What should be considered when choosing janitors on cars Kia Rio and other models? We change the brushes of the wiper Rio choice of optimal options.

27.09.2019

Replacing janitors by car Kia Rio is made as their wear. Usually, the service life of the coils of janitors is at least a year, after which the rubber tape of the wiper is clogged and deformed. On the windshield, this is reflected in the form of distinctly not washed dirty stripes. If only the cleaning element is impossible to replace, then the janitor, together with the frame, is changing entirely.
The process of replacing janitors is very simple and takes no more than 2-3 minutes, even a novice car enthusiast can cope. Work can be performed in any atmosphere - in the garage, in the parking lot or on the side of the route. It produces in such a sequence: raise and fix the janitor, flexing the latch fixing the janitor on the leash, weching the wiper brush down the hook. Installing a new brush We produce in reverse order.
It is important to remember that the need for replacement may occur at any time, for example on the track while driving, with a sharp deterioration of weather conditions, so experienced motorists always have in stock suitable replacementSo that the details are always at hand.

Attention! This video is not official Instructions and guidance on the repair of the car.

Video with more simple way replacements -

br /\u003e
On some kIA equipment Rio 2011-2018 Hybrid Wipers Denso Wiper Blade are installed, but new wipers are quite expensive, and the replacement of the rubber band is a good way to return the old wipers to life. Gum with Aliexpress will cost only 250-300 rubles per set.

Elastic size for Kia Rio 3 - 26 "and 16" inches (65 mm and 40 mm)

Http://kiariofaq.ru.

How to replace wipers (wiper brushes) on the example Kia Picanto. Or any car with leashes in the form of hooks. Brushes - Lynx. As well as replacing the gum of the wiper brush.
Avtotests, travels here: Er-erka.Ru

It is not well saved, and instead of "janitors" assembly, we change the gum on them. 🙂
For the most impatient: Repair starts at 3:22

Many fresh and actual articles read on my channel Yandex.Dzen Over 9000: https://zen.yandex.ru/over9000
Sign up!

# Over9000 # auto # repairAvto # Over9000 # jannors # rubberries # wiper # brush

Subscribe to My Channel: httpse.com/www.youtube.com/channel/ucioxjdi_pjmd_l95wrx3kvg

And on my second channel about radio-controlled models:
https://www.youtube.com/channel/ucot_a0fynxs-cnntwm0nrcg.

See also:
How to choose Saab 9000? Part 1: Body

br /\u003e How to choose Saab 9000? Part 2: Salon

br /\u003e How to choose Saab 9000? Part 3: Electrician (1/2)

What you need to know in order to change the wipers on your car. Replacement Brusons Cleaner Glass windshield.

How to protect the wheels from theft. Secret bolts (nuts)

Overview of the wiper brushes at Kia Rio. Type of fastening, features, size, articles and advice how to choose the right wipers at Kia Rio of all generations - in this article.

Brush size and fastening type

The first generation of Kia Rio was produced in 2 types of body: sedan and wagon. Years of release: 2000 - 2005. Universals were additionally equipped with a janitor on the rear window.

More a budget option hybrid janitors in Rio - Heyner "Hybrid"will come up a pair of brushes of the following articles 031 000 and 028 000

Frame brushes

Looking for more available option, or simply prefer frame brushes. Then I can offer such options for you:

Set of two brushes with spoiler Bosch. Twin Spoiler 531 S ( 3397118403 ).
Another good set - frame Valeo. Compact Standard SET C5345 series (Article 576013 ).
One of the most accessible options from premium brands - frame wipers Bosch. ECO 53C and 45C (Articles and, respectively).

Second generation Kia Rio. JB. Debuted in the fourth quarter of 2005. Years of release: 2005 - 2011. Produced in 2 types of body: sedan and 5-door hatchback. Hatchback is completed with the rear brush.

Short. Fastening type - hook. Sizes of brushes 55 and 41 cm, rear - 35 cm. (Only for hatchback). Original Articles: Left / Right 98350-1G000. / 98360-2F000.
rear 98360-1G000.

Brush size and fastening type

Type of fastening of a wiper brushes -. The most common mount, which simplifies the selection of janitors to this car. The sizes of janitors for Kia Rio 2 are the following:

Frameless wipers at Kia Rio 2

Set of janitor Bosch. Aerotwin AR 552 S (Article -) - great choice, high-quality brushes of native size and fastening type. Good feedbackMagnificently cleansed in any weather (in winter and summer), durable and quiet.

You can also search the same brushes not a set, but separately. it Bosch Aerotwin. AR22U and AR16U (Articles: 3 397 008 537 and 3 397 006 824, respectively). Sometimes buying brushes can be saved a little.

Another a good option - Frameless brushes from DENSO FLAT. For Rio 2 (Articles: DFR-006 and DFR-001).

Valeo. It offers lubric brushes from its Silencio X-TRM UM653 and UM600 series (567946 + 567940).

SWF Visioflex (Articles 119855 and 119840) Another interesting option. The main feature of the brand is the presence of wear sensors. German quality represented silent work Brushes and efficient glass cleaning even in winter.

Hybrid wipers on the Rio of the 2nd Generation

Prefer hybrid brushes and want to find suitable option. Indeed, hybrid wipers have a frame, protected by a special casing, aerodynamic and protecting from water, dirt, ice and snow. Here are some finished sets of hybrid brushes with articles:

Brush DENSO. Hybrid ( DUR-055L + DU-040L) High-quality Japanese brushes, have an aerodynamic shape and differ in an increased life cycle.
Option of hybrid brushes from the American company TRICO. This series (Fit), articles HF550and HF400.
Winners Heyner Series Hybrid, Articles and

Do you prefer frame brushes? Then here are some options:

- 2-broth set Champion Aerovantage (AS5541 / B02) CO.
- Another set of brushes with spoiler Bosch. Twin Spoiler 552 S series (Article -).
- One of the most accessible options from famous brand - Frame brushes Bosch. ECO 55C and 40C (+) series.

Kia Rio rear window janitor

With a selection of wiper brushes for rear glass There are no problems in Kia Rio. A fairly large range of high-quality brushes is presented.

Let's start with the original brushes. Article brush 98360-1G000.
Replacement OT. Bosch. Series REAR Article H352.
Rear janitor Trico. ExactFit Rear (Article: EX350)

How to remove wipers at Kia Rio

The replacement of janitors does not represent special problems. The fastening type used is quite simple, common and understandable in the brush dismantling. If you have any questions to change the wipers, look this video. The process is no different.

More questions calls the rear brush. Want to figure out how to remove the rear janitor at Kia Rio, look at this video. In fact, there is nothing complicated.

Kia Rio 3 wipers

Third generation Kia Rio. UB. Debuted in 2011. Years of release: 2011 - 2017. Russia was sold in 2 types of body: sedan and 5-door hatchback. Hatchback is completed with the rear brush.

Brush size and fastening type

The type of fastening of the wiper brushes does not change the third generation already. The size of janitors for Kia Rio 3 is the following:

Deciding with the size and type of fastening, we turn directly to the selection of brushes.

Original wiper brushes

Original brushes used in Rio 3 differ depending on the configuration. Frame and frameless wipers are installed.

In the Comfort and Suite - set wipers are installed;
In the premium and prestige packs - frameless (this is in the terminology of Kia, although it is still) Aero Blade

Articles of original frame janitors:

983501R050.
983601R000.

Frameless original wipers:

Front Ower Wiper Brush - 983501R100.
Front wiper brush front - 983601R100.

Note that replacement original wipers, You can choose analogues with any type of design.

Frameless wipers at Kia Rio 3

Prefer frameless brushes. We have prepared several good options for you suitable for this car:

Two-broth set Bosch. Aerotwin AR 653 S (Article -). The brushes are distinguished by high quality, simple and rapid installation, are optimally suitable for replacing the original brushes installed on the conveyor. Provide high-quality glass cleaning in any weather.
Frameless brushes OT. DENSO.series Flat (Articles: DFR-010 and DFR-001).
One more brushes from the premium segment: Valeo. Silencio X-TRM UM702 and UM600 ( 567949 + 567940 ). Distinctive feature: Each brush has a wear sensor.
Budget option, kit Alca Super Flat. (Artikula 056000 and)

Hybrid wiper brushes on Rio 3 generation

Prefer hybrid brushes, look good replacement Original frameless bricks. Here are some recommendations:

Brush DENSO. on Rio 3 ( DUR-065L and DU-040L). These brushes are exactly what is supplied to the conveyor and sell as original frameless brushes. Not the cheapest, but high-quality, durable and well adjacent to the glass.
Champion Offers its series of hybrid janitors - Aerovantage Hybrid (Articles: AHL65 / B01 and AHL40 / B01).
Budget version, wipers HEYNER series "Hybrid", Articles and

Frame wiper brushes

Set of brushes Bosch. With spoiler: TWIN SPOILER 653 S () series.
Set Bosch. Without a spoiler (slightly cheaper): TWIN 653 (3397118324).
The most accessible piece frame brushes Bosch. ECO 65C and 40C (+).

For rear window

Let's start with the original brushes. Article of originally rear brush - 98850-1r000.
Replacement OT. Bosch. Series REAR Article H281.
Rear janitor Trico. ExactFit Rear (Article: EX280)

Fourth generation Kia Rio YB. Appeared in 2017.

Brush size and fastening type

The type of fastening of the wiper brushes has not changed - this is. The size of Kia Rio 4 janitor is the following:

Deciding with the size and type of fastening, we turn directly to the selection of brushes.

Frameless wipers

I want to start the review from the kit Bosch. Aerotwin AR 601 S (Article -). These are two native janitor of the size and fastening, so you guarantee simple and fast installation, are optimally suitable for replacing the original brushes. Provide high-quality glass cleaning in any weather.

The second option is a pair of individual brushes Bosch Aerotwin. (Articles AR24U and AR16U for driver and passenger, respectively). Made in Serbia and China. It is usually a bit cheaper than a set.

Another option - a pair of brushes SWF VisionExt (Article 119860 and 119840 for driver's and passenger, respectively). The wipers are distinguished by simplicity in the installation, high quality cleaning glass and an asymmetric spoiler.

A good option - a couple of frameless janitors DENSO. Series Flat (articles DFR-009 and DFR-001, respectively). Bricks S. interesting design, long service life and high quality glass cleaning.

Not bad option - a pair of individual brushes Champion EasyVision 600 mm series (Item ER60 / B01) and 400 mm (Item ER40 / B01).

), I. alternative option Set, without spoiler - Twin 601 (). Each set consists of a pair of brushes of the required size - 600 + 400 mm. The brushes of this series are reliable frame janitors from the famous manufacturer, production - Belgium.

Another good option - Paparate wipers Champion Aerovantage: (Article - A60 / B01and A41 / BT01, Size 600 mm and 400 mm, appropriate). These are the brushes of excellent quality with a fully metallic frame.

If you want to save, then pay attention to the most inexpensive framework wipers for polo from the famous brand - a couple of brushes Bosch. ECO: 60C () and 40C () series.

Read the same way

13.12.2017

To ensure stable visibility in any weather, you need to use good wipers. From this, it would seem, safety on the road depends on a minor element. Therefore, let's look at how to choose and install Kia Rio wipers.

Selection of janitors in size, type and manufacturer

In order to select the most appropriate option, it is necessary to take into account the following criteria:

The size;
Material making basic elements;
Type of fastening;
Cost;
Manufacturer.

The size of Rio janitors differs for different generations Machines, like the size and shape of windshield. For the first generation vehicles (year of release 2000-2005), it is necessary to use brushes with a length of 53 (from the driver) and 45 cm (from the passenger side). On the second generation (2005-2011) - 55 and 40 cm. For Kia Rio 3 (2011-2015) - driver - 65 cm, passenger - 40 cm. For Rio 4 and cars of the X-Line series (2015, 2016, 2017) Brushes go 60 and 40 cm.

Varieties of janitor

One of the most important criteria from which you need to repel when choosing is a variety. Different models Janitors have their own design features - they need to be compared with the car brand and operating conditions. Total distinguished 3 main varieties:

Frame. It is a kind of classic cleaner brushes, since it was just such a kind of appeared first. Consist only of 2 elements: fastening (most models are a simple hook) and rubber seal. The advantages of this species should include a relatively low price and high-strength of the frame (largely due to the simplicity of the design). The disadvantages include: too rapid pollution of elements, increased sensitivity to icing (due to the hinge type of compound), low aerodynamic indicators and corrosion. Frame wipers are often found at Kia Rio from the plant.

Frame wipers

Frameless. These wipers appeared in the late 80s and quite quickly won popularity. Such models consist of a rigid base (in most cases it is made of light metal or plastic and is covered with rubber to compensate for the friction force), rubber seal and replacement fastening. The advantages of this type include: elevated aerodynamic indicators, stability to icing (due to the absence of ball joints), smooth clamp, which gives uniform cleaning of glass, regardless of its design features and a reduced profile that does not interfere with the review. Among the minuses are worth noting: relatively high price, the inability to replace the cleaning tape (therefore, when it is excessive wear, it is necessary to fully change the design) and the need to pick up brushes to a specific brand vehicle. Frameless wipers Kia are usually put on expensive rio configuration.

Frameless design brushes

Hybrid. As can be seen from the name, it is a combination of the above varieties. Invented such wipers in Japan, and today they are the most practical option. The case in such structures is highlighted by increased strength and, as a result, the last operational period. Also worth noting both high aerodynamic characteristics. Due to the large weight of the design, such wipers cannot be installed on cars, which have windshield has a strong bend. Another drawback is an increased value. However, the price is more affected by the brand.

Hybrid brushes

There are also models of wipers with a specific specification. One of these - winter, which are designed for regions with a harsh climate. Their main feature - they can shoot a small crust of ice from glass. However, they have a significant drawback - very low aerodynamic properties.

In a separate type, it is worth turning on the rear wipers that are intended exclusively for the rear window of the vehicle. Still in stores you can find original wipers for specific models Auto. According to mine constructive features They do not always differ significantly from "ordinary", therefore, most likely, this is a banal trick of autocontracens who want to increase their income by selling consumables.

Review manufacturers

Another equally important factor in the choice of wiper brushes Rio is the manufacturer. Among the variety, we note a few most famous and popular:

ANCO CONTOUR. This is a Mexican manufacturer, which is quite exotic for this sphere. On official trials, this kit was estimated 3.8 (maximum score - 5). Among the disadvantages can be noted the lack of instructions in Russian, but if you at least once installed wipers - there will be no problems. The installation procedure is practically independent of the manufacturer. The advantages of this brand include the possibility of installing on the pin lever, which gives it the variability.

Bosch Aerotwin. Buyers noted not quite standard packaging, from which it is quite difficult to deliver wipers - high likely to damage the finger. This brand of janitors received 4.36 points. According to mine performance characteristics It is comparable to the previous option, but a higher estimate was obtained due to the fact that the price is almost 30% lower. Instructions in Russian are also not. It is also worth noting from drawbacks that as a result of the work of brushes on the glass in some places, stripes remain.

Heyner Hybrid. This is one of the most popular brands of hybrid janitors. MAIN TRANSFER - low price. There are 2 adapters for different types Levers. The installation is made without the backlash, while the wipers are fixed quite tight (the only nuance - you have to make a lot of effort). When working, there are very few uncleaned bands. Other Advantage - concise appearanceThanks to which the wipers are not striking. The minuses should include instructions only in German, although it is unlikely someone will be interested in the details that are written on the packaging. On official tests of this brand, 4.5 points were assigned, largely due to low cost.

Wiper wipers for Kia Rio of each generation

Let's deal with what wisps to choose and put on Rio. How to change the salon filter on kia Rio. Prize: comparison price and video installation. We will see all generations, fractionaries frameless, hybrid and frame brushes.

I prefer tested by time to manufacturers who deliver their products to assembly streams for new machines. Articles are indicated in brackets - thanks to them you can find the brushes required for you, since the world of auto parts is kept on the manufacturers' codes. Articles will help to purchase suitable specifically to your car janitors, without inadequate compromises in the form of several cm length or multi-adapters.

Kia Rio of the first generation

Years of release: 2000, 2001, 2002, 2003, 2004, 2005.
Length of the driver's wiper - 53 cm (21 inches).
The length of the passenger janitor is 45 cm (18 ").
Type of fastening - "hook".

Quick comparison for Kia Rio 1 generation

I offer short tips of janitors. Choose what is more important for you, and buy. Detailed description, video installation and price comparison - below.

Frameless wipers at Kia Rio I

Good brushes - set Bosch. Aerotwin Ar 531 S (Article - 3397118901 ). Well and quietly clean, with native fastening, durable. Produce them in Belgium. How to remove the rear bumper at Kia Rio. You can find out more about Bosch Aerovin.

Very good option - a pair of piece frameless American brushes Champion EasyVision Retrofit. ER53 / B01 and ER45 / B01. The proprietary feature of these glass wipers is great work in the rain. Durable, durable and low noise. Read more about Champion Izivizhen.

Still pay attention to piece wipers Valeo. First Flat Blade am vfam53 and VFAM45 ( 575796 575793 ). Valeo is a French manufacturer of reliable wipers.

Hybrid brushes on the 1st generation Rio

First of all I recommend wipers DENSO. Hybrid DUR-053L DUR-045L. Hybrid wipers combined the best of two technologies. Security in Kia Rio Pillow Kia Rio, at Kia Rio; how to remove and. From frame - simple, reliable and inexpensive design, from frameless - aerodynamicity and protection of the working surface with any weather. Read more about Dance brushes.

Framework wiper brushes on the first generation Rio

Pay attention to the set of brushes with spoiler Bosch. Twin Spoiler 531 S (3397118403).

Good option - Set of classic frame janitors Valeo. Compact Standard Set C5345 (576013).

More affordable option - Polish piece wipers Kamoka. (26525 26450).

Probably the most inexpensive branded version - piece frame brushes Bosch. ECO 53C and 45C (3397004671 3397004668).

Price comparison

To build a schedule, I took prices from one site - the famous online store of auto parts. This will reduce the effects of different pricing schemes.

As can be seen, the most expensive - the hybrid janits of Dance. The most affordable - Bosch Eco - four times cheaper.

Video settings of wipers on Kia Rio I

Wiper at Kia Rio Second Generation

Years of release: 2005, 2006, 2007, 2008, 2009, 2010, 2011.
Length of the driver's wiper - 56 cm (22 inches).
Type of fastening - "hook".

Quick comparison for Kia Rio 2nd generation

Read

Frameless wipers at Kia Rio II

Great option - set Bosch. Aerotwin Retrofit AR 552 S (Article - 3397118984 ). A set of frameless aerodynamic brushes with "native" fastening. Puzzled how to remove the rear lamp to replace the light bulb. Kia Rio 3; Kia Rio 2. Kia Rio. They produce them in Belgium, perfectly clean in any weather, long walk, quiet, smooth. Read more about Bosch Aermatov.

Good brushes - set Kamoka. (27E01). They are also with original mount, cheaper by Boshy, production - Poland. How to change the ball support on nissan Almera.. Learn more about wiper chimelines.

Valeo. It offers single brushes from their premium line: Silencio X-TRM Aftermarket UM653 and UM600 (567946 567940). Produce them in France. Valeo is known for supplies janitors to the conveyors of famous automakers, including for Audi and Mercedes. Read more about Valeo Silency Brushes.

Kia Rio Replacing the wiper rubber for 300r

In this video I will show how change rubber bands on wiper ( janitor). Everything is simple. for 2 rubber 300r.

Replacing rubber bands on Kia Rio QB wiper.

Because relatives wipers quite suit, and change They are invited, found a more budget decision - replacement rubber.

Hybrid brushes on Rio 2nd generation

Pay attention to piece brushes DENSO. Hybrid ( DUR-055L DU-040L). In hybrid janitors, the frame is protected by a special casing, aerodynamic and protecting water, dirt, ice and snow. Replacing windshield on Kia Rio 3 heated. As a rule, hybrid brushes are affordable frameless. Read more about the janitors of Dance Hybrid.

Frame wiper brushes on the second generation Rio

Great option - set Champion Aerovantage (AS5541 / B02).

Also suitable a set of brushes with spoiler Bosch. Twin Spoiler 552 S (3397118427). Spoiler tightly presses the janitor to the glass at high speed, with wind gusts and in turbulence.

Probably the most inexpensive option - piece frame brushes Bosch. ECO 55C and 40C (33970046723397004667).

Price comparison

The cost of all brushes is also taken from one site.

Frameless Valeo - the most expensive. Classic wipers up to five times cheaper.

Video settings of wipers at Kia Rio II

Look at the roller with the installation of janitors Champion:

Wiper brushes on Kia Rio Third Generation

Years of release: 2011, 2012, 2013, 2014, 2015, 2016, 2017.
Length of the driver's wiper - 66 cm (26 inches).
Passenger janitor's length - 41 cm (16 ").
Type of fastening - "hook".

Quick Comparison for Kia Rio 3rd Generation

Frameless wipers at Kia Rio III

Great option - set Bosch. Aerotwin Retrofit AR 653 S ( 3397118911 ). Belgian aerodynamic frameless brushes are well clean with any weather, serve for a long time. You can learn more about Bosch Aerwin.

Also pay attention to the wiper from the premium segment: Valeo. Silencio X-TRM AfterMarket UM702 and UM600 ( 567949 567940 ). They produce them in France, from useful features: there is a wear sensor on janitors (after installation, remove the protection with them). Read more about Valeo Valeo Silenis.

Good and more accessible option - Set of Polish brushes Kamoka. (27E24.). Read more about Kamok's janitor.

Hybrid brushes on Rio 3rd Generation

Japanese company DENSO. Releases hybrid wipers on Rio III. (DUR-065L DU-040L). Such brushes in the frame there are more clamping points than the classic options, and from above - a protective casing. Therefore, they are cheaper and work well in the winter. Read more about Dance Hybrid.

Champion Also offers Aerovantage Hybrid Hybrid Bricks ( AHL65 / B01 AHL40 / B01).

Frame wiper brushes on the third generation Rio

Set Bosch. With spoiler: Twin Spoiler 653 s (3397118325).

Set Bosh Without spoilers (a little cheaper): TWIN 653 (3397118324).

Piece frame brushes Bosch. ECO 65C and 40C (3397011402 3397004667).

Price comparison

Read

Let me remind you, the prices of all windscreter are taken from the same site.

As can be seen, the most expensive - hybrid wipers. Frameless is much cheaper. Battery at the specified temperature of the car Rio to Kia Rio 2015. It's amazing that the price of classic is different in three times.

Wiper brushes on Kia Rio Fourth Generation

Years of release: 2017, 2018.
The length of the driver's wiper is 60 cm (24 inches).
Passenger janitor's length - 40 cm (16 ").
Type of fastening - "hook".

Quick comparison for Kia Rio 4th generation

Frameless wipers at Kia Rio Fourth Generation

Great option - set Bosch. Aerotwin Retrofit AR 601 S (Article - 3397118907). This is a pair of brushes of the "native" size and fastening. Perfectly clean in any weather, quiet, smooth, long serve. Produce them in Belgium. Learn more about Bosh Aerwin.

Good option - a pair of piece DENSO. Flat 600 and 400 mm long (Article DFR-009 and DFR-001). Stylish design brushes, with a long service life and perfect glass cleaning. Produce them in France.

A good option - a pair of piece Champion EasyVision Retrofit 600 mm (Article ER60 / B01) and 400 mm (Item ER40 / B01). Owners club kia Sportyj.. Rear seats. (Kia Kia Rio how to remove. They are easily installed and clean the glass, especially in the rain. More about the champion Izivizhen.

Also pay attention to the set of janitors Kamoka. (Article 27E09). These brushes are produced in Poland. How to replace gums on the hybrid wipers Kia Rio 3. Quiet, reliable, inexpensive - compared with other European brands. More about the brushes of the kamok.

Hybrid brushes for Kia Rio IV

Excellent option - a couple of piece janitors DENSO. Hybrid (DUR-060L DU-040L). Just attached, it looks impressive and perfectly clean the glass at any time of the year. Learn more about Dance's hybrid brushes.

Framework Wipers for Rio 4th Generation

For those who prefer to ride with frame janitars, offer the following options:

set of janitors with spoiler Bosch. Twin Spoiler 601 S (3397010297),
set of classic frame brushes Bosch. TWIN 601 (3397118304),
piece Bosch. ECO 60C (3397004673) and 40c (3397004667) - the most affordable brand wipers.

Price comparison

The prices of all wipers are also taken from the same site.

From the graph, it can be seen that the most expensive - hybrid dance. Frameless wipers are generally more expensive. And for the price of hybrid brushes, you can buy 4 bush eco sets.

Video settings of wipers at Kia Rio III and IV

Look at the roller with the installation of frameless brushes Bosch:

P.S. At Kia Rio New, it is worth not to worry about the battery and in Kea declares in the new Kia Rio 48. Look at the best lamps of the neighbor and far Light At Kia Rio! No mechanism has the right to work forever, over time something breaks here. One of the probable breakdowns, with which the owner of at least some passenger car can occur, is a thermostat breakdown. Some of them turn on the issue of shifts to specials from the profile service, in this case the information on this Internet page by ...

As you know, the safety of movement in bad weather depends on the effectiveness of cleaning windshield. Indeed, with impairment of visibility, and even with bad weather conditions, the risk of emergency situations is increasing. Therefore, the quality of cleaning windshield should always be at the height. To do this, it is necessary that the brushes of wipers always remain good and efficient. Let's try to figure out how to replace the wipers on one of the popular models korean Auto industry - Kia Rio.

Procedure

So, as in many other cars, the Rio model is also possible to replace the wipers entirely, and only the rubber brush. In any case, the dismantling of the "janitor" from the wiper lever will be necessary. To do this, it is necessary to raise the lever in a vertical position. Next, you must click on the spring clamp and putting some efforts, shift the brush down by removing it from the lever hook. To remove a janitor with a lever, it is necessary to shift it up.
In order to remove the rubber part of the wiper, it is necessary to compress the pliers of both steel tires. At the same time, the procedure is necessary on the closed side of the brush. As a result, the rubber brush can be removed from the upper clamps. Next need rubber petal with steel tires Remove from the rest of the cleaner clamps.
To install a new rubber element, you need to mount a new rubber petal to one clip. Next requires West and two tires in rubber petal. At the same time, tire cuts should indicate rubber. In addition, the nozzles should be in the grooves. With the help of pliers, it is necessary to compress both tires and rubber in such a way that they come into another clamp. In this case, the clips should be in the grooves.
Next, you need to mount the janitor on the lever before clicking the spring clamp, as well as leak the lever to the workplace.

Similar articles: