Best oil for Ford Focus 2. Recommended motor oil for Ford Focus

Choose motor oil For Ford Focus 2, you can, knowing the year of its release, mileage and most importantly - the engine. You can pour both original and not original. There are 4 types of original and several dozen not original oils suitable for this car. To begin with, let's stop at the original:

1. Butter Ford Formula. F. 5W30. This is the most popular product for Ford Focus 2. It is recommended to fill it in everything gasoline engines With a mileage of not more than 100-150 thousand kilometers or with long-term riding when revolutions above 3000. Why only before that run? Because when large mileage It, as a rule, begins to evaporate. Motor starts to eat oil. This is due to a small high-temperature viscosity (30) and due to its composition - it is so-called hydrocracking (this is a simplified production technology).

By the way, look at the photo, here it is the original Ford oil formula 5W30. Remember it Article 15595E, this is a new article that is not yet faked.

2. Ford Formula S / SD 5W40 oil. This product is created to help for formula 5W30. It has a synthetic composition, does not fade at high loads and large mileage. Great choice For gasoline and diesel engines.

3.Ford Castrol 5W20.. It is not recommended to fill it in focus 2. This oil is designed specifically for ecobust engines (with turbine). Although official dealers And they pour it into focuses, there is no sense of any benefit - it costs 30% more expensive than the formula. Moreover, it forms a thinner protective oil film, because it is "energy saving". Definitely - such an oil is not needed!

4. Ford Castrol 5W30.. Special product for diesel engines of the new generation and for Ford Focus Art. This oil has tolerances for diesel and gasoline engines, but with a priority for diesel engine. Recommend it for Ford Focus 2 No sense - production Focus 2 ended (in 2011) a year before the production of this product (2012).

So - choice of editorial — oil Ford Formula 5W30 and 5W40. Focus on the Mouse - if the oil is 5W30, then go to 5W40. Now you know,

Motor oil for Ford Focus 2

Using the right lubricants can extend the engine life and save thousands of blood money on repair. Nevertheless, many motorists do not know which oil is needed for his car. After reading the post about the best motor oil of 2016, I decided to write about the oil for Ford Focus 2.

What oil pouring Ford Focus 2

Unambiguous answer is impossible. Now this number of oils is that even sellers are lost in their assortment. Most chief Criteria To select the oil, this should be 100% synthetics and the point here is not that this option is poured at the factory, but in its optimal viscosity and necessary additives. I will not write now about the advantages of synthetics, and immediately go to the answer to the question of the best oil for Ford Focus 2.

Ford Focus Oil 2

1. Mobil 1 Advanced Fuel Economy

This oil is specially created for those who want to improve the fuel economy of the gasoline engine. It has an unusually low viscosity and a unique combination of additives that give this synthetic oil great advantages compared to other manufacturers. You will feel particular pleasure at low temperatures, and super low viscosity increases the efficiency of the engine and improves fuel efficiency. According to the reviews of real people, the potential benefits ranged from 0.2 to 2.3% of fuel economy after transition to this oil, and its excellent thermal and oxidative stability Helps reduce the aging of the oil.

Good bonus for people who forget to change it.

Available in 0W-20 or 0W-30.

2. Castrol GTX Magnatec

This oil exists pretty for a long time And it has special molecules that protect the engine during startup. It will be good choice For those who drive a lot or use the start / stop function.

Available in 0W-20, 5W-20, 5W-30, 10W-30.

3. Valvoline Full Synthetic with Maxlife technologies

This oil is specifically designed for engines with mileage of more than 150,000 km and it has a special additive that helps prevent Jort oil. Antioxidants and the mixture is added to it. Improved leaching and preventing precipitation.

Valvoline Full Synthetic with Maxlife technologies has an additional "relaxed" anti-wear additive that helps prevent the premature engine wear, so it is very desirable to pour like oil immediately after 150 thousand. km.

Available in 0W-20, 5W-20, 5W-30 and 10W-30.

4. Pennzoil Platinum

With this synthetic oil you can participate in the warranty program from the manufacturer. This program covers 15 engine nodes, lasts 15 years or mileage of 800,000 km. If you use this oil and have all checks and records with a hundred, then you get under the insurance of Penniz.

This product is designed to keep the engine pistons up to 65% cleaner than the standards adopted. Customer feedback says that thanks to this synthetic mold, they drove 1000 km more than usual.

Available in 0W-20, 0W-40, 5W-20, 5W-30 and 10W-30.

5. Motul 8100 X-Clean

The last representative in this list will delight dieselists. This is 100% synthetic engine oil compatible with summary filtersSo it can be used in any car that is powered by a turbo diesel engine. It is specifically designed for vehicles with three-component catalytic neutralizers and will help save engines, protecting the environment.

This synthetic oil is suitable for gasoline engines and complies with EURO IV and EURO V standards.

Available in 5W-30 and 5W-40.

Rules for the replacement of motor oils for the Ford Focus of the second generation, as a rule, are reviewed towards reducing the mileage. Consequently, the optimal period between the shifts of lubrication in the motor will be 7-8 thousand km . Which oil is better to pour into the Ford focus engine and how much does it make sense to look for official Ford oil, let's figure it right now.

What oil is flooded in Ford Focus 2 at the factory

Mileage is more than 150,000 km. Oil consumption is practically no, within the normal range. Leone Castrol.

All cars Ford Focus After 2009, releases from the assembly line with a semi-synthetic, which is called FörD Formula F 5W-30 in the engine. This oil corresponds to the tolerances of FöRD WSS-M2C913-A and FORD WSS-M2C913-B.

Conveyor oil produces French ELF Corporation, while the manufacturer does not recommend changing the lubricant in the engine to the first plan maintenance. This is explained special characteristics of semi-synthetic oil promoting high-quality engine running.

Fake FORD Formula F 5W-30

The fake is distinguished by non-clear text and dimensional structure of the capacitance.

D0 2009.

Original oil.

For motors collected until 2009, when replacing the old lubricant on the Förd Formula F 5W-30, there is no need to use any special flushing and other liquids, the replacement technology also does not change and for topping in old engine with Ford Formula E 5W-30 You can use new oil formula F.

Actually quite Optional to use Ford Formula F 5W-30. It is enough that the selected oil responds to Ford Ford Ford WSS-M2C913-A and WSS-M2C913-B, especially since for obvious reasons the Ford does not produce any oils and uses third-party products.

Which oil is better to pour in the Ford Focus Engine 2

If there is no desire to experiment with the semi-synthetic, recommended by Ford, you can safely try to pour the oil of the American manufacturer MotoRCraft Full Synthetic 5W-30 S ARI SN.

This is high quality synthetic product, which the it has Ford tolerances . At the same time, the price of this oil is one and a half times lower than the promoted European brands.

And how much to pour?

Filling oils oil.

For a two-liter engine, the Ford Focus will need at least 4.5 liters.

Analogs

Petro-Canada 5W-30.

From European brands often use Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec 5W-30, but they are more expensive. There are more budget series - Motul 5W-30 913C. 2.5 thousand for 5 liters are asked for him.

Specifications

Following the specification, you can maximize the engine life.

In short, the main indicators of the use of motor oils for the Ford Focu of the second generation remains:

• factory Specifications Ford WSS-M2S913-A and Ford WSS-M2C913-in that must be designated on the sticker, or simply the recommendation of Ford;
• depending on climatic conditions, it is possible to use oils with viscosity characteristics by SAE 5W-30 and 5W-40 .

Oil filter

Oil filter Bosch 0 986 452 044 in the context. Made qualitatively.

When replacing the lubricant, an oil filter will be replaced.

For motors of 1.4 and 1.6 liters, the Ford filter will have a catalog number 1714387-1883037, but besides it, you can use analogs from Suzuki with a number in the catalog 16510-61ar0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, FRAM PH3614, and good reputation enjoy German filters MANN W 610/1.

conclusions

Therefore for any motors Ford. Focus Use the oil of any manufacturer's manufacturer with tolerances Ford. and the above-mentioned viscosity characteristics on SAE. Successful to all choices and a large motor resource!

Life time car Engine largely depends on the timely replacement of oil, its quality and compliance temperature regimes operation. There is a considerable effect on the engine quality of the engine, consider the video as not to buy a fake of corporate oil. Conducting an operation to replace oil in service centers. Pleasure expensive, dealers are offered for work. consumables And the works themselves are also not cheap. If there are even the most insignificant experience in repairing cars, this operation to replace oil on Ford Focus 2 can be carried out independently.

When oil replaced

In accordance with the terms of the manufacturer, the replacement of oil on Ford focus is carried out after 20 thousand mileage kilometers. A new car should be replaced by oil in 2 thousand after rubbing rubbing surfaces. The second replacement of oil in the new car is carried out at T-1 with a mileage of 20 thousand kilometers. It should be borne in mind that the manufacturer specified by the manufacturer This lubricant replacement interval is specified for normal working conditions. When operating the machine in severe conditions, the oil replacement should be carried out in 10-15 thousand. Trial operational conditions include:

• Extreme temperature conditions of operation;
• Permanent ride in metropolis and large cities;
• Long-term movement in the conditions of dusting (riding on dirt roads);
• Movement by increased speeds (above 120 km / h) more than 50% of the operation;
• More than 50% of the operation of riding with a trailer.

W. engine Ford. Focus 2 Butter during operation naturally decreases, its avgar occurs. Power plants with a volume of 1.8 and 2.0 liters are distinguished by a large operational filling of oil. Oil consumption, on top of these motors, can reach 200 ml per 1000 km of mileage, during operation with the load, this indicator can increase.

Oil selection Oil oil for use so as not to run into fake

The manufacturer recommends selecting the synthetic oil for Ford Focus 2 corresponding to the requirements of Ford WSS-M2C913-A and FORD WSS-M2C913-B. For these requirements, a large number of engine oils both premium class and existing more economical options are included. High-quality lubricants provide a light launch of the motor, the protection of its details from wear and, like a bonus, minor fuel economy. To this segment of expensive oils include brands of manufacturers Mobil, Shell, Castrol and Liqui Moly. The average segment can include Total, Elf, Agip and Araral companies. The ratio of price and quality is wisely combined in them. Budgetary oils include brands of Russian manufacturers whose quality is inferior to more eminent companies, but it is allowed to use as oil for Ford focus. Original Ford Oil Fully Synthetic Lubrication has a marking of Formula F. What kind of oil for Ford Focus 2 choose depends on the preference of the owner and its financial capabilities, but it should be borne in mind that there should not be somewhat different differences fake oil For formula F from the original. Examine attentively photos and videos so as not to buy a fake!

Pay attention to the labeling and quality of the canister

Selecting a filter element

Oil filter in the lubrication system of any car plays a very important role. In addition to cleaning the oil, it protects the system from wear products mechanical details, Warms of heat partially absorbs the noise produced by the engine. So what better filter, the better it specifications. The original oil filter has an article 1.4 / 1.6 - 1714387/1883037, but it can be replaced with analogue response characteristics and manufacturer requirements. The most popular analogues of the Oil Ford car oil filter are:

• Suzuki 16510-61ar0
• Bosch 0 986 452 019
• Bosch 0 986 452 044
• Fram PH3614.
• MANN W 610/1.

At the same time, the choice of filters to replace Ford oil is quite huge and determined by the preferences of the car owner and its financial condition. It should be borne in mind that it is not necessary to acquire at all cheap oil filters, the saying "miserly pays twice" no one has canceled. When buying a filter when replacing the engine in the engine, check it. What should be paid attention to:

• Lack of mechanical damage to the housing (dents, cracks, etc.);
• The integrity of the sealing rubber gasket;
• The lack of garbage and metal chips in the housing.

If you detect these flaws from the purchase, you should refuse and select another manufacturer.

Ford Focus Oil Replacement Procedure

To replace the oil, we will need an observation pit or a lift, as a last resort, the car can be signed using a jack. The last option is possible, but extremely laboriousness and dangerous. To carry out work:

• Capacity for spent oil with a volume of 5-6 liters;
• Set of a plumbing tool;
• Rag.

The replacement of oil in Ford Focus 2 is carried out on a heated engine, so work should be carried out with marginal caution to not get thermal burns. For the convenience of replacing oil replacement in the Ford engine, it is necessary to remove the protection of the crankcase when it is presented. Machine poured on watching pit and fixed with parking brake. The key of the rear fastener of protection is unscrewed by 17 mm, and the front mount screws are turned away with a 13 mm key. After that, it is worth carefully inspecting the plug hole. If there are heights of oil, or oil sediments should be changed.

Warm the engine to a temperature of 60 - 70 o C and the key to 13 weaken the plug of the drain hole. After that, completely turning it out, pre-substituting the container under merging oil. After that, we turn the cork of the fuzzy neck and turn the oil filter. It usually turns away from hand, but in some cases it may be necessary special key. With its absence, the filter housing can be pierced with a screwdriver and replete with the gate. We are waiting for the exhaust oil fully goes away, usually care
iT 8-10 minutes. Cleaning from dirt surface around the hole for draining and planting Oil filter.

Watch the plug in place, you should not make a lot of effort, you can disrupt the thread. Oil filter fill in fresh oil about ¾ and wrapping it into place by hand until the rotation stops. After that, we turn the filter about ¼ turn. Pour oil before top Tags Private and start the engine. Let him work for 2-3 minutes. The moach motor and give oil to drain within 4-5 minutes. After that, we check the oil on the PCU, its level should be between level risks. With low level it needs to be addressed. We close the cork of the oil-wave neck, set the protection of the pallet and the car is ready for operation.

For 20 years, Ford Focus has been retaining popularity, being an unpretentious and reliable car. To ensure reliable operation of its engine, it is necessary to use engine oil, approved and recommended by the plant, or to upload a lubricant that has similar parameters.

Not only work depends on the correctness of this choice. power plant, but also the duration of the operation of the aggregate. In our rating review presented the best oils most different manufacturers whose basic parameters are optimally suitable for each concrete Engine Ford Focus (in Russia, models with type motors Endura, Zetec-E, Duratec and Eco Boost (Fox) were the most common distribution.

Best Synthetic Oils for Engine Ford Focus

Synthetic has the properties necessary for high-quality lubricant modern engines, has a more reliable protection against oxidative processes and reacts little to high operating temperature inside the motor. Also an important feature of this category lubricants is a long operational period, during which all the stated oil characteristics are preserved.

5 LUKOIL GENESIS ARMORTECH A5B5 5W-30

Best price category
Country Russia
The average price: 1 421 rubles.
Rating (2019): 4.6

The oil was created on a high-quality synthetic basis, enhanced by a whole set of highly active modern additives Duramax, designed specifically for the line of synthetic lubricants of this brand. As a result, the products have good lubricating properties, an antioxidant effect, does not fade even with extreme loads.

Practically none of the reviews has critical estimates of this oil. There is an affordable cost, efficiency of the motor, the lack of neoplasms in the oil system. Moreover, the existing deposits in the motor gently and gradually dissolve, and, without falling into the sediment, can be removed upon the next replacement of lubrication. As a result, the efficiency of the motor increases, the level of vibration and noise during operation without load is reduced.

4 Xenum OEM-Line Ford 913-D 5W30

Multi-level motor protection from wear
Country: Belgium
The average price: 2 888 rub.
Rating (2019): 4.8

High quality oil, low content of sulfates, sulfur and phosphate inclusions, can be poured into diesel and gasoline engines car Ford. Focus with appropriate tolerance. Provides minimal wrencies of friction pairs, the content of carboxylic acid esters (Esters) retains the oil film at high temperature loads, increases the operational cycle.

The reviews there are more economical operation of the motor, an excellent detergent effect, the engine launch in winter even with severe frosts does not cause difficulties. The integrated selection of additives, which is part of the Xenum engine oil increases the resource not only internal combustion system, but also the exhaust system.

3 Mobil Super 3000 X1 Formula Fe 5W-30

Most popular oil. Best frost resistance
Country: Finland
Average price: 1 928 rub.
Rating (2019): 4.8

Worldwide Mobil motor oils have proven themselves as high-quality and reliable products. By purchasing this lubricant for the engine of its Ford Focus, the owners can get to the frank falsification, whose properties are able to spoil the engine even the tractor. In numerous reviews full of high marks performance characteristics Mobil Super, and only the lack of decency in some sellers spoils the overall picture.

In general, oil provides reliable operation of the OI, at any time of the year, winter is not something unusual for the product developed in Finland. It can be successfully used in the northern regions of the country, with more severe climatic conditions. In addition, the lubricant reliably protects the engine from overheating, does not form a naiga and stops the corrosion processes inside the engine. The integrated effect of this oil inevitably leads to an increase in the motor test.

2 Castrol Magnatec Professional E 5W-20

Good high-tech oil, providing a long service life of the engine with regular timely replacements. The molecular structure of lubrication provides the coating of parts, especially intensifying in places of high energies (points of contact of friction pairs) and preventing direct contact. Even at large intervals in the engine operation, the molecular structure holds the required amount of oil on the working surfaces and provides lubrication of parts until the oil pump will create a working pressure in the system.

Many owners of Ford Focus cars began to pour this oil from the first days of operation, and in their reviews there are full satisfaction with its properties and high-quality operation of the motor. In the process of use, there was no formation in the engine of any deposits and there is not even a hint of their appearance.

1 Ford Formula F 5W30

Original oil. Stable viscosity
Country: England
The average price: 1 785 rub.
Rating (2019): 4.9

Made specifically for automotive products Ford provides optimal conditions for the engine operation at any loads. The base lubrication base is obtained by the conventional hydrocracking method and thanks to the multi-stage cleaning system, it is not inferior in terms of the synthetic characteristics obtained from the gas. The surface of the parts inside the motor is covered with a sturdy oil film, which reduces friction, preventing premature wear of the engine.

In feedback owners of Ford. Focus is positively assessed by the stability of the viscosity of the oil, good fluidity with severe frosts, while improving the power of the motor and fuel economy. A set of high-quality additives ensures the stability of the oil structure - when high temperatures And long loads it does not dilute. Also has a good detergent effect without creating any deposits in the engine.

Best semi-synthetic oil for Ford focus

The semi-synthetic is actually a synthesized oil, diluted in different proportions of mineral. Temperature durability of such an oil is lower than that of clean synthetics, but the rest of the lubricant is perfectly coping with its task. Use looks more preferable in engines with great wear, but you can pour into modern motors. It should not be forgotten that the interval between replacements in this case will be less.

4 Comma X-Flow Type F 5W-30

Best price in the category. Increases the resource of the engine
Country: England
The average price: 1 610 rub.
Rating (2019): England

The peculiarity of this lubricant is the presence of an exclusive PCFINEUM package, which provides an excellent detergent and anti-corrosion effect. Thanks to the atomic inclusion of pH and Zn metals, the best slip indicators have been achieved, significantly reduced wear of parts during operation.

Ford Owners Focus characterize butter as reliable protection for the motor. The reviews there is an improvement in the DVS dynamics, noise reduction during engine operation without load, fuel economy. When operating in the northern regions, Comma X-Flow has proven itself, providing a light launch in frosts, exceeding the mark in -30 ° C.

3 Motul 6100 Save-Lite 5W20

High level of chemical stability
Country: France
The average price: 2 500 rubles.
Rating (2019): 4.8

Another oil with the recommendations of the Ford manufacturer deserves to become a member of our rating. There are only two lack of this product - relatively high price And the opportunity to acquire under the guise of Motul 6100 his miserable parody. The latter simply obliges the owners of Ford Focus to be more educated when choosing a seller.

As for the cost, then against the background of how the engine is "rejoicing" with this oil, and with each subsequent replacement increasing its resource, the price looks quite justified. Low sulphate ash content, satisfactory washing and oxidative effect prevent the burnout of the lubricant at any loads. Chemical stability in the conditions of high operating temperatures of modern MOS provides unsurpassed qualities and provides reliable protection of the engine nodes.

2 LIQUI MOLY SPECIAL TEC F 5W-30

High level of detergent properties. Increased interval between replacements
Country: Germany
The average price: 3,675 rubles.
Rating (2019): 4.8

Butter of this brand does not need advertising - it is one of the leaders in the lubricant market asking high level Quality. Despite the fact that the base of this lubricant was created on a mineral basis, the deep distillation technology (hydrocracking) made it possible to achieve quality comparable to clean synthetics.

Special TEC has tolerance for use in Ford brand cars. The high alkaline oil indicator (10.3) does not leave the chance for corrosion and other oxidative processes inside the engine, prevents the formation of sediments and nagar. There is an increased operational period and stability of work in high-energy modern motors, which is not entirely characteristic of lubricants of this category.

1 Ford Motorcraft SAE 5W30 Synthetic Blend

Best friction protection
Country: England
The average price: 1 729 rub.
Rating (2019): 4.9

Premium oil is created on a purest basis, which has passed a multi-step cleaning. Oil film is resistant to shift, oxidation and mechanical exposure. As a result, the phenomenal decline in friction, the increase in the power and resource of the engine. There is also a high level of detergent properties that support the purity of the lubricant system at the level of the new motor. To some extent, all these factors provide fuel economy.

Many owners constantly pour this oil into Ford Focus, especially since it is designed just for cars of this manufacturer. The lubricant has proven itself in perfectly different conditions Work. Available positive reviews From drivers who have been successfully used by Ford Motorcraft in the conditions of northern regions, rural areas (in off-road), as well as in ordinary urban conditions. Everywhere the oil copes well with the loads, retains its properties throughout the entire period of work.