Act of equipment inspection. Act of the technical condition of the Equipment Terms of provision of services

10.03.2020

Reading time: 3 minutes

The rules and procedure for technical inspection of self-propelled machines, and which include tractors, road-building and other machines, including off-road vehicles with DVS and trailers for them, are determined by a separate decree of the Government of the Russian Federation (dated November 13, 2013 No. 1013). The inspection of self-propelled machinery and tractors is made by state technical supervision authorities. For this type of technology, the rules are somewhat different from those installed for cars.

What is checking Gostekhnadzor

In accordance with Resolution No. 1013, the procedure is carried out by Gostechnadzor. Inspection includes verification:

documents;
the fact of payment of state duty;
compliance with the data specified in the documents (machine identification);
technical status (Except for machines whose age is less than 1 year).

The inspectors are checking:

windshield ();
side constipation of trailers;
the residual height of the soils (for tracked vehicles - at least 1 cm) and tread wheels of trailers (at least 1 cm);
caterpillars - for the presence of cracks and disks - for the presence of welded seams;
caterpillars - on sagging chains (no more than 65 mm);
level of smoke of exhaust gases;
dirt fruit aprons and mudguards (no unacceptable);
protective casing of rotating and moving mechanisms;
fixation of control levers;
compliance rechargeable batteries.

All requirements are enshrined by the provisions of the guests, the discrepancy that threatens with refusal to issue. Gostekhnadzor about technical inspection self-propelled machinery And the timing of it extends information through its regional sites.

Order of passage

Where to pass the inspection

It is carried out on time and places defined by the state-stance authorities of the constituent entities of the Russian Federation. The place where the inspection of the tractor is undergoing, appointed, based on the periodicity established by the rules, the number of registered machines, their actual finding and seasonality of use. Information is given on the official website.

The procedure does not depend on the place and can be performed:

at the location of the Gostechnadzor authority;
at the location of the technician.

It is planned from February to August inclusive. When choosing a date and time, weather conditions are taken into account, the availability of specialists and the corresponding material and technical base.

For seasonal special equipment, the deadlines are installed in 15 days before the start of a certain type of work, and for the transport of agricultural, from February and to June inclusive.

The formation of the technical condition of the equipment occurs in cases where it is necessary to certify the performance of any devices or technology.

Files

The role and purpose of the act of technical condition of equipment

Most often, the act of technical condition of the equipment is necessary at:

equipment reception for further use;
leased it;
audits of the property of the enterprise;
his write-off.

The act contains information about the external and inner state of equipment identified defects, breakdowns, marriage, as well as information about measures to be taken to eliminate them, and required for this time. If the equipment is not subject to repair, it is also reflected in the act.

With the help of an act, several important issues are solved:

It shows the technical condition of the equipment, its suitability for operation.
Sometimes on the basis of this document, claims to the supplier, tenant or equipment owner are drawn up - especially in cases where malfunctions are formed, leading to material damage or accidents in production.

Thus, the act is a very important document. It is necessary to relate to its preparation carefully, describing all the nuances of the state of the equipment in detail. In the future, this may afford to avoid unreasonable claims and, in the event of abnormal situations, to quickly establish the guilty person.

Creation of the Commission

In order to monitor the technical condition of the equipment, you need to collect a special commission from competent specialists. It usually includes regular employees of the organization: equipment, engineers, installers, electricians, etc. (Depending on the type of equipment that is subject to control).

In some cases, third-party experts are invited, especially if it requires the specifics of the object being checked.

The Commission is appointed by a separate order of the Director of the enterprise.

Methods of work of the Commission

Members of the Commission must have a certain, often highly qualified. This is due to the fact that in the process of studying the technical condition of the equipment, they have to get acquainted with the design and technical documentation, disassemble and collect instruments, conduct tests, analyze the amount of upcoming work (for example, if the equipment requires further serious repair). All this information is entered into the act.

General moments and features of the compilation of the act

If you have a task of examining the equipment and drawing up an act of its technical condition, see the data below the recommendation and read the sample document.

Before moving to the description of this particular act, we give some generalcharacteristic of all such papers. To date, the standard forms of primary documents are abolished, so that representatives of companies can write them in an arbitrary form - this concerns the act of technical condition of the equipment. At the same time, if in your organization there is an approved template of such a document, it is better to follow him - this will save time and relieve from the need to break his head over its composition and text.

The act is allowed to write on the company's brand blank or on a clean sheet of any suitable format (usually this A4), by hand or on a computer. When making information, it is necessary to try to prevent inaccuracies, blots and corrections - in the future they can play a negative role in the establishment of the legality of the document.

Another important requirement that should be taken into account is obligatory - to assure a form of autographs of all members of the Commission present at the certificate of the technical condition of the equipment.

Printing on the form you need to put only when item about its use for this kind of papers is enshrined in the organization's accounting policy.

Act is written in several copies - one for each commission of the Commission. Information about the act must be included in the special accounting log.

After drawing up, the act should be inserted into a separate folder along with the other such documents, and after the storage period expires - to dispose of the algorithm established in the law.

Example of an act of technical condition of equipment

Formulating the text of the act, consider that it must meet the definite rules of business documentation.
At the very beginning, the act is the so-called "hat" - here fits:

the name of the organization that conducts an equipment survey;
title of the document;
date and place (locality) of its compilation;
commission composition, i.e. Positions, name-name-names of representatives of the enterprise participating in this procedure are written.

identification parameters of equipment (brand, model, series, year of manufacture, manufacturer's room and inventory, installation site address, etc.);
activities conducted to verify the technical condition of the equipment;
information on identified faults, defects, damage, as well as opportunities, timing and options for their repair;
test information (if held).

If necessary, this part of the form can be expanded (depending on the needs of the Commission's participants and the individual characteristics of the object). Include, all additions attached to it are made (for example, a technical passport).

In conclusion, members of the Commission conclude on the technical condition of the equipment and sign an act.

Tractors and self-propelled machines are a very popular and common type of technical means not only in agriculture, but also in almost all industries, construction and communal service. They are endowed with low speed, but have a significant strength of thrust and a common mass. Therefore, the tractor and self-propelled machines are recognized by vehicles, the use of which in a technically faulty state bears increased risk. Such equipment required for all owners is the annual passage of technical inspection. All the details are further in this publication.

The latter, current rules for conducting technical inspection of self-propelled machinery and other types of equipment registered by the Government bodies, were approved by the Decree of the Government of Russia of November 13, 2013 No. 1013, and came into force on November 26 of the same year.

They relate to tractors, self-propelled agricultural, reclamation, road-building and other self-propelled machines and trailers to them, which were registered by the state-stance authorities. Off-road wheelboards are excluded from this list: in the conduct of state administration authorities, the inspection of self-propelled equipment was left from the category "A-I" only on the tracked propulsion (these are snowmobiles).

The reverse side of the certificate of passage of inspection.

Wheel Motts and Snow Boots related to the category "A-I" must undergo inspection as cars - at the points of instrumental control (peak) that are accredited points of state inspection and have equipment for motor inspection motorcycles. The frequency is the same as cars: the first 3 years - the inspection is not needed; from 3 to 7 years - inspection every two years; From seven years - annually.

The frequency of inspection and responsibility for evading him

For tractors, the frequency is another. Many newly new owners of the new tractor or self-propelled machine are confident that in the first three years of its use of technical inspection, it is not necessary, as it is installed for cars. But this is not the case: by law, the inspection on the tractor must be updated every year, regardless of its age. Moreover, the certificate of passage of technical inspection should be obtained even on a new one, just a purchased tractor, immediately after its registration in the Gostechnadzor. Checking its technical condition in this, the first time, not produced.

Most often, the inspection suggests off-road owners motor vehicleswhich are designed to transport passengers and have the driver's seat, more than eight seating. They were decided to inspect every six months.

The objectives and objectives of the technical inspection of the state starnice were announced. First: to find out the correspondence of the state of tractors and self-propelled machines during operation of safety standards established in Russia. Secondly, the maintenance of statistics of the number of tractors and self-propelled machines operated in each region of the Russian Federation, refinement of other registration information. Fourth, prevention of various offenses. For example, unauthorized constructions carrying a potential danger; Using stolen nodes and aggregates, etc.

Evasion from the technical inspection of the tractor announced violations of the norms that ensure the safety of life and health of citizens, the safety of their property, guard ambient. Therefore, the use of equipment, not last technical inspectionwill lead to the application of administrative effects in accordance with paragraph 9.3 of the Code of the Russian Federation on administrative offenses. This is a fine (for the first time) and deprivation of rights (and both on the tractor and on the car) for up to 6 months (with a re-violation of this rule by the same person). The fine is small, but its size is constantly increasing, following inflation.

The terms and venues of the annual technical inspection in each subject of the Federation are determined by each year by the local government of the State Administration independently - taking into account the number of registered machines, seasonality of their use and other factors specific for each region.

Taking into account the low-speed trocitors and self-propelled machines, the inspection inspector produces a state inspector engineer, leaving the farms to the actual location of the machines. Information about the timing and places of these vents on technical inspections The owners of the equipment can receive on the official pages of local offices of the State Technical Support on the Internet.

You can go through the technical inspection of the machines at the location of the local inspection of the Gostekhnadzor, if it is convenient for the owner, having previously coordinated it by phone with the inspection. It will cost a little cheaper than inspection inspection engineer.

A few years ago, it was assumed to create mobile mobile posts of instrumental control, on the basis of trucks, on which the inspectors of the State Adhesive and drove around the farms. But, since the cost of such a post was about 800 thousand rubles, and the situation in the country's economy becomes more complicated, this idea "was removed into a long box."

The inspector engineer follows a definite instruction that defines such a plan: checking documents for a tractor; the fact of payment of the state duty for inspection; compliance of the actual data of the machine specified in the documents on it; And, most importantly - technical condition (except for new tractors and machines). As at the vehicle inspection, the focus is on checking the operation of the steering and the tractor brakes.

Roof serviceability - in priority. Brakes too.

Rules for the technical inspection of self-propelled machinery and other types of equipment registered by the state supervision of their technical condition

Approved
decree of Government
Russian Federation
november 13, 2013 N 1013

1. These Rules establish the procedure and frequency of technical inspection of self-propelled machines and other types of equipment registered by the state supervision of their technical condition (hereinafter referred to as state administration).

In this rules under self-propelled machines and other types of equipment (hereinafter - machines), tractors, self-propelled road construction and other machines are understood, with the exception of wheel off-road motor vehicles that have an internal combustion engine with a volume of more than 50 cubic meters. Santimeters or electric motor with maximum capacity of more than 4 kilowatt, trailers to them.

2. The technical inspection of the machines is organized and is conducted by the Government bodies.

3. For the issuance of documents on the passage of technical inspection of machines, the state duty is charged in sizes and the procedure that are established by the legislation of the Russian Federation on taxes and fees.

4. The requirements of individual species during their technical inspection are subject to requirements (including parameters) for technical inspection to the machines of individual species, according to Appendix (hereinafter referred to as security requirements).

5. Machines are subject to technical inspection with the following frequency:

a) off-road vehicles intended for the carriage of passengers and having in addition to the driver's seat more than 8 seats - every 6 months;

b) the rest of the cars - annually.

6. The first technical inspection of the machines is carried out immediately after their registration by the state-stance authorities.

With regard to machines, from the date of manufacture of which no more than one year passed and which were not in operation (with the exception of off-road vehicles intended for the transport of passengers and having in addition to the driver's seat, more than 8 seats), the first technical inspection is carried out without checking their technical condition. With the issuance of a certificate of passing a technical inspection provided for in paragraph 12 of these Rules.

Subsequent technical inspections of machines are carried out (by choosing the owner of the machine):

in a place, a day and during the constituent body of the State Student of the Russian Federation, based on the periodicity of the technical inspection of machines established by these rules, the number of cars registered by the specified organ, their location, seasonality of use and availability for technical inspection. This information is posted on the official website of this body in the information and telecommunications network "Internet";

at the location of the Gostechnadzor authority, regardless of the place of registration of cars in agreed with the specified body and time.

7. Conducting a technical inspection includes:

a) verification of the availability of documents provided for in paragraph 8 of these Rules, as well as information on the payment of the state fee for issuing a document on the passage of technical inspection of the machine;

b) checking the compliance of the data machines specified in the documents submitted and the identification of machines;

c) checking the technical condition of the machines (with the exception of machines in respect of which, in accordance with paragraph 6 of these Rules, the first technical inspection is made without checking their technical condition);

d) Registration of documents on the passage of technical inspection.

8. To pass the machine's technical inspection, the car owner or his representative (hereinafter - the applicant) represents the machine and the following documents:

a) a document certifying the identity of the applicant;

b) power of attorney or other document confirming the powers of the representative of the car owner (for the representative of the owner of the car);

c) a document confirming the applicant's right to managing the machine presented for the passage of technical inspection;

d) certificate of car registration;

e) insurance policy of mandatory civil liability insurance owner vehicle (In cases where the obligation to insurance for civil liability of the vehicle owner is established by federal law).

9. Information on the payment of the state fee for issuing a document on the passage of technical inspection of the machine GOSTECHNAZOR body receives using unified system Interdepartmental electronic interaction.

The payment document of this state duty may be submitted to the authority of the State Adjacent Applicant on its own initiative.

10. In the event of failure to submit the documents stipulated by paragraph 8 of these Rules, in full, or the lack of information on the payment of the state fee for issuing a document on the passage of technical inspection of the machine, or the inconsistency of the machine indicated in the documents submitted, the technical condition of the machine is not carried out and A technical inspection certificate is drawn up, provided for in paragraph 12 of these Rules.

11. Technical diagnostics are carried out by methods of visual, organoleptic control using funds technical diagnostics, including mobile resources.

Maintenance specifications and lists of technical diagnostics are approved by the Ministry of Agriculture of the Russian Federation.

12. According to the results of the technical inspection of the machine, one of the following documents on the passage of technical inspection is drawn up:

a) certificate of the passage of technical inspection (in case of compliance with the safety requirements);

b) Act of a technical inspection (in case of detection of non-compliance with any of the security requirements, as well as in the cases provided for in paragraph 10 of these Rules).

13. Certificate for the passage of technical inspection acts in relation to:

off-road vehicles intended for the transport of passengers and having in addition to the driver's seat more than 8 seats - within 6 months from the date of issuing it;

other machines - during the calendar year.

In case of loss or damage to the certificate of technical inspection during its term, the appropriate duplicate is issued by the Government authority, which made this evidence, apply for the owner of the car or his representative after receiving the information authority of the State Duty authority in the manner prescribed by clause 9 of these Rules.

The form of a technical inspection certificate is a document of strict accountability and protected printing products of the level "B".

The form of a form of certificate of passage of technical inspection, as well as the procedure for filling, storage and destruction is approved by the Ministry of Agriculture of the Russian Federation.

14. In the event of a non-compliance of the machine, any of the security requirements in the technical inspection certificate indicates the parameters of the machine for which such a nonconformity is established.

The form of an act of technical inspection and the order of its completion is approved by the Ministry of Agriculture of the Russian Federation.

15. The machine for which the technical inspection act is issued is subject to a re-technical inspection.

When presenting a machine for passing a repeated technical inspection within 20 days from the date of registration of an act of a technical inspection, containing information about the non-compliance of the machine to any of the security requirements, the state of the State Specification, which has developed such an act, verification of the technical condition of the machine is carried out only in relation to those specified in this act Machine parameters for which such inconsistency is established.

Annex to the Rules. Requirements (including parameters) presented during technical inspection to the machines of individual species

application
to the rules of technical
examination of self-propelled machinery and other
types of equipment registered
authorities exercising
state supervision for their
technical condition

I. Brake systems

1. Brake systems must comply with the performance of braking efficiency and vehicle stability when braking:

a) for tractors and self-propelled machines - according to paragraph 3.17 GOST 12.2.019;

b) for small-sized tractors - according to paragraph 4.20 GOST 12.2.140;

c) for trailers and semi-trailers of tractor - according to paragraph 5.5 GOST R 52746;

d) for self-propelled road construction machines - according to paragraphs 4.3-4.5 GOST R ISO 3450;

e) for forestry and forestry wheeled tractors, logging and forestry wheeled machines - according to paragraphs 7.5 and 7.6 GOST R ISO 11169;

e) for forestry and forestry crawler tractors, logging and forestry tracked machines - in accordance with paragraphs 6.1.1 and 6.1.2 GOST R ISO 11512;

g) for snowmobiles - according to paragraph 5.3 GOST R 50944;

h) for snow-breasted - according to paragraph 5.3 GOST R 50943;

and) for loaders, stackers - according to paragraphs 3.2 and 4.1 GOST R 51348.

2. The working braking system of tractor trains with a pneumatic brake-driven in emergency (automatic) braking mode must be operational.

3. The leakage of compressed air from the compounds and elements of the brake system is not allowed.

4. Bending brake fluid and (or) a violation of the tightness of pipelines or compounds in the hydraulic braking actuator are not allowed.

5. Corrosion, threatening with loss of tightness or destruction, is not allowed.

6. Mechanical damage to brake pipelines is not allowed.

7. The presence of parts with cracks or residual deformation in the braking actuator is not allowed.

8. Alarms and control tools brake systems, Pneumatic and pneumatic-hydraulic brake drive pressure gauges and fixation device of the parking braking system should be operational.

9. The swelling of the brake hoses under pressure and (or) the presence of cracks on them and the visible shifts are not allowed.

10. The location and length of the connecting hoses of the pneumatic brake drive of tractor trains should exclude their damage during the mutual displacement of the tractor and the trailer (semi-trailer).

II. Steering

11. Changing the effort when turning the steering wheel should be smooth in the entire range of corner of its turn. The inoperability of the steering amplifier (if available) is not allowed.

12. Spontaneous rotation of the steering wheel with a power steering amplifier from a neutral position when the engine running is not allowed.

13. The total backlop backlash should not exceed the limit values \u200b\u200bestablished by the manufacturer in operational documentation, or in the absence of data established by the manufacturer, the following limit values:

for tractors, including small-sized, and self-propelled agricultural machines - no more than 25 degrees;

for snowmobiles and snow-grooves - no more than 15 degrees.

14. Damage and lack of parts for mounting the steering column and the steering mechanism crankcase, as well as the increase in the mobility of the steering parts relative to each other or body (frame), not provided by the manufacturer (in operational documentation), are not allowed. Threaded connections must be tightened and fixed by the manufacturer's method. The backlash in the connections of the riveting tracks and steering knaps and hinges is not allowed. The steering column position fixation device with the adjustable position of the steering wheel should be operational.

15. Application in the steering mechanism and steering part of parts with traces of residual deformation, with cracks and other defects are not allowed.

16. The maximum angle of rotation of the steering wheel (steering wheel) should be limited to devices provided by the machine design.

III. Machine control mechanism on a tracked go

17. The free proof of the arms of control levers of couplings of rotation should not deviate from the values \u200b\u200ballowed by the manufacturer.

18. There must be a complete break of the power flow towards the turn when the control lever is full.

19. The free course of brake pedals should not exceed the values \u200b\u200bestablished by the manufacturer.

20. Various magnitude of the free movement of braking pedals is not allowed.

IV. External light instruments

21. The use of lighting and light alarm devices is determined:

a) for agricultural and forest tractors - GOST R 41.86;

b) for tractors of small-sized - paragraphs 8.2 and 8.3 GOST 12.2.140;

c) for self-propelled agricultural machinery - paragraph 8.6 GOST 12.2.019;

d) for trailers and semi-trailers Tractor - GOST 8769;

e) for snowmobiles - paragraphs 5.2.21 and 5.2.22 GOST R 50944;

e) for snow-born - paragraphs 5.2.21 and 5.2.22 GOST R 50943.

22. Destruction and lack of lightweight diffusers or the use of diffusers and lamps that do not correspond to the type of this light instrument are not allowed.

23. Braking signals (main and optional) should be included when exposed to working and emergency braking systems and operate in constant mode.

24. Installation of light machine lights with red lights or red-factors of red, and rear - white, except lantern rear stroke and the lighting of the registration sign is not allowed.

25. On machines performing work on the construction, repair or maintenance of roads, as well as on machines moving on public roads at a speed of 20 km / h and more and having a width of more than 2.55 meters, special light signals must be installed (flashlight beacons ) Yellow or orange. The number and location of flash beacons should provide their visibility by 360 degrees in a horizontal plane passing through the center of the light radiation source.

V. Wipers and windows

26. Machines having a cabin should be equipped with at least one wiper.

27. The use of wipers and glasses for agricultural and forest tractors, self-propelled agricultural machines must comply with paragraphs 4.1 and 4.2 GOST 12.2.120.

28. Wipers and windows makers must be operational.

29. The glass washer must provide fluid supply to the glass cleaning zone.

Vi. Wheels, tires and caterpillars

30. Wheel tires should have a residual height of the tillage (tread pattern):

a) leading wheels:

not less than 5 mm - for class tractors up to 2 T inclusive;

b) controlled wheels:

at least 2 mm - for class tractors up to 2 T inclusive;

not less than 10 mm - for class 3 T tractors and higher;

c) trailers - not less than 1 mm.

31. Tires should not have external damage (holes, cuts, breaks), exposing cords, bundle of the frame, debriefing the tread and sidewalls.

32. The lack of at least one bolt or nut of the fastening of disks and rims of the wheels is not allowed.

33. The presence of cracks on the disks and rims of the wheels, as well as traces of elimination of their welding is not allowed.

34. The visible disorder of the shape and / or size of the fasteners in the wheels of the wheels is not allowed.

35. Tires in size or permissible load must match the model of the machine.

36. Installation on one axis of tires of various sizes, structures, models, with different tread patterns is not allowed.

37. Tire pressure should not exceed the values \u200b\u200bindicated in the tire marking. The pressure difference in the left and right tires should be no more than 0.01 MPa (0.1 kgf / cm).

38. Schedules of tracked chains of cars on caterpillar It should not exceed the value provided by the manufacturer, and if there is no such value - should not exceed 65 mm.

39. The residual height of the soil machines on the tracked move should be at least 7 mm.

40. The number of links in the left and right track chains should be equally.

41. The presence of cracks and fesoms in the links of the tracked chain is not allowed.

42. The ratios of the red and right tracked chains should not exceed the value provided by the manufacturer, and if there is no such value - should not exceed 5 mm.

VII. Engine and its systems

43. The level of smoke of exhaust gases for tractors, self-propelled road-building and other self-propelled machines with dieselks should correspond to GOST R 17.2.2.02.

46. \u200b\u200bBending and dripping fuel in the supply system of gasoline and diesel engines not allowed.

47. Fuel tank locking devices and fuel overlapping devices must be operational.

48. Machine power system designed to work on a compresented natural Gas, liquefied natural gas and liquefied hydrocarbon gas should be sealed. The external surface of gas cylinders of machines equipped with such a power system should be applied to their passport details, including the date of the current and subsequent examination. It is not allowed to use gas cylinders with an expired periodical examination.

49. Graduation systems Engines must be sound and complete.

VIII. Other design elements

50. Tractors and self-propelled road construction vehicles should be equipped with rearview mirrors on the left and right.

Snowmobiles (except for snowmobiles category S1 according to GOST R 50944) should be equipped with a rearview mirror. Mirrors mounted on snowmobiles must comply with the requirements of clause 5.4.2 GOST R 50944.

Snow-born (except snow-beams of the SB1 category according to GOST R 50943) should be equipped with a rearview mirror. Mirror-mounted mirrors must comply with the requirements of clause 5.4.2 GOST R 50943.

51. The presence of cracks on the windshields in the wiper zone of a glass of glass, located on the driver's side, is not allowed.

52. Cabin door locks, adjustment mechanisms and driver seats fixing devices, a heating device and blowing windshield provided by the design must be operational.

53. Puts of sides of the cargo platform trailers and semi-trailers must be operational.

54. Emergency outputs and devices for their effect, the internal lighting devices of the cabin must be operational.

55. The sound signals must be provided for by the design of self-propelled machines.

A beep when enhancing the control of its control must make a continuous and monotonous sound.

The sound sound level should be within 90-112 dBA with a shoved engine.

56. At the trailers and semi-trap should be installed rear protective devices provided by the design.

57. Tractor trailers and semi-trailers should be equipped with workable safety devices (chains, cables). The length of the safety circuits (cables) should prevent the contact of the coupling loop drawn with the road surface and at the same time ensure control of the trailer in the event of a break (breakage) of the trailer-hitch.

58. Trailers (with the exception of uniaxial and dissolution) should be equipped with a device that supports the hitch with drawn in a position that facilitates the hitch and the crawler with a traction machine.

59. The deformation of the coupling loop or the drawing of the trailer, which disrupts their position relative to the longitudinal central plane of the symmetry of the trailer, breaks, cracks and other visible damage to the coupling loop or the drawing of the trailer are not allowed.

60. Machines must be equipped with safety belts provided by the design. Safety belts should not have the following defects:

a) the gap on the strap visible to the naked eye;

b) the lock does not record the "Language" of straps or does not throw it after clicking on the closing device button;

c) the strap is not pulled out or is not drawn into the retractor (coil);

d) With a sharp stretching strap straps, it does not stop (blocking) of its pulling from the retractor device (coil).

61. Tractors, self-propelled road-building, self-propelled agricultural machines, trailers and semi-trailers should be staffed at least 2 anti-tottack stops.

62. Self-propelled machines must be equipped with no less than one powder or refrigerant fire extinguisher with a capacity of at least 2 liters.

The fire extinguisher must be silent, and it should be specified the deadline for the end of use, which at the time of the check should not be completed.

63. Rechargeable batteries, seats, as well as fire extinguishers and a medical first-aid kit on tractors, self-propelled road-building machines equipped with fixtures for their fastening should be securely secured in places provided by the design.

64. Wheel tractors and machines must be equipped with pelligest wings. The width of these devices should be no less width of the used tires.

65. The lack of vehicles stipulated by the design of dirt fruit and mudguards is not allowed.

66. Fixators of the transport position of the plates of semi-trailers, designed to prevent them from spontaneous lowering when moving, must be operational.

67. Feeding oils and working fluids from the engine, gearbox, side gearboxes, bridges, clutch, battery, cooling and air conditioning systems and additionally installed hydraulic devices is not allowed.

68. A device that is provided for by the design of the self-propelled machine, eliminating the possibility of starting the engine when the transfer is enabled must be operational.

69. Increased movement in moving machines is not allowed.

70. Driving (rotating) parts of machines (cardan, chains, belts, gears, etc.) should be fenced with protective covers.

71. Weakening the fastening of the cab, engine, compressor, starting engine, cladding, working bodies, other design elements are not allowed.

72. The levers of managing the working bodies of machines and guns in the specified positions should be provided with reliable fixation.

73. Installation of additional objects or coating, limiting an overview from the driver's seat, worsening the transparency of glasses, entailing the danger of injury, is not allowed.

Transparent color films can be attached to the top of windshield windshield. It is allowed to use tinted glasses (except for mirror), the light transmission of which meets the requirements of GOST 5727.

74. Replacing batteries used to start the engine engine, as well as battery batteries, voltage, weight or dimensions of which differ from the manufacturer provided by the manufacturer.

75. The structure provided by the design of the device preventing the launch of the working bodies of the machines must be operational.

76. Safety clutches of the working bodies of the machines of the machines must be fit and adjusted.

77. The design of the device for emergency disabling the working bodies must be operational.

78. Static static device design electric charge Must be workable.

79. The imbalance of rotating parts of machines exceeding the value-mounted value is not allowed.

80. Self-propelled machines should be equipped with an emergency stop sign.

81. The state registration sign must be installed on the cars.

The state registration mark should be installed on a flat vertical surface, while the sunbalance of the state registration sign should be excluded, and the state registration sign should not close the external light and light-aign devices and play the side envelope.

The state registration mark should be installed on the axis of the symmetry of the machine or to the left of it in the direction of the machine movement.

82. B. wheel tractors Class 1.4 and above, operating with trailers, a sign "Auto tray" should be installed.

83. B. self-propelled machineshaving a maximum constructive speed of no more than 30 km / h must be installed a "Sourgeless vehicle" sign.

Approved
decree of Government
Russian Federation
november 13, 2013 N 1013

Changes that are entered into acts of the Government of the Russian Federation

1. Clause 2 of the rules for conducting technical inspection of vehicles approved by Decree of the Government of the Russian Federation of December 5, 2011 N 1008 "On the conduct of technical inspection of vehicles" (Meeting of the legislation of the Russian Federation, 2011, N 50, Article 7397; 2013, N 16 , Article 1975), to add words ", unless otherwise established by acts of the Government of the Russian Federation."

2. Clause 5 of the Decree of the Government of the Russian Federation of April 17, 2013 N 348 "On the technical inspection of vehicles of bodies engaged in operational-search activities" (Meeting of the legislation of the Russian Federation, 2013, N 16, Article 1975) to exclude.

Electronic document text
prepared CJSC Codex and drilled by:
Meeting of legislation
Russian Federation,
N 47, 25.11.2013, Article.6099

Electronic services

Full service name

Technical inspection of self-propelled machinery and other types of equipment registered by the state supervision of their technical condition in the city of Moscow

Terms of receipt of the service on the site

Who can apply for the service
- Individuals having a self-propelled machine on the right of ownership or other legal grounds, regardless of the place of registration of the self-propelled machine, which is within the territory of the city of Moscow.
- (Applicants' interests may represent persons authorized by applicants in accordance with the procedure established by law)
- Individual entrepreneurs who have a self-propelled machine on ownership or other legal grounds, regardless of the place of registration of a self-propelled machine, which is within the territory of the city of Moscow.
  (Applicants' interests may represent persons authorized by applicants in accordance with the procedure established by law)
Service cost

For issuing a document confirming the passage of technical inspection - 400.0 rubles

List of necessary documents

information about the document certifying the identity of the applicant;
information on the certificate of registration of the machine;
information about the document confirming the right to control the self-propelled machine presented for the passage of the tractor driver (tractor driver) of the corresponding category);
information about the insurance policy of mandatory civil liability insurance of the vehicle owner (in cases where the obligation to insurance for civil liability of the vehicle owner is established by federal legislation) (with an application of an electronic image document);
the electronic image of a document confirming the powers of the applicant's representative to act on behalf of the applicant (in the event of an appeal to the state service of the applicant's representative), certified by an electronic signature;
an electronic image of a document confirming the payment of the state duty (may be added on the initiative of the applicant).

Terms of service provision

5 working days
The result of the provision of services
- certificate of passing then;
- technical inspection certificate;
- decision on refusal to provide public services.

Terms of receipt of the service in OVI

Who can apply for the service:

Individuals
Individuals having a self-propelled machine on the right of ownership or other legal grounds, regardless of the place of registration of the self-propelled machine, which is within the territory of the city of Moscow. The application for the provision of public services is carried out exclusively in a paper form if the owners of self-propelled vehicles are persons who have not reached 18 years of age.

Legal entities
Legal entities, foreign offices and firms that have a self-propelled machine on the right of ownership or other legal grounds, regardless of the place of registration of the self-propelled machine, which is within the territory of the city of Moscow.

Individual entrepreneur
Individual entrepreneurs registered at the place of residence in the city of Moscow or at the place of stay in Moscow (for a temporary stay), which have a self-propelled car on the right of ownership or using self-propelled vehicles under the lease agreement. The interests of the applicants may submit persons authorized by the applicants in the prescribed manner.
Service cost and payment procedure:

For the issuance of a document confirming the passage of technical inspection - 400.0 rub.
The provision of public services in accordance with the Tax Code of the Russian Federation is charged a state duty. The size of the state duty depending on the type registration action Specified on the information and telecommunication site of the association of administrative and technical inspections of the city of Moscow
List of the necessary information:

Application for the provision of public services (for individuals) (original, 1 pc.)
- Mandatory
- Provided without refund
From December 4, 2017. Reception of applications and other documents necessary for the provision of public services are carried out exclusively in electronic form using the portal of state and municipal services (functions) of the city of Moscow (hereinafter referred to as the portal), except for the case of submission of applications and other documents necessary for the provision of public services. , carried out on paper in the event that the owners of self-propelled vehicles are persons who have undergone 18 years of age.
Application for the provision of public services (for legal entities) (original, 1 pc.)
- Mandatory
- Provided without refund
From December 4, 2017. Reception of applications and other documents necessary for the provision of public services are carried out exclusively in electronic form using the MOS.Ru portal, except when the owners of self-propelled vehicles are persons who have not reached the 18th age. In this case, submission of applications and other documents required to provide the service are carried out on paper.
Document certifying the identity of the applicant (original, 1 pc.)
- Mandatory
Document confirming the powers of the applicant's representative to act on behalf of the applicant (original, 1 pc.)
- Mandatory
- Available only for viewing (removal of copies) at the beginning of the service
It is submitted in the event of an appeal to the provision of the state service of the applicant's representative.
Certificate of registration of the machine (original, 1 pc.)
- Mandatory
- Available only for viewing (removal of copies) at the beginning of the service
Document confirming the right to control the self-propelled machine presented for the passage of the self-propelled machine (original, 1 pc.)
- Mandatory
- Available only for viewing (removal of copies) at the beginning of the service
A drawing certificate of the tractor driver (tractor driver) of the corresponding category is provided.
Insurance policy of mandatory insurance of civil liability of the vehicle owner (copy, 1 pc.)
- Mandatory
- Available only for viewing (removal of copies) at the beginning of the service
It seems in cases where the obligation to insurance for civil liability of the owner of the vehicle is established by federal law.
Terms of service provision

5 working days

Suspension period: 14 business days
The grounds for suspending the provision of public services are:

1. Waiting for the appointed date of the presentation of the self-propelled machine (machines) to carry out that.

The period of suspension of the provision of the state service is provided by the applicant's date and time of the self-propelled machine at the site of the State Adhesiveness of the city of Moscow to the agreed date of the self-propelled machine and does not exceed 14 working days.

2. The need to eliminate the malfunction of the self-propelled machine and submit an application for the passage of a repeated self-propelled machine for 20 days from the date of registration of the technical inspection act on the basis of the administrative regulations for the provision of the service.
The result of the provision of services

Issued:
- Certificate of the passage of technical inspection (original, 1 pc.)
- Decision on refusal to provide public services (original, 1 pc.)
  Signed by an authorized officer and is issued to the applicant indicating the reasons for refusal.
- Technical inspection act (original, 1 pc.)
Happens:
- Making information into an automated information base (New entry in registries, inventories, registry)
Forms of receipt

Through a legal representative

On the Web site

On the rules road № 1090. Resolution from 1993-10-23

About acceptance technical Regulations Customs Union "On the safety of agricultural and forestry tractors and trailers to them" No. 60. Decision from 2012-07-20, NPA, directly regulating the provision of gu

Grounds for refusing to accept documents

The grounds for refusing to receive documents necessary to provide public services are:

1. The submitted statement and documents on the provision of public services do not meet the uniform requirements, the administrative regulations for the provision of services or other regulatory legal acts.

2. Submission of the application on behalf of the applicant is not authorized on the face.

3. Appeal for the provision of state-owned person who is not a recipient of the state service in accordance with the administrative regulations of the provision of the service .

4. Appeal by the applicant for obtaining a state service, the provision of which is not carried out by the State Technical Unitary Enterprise of the city of Moscow.

5. The applicant has an incomplete set of documents provided for by the administrative regulations for the provision of a service as documents subject to the applicant's mandatory submission.

6. The documents presented contain unreliable and (or) conflicting information.

7. The presented documents have lost strength (this basis is applied in cases of the expiration of the document, if the duration of the document is specified in the document itself or determined by law, as well as in other cases stipulated by the legislation of the Russian Federation, the legal acts of the city of Moscow).

8. The self-propelled machine indicated in the application is not registered in the established manner by the state-stance authorities.

Additional reasons for refusing to receive documents necessary to provide public services, when providing services in electronic form using the portal are:

1. Incorrect filling of mandatory fields in the form of an interactive application.

2. Documents in electronic form are signed using an electronic signature that does not belong to the applicant.

3. Availability in electronic copies of documents directed in electronic form using the portal unreadable documents.

Grounds for refusing services

The grounds for refusing the provision of public services are:

1. Failure to submit self-propelled machine on that.

2. Detection of signs of fake documents, a state registration sign, changes in the factory labeling of machines during non-compliance of the units of the units submitted documents or registration data, as well as confirmation of the authorized bodies of information on finding machines (license units) or submitted documents wanted.

3. Presentation of the self-propelled machine on that not authorized on the face.

4. Failure to comply with the requirements of the State Technical Support of the city of Moscow to the equipment of the place (platform) of the conduct of the self-propelled machine in accordance with Annex 4 to the Administrative Regulations for the provision of public services.

5. Admission to the Gostkhnadzor city of Moscow decisions of authorized state bodies on the suspension (prohibition) of the commission of legally significant actions with a self-propelled machine and its use.

Additional reasons for refusing to provide a state service in the event of a statement in electronic form using the portal are:

1. The expiration of the period during which the applicant should have selected the date and time of the self-propelled machine on the site of the State Technical Support of the city of Moscow.

2. Disagreement of the applicant to the proposed conditions for departure of the State Engineer-inspector of the State Technical Supplies of the city of Moscow for the self-propelled machine (machines) provided for by applications 4 and 5 to the administrative regulations for the provision of public services, as well as the date and time of behavior.

3. The presence of contradictory information in the interactive statement and documents obtained using interdepartmental information interaction.

(StateTechnadzor of the city of Moscow)

Similar articles: