» »

Where is the fuse of janitors VAZ 2109. Plotting of assembly blocks of cars VAZ

09.11.2019

(hereinafter - BP) is necessary in order to combine all wires electric wiring, as well as prevent the failure of electrical equipment. In machines russian production Owners are often faced with the problem of non-working devices. Therefore, to know the location and purpose of the block elements should know each owner of the VAZ 2109.

[Hide]

Location and Electroshem

On the models of the old type (released until 1998), the mounting block of the relay and fuses has a marking of 17.3722. This device consists of a plastic case, which, in turn, has a lower part and a cover, as well as engineering board. It is to this board that the wires are soldered, and fuses and relays are installed.

As for newer models of the car, that is, released after 1998, then the BP is marked with numbers 2114-3722010-60. They are installed fuses (hereinafter referred to as PP) and these blocks are distinguished between electrical components and some nuances in the assignment of elements. It is worth noting that regardless of whether the injector you have a car or carburetor, the device and power supply of the BP will depend on the year of release, and not on the type of fuel supply.

We inform about it to dispel the myth that goes among Russian motorists. Drivers seriously believe that the diagram and device of the block depends on the fuel supply system, but we assure you that it is not.

As for the location, the fuse box is installed in the VAZ 2109 motor compartment On the contrary driver's seat, under the windshoe glass.

The main difference between these two types of BP is:

  • miscellaneous designation of the details of the device;
  • different quantities of fuses;
  • in addition, the manufacturer decided that when developing a new BP, it is necessary to remove the fan engine relay of the cooling system, as well as the device time relay.

Marking 17.3722

Alternately consider the electric power supply of the old sample, as well as the purpose of the fuses. As we said at the beginning of articles, BP with such a scheme can meet in VAZ 2109, both equipped with injector and carburetor engine.

If you are the owner and you have failed, for example, a fuse on a stove or fuse of a fuel pump, then you will be easier to know the purpose of the block details.

Appointments of components of an old type

In addition, you will be useful for information on the assignment of the relay. It is presented below.

roomPurpose
1 Responsible for the functioning of the elements of theft of the front headlights.
2 This relay determines the operability of the engine washing the rear window.
3 This component protects against the failure of the turning light lamps, as well as light alarm.
4 Protects from breakdown Motor windshield janitors.
5 With these jumpers, you can determine whether the lamp works or not.
6 This component protects the rear window heating mechanism from overvoltage.
8 Lamps headlights far Light.
9 Lamps headlights of near light.
11 Without this device, the engine cooling fan fan will be impossible. When the device fails, there is a probability of overheating of the motor.
12 Responsible for the work of Klason.

Marking 2114-3722010-60

Now consider the power supply and purpose of the details of the block of the new sample. As mentioned above, this scheme will be relevant for both injection and carburetor engine.


Electroscheme of a new type of BP on VAZ 2109 since 1998.

Below is a table with an explanation of each part of the device.

Description of the appointment of components of a new type of BP

We will also consider the purpose of the relay.

roomWhat is responsible for
K1.Without this component, the operation of the rear window washer engine is not possible.
K2.Responsible for the functioning of the bulbs of rotary signals, as well as light signaling.
K3.Responsible for the work of the windshield cleaner engine.
K4.The purpose of the relay is to protect the lamps of the stop signals, as well as the dimensions of the vehicle.
K5.This component ensures the performance of the lamps.
K6.This item provides the operation of the device.
K7.This relay protects against the failure of the motor power windows. Of course, this is relevant if the windows are installed in your car.
K8.Claxon.
K9.Protects against overvoltage fan cooling system.
K11.Provides the performance of the rear window heating device.
K12Middle Lamps.

The process of removal and replacement

In practice, the owners of the VAZ 2109 are often faced with a problem when it fails, lamps on the instrument panel, stove or fuel pumps do not work. If the PP is to blame in the non-working state of electrical equipment, then you should replace it. In principle, the shift process is no different. The difference lies only in the BP scheme and a different case of the PP themselves.

For carburetor and injection engines

  1. First of all, you need to open the hood and turn off the minus terminal from the battery. Remember that all repair workRelated to BP must be performed when the battery is turned off.
  2. Under the windshield in the area of \u200b\u200bthe driver's seat, find the BP. It is protected by a plastic lid. Press the locks on its sides to dismantle the lid.
  3. Remove the lid and from the reverse side you can see the electrical system where the location and purpose of each component is marked. If you need to replace the item responsible for the work of the stove, cigarette lighter, fuel pump or other equipment, then find it in the diagram or use our manual. After that, remove PP by hand or with special forceps. If you change the relay, then dismantle it, shaking up and down.
  4. Replace the burnt item to a new corresponding nominal value. It is possible to determine the turbulent PP by the filament of the filament. All installation are made in reverse order. Connect the terminal minus battery.
On the left side of the movement of the car under the windshield, you will find a black block in which all PP and relays are installed. Remove the lid by lifting the clamps on the side.

Most electrical chains are protected fuses. Electric motors of motor deuctor (windshield cleaners, rear window (VAZ-2108, -2109), headlights - if installed) are protected by automatic bimetallic fuses of reusable. The injection circuit of the injection system (engine 2111) is protected by melting insert from the wire with a residential reduced section (1 mm2). Not protected chain charge rechargeable batteryIgnition ( carburetor engines), engine start, chain "Generator - ignition switch - mounting block". Powerful consumers (starter, headlamps, cooling system fan motor, electrical displacement, etc.) are connected through the relay.

Where is the VAZ fuse block 2108-09-099 (carburetor, injector). The relay and fuse block is located under the hood, in the compartment in front of the windshield on the left side.

Installation block of fuses 2114-3722010-18

K1-relay inclusion of headlight cleaners; K2-relay-trimmer of rotation pointers and alarm; K3-relay windshield wiper; K4-relay controlling the lamps; K5-switch turning on windows; K6 - switching on the audio signals; K7-relay inclusion of electrical heating rear window; K8-relay inclusion of far beam headlights; K9-relay inclusion of low headlights; F1-F16 - fuses

Mounting blockfuses 2114-3722010-60

K1 - RELATING RELIABLE PARTHER PLAYMENTS, K2 - RELATER RELATERING PLANS OF TURNING AND AUMENTIVE Alarm, K3 - Relay of the Windshield Purifier, K4 - Relay Control Light Light Stop Signal and overall lights, K5 - Powerboard switching relay, K6 - Sound signal switching relay, K7 - rear window heating relay, K8 - Far Light Relay Light Headlights, K9 - Relay Middle Light Headlights, F1 - F16 - Fleece Fuses, F1 - F20 - Spare circuit breakers

Mounting block fuses 17.3722

1 - Relay of inclusion of headlight cleaners (K6); 2 - rear window washer time relay (K1); 3 - relay-breaker of the rotation and alarm indicators (K2); 4 - wiper relay (KZ); 5 - contact jumpers on the site of the maintenance relay of the lamps; 6 - rear window heating relay (K10); 7 - Spare fuse; 8 - Relay of inclusion of headlights (K5); 9 - Relay of inclusion of headlights (K11); 10 - fuse; 11 - switching on the engine cooling fan fan fan (K9); 12 - Audio Turning Relay (K8)

Decryption of mounting block fuses For VAZ 2109, 2108, 21099

N * fuse "

Decoding

1 (8 A)

F9 (7.5 A)

Right fog light

2 (8 A)

F8 (7.5 A)

Left fog light

3 (8 a)

F1 (10 A)

Headlight cleaners (at the time of inclusion).

Relays include headlight cleaners (contacts). Pharmacy Omock Pharmacy Valve

4 (16 A)

F7 (30 A)

Headlight cleaners (operating mode).

Relay of inclusion of headlight cleaners (winding).

Heater Fan Electric Motor - Stove Fuse

Glass washer electric motor.

Motor rear window cleaner.

Rear layer time relay.

Valves for switching on the washing of wind and rear windows.

Relay (winding) switching on the electric fan engine cooling system.

Relay (winding) turn on the heating of the rear window.

Rear window heating control lamp.

Badge Lighting Lamp

5 (8 A)

F16 (15 A)

Pointers of rotation and relay-breaker of the rotation and alarm indicators (in rotation indication mode). Turn indicator test lamp.

Rear lights (light bulbs rear stroke).

Motor and windshield cleaning cleaner switching relay. The generator excitation winding (when the engine starts). Level control lamp brake fluid.

Oil pressure test lamp.

Control lamp of the carburetor air damper. Control lamp parking brake.

Lamp Light Tablo "Stop".

Coolant temperature pointer.

Fuel level index with a reserve control lamp. Voltmeter

6 (8 A)

F3 (10 A)

Rear lights (stop light lamps). Salon lighting plander

6 (8 A)

F6 (30 A)

Electric windows front doors. Switching on power windows

7 (8 A)

F10 (7.5 A)

Loan sign lighting lights. Podcast lamp.

Devices lighting lamps.

Control lamp outdoor lighting. The backlight board of the heater levers. Cigarette lighter lighting lamp

8 (16 A)

F5 (20 A)

Electric motor fan engine cooling system, and its switching relay (contacts).

A beep and relay of its inclusion

9 (8 a)

F10 (7.5 A)

Left headlamp (overall light).

Left rear lamp (overall light)

10 (8 a)

F11 (7.5 A)

Right headlight (overall sow).

Right rear lamp (overall light)

11 (8 A)

F2 (10 A)

Rotation pointers and alarm relay label (in alarm mode).

Alarm control lamp

12 (16 A)

F4 (20 A)

Element of rear window heating.

Relay (contacts) of the rear window heating. Plug socket for portable lamp. Cigarette

13 (8 A )

F15 (7.5 A)

Right headlight (Far Light)

14 (8 a)

F14 (7.5)

Left headlight (Far Light).

Control lamp inclusion of high headlights

15 (8 a)

F13 (7.5 A)

Left headlight (Middle Light)

16 (8 A)

F12 (7.5 A)

Right Headlight (Middle Light)

F1-F16 - Mounting unit 2114-3722010-60, 2114-3722010-18.

Figures from 1 to 16 - Installation unit of the old sample 17.3722

Scheme of the assembly block of fuses VAZ 2109, 2108, 21099 (block 17.3722)

(outer digit in the designation of the wire tip - the number of the pad, and the internal digit is the conditional number of the plug)

K1 - rear window washer time relay; K2 - Relo-lapse of the rotation and alarm indicators; KZ - wiper relay; K4 - Relay Control Lamps (inside the contact jumpers are shown, which are installed instead of relay); K5 - Relay of inclusion of far beam headlights; K6 - relay inclusion of fartoocomiters; K7 - power supply relay; K8 - Relay of the sound signal; K9 - switching on the motor cooling fan fan motor; K10 - relay switching on the heating of the rear window; K11 - Relay of inclusion of the headlights of headlights

Mounting block circuit VAZ 2109, 2108, 21099 fuses block ( 2114-3722010-60 )

K1 - headlight cleaners relays; K2 - Relo-lapse of the rotation and alarm indicators; KZ - windshield purifier relay; K4 - LAMP CONTROL RELABLE; K5 - power windows switching on; K6 - switching on the audio signals; K7 - relay inclusion of rear window heating; K8 - Relay of inclusion of far beam headlights; K9 - relay inclusion of headlights; F1-F20 - fuses

Conditional numbering of plugs in blocks of the WAZ mounting unit 2109-09-099 for connecting wires in Sa-Lona: sh9 - a block connected to the rear wiring harness; Sh1-sh4 - pads connecting with the wiring harnesses of the instrument panel

Conditional numbering of plugs in blocks of the VAZ mounting unit 2109-09-099 for connecting wires in the engine compartment: sh5 and sh6 - pads to attach the front wiring harness; Sh7 and sh8 - pads to connect the harness of the wires of the left mudguard; Sh11 - pad for joining aircut carriages

Questions:

Where is the stove relay on the VAZ 2109 - The relay itself stove for VAZ 2108, 2109, 21099 does not exist. In old models there is a ignition relay through which the stove is painted.

In more recent models of VAZ, the stove is powered through the ignition lock to direct.

Hello, today we will show where the fuse box is located on the VAZ 2108, 2109, 21099 and that each of them is indicating. Often, any electrician comes out on the car, wipers, headlights, dimensions, etc. are not working, in such a situation, you need to check the fuses.

The fuse block is under the hood at the windshield

Clicking on 2 locks remove the cover from the fuse block

Now we change the desired fuse, for this mounting block There must be special tongs, if not, then use passage or flat screwdriver

Here is the table designation of fuses and relays:

Fuse number ' Protected chains
1 (8 A) F9 (7.5 A) Right fog light
2 (8 A) F8 (7.5 A) Left fog light
3 (8 A) F1 (10 A) Headlight cleaners (at the time of inclusion). Purifier switching relays
Headlights (contacts). Phamp washer switching valve
4 (16 A) F7 (30 A) Headlight cleaners (operating mode). Relay Including Personnel Purifiers
(winding). Electric motor of the heater fan. Glass washer electric motor. Motor rear window cleaner. Rear layer time relay. Valves turning on the washer of wind and rear windows. Relay (winding) switching on the engine cooling system electrical fig. Relay (winding) turn on the heating of the rear window. Control 'rear window heating lamp.
Badge Lighting Lamp
5 (8 A) F16 (15 A) Pointers of rotation and relay-breaker of the rotation and alarm indicators (in rotation indication mode). Turn indicator test lamp. Rear lights (reverse light lamps).
Motor and windshield cleaning cleaner switching relay. The generator excitation winding (when the engine starts). Control lamp level of brake fluid. Oil pressure test lamp. Control lamp of the carburetor air damper. Control lamp of parking brake. Lamp light scoreboard "Sitor". Coolant temperature pointer. Fuel level index with a reserve control lamp. Voltmeter
6 (8 A) FB (10 a) Rear lights (stop light lamps). Salon lighting plander
6 (8 A) F6 (30 A) Electric windows front doors. Switching on power windows
7 (8 A) F10 (7.5 A) Loan sign lighting lights. Podcast lamp. Devices lighting lamps. Control lamp outdoor lighting. The backlight board of the heater levers. Cigarette lighter lighting lamp
8 (16 A) F5 (20 A) Electric motor fan engine cooling system and switching relay (contacts). A beep and relay of its inclusion
9 (8 A) F10 (7.5 A) Left headlamp (overall light). Left rear lamp (overall light)
10 (8 A) F11 (7.5 A) Right headlight (overall light). Right rear lamp (overall sow)
11 (8 A) F2 (10 A) Rotation pointers and alarm relay label (in alarm mode). Alarm control lamp
12 (16 A) F4 (20 A) Element of rear window heating. Relay (contacts) of the rear window heating. Plug socket for portable lamp.
Cigarette
13 (8 A) F15 (7,5A) Right headlight (Far Light)
14 (8 A) F14 (7.5 A) Left headlight (Far Light). Control lamp turn on the headlights of headlights
15 (8 A) F13 (7.5 A) Left headlight (Middle Light)
16 (8 A) F12 (7.5 A) Right Headlight (Middle Light)

K1.- Relays of headlight cleaners;
K2. - relay-breaker of the indicator of rotation and alarm;
KZ. - Window wiper relay;
K4. - restricency control relays;
K5. - switching on windows;
KB - switch on the sound signals;
K7. -Relane inclusion of rear window heating;
K8. - relay inclusion of high headlights;
K9. - relay inclusion of low light headlights;

The fuse of the rear fog lamps is under the driver's panel

To ensure the maintenance and repair of the electrical equipment of the car VAZ, applied a special approach to the layout of each of the components of the general system. That is, all relays and fuses placed in one compact housing of the mounting unit. The use of switching interconnected chains of various electrical equipment systems makes it possible to failure to set a large number of relays throughout the machine body and simplifies the repair process of their replacement. To search for faulty items, it is not necessary to disassemble the entire car - it is enough just to replace the device itself, which connects to the diagram with the help of unified connectors. This is helped by us. Next, we give the circuit of electrical principal MB for cars VAZ.

Pickup mounting unit 2107

Fuse number Protected chains
F1 (8A) (10A) Rear lights (reverse light). The electrothermost of the heater. Containing lamp and rear window heating relay (winding)
F2 (8A) (10A) Electric motors of the purifier and wrath of windshield. Elektro motories of purifiers and washers of the fleece. Reli Purifier of the wind windshield. Reli cleaners and flews of headlights (contacts)
F3 (8A) (10A) Spare
F4 (8A) (10A) Spare
F5 (16A) (20A) Rear window heating element and heating relay (contacts)
F6 (8A) (10A) Cigaretteer. Plug socket for lamp
F7 (16A) (20A) Sound signals and sound signals
F8 (8A) (10A) Running pointers in an alarm mode. The switch and the transition switch of the rotation indicators and alarm in the emergency signaling mode
F9 (8A) (10A) The voltage regulator of the generator (for a / m with the generator G-222)
F10 (8A) (10A) Rotation pointers in rotation indication mode and the corresponding control lamp. Turn on the electric motor of the fan (winding). Control lamp of the fuel reserve, oil pressure, parking brakes, brake fluid level. Continuous battery charge lamp. Distribution of devices. Voltmeter. Control system of electropneumoclap carburetor.Lelectric lamps of the parking brake
F11 (8A) (10A) Rear lights (stop signal lamps). Blumpboard internal body illumination
F12 (8A) (10A) Right Headlight (Far Light). Watching Relay Pharmacy Pharmacies (with Far Light included)
F13 (8A) (10A) Left headlamp (Far Light). Continated light light
F14 (8A) (10A) Left headlamp (overall light). The right rear lamp (overall light). Fluoright of the license plate lighting. Podcast lamp. Continated lighting light bulb
F15 (8A) (10A) Right headlamp (overall light). Alevant rear lamp (overall light). Lighting of the cigarette lighter lighting. Devices Lighting Lamps. Lighting Lighting Lighting Box
F16 (8A) (10A) Right Headlamp (Middle Light). Watching Relay Phase Phantom Persescent Relay (with Middle Light)
F17 (8A) (10A) Left headlight (Middle Light)

Mounting block circuit 2105-3722010-02Lada 21054, 21074

Chains protected by fuses

Fuse number Protected chains
F1 (10A) Reverse light bulbs. Electric motor heater. Rear window heating indicator signal. Rear window heating relay (winding).
F2 (10A) Wiper electric motors. Windshield washer pump electric motors. Wiper relay. Relays of cleaners and headlight washer (contacts).
F3 (10A) Spare.
F4 (10A) Spare.
F5 (20A) Element of rear window heating. Relay switching on rear window heating (contacts).
F6 (10A) Cigaretteer. Clock.
F7 (20A) Sound signal. Sound signal switching relay. Radiator cooling fan fan motor. Radio switching on the radiator cooling fan motor (Contacts)
F8 (10A) Rotation pointers (in emergency alarm mode). Turning signs (in alarm mode). Relay-breaker of the direction of rotation and alarm. Alarm switch with a control lamp.
F9 (7.5A) Lamps rear fog lamps. Turning on the rear fog lamps lamps.
F10 (10A) Rotation pointers (in rotation indication mode). Relay Breaker Running Pointers. Turning indicator signaling. Tachometer. Fuel index. Fuel reserve signaling device. Parking brake switching signal. Insufficient oil pressure warning device in the engine lubrication system. Coolant temperature pointer. Voltmeter. The alarm state of the working state brake system. Battery charge warningler. Plain electric fan. Generator excitation winding (generator 37.3701).
F11 (10A) Salon lighting plaffers. Stop signal lamps. Lighting lamps luggage compartment.
F12 (10A) Far light headlights (right block headlight).
F13 (10A) Far light headlights (left block headlight). Far light switching signal.
F14 (10A) Front overall fire (left block headlight). Rear overall fire (right lamp). Loan sign lighting lights. The signaling device for the inclusion of overall lights.
F15 (10A) Front overall fire (right block headlight). Rear overall fire (left lantern). Cigarette lighter lighting lamp. Devices lighting lamp. Bed lighting lamp. Clock (lighting lamp).
F16 (10A) Middle Headlight Light (right block headlight). Headlight cleaners relay (relay winding).
F17 (10A) Middle Lightlight (left block headlight).

Pickup mounting unit 2108

Here is the mounting block of the new sample. The block of an old sample scheme as a whole coincides, but some contacts (less than 5%) may not coincide.

Principal electrical circuit mounting block Lada Samara. (VAZ-21099 with the VAZ-2114 panel).

The numbering of the conclusions in the connecting pads, the color of the wires connected to them and electrical circuits.

Connector Contact Color wire Purpose
X1 (sh1) 1 B. power windows
2 G. ignition Switch (cl. 15/2)
3 GP
4 GG switch EL.Digator heater
5 R ignition Switch (cl. 30/1)
6 Kr ignition Switch (cl. 30)
7 locking doors
8 P ignition switch (cl. 50)
X2 (sh2) 1 BG rear window cleaner switch
2 G. switch Point Pointers (Right)
3 RP stop signal switch
4 B. lamp integrity control lamp
5 PC
6 GB left front door
7 ABOUT
8 34 far Light Control Lamp
9
10 4 turnover of rear fog lights
11 sch. fuel Reserve Control Lamp
12 PC fuel Level Control Lamp
13 BC salon lighting plander
14 Kg manual brake control lamp
15 gC switch of turn signs (left)
16 em. Chief of Faroocillary
17
X3 (sh3) 1 j. speed sensor
2 pP. emergency alarm switch
3 GP switch of turn signs
4 Sat oil level control lamp
5 C. weight
6 RB washing fluid control lamp
7 RO brake Lamps Control Lamp
8 3 B. farhead
9 Zhz. windshield Wiper Switch
10 PG portable Lamp Connection Cartridge
11 ignition Switch (CL. 15)
12 RF rear window washer switch
13
14 j. continuous headlight control lamp
15
16 SG oil pressure pointer
17
18 R
19 SO switch wiper
20 FROM switch wiper
21 ABOUT turnover of rear fog headlights
X4 (sh4) 1 Zp Incl. and rear window heating control lamp
2 GB headlight Light Switch (Far Light)
3 ABOUT wiper
4 BC switch outdoor lighting
5 TO resostat lighting devices
6 R battery
7 NF. windshield Purifier and Washer Switch
8 ABOUT block sh4 mounting unit terminal 3
9 Sch. sound signals switch
10 Bp stop signal switch
11 R battery
12 SP. headlight Light Switch (Middle Light)
13 warning light
14
15
16 RG brake fluid control lamp
17 ZB coolant temperature pointer
18 KB recharge Battery Charge Control Lamp
19 LC fog lamp fog
20 RZ coolant Level Control Lamp
21 J. tachometer
X5 (sh5) 1 3 far Light (right)
2 3h. far Light (left)
3 Sch. middle Light (left)
4 P starter (cl. 50)
5 PB radiator cooling electric fan
6 FROM middle Light (right)
X6 (sh6) 1
2 3
3 GC run signpost (left front)
4
5
6
7
8 LC overall Fire (Right Front)
9 BC telegrad electric fan.
10 LC overall Fire (Left Front)
11 G. rotation pointer (right front)
12 reverse Light Switch
13 RG brake fluid level sensor
X7 (sh7) 1
2 GG em. Chief of Faroocillary
3 B. em. Chief of Faroocillary
4
5 Sat oil level sensor
6 Sch. sound signals
7 FROM speed sensor
8 ZB cooling fluid temperature sensor
9 KB generator (cl. 61)
10 R windshield washer pump
11 BC switchboard lamp switch
12 RB washing fluid level sensor
13 RF brake lining
14
15 KP tachometer
16 RZ coolant level sensor
17 ZB relay fog lights
X8 (sh8) 1 Hp relay fog lights
2 LC fog pala (left)
3 J. fog pala (right)
4 GP ignition coil
5 R generator (cl. 30)
6 R generator (cl. 30)
7
S. RF relay fog lights
X9 (sh9) 1 RF
2 G. running pointer (right rear)
3 BG el Engine Rear Window Cleaner
4 Och rear fog lights
5 Sch. rear door
6 PC front door right door
7 BC salon lighting plander
8 Kg manual brake sensor
9 BC open door alarm buttons
10
11 FROM license plate lighting lamp
12 GB front door left
13 B. salon lighting plander
14 P stop signals
15 J. overall Fire (Right Rear)
16 3 reversing lamp
17 LC overall Fire (Left Rear)
18 GG rear window cleaner
19 rear window heating elements
X11 (sh11) 1 J. pump
2 RF rear window washing valve
3
4 J. pump
5 BC podcast lamp
6
7
8 KC. podcast lamp
9 B.
10 em. Window Wiper Window
11
12 SO oil emergency pressure sensor
13
14 R windshield washing valve
15 SO em. Wiper wiper
16 FROM email engine wiper
17 ZB email engine wiper
18
19

Pickup mounting unit 2109

The assembly unit of the VAZ 2109 is designed to combine wiring harnesses, as well as for placing relays and fuses. On the first models, a mounting unit of type 17.3722 was used. It consists of a housing consisting of two parts and the printed circuit board for which the conclusions are soldered to connect with the pads of the wiring harnesses, the installation of the relay and fuses.

On cars S. injector Engine Mounting blocks are used similar to 2114-3722010-60, but they differ in the connection of the radiator cooling fan.

Fuse number ' Protected chains
1 (8 A) F9 (7.5 A) Right fog light
2 (8 A) F8 (7.5 A) Left fog light
3 (8 A) F1 (10 A) Headlight cleaners (at the time of inclusion). Purifier switching relays
Headlights (contacts). Phamp washer switching valve
4 (16 A) F7 (30 A) Headlight cleaners (operating mode). Relay Including Personnel Purifiers
(winding). Electric motor of the heater fan. Glass washer electric motor. Motor rear window cleaner. Rear layer time relay. Valves turning on the washer of wind and rear windows. Relay (winding) switching on the engine cooling system electrical fig. Relay (winding) turn on the heating of the rear window. Control 'rear window heating lamp.
Badge Lighting Lamp
5 (8 A) F16 (15 A) Pointers of rotation and relay-breaker of the rotation and alarm indicators (in rotation indication mode). Turn indicator test lamp. Rear lights (reverse light lamps).
Motor and windshield cleaning cleaner switching relay. The generator excitation winding (when the engine starts). Control lamp level of brake fluid. Oil pressure test lamp. Control lamp of the carburetor air damper. Control lamp of parking brake. Lamp light scoreboard "Sitor". Coolant temperature pointer. Fuel level index with a reserve control lamp. Voltmeter
6 (8 A) FB (10 a) Rear lights (stop light lamps). Salon lighting plander
6 (8 A) F6 (30 A) Electric windows front doors. Switching on power windows
7 (8 A) F10 (7.5 A) Loan sign lighting lights. Podcast lamp. Devices lighting lamps. Control lamp outdoor lighting. The backlight board of the heater levers. Cigarette lighter lighting lamp
8 (16 A) F5 (20 A) Electric motor fan engine cooling system and switching relay (contacts). A beep and relay of its inclusion
9 (8 A) F10 (7.5 A) Left headlamp (overall light). Left rear lamp (overall light)
10 (8 A) F11 (7.5 A) Right headlight (overall light). Right rear lamp (overall light)
11 (8 A) F2 (10 A) Rotation pointers and alarm relay label (in alarm mode). Alarm control lamp
12 (16 A) F4 (20 A) Element of rear window heating. Relay (contacts) of the rear window heating. Plug socket for portable lamp.
Cigarette
13 (8 A) F15 (7,5A) Right headlight (Far Light)
14 (8 A) F14 (7.5 A) Left headlight (Far Light). Control lamp inclusion of high headlights
15 (8 A) F13 (7.5 A) Left headlight (Middle Light)
16 (8 A) F12 (7.5 A) Right Headlight (Middle Light)

Pickup mounting unit 2110

Chains protected by fuses

Fuse number Protected chains
F1 (5A) Lamps Lighting Lighting Number Sign Lighting Lighting Devices. Continated lamp of overall light. Lighting of the trunk. Lumes of overall illumination of the left side
F2 (7.5A) Left headlight (Middle Light)
F3 (10A) Left headlight (Far Light)
F4 (10A) Right fog light
F5 (30A) Electric motors of glass doors
F6 (15A) Portable lamp
F7 (20A) Engine cooling fan fan motor.
F8 (20A) Heating element of rear window. Relie (contacts) on the inclusion of rear window heating
F9 (20A) Recycling valve. The supervisors and the washers of the wind, rear window and the headlight (winding) of the rear window heating
F10 (20A) Spare
F11 (5A) Lamps of the overall light of the right side
F12 (7.5A) Right Headlight (Middle Light)
F13 (10A) Right Headlight (Far Light). Continated Light Far Light Lamp
F14 (10A) Left fog light
F15 (20A) Electrical heating seats. Blocking the trunk lock
F16 (10A) Relo-lapse of rotation and alarm indicators (in alarm mode). Continated emergency signaling lamp
F17 (7.5A) Lighting Lighting Salon. Lamp individual illumination. Lightlightening of the ignition switch. Laps of stop signal. Chances (or route computer)
F18 (25A) Lighting Lighting Badboxes. Heater Controller. Crew
F19 (10A) Locking door locks. Level control of the fee of the stop signal and overall light. Turn indicators with control lamps. Lights of reverse light. Winding excitation of the generator. Block indication of the on-board control system. Combination of devices. Chances (or route computer)
F20 (7.5A) Lamps rear fog lamps


Diagram of the combination of appliances VAZ
2110, 2110, 2111, 2112

Pickup mounting unit 2113, 2114, 2115

Mounting block diagram VAZ-2113, 2114, 2115 version number 1.









Scheme of the installation block VAZ-2113, 2114, 2115 version number 2.

Plug numbering in the connecting blocks of the VAZ 2113, 2114, 2115

Mounting block of new samples-2113, 2114, 2115. Location of fuses and relays.

K1-relay inclusion of headlight cleaners;
K2-relay-lapse of rotation and alarm indicators;
K3-relay windshield wiper;
K4-relay control of the health of lamps;
K5-relay power windows;
K6-relay inclusion of sound signals;
K7-relay turning on the electrical heating of the rear window;
K8-relay inclusion of high beam headlights;
K9-relay inclusion of low light headlights;
F1-F20 fuses;
X11 - Conclusions of the shirl harness pads

Table chains protected by fuses on VAZ 2114

POSSIVER number Current strength Chains that protect the fuse
F1 20 Relays include rear fog lamps. Laps of the rear fog lamps. Alarm for the inclusion of rear fog lamps
F2. 10 Turn Pointers, Ravenger Relay Turning and Alarm Pointers (In Alarm mode) Alarm control lamp
F3. 7.5 Front cabin lighting plander. Central cabin lighting plander. Floor lighting luggage compartment. Lamp lighting the ignition switch engine control system control system. Brake signals lamps. Route computer (if installed)
F4. 20 Cartridge connecting a portable lamp. Relay switching on rear window heating (contacts). Rear window heating element
F5 20 Sound signal. Sound signal switching relay. Electric motor fan cooling system. Fuse fan.
F6 30 Power windows. Turning on power windows (Contacts)
F7. 30 Electric motor heater. The fuse of the stove of VAZ 2114, VAZ 2115. The windshield washer electric motor. Electric motors headlight cleaners (in operation) Cigarette lighter fuse. Bed lighting lamp. Rear-glass heating relay (winding)
F8. 7.5 Fuse on the fog VAZ 2114, 2115 - Right fog light
F9. 7.5 Fuse on the fog VAZ 2114, 2115 - Left fog light
F10. 7.5 Lamps of overall light on the left side. Lamp signaling device on overall light. Loop lighting lamps. Podkapota lamp Device lighting switch. Fuse lamp lighting switches, appliances, cigarette lighter, ashtray, heater control levers
F11 7,5 Lamps of overall light on right side
F12. 7,5 Right headlight (sled)
F13 7,5 Left headlight (Middle Light)
F14 7,5 Left headlight (Far Light). Far Light Light Heights Lamp
F15 7,5 Right headlight (Far Light)
F16 15 Turn pointers, rotation relay and alarm relay (in rotation indication mode). Reverse light bulbs. Relay Control Lamps. Block indication of the on-board control system. Combination of devices. Lamps of insufficient oil pressure lamp. Lamp signaling device for parking brake (stop fuse signals). Lamp signaling device brake fluid level. Battery discharge warning lamp. Route computer (if installed). Generator excitation winding (in engine start mode). Front wiper. Seat heating control.

One of the reasons for the problems faced by car enthusiasts are faults of fuses on the VAZ 2109. Therefore, to have an idea how the fuses of the VAZ 2109 are performed, each driver is needed, and even better to have skills to warn such a breakdown.

VAZ 2109 fuse functions

Fuses are in two blocks: one is located under the hood, the other is inside the car interior under the panel. The purpose of any fuse is the protection of a certain device of the VAZ 2109 from overheating and ignition.
When the energy is accumulated in the electrical circuit of the machine, a closure may occur, and this leads to a breakdown of one of the instruments. In this case, the fuse takes the whole blow to himself.
The price will be significantly less than any other device that it protects.

Decryption of Fuses VAZ 2109

Fuse number What answers:
F9. Right fog light
F8. Left fog light
F1 Player for fleece
F7. Heater and radiator fans, washer pump motor, rear window washer, glover lamp, heating and rear window washer.
F16 Rear lights, light bulbs to indicate turns, brushes for windshield, brake fluid level sensor, generator.
F16 Air damper carburetor, oil pressure, hand brake, coolant, door opening, check lamp, fuel level, poured into the tank.
F3. Rear headlights, light in the cabin.
F6 Power windows
F10. Illumination of the number, lighting devices and dashboard, dimensions, cigarette lighter.
F5 Sound signal
F11 Gaspel Rear Light
F2. Emergency situation
F4. Element serving to heat rear glass, Relays to turn on this heating, cigarette lighter, connecting the cartridge of the portable lamp.
F15 Headlight Rural
F14 The headlight is left
F13 Middle Light Headlights Left
F12. Middle light headlights right

Replacing car fuses VAZ 2109

Replacing the fuses on the VAZ 2109 is performed in the block installed in the rear of the engine mount compartment, from the driver side. Most electrical chains of auto protected fuses.
Inside the fuse block on the lid, the current strength and the fuse number are applied in amps.
When the VAZ 2109 fuse block is open, the replacement is made to those elements that led to a malfunction of the automotive device. It is possible to determine it by termination or unstable work A node that feeds on electricity.
In the car VAZ 2109 are not subject to protection for fuses:

  • Ignition chains.
  • Generator (see).
  • Starting engine.
  • Door lock relay.
  • On headlights.

This allows not to install additional elementswhich in any, the most inopportune moment, can exit.

Tip: You always need to have a set with spare fuses and should be replaced with your own hands if necessary.

  • Each of the blocks correspond only to certain fuses.
  • The value of the current calculated for the fuse is indicated on its housing.
  • Removing the fuse from the block is needed by a special tweezers fixed in the block.
  • A fuse is captured by tweezers and pulls out.

  • Spare fuses are installed in front of the block.
  • Replacing the VAZ 2109 fuse is made by installing it into the slot connector and pressing until fixing.
  • On the left side of the instrument panels, an additional fuse is installed on the wires, which protects the chain of fog rear lights, with a current of 8 amp.

Tip: Before installing a new fuse, it is necessary to clearly determine the reason for which it burned, only after that replacing the new one.

Replace fuses on the VAZ 2109 can only be calculated for the current current strength. Otherwise, electrical appliances may fail.
In the early models of the car VAZ 2109, the fuse block consists of finger elements, they differ in low reliability. Fuse holders are performed from springs, and in the place where a bad contact is highlighted a lot of heat, which can melt the body of the block, which causes the httop of holders and they poorly clamp the parts.
Therefore, it is necessary to replace the block of fuses VAZ 2109 of an old sample to a new one, with fork elements.

Tip: If the old fuse block is replaced, new VAZ 2109 provides in the engine cooling system, connect the fan motor through the relay. Otherwise, they can burn the tracks on the printed circuit board that spend current.
In addition, you need to install the sensor to the electric fan for its inclusion, due to the fact that its contacts are calculated to the longer value.

Dismantling Block Fuses Auto VAZ 2109

A set of driver tools is used for work.
Instructions for performing work:

  • Rechargeable battery is disconnected.
  • Disassembled in the salon "Bardac".
  • On the side of the seating for the passenger, the connectors of the wiring harnesses are disconnected. Each element has its own color. For the correct assembly under each connector there is a circle of the corresponding color.
  • In the rotor part of the car removed the cover of the mounting unit.
  • The knuckles on the "10" are unscrewed nuts fixing the fuse block.
  • The device is lifted, the four connectors and one from behind are disconnected.

  • The mounting unit is removed.
  • Gasket is cleaned, as shown in the photo.

Repair of block with car fuses VAZ 2109

So:

  • All relays and fuses are extracted.

Tip: When assembling, it is necessary to monitor that the nominal value of the current corresponds to the installed fuse. Installation in the lift relay is performed with the marking of its place so that there is no confusion when assembling.

  • The burnt track is found.
  • The plot came into disrepair.
  • Oxidized places are cleaned with gasoline.
  • A new wire solder.
  • The block assembly is performed by the disassembly.

Timely repair, replacing the old block of fuses VAZ 2109 will increase the reliability of the vehicle nodes, and their serviceable state is the security deposit when the car is moving along the roads. As is performed on the car VAZ 2109, it is clearly visible on the video.