically, the version was distinguished by changes in appearance.

In 2000, the 15th almers took place in the N16 generation. Serial production lasted until 2006 and provided for the release of the model in sedan and hatchback bodies for 3 and 5 doors. The first update was held in 2003, after which the car received a new bumper, new headlights and replenishment of the engine line 1.5-liter diesel. Gasoline modifications included versions of 1.5, 1.8 liters, as well as turbodiesel with a volume of 2.2 liters. FROM automatic transmission worked only motor 1.8, and everyone else got mechanical boxes Transmissions.

Generation N15 (1995 - 2000)

Nissan GA16DE 1.6 l. 99 hp

Oil types (viscosity): 5W-30, 5W-40, 10W-30, 10W-40
How many oil liters in the engine (total volume): 3.2 liters.

Engine Nissan SR20DE / DET / VE / VET 2.0 l. 143 hp

What engine oil is poured from the plant (original): Synthetic 5W30
Oil types (viscosity): 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, 10W-40, 10W-50, 10W-60, 15W-40, 15W-50, 20W-20
How many oil liters in the engine (total volume): 3.4 liters.
Oil consumption per 1000 km.: Up to 500 ml.
When to change the oil: 7500-15000

Similar articles: