Drain cork antifreeze Kalina. How do you change the cooling fluid in Lada Kalina? How to determine whether the thermostat works

To date maintenance car own hands - not a wonder. First of all, it is a significant savings of their own time, forces and cash. In order to qualitatively replace the coolant on the Lade of Grant and Valina, it is necessary to take advantage of a special step-by-step instruction with a clear sequence of actions.

Cooling fluid varieties for Lada Kalina

In Lada Kalina, the replacement of the coolant should occur on a regular basis every 50 thousand kilometers. It is worth remembering that when operating a car in heavy urban or extreme conditions, the coolant replacement should occur more often, because the engine works at elevated loads and the antifreeze produces its potential faster.

In order to choose a high-quality cooling fluid for the Lada Kalina, it is necessary to give preference to the original manufacturer, for example, the Cool Stream brand. Car owner It is worth remembering that before updating the refrigerant, the spent cooling fluid must be drained, and the system washed special composition or distilled water. This, first of all, is necessary in order to remove the suspension, the metal chips from the bottom of the system and the remains of the old liquid.

Why change coolant liquid?

It is worth remembering that the coolant performs a very important function - adjusts the temperature in the radiator system, cooling it. At the same time, if it is not possible to replace the replacement, then the following common situations come:

• Corrosion system.
• Wear pump.
• The failure of the internal combustion engine.
• Damage and wear of the system radiator.
• Overheating and temperature increase in the radiator system.
• Corrosion of the details of the radiator and the appearance of the sediment in the system.

The frequency of coolant replacement is indicated in technical manual User. If we consider temporary boundaries, they constitute about 2 years under normal operating conditions of the car. In the difficult conditions of the city, the car is quickly wearing, and the replacement is required more often.

Signs of the need to replace antifreeze:

• Changing the color of the refrigerant.
• The appearance of rust and foreign suspension.
• Increase the temperature indicator on a special car sensor.
• General decrease in car power.

When the above features, it is necessary to immediately replace antifreeze.

Preparation for replacement

Replacing the coolant LADA KALINA 8 valves should occur using the following tools:

• Rag and gloves to protect the skin of the hands.
• New cooling liquid of the selected category and brand.
• Set of universal screwdrivers.
• Ratchet.
• Head at 13 units.
• Special key for unscrewing the case.

When replacing antifreeze in Lada Kalina, it is necessary to clearly adhere to the main norms and safety Rules:

• Carry out a row of the car within 5-6 kilometers to warm up the antifreeze, thus improving its fluidity.
• Give the car to cool so as not to burn about hot parts.
• Works should be carried out away from children, animals and plants, as the refrigerant is poisonous.
• All operations should be carried out in the appropriate protection that prevents the solution from entering the skin.

In no case should not immediately begin the replacement of antifreeze, it may threaten the skin of the skin.

Step-by-step regime replacement

Replacing the cooling fluid of Lada Kalina, as well as Lada Grant 8 Valve occurs according to the next step by step instructions User:

• Put vehicle on a flat surface or overpass.
• Unscrew special drain plug.
• Merge old antifreeze from the system. This procedure usually takes about 20 minutes and requires a special tank for drain.
• After the residues of antifreeze flow, it is necessary to rinse the system and remove the old antifreeze.
• Unscrew the bolt on the hose clamp.
• Pour a new cooling fluid into the system.
• Turn on the ignition and trace the refrigerant level in expansion tank.
• Split a drain cork in order to avoid leaks from the system.

In order not to miss the regular change of antifreeze, it is necessary to constantly check its level in the cooling system, it is enough to open the hood and estimate the level and condition of the coolant in the expansion tank.

During the operation of the car Lada Kalina, it is necessary to replace the foaming fluid. Today I would like to talk about how to do it.

To replace Tosol on Kalina, we will need:

Key to "13"

Screwdriver

Coolant

Empty Capacity for the drain of old toosol

We will proceed to the very replacement of Tolza to Lada Kalina

To begin with, install the car on a flat horizontal platform. If there is no such platform, then it is necessary that the front part is above the back.

Disconnect the minus wire from the battery

Remove the engine's mudguard

Now you should unscrew the plug of the expansion tank.

Now you should install a predetermined container for the old cooling fluid for a drain plug. After that, you should unscrew the drain plug. Remember if the car is heated, then you need to be very neat, the cooling fluid is very hot. After Tolos fusion, its traces from the cylinder block should be wiped.

Now it is necessary to merge the old liquid from the radiator. To do this, we set the tank for the old coolant under the radiator, and unscrew the plug hole on the radiator and wait until the toosol is fully extended from the system.

After the cooling fluid of the glass, the drain plugs should be screwed into place.

Disconnect the throttle hose, and start pouring toosol into the expansion barrels, until it starts to pour out from the throttle hose, at this moment, install it in place. Pour the cooling fluid until the level of antifreeze in the expansion barrel before will be between the marks at least and the maximum.

Set in place minus battery

Now you should check everything, start the engine and give it to warm up to turn on the cooling fan. After that, the engine should be stopped, and if necessary, add the foaming fluid into the expansion tank.

In order to avoid overheating of the motor, the owner of the car Lada Kalina is recommended to constantly monitor the level of antifreeze in the cooling circuit. To do this, there are special labels on the body of the expansion tank. The level should not be lower than the minimum and above the maximum. If a gradual decrease in the amount of antifreeze occurs, then the likelihood of fluid leakage is high. In Lada Kalina, such foci can be part of connecting nozzles to the radiator, a tank or a thermostat, as well as pumping pumps. In this article, let's talk about how to drain antifreeze, as well as how the coolant is replaced in the car.

Antifreeze and its volume

To fill the cooling circuit in Lada Kalina, a new liquid will require a volume of approximately 8 liters. Initially, the manufacturer's plant applies a felix substance with red. In order to practice the liquid to replace the liquid, the acquisition of a 10-liter container with the specified antifreeze or alternative is two 5-liter canisters.

Selection options

When choosing, you should not neglect the color of the liquid. The color is designed to designate certain properties of antifreeze, so replace it only for an option with identical color.

• "AGA 003Z" (temperature minus 40 degrees), has red, it is estimated approximately 1 thousand rubles. For a 10-liter container.
• "Professional Premium" refers to the category "G-12", and the cost of a similar "tank" reaches 700 rubles.
• SINTEC LUX G-12 is also characterized by a red shade at a price of 1 thousand rubles. For a volume of 10 liters.
• "FELIX CARBOX-40", similar volume of canister with red liquid will cost the owner from 950 rubles.
• "Niagara", the substance "G12"; For the volume of 10 liters, it will be necessary to pay the amount of at least 800 rubles.
• "Polar circle", a substance with similar parameters; 10-liter capacity is at least 700 rubles.

Antifreeze from above designated manufacturers has proven itself well enough, so it can be purchased without the slightest hint of doubt.

What do you need when replacing?

• A suitable container in which about 8 liters will be collected.
• Face head size for "16".
• Caid-type key with dimension "13" to dismantle the starter in the variation of the motor 16 valves, does not concern the 8 valves motor.

Replacing antifreeze implies the presence of a cooled engine also before starting you need to know how to drain antifreeze. Before starting the procedure, it is recommended to reset the pressure level in the circuit, for which it will be necessary to open the lid present on the neck of the expansion tank. For ease of access to the drain hole, you will need to withdraw cartridge protection.

Replacing coolant

Note that the technology of action to replace refrigerant in versions Lada Kalina. With 8 valves, there are somewhat different from the sequence of work on variations of 16 valves engines. In the latter case, to ensure access to the plug plug plug, the block will need to dismantle the starter fastener. And before work we learn how to merge the antifreeze correctly.

Procedure of 8-valve facilities

1. We reset the pressure of the previously specified way.
2. We dismantle the protection of the crankcase.
3. Under the drain hole (located on the radiator with the right side) we substitute the prepared container.
4. You can adjust the pressure of the fluid drained by twisting or remove the plug on the tank. We carry out this manipulation, focusing on the situation.
5. Having unscrewed the radiator cork, waiting for a full waste of the liquid.
6. Now we move to the engine block.
7. The plum plug is located under the coil of the ignition node.
8. To unscrew the specified traffic jam, use the key of the 13th dimension.
9. We substitute the same container and collect the residue of the liquid.

Replacing antifreeze is completed.

Change on the 16-valve modification

As noted, to perform the procedure in full, disassemble the starting site. If you neglect this important manipulation, then through the open hole, the spilled liquid can penetrate inside the starting unit, causing it to break it.

1. Turn off the power of the lada kalina starter, disconnecting the block with cables from the retractor relay on the housing of the node.
2. On the plus output of the unit, we remove the leakage cap, then the key to "13" unscrew the locking nut, remove the terminal with the wire and assign to the side.
3. Now you can unscrew the 3 bolts with which the node is kept on the block. We take out the starter.
4. Next, we move to the disclosure of the plug and reset the refrigerant into the container.
5. After completing this stage of the process, screw the plug into the regular place. The moment should not exceed 30 nm.
6. Previously, we produce liquid drain from the radiator node.

Upon completion of the plugging, go to refueling the system designated liquid. We carry out this action through the neck existing on the expansion tank. After that set the starter, run power installation and pressing fluid pressure on the nozzles to start circulation in the circuit faster. In parallel control the level of tags on the tank. It should be located between the "min" and "Max" risks. Replacing antifreeze successfully completed.

Determination of the thermostat

After warming up the Lada Kalina motor, carefully touch the lower discharge hose of the radiator node. Its heating will indicate the presence of the refrigerant circulation factory for the so-called big circle. After the system's fan turns off, swing the heat from radiator cells, the mooring motor and notice the level in the previously specified tank.

Now the procedure for replacing fluid in the car Lada Kalina can be considered completely over.

If the fact of the lack of tightness of the lid on the labeled tank is detected, after the replacement of the coolant is completed, it should be replaced immediately.

Product Options:

• the cover with the code "2108 2108-1311065" in the "Auto-Cake" version; cost at least 150 rubles;
• the product with the article "2108 Luzar LL 0108" at a price of about 100 rubles;
• production cover "Chistopol" with the code "2108-1311065" in terms of cost from 70 rubles.

Replacing the coolant in the car Lada Kalina is completed, and now check the contour on the absence of leakage. If it is present, then replace the clamps that hold the butt sections of the nozzles.

Tosol replacement on Kalina occurs in several stages:

1. merge toosol.
2. pour new Tosol.
3. Exhaust air from the engine cooling system.

How to merge Tosol on Kalina

Set the tank under the drain hole (at the bottom of the right tank of the radiator) with a volume of at least 6l.

1. Drain Tosol into the container. When draining the liquid we turn the lid of the expansion tank.
2. To merge the cooling fluid from the engine cooling shirt we substitute the tank under the drain hole located on the front side of the cylinder block closer to the clutch.
3. Unscrew the plug hole plugging the cylinder block with the key "on 13".Merge toosol from the system.

Watch the plugs of drain holes of the radiator and the cylinder block.
Pour clean cooling fluid (5-6l) into the engine cooling system through the expansion tank.

Remove air traffic viburnum

On the engine running, all the hoses of the cooling system are vigorously alternately, it will help Tosol to fill the system and drive air out of it. As the coolant level drops in the expansion tank, bring it to the norm and wrap the tank cover.

When warming the engine, the reducing (lower) radiator hose must be cold for some time, and then quickly warm up, which will indicate the start of the circulation of fluid in a large circle. After waiting for the cooling system fan, stop the engine.

If the fluid level in the expansion tank is constantly decreasing, then the cooling system is most likely to flow. In this case, it is necessary to check the tightness of the cooling system and eliminate the malfunction (see "

How to change the coolant (antifreeze or toosol) on the Lade Kalina

In order to not overheat the engine, you need to look at the level of cooling water looking at that you are filled with Tosol or antifreeze. Look at the water level in the expansion tank, as well as check on the signs of the leafs and their connections, as well as the pump. The complete substitution of the filter according to the regulations of the plant was recommended once every 5 years or every 75 thousand km of run.

What antifreeze to choose and what volume is needed

For complete replacement of cooling water in Lada Car Valina / Kalina 2 generations need 7.8 liters Tosol or antifreeze, looking at what you do. Felix reddish antifreeze flooded from the plant.

For a complete substitution of coolant (cooling water), we need to be purchased or one 10 liter canister, or two jokes of 5 liters ..

Choose antifreeze for replacement

If a reddish antifreeze was filled from the plant, then we advise you to create a substitution for reddish.

• AGA 003Z (-40 *) reddish 10l cost from 1000 rubles
• Professional Premium G-12 Reddated 10 L Costs from 700 rubles
• Sintec LUX G-12 Reddish 10l Cost from 1000 rub
• FELIX CARBOX-40 (10 l) red price from 950 rubles
• Niagara G12 (10 l) red price from 800 rubles
• Polar circle G12 (10 l) red price from 700 rubles

What will be required to replace

• Capacity for the drain of an old antifreeze by 6-8 liters.
• Head at 16mm.
• 13mm cape key to remove the starter on 16 valve version of viburnum

The substitution is better to create on a cool engine. Before the substitution, pressing the pressure in the system by unscrewing the lid of the expansion barrel. In order to freely reach the drain plug, you need to remove the middle mud shield.

Cooling fluid replacement instructions

On the farewees with 8 and 16 valve motors of the substitution of the coolant is different. From the radiator, an old liquid can be merged without problems, but from the block to 16 valve Motor. harder. You have to unscrew the starter.

Replacing the coolant. Kalina

Time to change the cooling fluid and the question appeared that to pour Tosol or Antifreezeand how to do it ...

Read:

Features of the replacement of toosol by car Lada Kalina

Substitution antifreeze Produced in 5 years.

Replacing antifreeze on 8 valve Motor. Lada Kalina

So, we reset the pressure in the system by reloading the lid of the expansion barrel. Then remove the motor protection to get to the drain plug.

We take a capacity of 6-8 liters. And we substitute for a drain hole located on the right to gear on the radiator. So that the pressure was weaker, we will spin the plug of the expansion bar.

We turn out a drain plug on the radiator and give one hundred percent stroke water from the radiator.

We drain the liquid from the cylinder block on the 8 valve engine

On 8. valve Motor. With a box with a traction drive to merge an old coolant is pretty easy. A drain plug is located under the spark plug.

Using the head to 13, we unscrew the drain plug, we substitute the container and drain the liquid.

We drain the liquid from the cylinder block at 16 valve Motor.

To get to the drain traffic jam you will need to remove the starter. If the starter does not remove, and unscrew the plug and merge the liquid, it is poured right on it, which can lead to failure.

Disconnect the block of wires from the traction relay at the starter. Remove the protective cap from the plus wire, and with the help of a key on 13 mm turn the nut and remove the wire.

Read:

Now it remains only to unscrew the drain plug and drain the coolant from the cylinder block.

After the liquid from the block of the fusion, wrap the drain plug with an effort of 25-30 N · m. We also wrap the cork of the radiator and pour the coolant through the expansion bar before its filling.

We launch moving and begin to put pressure on all the nozzles, stimulating the best passage of antifreeze or antiflower and filling the entire system. Do not marry watching the level of fluid in the barrel, which must be between Min and Max.

How to determine whether the thermostat works

When driving a motor, you touch the lower vending pipe. It will be cool, and later should rapidly warm up, which indicates that the coolant began circulation by a large circle. Follow the fan as soon as it turns on and selects the temperature, the wasting engine and check the level of the coolant in the expansion barrel.

On this replacement of antifreeze is completed.