Oil for Kia Rio (Kia Rio) - the best options. What oil to pour into the engine Kia Rio what oil pouring Kia Rio

Make the engine oil replacement by car Kia Rio You can at the station maintenance (One hundred) or independently. This procedure is described in a detail in the manual to the car, and does not represent much difficulty. If you take into account the price of a hundred, then it is best to produce oil to replace yourself. This will significantly save the family budget.

Usually, replacing engine oil at Kia Rio 2011-2017 do it yourselfNo different from the procedure, which is carried out at the service station. Recommended replacement periodicity motor oil at Kia Rio 15,000 km. But in practice, it is better to replace in 7000-10,000 km. This is not surprising if you take into account the condition of the roads and the city pace of the car movement with frequent stops. All these circumstances lead to a rapid deterioration in the quality of engine oil. First of all, the lubricants and cleansing oil properties deteriorate, which strongly increases the engine wear and reduces its resource. At the same time, with the replacement of motor oil, you should not forget to replace the oil filter. Oil and filter always change simultaneously on any car.

In practice, the replacement of oil on Kia Rio independently can be carried out in two ways:

- Vacuum oil pumping. Vacuum pumpingAs a rule, it is performed through a hole for the engine oil level. This method is good because there is no need for a lift or overpass. The main disadvantage is the need to use special equipment that is available and not at any time.

- Drain from the car's pallet. The second, traditional and proven decades the method is more reliable, since all waste is accumulated precisely in the engine pallet. Vacuum pumping is simply not able to pump out all the spent oil from the pallet.

To replace the oil, we will need:

1. Oil filter - 26300-35503.
2. Engine oil - as a rule, official dealer Pour the barrel shell Helix Ultra 5W-30, he recommends KIA plant. But you can buy in the usual four liter canister. When choosing an oil, it is worth considering what is indicated in the warranty: 5W-30 oil SN or SM (SN is better, since more modern standard).
3. Laying the drain plug of the engine crankcase pallet - 21513-23001
4. The key to "17" to twist the drain plug.
5. Wash oil 3 liters.

Change of oil.

The replacement process is made on a heated engine, the heated oil is more fluid and easily merges from the lubrication system.

- After a ten-minute engine warming, you need to call on watching pit. If necessary, it is necessary, this is not done, you should unscrew several fastening bolts. It hurts us when replacing the oil filter. With a certain level of skill, it is possible to remove the protection not completely, and unscrew only two bolts of fastening to the subframe.

- Then it is necessary to drain the spent oil from the crankcase in the capacity specifically prepared for this purpose. Carter cork need to be touched very carefully, as the oil is very hot, it is better to use gloves and glasses.

- After the oil is glass, the cork can go in two ways, replace using washing oil And without it:

1. With washing butter. Spin drain plug After replacing the plot plugging, and pour about 3 liters of washing oil. Give the engine to work for about 10 minutes, and again drain the oil. (There is a way to remove the remains of washing oil, repeating the flushing procedure only at the same time using 2-2.5 liters of oil, which you will fill when replacing.).
2. Without washing oil. In this embodiment, remove the remnants of the spent oil from the crankcase, for this we use a syringe with a curved needle.

The question of the use of washing oil is in cases where it is not known which oil was flooded earlier or a transition to another oil type is made. In other cases, you can do without its use. Modern engine oils and so have detergent and cleansing properties in the required volume to clean the engine lubrication system.

- Now you can twist an oil filter for replacement. As a rule, it can be done by hand without using a special tool. Before installing the new filter, it is worth pouring 150-200 ml of oil. Then carefully screw the new oil filter Hands. For tightening the filter of the forces of the hand, it will allow, on the next replacement it is easy to twist it with your hands.

If you remove the filter with my hands did not come out, it's not a misfortune to be a special tool or an old grandfather way. Everything is simple, we take a screwdriver thoroughly and hammer, we pierce the filter through the screwdriver and unscrew it with this lever.

- After executing all the procedures, the key to "17" is tightened with a drain plug, pre-replacing the gasket.

Often car enthusiasts, when buying engine oil, pay attention to the base liquid base: synthetics, semi-synthetic, mineral. At the same time do not pay attention to the class, type, viscosity of the car. Such actions can lead to premature output. power aggregate out of service. Will buy correctly lubricantspecified in the car manual. In this article, we will look at the recommended engine oil for Kia Rio in accordance with the instruction manual.

Plant engineers - car manufacturer when selecting engine oil for specific model Auto, take into account technical specifications Motor and operating conditions under which it will work. Conducting appropriate tests for various lubricants on a particular motor allows you to choose the optimal automotive, which contributes to a decrease in the fuel consumption and the extensive resource of the force aggregate. According to the test results, the manufacturer makes the recommended engine oil for Kia Rio into the car operation manual. The manual indicates viscous characteristics and compliance with lubrication with the requirements of the API systems, ILSAC, ACEA.

Carrying out the selection of lubricant for Kia Rio, take into account the season by side the car. Automal, designed for winter more flowable than fluids designed for the summer. You can buy all-season lubricant liquid. It is also worth familiar with the tolerances on the canister of the car. The presence of the tolerance of the plant - the manufacturer of a particular model of the machine indicates the compliance of the oil with the requirements of the manufacturer of the car.

Kia Rio JB 2005-2011 release

1. For motors working on gasoline:

• quality class according to API -SM or more, in the absence of the specified car, you can use SL liquids.;
• according to the ILSAC standard - GF-4.

1. In diesel power units:

• according to the API specification - CH-4 or higher;
• in accordance with the ACEA - B4 system.

According to Table 1, pick up a lubricant suitable for viscous characteristics, given temperature mode Beyond the car.

Table 1. Viscosity depending on the temperature range.

* 1 - achieve savings fuel mixes Allows the use of auto-relevant parameters:

• according to SAE 5W-20;
• according to the API - SM system;
• in accordance with ILSAC - GF-4.

From Table 1, follows, for example, in the temperature range of from-30 0 s (and less) to +50 0 s (or more) for petrol engines, use liquids 5W-20 or 5W-30. For diesel units, it is recommended to use 15W-40 at a temperature of from-17 0 s to +50 0 s (or more). The temperature range for the remaining types of lubrication is calculated similarly.

Kia Rio QB 2011-2014 releases and Kia Rio QB FL 2015-2017 release

Based on the instruction manual for the machine, for motors of 1.4 l and 1.6 liters, working on gasoline should be used motor liquidscorresponding to the characteristics:

• according to the classification of API -SM or more, in the absence of the specified oil, you can use SL liquids.;
• according to ILSAC - GF-4 or higher.

Requirements for viscosity characteristics of oil, similar to Kia Rio JB 2005-2011, so the necessary lubricant can be selected from table 1.

Reducing fuel consumption contributes to the machine with characteristics:

• sAE 5W-20;
• in accordance with the API - SM;
• according to ILSAC standards - GF-4.

Conclusion

Lubricants have different turnover and chemical composition of additives. Therefore, it is better to use the recommended engine oil for Kia Rio. The fill that does not respond according to the parameters of the car reduces the operating characteristics of the motor, increases the fuel consumption. If the lubricant is too thick or liquid - it will lead to a deterioration in the protection of the power unit and its premature wear. Preferably pour original oilsWith their absence, it is allowed to use liquids that meet all the characteristics set forth in the manual to the car.

21.04.2018

Kia Rio - compact car B-class, successfully sold in our country for more than 10 years. At the same time, Rio Second (2005-2009 GV) and third generations (from 2011) are most popular. They are considered reliable, dynamic, unpretentious, inexpensive in service and repair. These cars were installed four-cylinder gasoline engines with a volume of 1.4 or 1.6 liters. One of the modifications of the second-generation car was installed a diesel engine with a volume of 1.5 liters. We will tell what oil to fill in Kia Rio, how to choose its markings and not make a mistake with the brand.

The engines of these machines, with proper operation and timely maintenance, rarely cause complaints, they are modern and reliable, possess a good burden, unpretentious to the quality of fuel. In the matter of their durability and maintainability, not everything is so unambiguously (it is mainly for the third generation), but it is unlikely to worry about several hundred thousand kilometers about it.

Engine Kia Rio.

Resource anyone car Engine highly depends on quality fuel and lubricants. The use of only high-quality fuel and timely can significantly extend the life of the motor and to save the owner from expensive repairs for a long time.

Choose marking and viscosity

What to choose the correct engine oil labeling to have at least minimal knowledge in the notation that manufacturers indicate packages. The main characteristic is the SAE viscosity class. It depends on this indicator how well the fluid will be distributed over the internal working surfaces and protect them from premature wear. The figures in the SAE designation indicate the frost resistance of the oil and its stability to the loss of properties while increasing the temperature to +100 degrees Celsius. The smaller these numbers - the less viscosity.

SAE viscosity class depends on how complete and efficient will be the lubrication of the engine working surfaces in different conditions. This is especially important when starting, warming, negative temperatures, while running a new car.

Other an important characteristic are the specifications of the API and ACEA. When using the engine oil of the recommended specification, wear of the KIA Rio motor friction surfaces are reduced, the engine and fuel consumption is reduced, the engine noise is reduced, the service life of the catalyst and some other parts of the exhaust system increase.

What oil to pour into the engine Kia Rio? The opinions of some manufacturers of lubricating liquids, as well as motorists on this score, may vary. We strongly recommend in this issue to contact the recommendations of the manufacturer of the car itself. It is he who is known to the smallest constructive features Engines, and it is most interested in their trouble-free work during the entire service life.

To properly choose oil into the Kia Rio engine, take into account the temperature conditions in which the car will be used, and select the recommended viscosity values \u200b\u200bfrom the table.

Range of operating temperatures for motor viscosity oil kia Rio

For maximum fuel economy and engine protection, it is recommended to choose engine oil with a SAE 5W-20 labeling viscosity coefficient (API SM / ILSAC GF-4). If the data brand data are not available, choose that the viscosity of which is most suitable for your conditions. The most frequently used in our country and distributed on sale is a liquid with a labeling of 5W-30.

Owners car Kia. Rio 2011-2015 It has long been done to make sure the reliability of the power units, which the manufacturer kindly comes with these practical Korean models. But we note the well-known fact that without the appropriate leaving, any motor threatens breakdowns, and his cells will turn out only in the pleasant memories of the negligent owner of Kia Rio.

The most important point in the maintenance of power kia aggregate Rio is compliance with the regularity of oil replacement according to regulatory frequency. It is recommended to be inclined to the designated procedure more often than declares this to make the manufacturer. Many are interested, what oil pouring?

No one dared to challenge the fact of the need and importance of timely replacement of lubricant in the motor. Also does not bypass the side of this fair judgment and practical model Kia. Rio 2011-2015 When operating on the engine, an increased and responsible load is placed, which involves the presence of high-quality oil in its depths.

Among the main parameters characterizing the lubricant, it appears its viscosity, which allows to identify the degree of fluidity. Only applying the correctly selected lubricating fluid, you can provide the motor of your car guaranteed protection against premature wear.
Motors that are equipped with Kia Rio, suggest the use of oils, whose viscosity implies a value in "5" units, for example, "5W-30" or "5W-40". Should not forget about oil filterwhich is subject to replacement simultaneously with the oil regardless of its condition.

How to choose oil?

What kind of oil to fill in the engine? Before traveling to the store, with the aim of buying lubrication, it should be carefully familiar with the fluid parameters and determine the applicability of it to the Kia Rio motors of these years of release. Taking into account the aspects designated aspects, we make several relevant options that further describe in detail.

These are liquids of such brands:

• « Shell Helix. ULTRA ";
• "Total Quartz";
• "Divinol";
• "Zic XQ Ls".

The first of the designated options is unconditionally suitable if the ratio of the value of the product with its qualitative aspects is considered. During the analysis, it was revealed that the liquid is endowed with a complete complex of needed substances and additives, which is justified suitable motors Kia Rio. In addition, this oil brand is able to not lose its condition even for a long period of use in the motor. And this is a very substantial plus.

"Total Quartz" is also capable of boasting excellent and balanced characteristics, allowing to ensure the safety of the motor nodes. The cost of this embodiment is acceptable, and the fluid works out with 100 percent results. As with the previous case, this lubricant can maintain its conditional quality throughout the impressive period (run) of its use.

Lubricating liquid "Divinol" is not characterized by a large consumption. Despite the small fame of the brand, this circumstance is in no way reflects on the qualitative aspects of the specified product. Option is excellent choice And the Kia Rio motor will reliably protect from the intensive wear of its nodes.

Zic XQ LS oil acts as a rather balanced product with a democratic price. The liquid boasts an impressive list of additives, which makes it possible to ensure not only the engine protection, but the purity of its inner cavities.

What option from the above oils is the best? What kind of oil to fill in the engine? It is very problematic to determine this, because they are all worthy products. You can also choose another manufacturer, however the options given by us are characterized by the greatest optimality in terms of the ratio of the price parameter and quality condition.

To the first replacement of oil in a new unit should be resorted after mileage of 3 thousand km. The subsequent frequency of the procedure usually does not exceed 10 thousand km. For fill, we flatter the volume equal to 3rd liters. After replacing, control the oil level and do not allow it over the mark "F". The main thing before the replacement is to determine which oil to fill in the engine.

Replacement process

When you were determined what oil to fill in the engine, the question of replacing. To replace the liquid, it is not necessary to attend the service, because this procedure can be performed independently.

1. To do this, we place the car over the pit and unscrew the plug for the drain located on the surface of the pallet.
2. Since the process executes the presence of a heated motor, we take into account the security measures, in order not to burn your hands.
3. We substitute for draining the appropriate packaging and waiting for a complete waste of the waste liquid.
4. During this time, we manage to replace the filter of the unit lubrication system.
5. If you use a syringe with a segment of the hose, then you can pump out the remnants of the mud and oil fluid from the inner cavity of the bottom of the pallet. The procedure is not mandatory, but it will definitely not be superfluous.
6. We twist the plum plug by tightening with the required regulatory torque, and proceed to the fill of the "fresh" lubricant.
7. Control the sufficiency of the level, not forgetting the inadmissibility of its exceeding over the previously indicated marker.

Summarize

In the material we provided some tips in part right choice Oils and its own replacement, but you decide which oil pouring. The main point during the selection is the correspondence of the characteristics of the fluid and the needs of the motor, which ensures compatibility and the pledge of the durable operation of the unit. Boldly choose a product from the list given, which will allow you to gain confidence in the "good health" of the motor during the entire regulatory period of oil use.

The topic of choice of oil for Kia Rio is extensive. On all the lineup Korean cars are installed very reliable engines. However, if you do not exercise laid, without timely diagnosis of anyone, even the most reliable motor Start to bring.

Regular frequency of oil change in Kia Rio - one of important stages In car maintenance. This is especially true of those cars that are already in operation for a while. The engine receives a serious burden, and therefore it suffers from premature wear without proper care.

The periodicity of oil replacement depends on the manufacturer's recommendations. In order not to wear, the manufacturer recommends replacing the product at least in 10,000 km run. In this case, about three liters of fluid poured into the engine. The obvious fact is that the oil needs to be changed in a timely manner and regularly. The main indicator in order to decide whether the oil change is needed, it is its viscosity or yield strength.

Simultaneously with oil in service centers, always. If you decide to make a replacement procedure yourself, consider some different years of release.

For example, for cars 2015,2012,2013,2014, you can choose a few suitable options:

• Shell Helix Ultra;
• Total Quartz;
• Divinol;
• Zic XQ Ls.

The price-quality analysis shows that the best option from the presented - Shell Helix Ultra.. The corporate product includes the entire set of additives and minerals. Using it for the Korean Rio is quite justified. Shell does not lose its positive qualities with long-term active use, which is also the undoubted plus for the oil of this company.

Total Quartz. It can boast of impressive characteristics. This oil is also capable of saving all parts of the engine in working condition. The price of the corporate product is also not large. The initial characteristics of additives and mineral substances included in the oil retain their quality even with the active long-term operation of the vehicle.

Oil firm Divinol Differs from previous low consumption. Despite the fact that the brand has not received wide advertising in the media, they are actively buying knowledgeable motorists. The option is quite suitable for KIA, since it copes with all the functions for the protection of the engine.

Butter Zic - another product selling affordable price. An impressive list of additives included in its composition may be alert. However, they directly affect the protection of the motor from premature wear. It can be boldly pour into the Rio engine.

If we consider the choice of oil in terms of choosing a brand, then the occupation is practically useless. Each car owner has its own preferences. It is unlikely that someone wants to change the brand, only after reading one article. Moreover, the manufacturer of Rio does not recommend changing the brand of oil. If you purchased one specific product to replace, then it is better to use it in the future. Either use the services of the same auto repair shop.

If you carefully study specifications In Kia, you can highlight the following important information:

• the manufacturer recommended by the manufacturer - Shell Helix;
• refueling volume 3.3-3.49 liters;
• classification API SERVISE - 4 or higher;
• temperature range for recommended viscosity values \u200b\u200bfrom -30c (5W20) to +50 (20W50)

At the same time, the driver for the driver says, which is before pouring the oil, it is necessary to verify the purity of the surface near the covers of the fuzzy neck, as well as the bay hole. In purity there should be a wizard probe. These indicators are especially important if the car is operated in dusty contaminated conditions. For example, when driving around country ground tracks. Timely cleaning of these parts (probe and lid) will save the engine from dust and sand.

Kia Rio engines of later releases are made with the lack of gaps between driving items. The oil with a smaller viscosity is better penetrated into the gaps, better lubricating the details. Oil with a viscosity of 5W-40 almost does not flow into narrow gaps, leaves them without lubrication. Because of the wrong oily oil, the early wear of the engine occurs. That is why it is important to comply with all manufacturer's recommendations when replacing oil. This requirement is really as for gasoline enginesAnd for diesel.

More importantly choose oil for engine Kia. Not by the name of the brand, but by the quality class API, ILSAC. It is important to consider what to each generation Kia. Manufacturer recommends miscellaneous oil. Than modern engineThe higher the quality should be in the product. API SL and ILSAC GF-3, for example, is recommended only for Kia first generation. The release of 2000-2005 will be fully suitable for cars and higher oil quality - API SM / SN and ILSAC GF-4 / GF-5.

RIO 2005-2009 issues requires use oil api. SM and ILSAC GF-4. As in the previous case, the oil is higher, for example, the API SN and ILSAC GF-5 - quite suitable option. Lower quality oil is impossible to use. Kia Rio 2015 recommends using API SN and ILSAC GF-5 quality oil. If we are talking about Kia Rio with diesel engine, on the manufacturer's recommendation, use oil quality API CH-4, but below. A better product is quite suitable, for example, oil Hyundai. PREMIUM LS DIESEL 5 W30.

So, one rhetorical question remains in the matter of choice of oil for Rio: synthetic or semi-synthetic. To say that one kind of oil is worse, and the other is better, it is impossible. As we have already disassembled above, there is suitable oils For the engine, and there are unsuitable, among those and others there are high-quality, and there are poor quality.

According to most people, it is better to choose synthetic oils for engines Rio.. Such oils do not lose their properties with long-term active operation of the car. However, synthetic oils are more expensive than semi-synthetic.

Information for those who are important to save: there is another little-known view of oils - hydrocracks. Ei oils are produced from oil hydrosintrite. This type of recycling is low at cost, and therefore the final product is significantly cheaper than other types of oils. True, quality such oils lose faster synthetic. The oil is suitable where the car engine is not subjected to serious wear. That is, for owners who use their KIA not often.