Dashboard UAZ Patriot. Removal and installation of UAZ Patriot instrument panel

The dashboard is the subject of the interior that heats not only the soul of the SUV owner, but also gives pleasure. The more modern dashboard, the more nice to the driver to drive a car - and this is a fact! If the predecessor of the old UAZ had a primitive dashboard in the edge, then the modern miracle creation of the Ulyanovsk car industry can boast the interior of the interior of the car. What is the dashboard on the SUV, the main devices and additions, as well as the tuning of the device - all this will be considered in this material.

The dashboard is nothing but a shield on which various automotive components. The instrument shield is made mainly of black plastic. The housing of the panel is removable, which is a plus if necessary repair work. The simplicity of dismantling the panel makes it possible to conduct it tuning or upgrading other components.

The instrument panel on the UAZ Patriot SUV has a modern design that can be freely compared with foreign crossovers. Consider what is included in the installation of the instrument panel:

• Control unit lighting devices.
• Switch of turn signals and headlights.
• Control of glass washer and janitor.
• Regulation of the frequency of glass cleaners function.
• Speed \u200b\u200bmeasurement devices, rotational speed crankshaft, quantities of fuel in a tank, time, etc.
• Sound signal control.
• The heating and air conditioning system control unit.
• Caller switch.
• Ignition lock with built-in anti-theft system.

Backlight panel

Combination of devices

The combination of devices on the UAZ Patriot SUV includes the following elements, pointers and signaling elements. Below is a diagram that displays the location of the element.

Scheme reflecting the combination of devices of the UAZ SUV patriot

1. indicator of temperature in the engine;
2. pointer functioning of incandescent candles;
3. light alarm Oil pointer in the system;
4. light alarm indicating the need to check the engine;
5. warning overheating of the engine cooler;
6. tachometer;
7. lamp of the left rotation pointer and light alarm;
8. lamp signaling about incomplete closure doors;
9. light alarm, indicating a weak battery charge;
10. fault brake system;
11. lamp indicating the inclusion of anti-lock brake system;
12. pointer included parking brake;
13. lamp indicating the inclusion of anterior bridge;
14. right rotation pointer lamp and light alarm;
15. speedometer or motor speed pointer;
16. lamp Functioning Functioning Fog Rear;
17. index of inclusion of outdoor lighting;
18. lama in front of the fog front
19. reduced fuel reserve;
20. function index far Light;
21. indicator of the amount of fuel;
22. relief of the run;
23. pointer of the mileage of the car UAZ patriot;
24. time and voltage pointer system;
25. indicator function switch.

The combination of devices will help beginners to figure out for those or other light indicators. So, knowing what is a combination of devices, consider why the backlight will not work on the UAZ Patriot SUV.

Why the backlight does not work in

If the devices do not work on the SUV, then before being discouraged, you should look for the reason from the sources yourself. The panel has a regulator, which is a row, using it, controls the panel illumination. To do this, it follows the retail to translate to the extreme top position and if the lights do not light up, then you will need to look for the causes a little deeper.

When the devices are not working, then you should check the safety of the fuse under the number F1. If it is working, then you need to check the rheostat. If the rosostat has oxidized contacts, the current through it does not pass and thereby lack the backlight. You can snatch the contacts directly, and if the light bulbs light up, then the reason is the fault of the rheostat. To correct the breakdown should be replaced with a retail. Another malfunction can be the burnout of the lighting light bulbs. If this happened, there is a need to disassemble the panel and change the bulbs to new ones.

Lighting panel and tuning

If the UAZ SUV patriot model 3163 has in the configuration of the dashboard. Conventional incandescent light bulbs, then on cars from 2010 release there is already a new dashboard with LED lighting. Diode light bulbs are a new generation of lighting.

For the owners of the first models of SUV UAZ Patriot there is a pleasant news. If you are tired of the weak light panel lighting, or it has an unpleasant color of the glow, then this trouble can easily be corrected by upgrading light bulbs, or in a simple thing - make tuning device. So, the lighting tuning implies the replacement of incandescent bulbs to LEDs. How is the panel tuning? To do this, remove the dashboard, disassemble it and replace the usual light bulbs on the LED. There is necessarily the pinout plugs before their separation so that with ease to return everything to its places upon completion of the work.

Tuning and the process of removing the dashboard, consider in the following materials, and at this stage of the torpedo and it appearance At SUV, UAZ Patriot is fully considered.

You can check your KBM, and if you need to reduce it!

The following control and measuring instruments and controls are located on the instrument panels (Fig. 1.6).

1 - control unit outdoor lighting and lighting.

The block includes the following controls.

The dashboard is an integral attribute of any vehiclewhere the main sensors and indicators are concentrated, providing more comfortable control of the car. Therefore, every car owner should know what they mean certain icons on the tidy, especially for the owners of domestic SUVs. Which indicators are installed in the UAZ Patriot instrument panel and which malfunctions can occur in the device work - you can read about it below.

[Hide]

Description and location of indicators and appliances on the panel

The combination of UAZ UAZ devices, UAZ 469 and other models of the domestic producer consists of a variety of controllers and indicators.

Consider the description of the tidy elements on the example of the Patriot model:

1. Car Motor Control Sensor. It is impossible to allow the arrow to move into a critical zone.
2. Performance indicator.
3. Pointer icon motor fluid In the engine. If he starts to burn continuously, this indicates the need to add consumables.
4. Universal error icon. When it appears, the car owner should diagnose the performance of the power unit.
5. Symbol overheating engine cooler.
6. Tachometer determining the number of crankshaft revolutions during the motor operation.
7. This indicator is turned on when the left turn signal is activated, as well as light alarm.
8. A symbol of a loose closure of one of the doors of the car.
9. This indicator indicates a reduced battery charge. If it burns continuously, the car owner should check the battery.
10. The symbol of faults in the brake system. Perhaps the pads were worn or simply failed the sensor, it is also possible to open the wiring of its connection.
11. This icon appears in the event that the anti-lock system is activated. If it always burns, the system needs to be checked for faults.
12. Manual brake power symbol.
13. Flow bridge activation indicator.
14. Light indicator on the right turn signal, as well as light signal.
15. Speedometer designed to determine the velocity velocity.
16. Light indicator of the rear fog headlights.
17. The icon is included in the activation of external lighting.
18. The symbol of activation of the front fog lamps.
19. Low fuel indicator in the tank. It appears if the system uses the reserve reserve of fuel to move. When the indicator appears, the car should be fixed as quickly as possible.
20. Far Light Light Lights Icon.
21. The fuel level sensor, the driver is focused on it when you need to fill the car.
22. Mileage reset button.
23. Total mileage meter machine.
24. Sensor for determining the voltage in the onboard network of the car, as well as a time pointer.
25. Switch.

Photo gallery "Connection schemes of different models of PP"

Possible malfunctions

In general, the UAZ dashboard Hunter is a rather reliable device that can work for years. But sometimes it happens that the UAZ tidy refuse to function.

Consider faults that can occur in the system:

1. UAZ devices do not work. The lighting does not turn on, indicators do not burn, during the movement of the arrow of the sensors do not rise, while it is possible that the engine will not be possible and start. There may be two options here - either "covered" the control panel itself, that is, its chip, or there are problems in the operation of the control unit. And in that, and in another case, you will have to deal with electronics, so the task of repair is still better to entrust specialists.
2. Only the backlight does not work. The UAZ Patriot instrument panel is equipped with a special regulator, which is a retail that allows the driver to control the backlight of the shield. Try to translate this rheostat to the extreme top position, it will provide the maximum brightness of the backlight. Also, the backlight could have lost due to the failure of the F1 fuse, but if this element is correct, then the diagnostics of the controller itself should be diagnosed. We could oxidize the contacts that it will interfere with the current to pass through the retaint.
3. One or more light bulbs does not work or indicators. In this case, the reason may be in the burnout of the sources of the lighting of the control panel. In this case, the car owner will have to fully disassemble the shield and change the bulbs.
4. Sensors are not working - speedometer, tachometer, fuel level, etc. Most likely, the problem lies in electronics, especially if all controllers immediately failed. If one of them broke, then it is worth looking for a problem on the aggregate itself. For example, if the fuel sensor does not work, then it is necessary to search the controller that it must be installed in the tank, it may not work that it is (by video by CEVRON channel).

Ideas for tuning

What ideas tuning can be implemented in dashboards on UAZ:

1. Organization diode backlight, the easiest option. You only need to change the installed bulbs in the tidy to LED.
2. Using a tunned scale for tidy sensors. Such scales are applied directly from top to the set-down scale with values. They are usually used because they are more modern in appearance. Installation of the scales on the speedometer, tachometer and other sensors should be done with the dismantling of the arrows from the instruments, you can buy such scales both in the store and download from the Internet.
3. Testing tidy, in particular, its outer part. This method Tuning is more relevant if there are damage on the shield.
4. Adding chrome rings on the scale.
5. Installation of sports tidy. This option is the most difficult, since to install a tunned sports tidy, you will need to remake regular connectors for connecting. It is also possible, it will be necessary to interfere with the operation of the control unit to synchronize with it a new tidy.

And for some reason even the steering wheel is installed old, hard

Although on the passenger line (,) the steering wheel is installed "soft", double-spoke. True, the line is still present GUR and ABS! So, apparently, such a complete set 🙂

Middle / Far Light switch remained there - on the floor:

And the headlight switch is all the same. (Gentle toggle switch, apparently, was decided to withstand in a single style)

I did not please the quality and aesthetics of welded seams. 🙁 as well as organitis as a finishing material. ( Organit - The material obtained by the hot pressing of the mass or drying of a fibrous carpet (soft fiberboard) consisting of cellulose fibers, water ...)

In general, both looked designer and remained. After purchase, it is necessary to immediately roll the sleeves and improve the improving: to warm, seal, reconnect, install music, communication, improve ventilation, etc.

It is difficult to look indifferent to such a car. When meeting with it, bikers welcomely sign up, the police begin to smile wide, and the jepreings refer to the languages.

For Ulyanovsk SUVs, the fame of not too reliable cars has long been entrenched, but it is somewhat compensated for cheap spare parts. Design, allegedly copied at one time with Land Rover. Series III, morally outdated, but is simple and maintainable. And most importantly - in skillful hands it is able to argue on the off-road with most foreign classmates.

And this is despite the fact that they shook it in absolutely "oak" and not too much rubber, and the drawing of the protector leaves her better. Meanwhile, the passability of the machine half depends on the wheels. This, as the Ostap Bender said, medical fact. It turns out if the car goes well on mud on the midnight rubber, then it should create miracles in general. So there is a reason to put a domestic passing on "Right" imported wheels. True, so that they fit into the arches, you need to work hard and raise the body over the frame - on special terminology, produce Body Lift, "Turn". An option that applied one of our kind familiar, is interesting for its extensive cheaply.

To put on your UAZ 31512-32 (modification with military bridges) of the wheel with a diameter of 35 inches, its owner had to be installed between the frame and the soup of the spacer.

Their function has successfully completed hockey washers, two pieces for each of 12 bolts fastening. Before drilling holes, the washers did not even have to post - they have a slightly convex surface, and on the way from the factory to the store, a small fence is formed in the middle. The process of complementing the full-time pillows "self-" spacer passed very simple.

First were radiator fastening thrust. Then it came to the turn of nuts and bolts, which the body was attached to the frame. And then with the help of two hydraulic jacks, the body alternately raised the back, in front and from the sides, inserting the washers. The regular fastening bolts had to be replaced with a longer.

Another small refinement - installation of longer springs from Gazelle. The only difficulty arising is that the standard Gazelievsky fastening bolt earrings is less than a diameter than the holes in rubber bushings UAZ. Therefore, the bolts had to wear pieces of a tap pipe. After the body was screwed again to the frame, and new earrings took their place, it remains only to adjust the angle of inclination of the radiator. Now the 35th wheels just asked themselves in the expanded arches.

Note that all the work was performed by one person within 2 days.

And in the end ...

On the new rubber The car began to look very impressive. The clearance, which UAZ with military bridges is centimeters 30, has increased by more centimeters at 8-9.

After the car started, it became clear - the gas thrust is too "zaddy", and the engine is growing without outside interference increased turns. Nevertheless, it did not have to drill an additional hole, there was already a hole in the right place!

With a test maneuvering, it turned out that the rear speed was not turned on - the body rose, and the groove of the gear lever shifted. The problem was solved by a slightly working with a file. And it's all, there are no side phenomenon. But as one of the advantages of the "elevator", it is possible to bring the fact that the gas tanks rose to the level of the frame and became more protected.

As the last strokes, the owner of the UAZ as follows him. For example, attached to the hood of the machine shovel. For this purpose, fasteners were perfectly suitable for automata, borrowed from the Military Urals. In Spartan, the decorated dashboard managed to revive a sign with a red light bulb and the signature "no oil side". For those interested, we will explain that such signs can be found on the border boat. Further around the good work.

High-profile off-root tires on chrome disks were transformed not only the appearance of the machine. UAZ even on asphalt began to behave differently, silently swallowing the Colds. Still, because Rubber BF Goodrich Mud-Terrain is famous for soft. And on off-road, if it is presented, it is molded and gives a wide contact spot.

What at prices?

So, it was about the unprecedented cheapness of the project. We will produce simple calculations:
Hockey washers, 24 pieces of 6.50 rubles. Only 156 rubles.
Bolts, 12 pieces of 19 rubles. Only 228 rubles.
Earrings from Gazelle, 4 pieces of 35 rubles. Just 140 rubles.
Total 524 rubles is obtained (approximately 25-30 dollars).
The UAZ himself of the 92nd year of release, even if it is with a slight mileage, it is hardly worth more than 1000 dollars.

Tires BF Goodrich Mud-Terrain 35x12.5 R15 You can, with a big desire to find $ 220. Four pieces and spare parts will thus cost $ 1100. Add to this 5 discs 15x7 with a total cost of $ 750, and it turns out that it is necessary to post $ 1,850 per wheels.

If you fold together "Hockey-Gazelle" Kit for Body Lift, a used car and new wheels, it turns out about $ 2880. If you are morally ready for the breakdowns of your iron beloved, then the picture is fully acceptable.
PAY

It is clear that it is possible to lift the body over the frame using the washers not only on the UAZ. And in general, the idea itself is not Nova. There are imported branded kits for Body Lift, standing by about dollars 200. For what are the imperialists fight such money? The fact is that the factory kits are made of special plastic, resistant to vibration, shocks, heating. Such spacers are tested and mandatory certification. But about the washers can not say anything concrete. As they behave when they hit, how many sharp braking will withstand and in general, how long will serve, unknown. The author is known for cars, for several years exploited with raised "low blood" by the body. But several cases are not statistics. So inactive with free gingerbread.

On this page shows the photo of the Salon of the car UAZ Buanka:

The location of the controls

1 - steering wheel. The steering wheel of the UAZ-31512 car, UAZ-3153 and the OAZ-3741 family has a central button of the audio signal. The steering wheel of the UAZ-31514 and UAZ-31519 car is equipped with an energy-intensive overlay and has two buttons of the beep, located in the spokes of the wheel.
2 - rearview mirror (internal). Is regulated by turning around the hinge head.
3 - instrument panel.
4 - Sun visors.
5 - pipe blowing nozzles.
6 - Passenger handrail.
7 - Lantern (ceiling) lighting.
8 - Mass Switch rechargeable battery. Turning on-Turning the "Mass" is made by turning the handle by 90 °.
9 - lever turn on the front leading bridge. It has two positions: the front - bridge is on, the rear - bridge is turned off. Before turning on the front bridge, turn on the front wheels. Turning on the bridge when moving a car.
10 - heater.
11 - control lever dispensing box. It has three positions: the front - the direct transmission is enabled, the average is neutral, the rear - the downward transmission is enabled. Before turning on the downgrade, turn on the front axle. Lowering Include with the clutch shutdown and only with a complete stop of the car.
12 - gear shift lever. Switching diagram is shown on the handle. Transfer Switch to smooth pressing on the lever without jerks. If you cannot enable the required transmission before touching the location, then the clutch pedal is slightly released, and then turn off the clutch again and turn on the transmission. When switching from a higher transmission to the lowest, it is recommended to use double clutch shutdown with short-term press on the control pedal throttle valve. Transmission rear stroke Enable only after the complete stop of the car. When the reverse is turned on, the reverse light lamp.
13 - lever of the parking brake system. To turn on the lever, move back, to turn off, press the button in the lever end and move the lever forward until you stop. When you turn on the parking brake mechanism On the instrument panel, the red control lamp lights up.
14- Handle of the drive cover of the ventilation and heating of the body.
15 - the handle of the fuel tank switch. The handle is turned forward - the crane is closed, the left tank is turned down to the left, the left tank is turned the right tank. On cars with one fuel tank The tap is not installed.
16 - Pedal control of the throttle of the carburetor.
17 - pedal working brake system. Cheat the car smoothly, increasing gradually pressing the pedal. When braking, do not bring the wheels to slip, since in this case the braking effect is significantly reduced (compared to the braking when rolling) and the wear of tires increases. In addition, severe and sharp braking on a slippery road can cause a car drift.
18 - clutch pedal. When switching gear and touching the clutch pedal should be pressed quickly to failure, and release smoothly. Slow or incomplete pressing on the pedal leads to a clutch slip, which makes it difficult to switch gear and causes an increased wear of the slave clutch disk. With a sharp release of the pedal (especially when touching from the place), the load on the transmission increases, which can lead to deformation of the slave clutch disk and other transmission parts. When driving a car, do not hold the foot on the clutch pedals, as this leads to a partial clutch shutting down and to the pro-towing disk.
19 - headlight light switch. By pressing the button, when the headlights are turned on, the low-headed headlights turn on. On vehicles with multifunctional subit-left switches is not installed.
20 - outlet of a portable lamp.
21 - Radiator blind control knob. With certain modes of operation and climatic conditions, to maintain the temperature of the coolant of the engine in the range of 70-80 ° C, it is necessary to adjust the amount of air cooling radiator using the blinds. When pulling the shutter knob, the blinds are closed.
22 - rearview mirror (outdoor).
23 - Handle of the rotation pointer switch. The handle automatically returns to the neutral position when turning the steering
in the opposite direction (when the car is released). Multifunctional steering switches are installed onto the part of the car.
24-man controlling the throttle damper of the carburetor. The elongated handle is fixed with a rotation of 90 ° to any side.
25-man control air damper carburetor. The elongated handle is fixed with a rotation of 90 ° to any side.

Console:

1 - alarm switch. When you press the switch button simultaneously run in the flashing lamp mode of all pointers and rotation repeatters, the turning on the rotation indicators (pos. 6) and the signaling lamp inside the switch button.
2 - speedometer. Shows the speed of the vehicle in km / h, and the meter installed in it is the total mileage of the car in km.
3 - fuel level index in the tank. Each tank has its own pointer sensor (except for additional tanks).
4 - Signal Lamp of the Emergency Status of the Brake System (Red). Lights up with a violation of the tightness of one of the contours hydraulic drive To brake mechanisms.
5 - signal lamp on the parking brake mechanism (red).
6 - Turning torque indicator (green) signal lamp. Works in flashing mode when switching on the rotation pointer switch or alarm switch.
7-Signal lamp of emergency coolant coolant in the radiator.
8 - Far Light Light Light Headlight (Blue).
9 is the coolant temperature pointer in the engine cylinder block.
10-Signal oil emergency pressure lamp. Lights up when the oil pressure drops in the engine lubricant system to 118 kPa (1.2 kgf / cm2)
11 - Oil pressure pointer in the engine lubricant system. 12 - voltmeter. Shows the voltage in the onboard network of the car.
13 - Cigarette lighter. To heat the cigarette lighter helix, click on the insert handle, climb it until fixing in the case and release the handle. When the required heating temperature is reached, the insert is automatically returned to initial position Forced holding inserts in a recessed position is not allowed.
14 - lighting lamp (installed on UAZ-31512, on the rest of the models there is a ceiling lighting ceiling)
15 - Lighting Light Switch (Plafough). On some models, the switch is located next to the flappon.
16 - the throttle control knob of the carburetor.
17 - Switch of fuel level sensors in tanks.
18 - Rear anti-foggy lamp switch with built-in power lighting lamp
19 - Fistan-Nõfar switch.
20 - The ignition switch and starter combined (see Fig. 1.22 and 1 23). The key from the IAZ-31514 car ignition switch, UAZ-31519, UAZ-3153 is removed only in position III, while the mechanism of the locking device, blocking the steering shaft, is triggered. To lock the steering in the parking lot, set the key to position III, remove it and turn it with the steering wheel to any side before clicking, meaning that the tongue of the locking device coincided with the groove of the steering wheel shaft lock. When unscrupping the steering insert the key into the ignition switch and, running the left steering wheel, turn the key clockwise to position 0. In order to eliminate the erroneous inclusion of the starter when the engine is running (II key position), blocking the engine switch mechanism is used in the ignition switch design. , giving the ability to restart the engine only after returning the key to position 0.

Naturally, any car owner understands that very far from foreign analogues in terms of comfort in the cabin. But we will not forget, once again, about a significant difference in price and can be content with what is. In addition, the initial purpose of the loaf was far from transporting passengers, but rather, just the opposite. However, even on the domestic minibus can be made in the cabin, if you make some effort and money.

Buankas were created with such a calculation to meet the high status of specialized cars for the Ministry of Emergency Situations, Medical Services, MVS, the Troops of the USSR and Russia. But this does not mean, as many were convinced that the car is impeccable. Therefore, it will have to replace and improve many elements and details.

In the cabin it is best to change the rigid seats on soft modern. Old "SDUCHES" can outstand the entire living spirit from the passengers, especially in heavy off-road conditions. In those times, when the machines were used, in the main security forces and doctors, no one attached values. Now, when the UAZ "Donkey" in a citizen, attention began to pay attention to this nuance. Some craftsmen manage to put on domestic minibuses with electric drive and heating.

The next stage of the Lokanka salon is noise insulation of the cabin and fasteners of all the elements of the dashboard. And when leaving the factory gate, the loaf did not particularly differ in the quality of the finishes, but after a certain period of operation - and suppressed. The rattling and "scattering" became a significant disadvantage of the car. Among the car enthusiasts, the trim of the skin of the skin was popular, the wooden inserts or details "under the tree" are very often mounted in the dashboard. Additional accessories, such as ashtrays, shelves, gloves, often add to the salon.

The steering wheel is also worth paying enough attention. It is best to replace the full-time steering wheel on a modern imported version with a soft upholstery of matter or skin. Such a "Baranka" will not give the hand to the hand to freeze in the cold season, it is convenient and ergonomic. However, do not forget that the new steering wheel must be consolidated in rete, as follows, so that it does not fail at the most unexpected moment.

Summing up, it can be noted that if in the UAZ to invest and certain funds - you can get enough hardy, passable, comfortable SUV.. Let it be not a sufficient level to compete with foreign cars, but he will delight the domestic motorist who is accustomed to the "folk".

Modern dashboard, it is often not only a car management body, but also one of the interior details. It should bear not only its direct function - to display the status of the car systems, current engine operation parameters and other units. But also be an intuitive and pleasant eye. The patriot panel fully complies with all these requirements, especially if you compare it with the predecessor. Nevertheless, some car owners are trying not only to eliminate the faults from time to time, but also to give her individuality.

The tidy is designed in such a way that the driver has access to all authorities of the car.

Since 2017, she has undergone serious changes after restyling, the appearance became more modern, while the functionality remained the same. The main components of the instrument panel:

• Light control unit;
• Lever pointer motors;
• Lever operation of wipers and washer;
• Dashboard;
• Sound signal;
• Air conditioning system;
• Emergency Signal;
• Egnition lock;
• Clutch / brake / accelerator pedals;
• Transmission control;
• Multimedia.

Combination of devices

This unit is located above the steering wheel and allows you to track the condition of the engine, lighting, fuel level, etc.

1. Current engine temperature;
2. State of incandescent candles (for diesel);
3. Oil pressure sensor;
4. Engine errors (Checkengine);
5. Temperature / overheating sensor;
6. Tachometer;
7. Left rotation pointer / emergency room;
8. Door position sensor;
9. ACB / generator malfunction;
10. Brake system malfunction;
11. Indicator work ABS;
12. Parking brake position indicator;
13. Front bridge connection indicator;
14. Right-rotation / emergency pointer;
15. Speedometer;
16. Rear fog lamps;
17. Middle Light;
18. Front fog lamps;
19. Low fuel level;
20. Dumping daily mileage;
21. Time / voltage indicator;
22. Switch the display parameters.

The combination of UAZ instruments Patriot is pretty simple, the image of the icons complies with international standards, so the car control will not work for those who have at least minimal experience.

Useful video

Fault.

Most frequent problems With UAZ Patriot Devices Patriot Patriot is the burnout of the backlight lamps, violation contact groups or loop loop. As a result, the arrows may not move on the instrument panel, the indication of the inclusion of certain auto modules is not displayed.

In the absence of backlighting one or two blocks, the reason lies in the output of the incandescent lamp, which is responsible for the shield sector. In this case, it is necessary to disassemble the panel and make sure the integrity of the lighting devices. When replacing the components, it is important to remember that the system is equipped with a retail that adjusts the brightness of the lamps. When installed lED lamps Instead of standard incandescent, problems are possible in work or failure.