Recommended motor oil for Mercedes-Benz E class. Original Mercedes Engine Oil Which Oil Pour Mercedes Engine

13.02.2021

17.11.2014

Mercedes. The name of this legendary car brand for all drivers is associated with various concepts. For some of this quality and reliability. For others - beauty and aesthetics. And for third, the symbol of wealth and stability. But most of the owners of these German cars will not argue with the fact that it is necessary to care for such a car with special care.

This postulate remains in force and when searching for a response to the question "What oil to fill in Mercedes?". After all, when selecting this most important lubricant, you should keep a lot of factors in my head, the main of which, no doubt, is the recommendation of the automaker itself. This value is called "tolerance" and most often found in the alphanumeric format. Concern Mercedes-Benz prefers to make out its recommendations in this form: "MB 229.1". To decipher these designations can only be a profile specialist, the usual owner is enough just to know the admission of lubricant for its car. Searching for such a designation follows in the service book, and then on the canisters with engine oil.

For many years of the existence of the Mercedes concern, many tolerances were created. We will tell about the most popular of them.

What oil to fill in Mercedes with the MB 228.1 tolerance?

This value indicates that the canister is all-season lubricant Super High Performance Diesel (SHPD) format for engines that operate under high loads.

Engine oil in Mercedes with MB 228.1 tolerance from Hammer:

What kind of oil to fill in Mercedes with the MB 228.3 tolerance?

In the canisters with such admission there is all-season engine oil for heavy-building engines and cargo engineering. This lubricant can be used in systems as without a turbocarddu, and with it. In various operating conditions, the timing of the replacement of this oil can fluctuate within 45 to 60,000 mileage kilometers.

Mercedes engine oil with MB 228.3 tolerance from Hammer:

What kind of oil to fill in Mercedes with the admission of MB 228.5?

MB 228.5 tolerance has Ultra High Performance Diesel (UHPD) format (UHPD), which are used under heavy loads and comply with Euro-1 and Euro-2 environmental standards. These lubricants have increased replacement time.

Mercedes engine oil with MB 228.5 tolerance from Hammer:

What oil to fill in Mercedes with the MB 29.1 tolerance?

MB 229.1 tolerance is made on motor oil canisters, which is intended for engines of cars that began to go from the conveyor in 1998 and finished produced in 2002. The manufacturer does not recommend pouring this lubricant in the model released after this period. In particular, we are talking about gasoline variants M28, M271, M275 and diesel OM648, OM647 and OM646.

Motor oil in Mercedes with MB 229.1 tolerance from Hammer:

What kind of oil to fill in Mercedes with the tolerance of MB 229.3?

Such admission has motor oils with extended substitution intervals. Sometimes this value can reach up to 30,000 mileage kilometers. These lubricants are especially recommended by the manufacturer for use in the passenger cars of the M100 and M200 series with gasoline engines, as well as in those OM600 output motors that use diesel fuel, with the exception of a series of models equipped with a sump filter.

Mercedes engine oil with MB 229.3 tolerance from Hammer:

What kind of oil to fill in Mercedes with the admission of MB 229.5?

MB 229.5 tolerance is denoted by those engine oils for Mercedes cars, which not only have increased replacement intervals (in some cases, up to 30 thousand mileage kilometers), but also fully comply with the most relevant environmental standards. Such oils allow the engine to work in more economical mode, which means it is to spend less fuel.

Motor oil in Mercedes with a tolerance MB 229.5 from the company Hammer:

The Mercedes concern places the highest requirements for lubricants and obliges leading manufacturers of motor oils to strictly perform them. After all, it is only so possible to be confident as a final product. That is why choose motor oil for Mercedes car brand needed, focusing on the manufacturer's admission, which can always be found in the service book or specialized literature.

Mercedes Benz divides oil for passenger cars into two main categories: oils for gasoline engines and diesel engines without particulate filters and oils for diesel engines with particulate filters. Each category of oil is divided into oils with different resources. All modern Mercedes engines have a system tracking intervice intervals - Assyst Plus System.

Insert:aSSYST Plus Systemit reads the deadlines of the upcoming, and informs the owner in advance, withdrawing information on the dashboard. The flexible system allows you to customize your service interval depending on the car operation market. The system takes into account the condition of the oil, some other factors and calculates the timing of the following. If you regularly, the data is entered into the system. Properties of oils themselves are adapted specifically for the right job.Assyst.Plus.

The oils approved by Mercedes Benz receive nominal tolerances, depending on the quality level and are entered into lists of officially approved products on the site http://bevo.mercedes-benz.com. Tolerances are given after oil tests under certain conditions. Also, tolerances are prescribed in the instructions on the car. For example: Instructions indicate that it is recommended to use MV oil 229.3 to standard replacement intervals (up to 20,000 km) and MV 229.5 to increased (MAX. 40 000 km). Under cars operated in Europe and diesel engines with the particulate filters, MV oils 229.31 and MV 229.51 are recommended. An additional unit in the oil tolerance indicates that the oil is adapted for a package of additives to use in diesel engines with a sump filter, Low SAPS oils. Adaptation consists in a reduced content of gray-phosphor additives, using a modified detergent package and reduced alkalinity. The admission of MV 229.5, on the contrary, is issued on high alkalinity oil (TBN more than 10), reduced evaporation and full package of additives. Oil MV 229.3 and MV 229.5 are recommended for gasoline engines and diesel engines without a particulate filter of passenger cars, operated both in Europe and in countries with unstable fuel quality.

It is quite natural that in Russia the most demanded tolerance - 229.5 for gasoline cars and 229.51 for diesel engines without particulate filters. Liqui Moly GmbH offers for gasoline engines operated in Russia, Mercedes Benz two engine oils, various viscosity. It and these oils are created on a NS synthetic base basis and on high-altitude packages of additives that provide the duration of operation and excellent engine cleanliness.

For diesel engines with the particulate filters, Liqui Moly specialists recommend using oils or (with improved low-temperature characteristics). These oils provide long-term proper operation of the diesel particulate filters and urea neutralization systems of Bluetec. Also, they are recommended for engines adapted to the use of liquefied and natural gas.

What is necessary to choose oil for Mercedes (diesel)? Currently, Mercedes-Benz cars are among the best in the world. These are very high-quality cars operating on gasoline and diesel engines. Their power is constantly growing, and the consumption of fuel and lubricants is steadily reduced. At the moment there is a rich selection of components and special funds, among which can be noted oil for Mercedes (diesel).

Currently, Mercedes cars are among the best in the world.

Difficulties with the choice of oil

Car owner will have to make a conscious choice between one or another.In many respects, the technical condition of the vehicle depends on the correctness of the decision. Any vehicle breakdown Mercedes will require a significant financial spending on the owner of a car.

Civilian products Mercedes accounts for only 13% of the company's production. The rest is military products. Therefore, cars of this brand are very high-tech and require a serious relationship to service. To pour into the engine any oil means a premature failure of rubbing surfaces, which will not be easy to replace. Cheap and accessible analogs to it are not found. Therefore, it is necessary to approach the choice of oil with knowledge of the case. But the problem is that car enthusiasts do not like to read written on the label. Motorists can be understood as labeling label rather reminiscent of some codes or ciphers. But to learn them is not so difficult. They define the two main characteristics of oils: viscosity and quality.

Back to the category

Viscosity and quality standard

The first thing to pay attention is viscosity. It should always be indicated on the label of the certified means. Now on sale the basic tone is asked all-season oils, which are very in demand by the consumer, so it will only be about them. Standard viscosity classification is indicated by labels 5W-40 or 10W-40. At first it is quite difficult to understand what they mean, but it is these figures that clearly define the classification and the specification of oil tools.

The first letter after the figure 5 means winter, from English Winter. This suggests that this product is great for winter work and has the appropriate level of viscosity. The first digit indicates how oil will pass through the lubrication system, distributing in it. The number 40 after hyphen indicates viscosity in the summer season. This refers to viscosity at temperatures up to 40ºC. If, for example, on the label instead of 40 costs 30, it means that the tool will optimally work only at 30ºC. If the temperature is higher, the operational properties of the oil will decrease.

Diesel oils belong to a highly profiled CF class. These are high-quality materials for use in forced diesel engines with turbocharging. It is such an oil that can approach Mercedes with a diesel engine.

Back to the category

Oils for diesel engines Mercedes

There are quite a lot of different variations of oils for diesel models of Mercedes Mark. All of them have the necessary level of admission. Some car enthusiasts may not fully understand what is tolerance of oil. In fact, automotive concerns always presented great requirements for manufacturers of lubricants.

Oils for diesel engines are properly chosen according to the level of admission, because any goods sold is repelled from the obtained standard. Among the oils for diesel engines, Daimler-Chrysler / Mercedes Benz, having tolerance and certification, are noted. They are represented by the following means:

All-season oil with tolerance MB 228.1. It is allowed for diesel engines, great for trucks with turbocharging. There is an increased interval between the oil replacement, which is compatible with elastomeric gaskets, has quality in priority, and then viscosity. It is sold well in Europe, and in Russia meets less often.
MB 228.3 tolerance. The lubricant intended for use throughout the calendar year has a multiply viscous property. Excellent will go both for passenger cars and for huge tractors with the presence of turbocharging or without it. The car can do without replacing the oil member of about 60 thousand kilometers.
MB 228.31. All-season oil for diesel vehicles equipped with particulate filters. Anti-Russian additives are introduced into the oil.
MB 228.5. High ECOLOGICAL PRODUCT, the replacement of which is carried out after 50,000 mileage mileage for light vehicles, and for heavy trucks - after 160 thousand kilometers.
MB 228.51. Year-round lubricant, the replacement of which is carried out in 45 thousand kilometers of the mileage. In it, according to EURO-4 standards, the lowered amount of phosphorus and sulfur. He is more expensive, but the cost of it pays off the good condition of the car.
MB 229.1. Motor oils specially released for cars that have come down from the conveyor until 2002. No new brands apply them not recommended. It can be used not only on the diesel engine, but also on gasoline. The product is in great demand both in Europe and in Russia.
MB 229.3. The lubricant works all year round, the average replacement period is suitable after 30 thousand mileage kilometers. Bad is combined with cars having a diesel filter. Because of this, the price is somewhat lower than, for example, the Euro-4 standard.
MB 229.31. Lubricant for passenger cars, minibuses equipped with particulate filters. In the composition of the liquid - the minimum amount of sulfate ash.
MB 229.5. Oils that meet enhanced environmental requirements. Suitable for passenger models, provide minimal fuel consumption. They can be used on gasoline engines. The minus is that the lubricant is badly combined with models with a diesel filter.
MB 229.51. It is used year-round, suitable for passenger cars, combined with those of them that have a slicing filter, has less ash.

The above tolerances are only a small part of the sale of money. There are a lot of them, and they have the most diverse properties that can individually approach any car Mercedes Mark, working on diesel fuel.

Big delusion is the opinion that it is believed that these indicators can be taken and measured. After all, the numbers in question are a collective indicator. Existing classes are attributed to oil only after its comprehensive study and measurement of all parameters and viscosity definition properties. Next, you need to choose a quality standard. The API is the highest quality mark, it is divided, in turn, into 2 categories for purpose: for gasoline and diesel engines. Each and these categories is divided into classes. These classes determine the final purpose and specification of the goods. This classification needs to be strictly adhere to when purchasing lubricating fluid.

The manufacturer is interested in the life of its production to be no less than the stated. Provides its proper operation, which determines the choice of the oil of the required quality so that its properties correspond to the requirements of individual models of cars. The tolerance is a specific quality standard for manufactured and consumed by engine oil, which meets all the necessary parameters that are considered a mandatory car manufacturer.

Thus, the key criterion during the choice of oil product for the car should be tolerance.

After reading the tolerance code, you can immediately find out all the properties of this product. The tolerance must be specified on the label of the fund sold. If it is not, then the quality of oil without admission can be questioned. How can I know his appointment?

The right choice of lubricant is as important as the choice of high-quality fuel. If it is incorrect, it will lead to a technical malfunction of the car, dear repair and stress. That is why only the highest quality lubricant having the necessary tolerance must be purchased.

The high-quality composition of the engine oil affects the resource, efficiency and the overall operation of the engine. Therefore, during the selection of lubricants, it is worth considering not only its base (synthetic, semi-synthetic, mineral), but also a group, class, as well as the viscosity of the liquid. This article describes the characteristics of the recommended engine oil for Mercedes-Benz E class.

MERCEDES-BENZ E W124 S124 A124 C124 1984-1997

Model 1996 release

Gasoline Automotors

Manufacturer Mercedes Benz E Class for Lubricating systems of engines 102 It is recommended to use lubricants that meet the requirements:

machine class G4 by CCMC classification or SG on API standards;
viscosity 10W-40 or 10W-50;
the refueling capacity is 5.5 liters.

For lubricating systems of motors 103 and 104 cars Mercedes Benz E class According to the operating instructions for the auto, it is recommended to fill lubricants that have a viscosity of 15W-40 or 15W-50. The container of the lubricant system is 7.0 liters. The difference between the maximum and minimum mark on the dipstice is 1.5 liters. Replacement of the car by the factory - the manufacturer of the car is recommended to perform every 10 thousand km of run or 2 times a year. An exemplary amount of lubricant, which will be needed when replacing, taking into account the oil filter is 6.0 liters (including the oil volume in the filter 1.0 l.).

The volume of engine oil required when replaced by other types of motors, taking into account the oil filter is:

5.8 liters. for model 200;
5.9 liters, if model 230;
6.5 l for model 260 or 300;
7.5 L. Model 280 or 320.

Diesel power units

It is recommended to fill in Mercedes Benz E class of automation that corresponds to the type of CD oil and having a viscosity of 15W-40 or 15W-50. The frequency of the change of lubricating fluid is 10 thousand km. The difference between the maximum mark and the minimum on the diploma is 1.5 liters. The volume of engine oil required when replaced by oil filter is equal to:

6.5 l if model 200;
8.0 l for 250 or 300 turbocharged models;
7.0 l if model 250 or 300 without turbocharging;

Mercedes-Benz E W210 S210 1995-2003

Model 2001 release

Gasoline Automotors

according to CCMC-G4, CCMC-G5;
according to the classification API-type SG oil;
in accordance with ACEA A2-96 or ACEA A3-96.

Selection of viscosity is performed on the basis of the temperature of the region in which the machine will be operated. All-season cars with a viscosity of 15W-40 or 10W-40 are used in regions with a large temperature range. For regions with a too low or high temperature indicator, it is worth selecting special cars designed for the summer or for the winter. For the selection of lubricants for too hot or cold regions, it is worth contacting the Mercedes dealer Benz.

The volume of the engine fluid required when replacing, taking into account the oil filter is:

5.5 l for the E200 model;
8.0 l for models E 240, E 280, E 430, E 320, E 280 4Matic, E 320 4Matic;
8, 5 l in the case of E 430 4Matic;
7.5 l If equipped E 55 AMG.

Diesel engines

Manufacturer Mercedes-Benz E Class for its car recommends auto-salas that meet the requirements of the SSMS-D4, CCMC-D5 and SSMS-PD2. In the absence of said motor fluids, the use of lubricants corresponding to API CE or CF-4 is allowed. The selection of viscosity is performed taking into account the temperature for the bot machine according to the scheme 1.

Scheme 1. The dependence of the viscosity indicator from the temperature of the region in which the car will be operated.

Decoding scheme 1:

SAE 30 is poured in the temperature range from +25 0 s to + 15 0 s;
SAE 40 is used if the temperature is higher than +25 0 s;
5W-30 pour if the temperature is below +5 0 s;
5W-30 CCMC-G5 is poured at a temperature of less than +30 0 s;
5W-40, 5W-50 is suitable for the temperature range from +30 0 C (or more) to -30 0 s (or less);
10W-30 pour in temperature from + 10 0 s to -20 0 s;
10W-30 CCMC-G5 is used at temperature conditions +30 0 C to -20 0 s;
10W-40, 10W-50, 10W-60 are used if the temperature is over -20 0 s;
15W-40, 15W-50 are used if the temperature is above -15 0 C;
20W-40, 20W-50 are used if the temperature is above -5 0 C.

Short-term temperature changes When choosing viscosity of the car are not taken into account. Also in the manual manufacturer indicates that the maximum allowable lubrication consumption is 1.5 l / 1 thousand km.

The volume of lubricant required when replaced by oil filter is:

6.0 l for Motors E 200 CDI, E 220 CDI
7.0 l for E 270 CDI engines;
7.5 liters for E 320 CDI engines.

Mercedes-Benz E W211 S211 2002-2009

Model 2008 release

Manufacturer Mercedes-Benz E Class recommends using motor fluids that meet certain requirements. On the compliance of the oil, the necessary standards indicate the tolerances that are applied to the container with lubricant material. For example, an inscription will be present on the canister with oil: "admitted according to the MB 229.1, 229.3 or 229.5.

Gasoline Automotors

Scheme 2. The dependence of the viscosity characteristics of the oil from the air temperature overboard the machine.

Decoding scheme 2:

0W-30, 5W-30 is suitable for the temperature range from +30 0 C (or more) to -25 0 C (or less), and in similar temperature conditions, 0W-40, 5W-40 or 5W-50 is allowed;
10W-30, 10W-40, 10W-50 or 10W-60 are used if the temperature is more -20 0 s;
15W-40, 15W-50 are used with an indicator of the thermometer above -15 0 C;
20W-40, 20W-50 are used with an indicator of the thermometer Over -5 0 C.

The volume of the car, which will be needed when replacing, taking into account the change of oil filter is:

8, 0 l for engines E 240, E 320;
7.5 l in case of 500;
8.5 l for E 55 AMG engines.

Diesel engines

Recommended motor oil for Mercedes-Benz E class must comply with tolerances 229.3 or 229.5. The selection of viscosity is performed according to the scheme 2. The volume of engine oil required when replacing the oil filter is equal to:

6.5 l for Motors E 200 CDI and E 270 CDI;
7.5 liters for engines E 320 CDI.

Mercedes-Benz E W212 S212 2009-2017 release

2013 release model

To ensure optimal engine operation, the manufacturer recommends applying lubricants corresponding to certain tolerances. You can get acquainted with the list of recommended motor fluids on the official website http://bevo.mercedes-benz.com.

Gasoline Automotors

3, 229.5, 229.51 for equipment E 200 Blueefficiency or E 250 Blueefficiency;
3, 229.5 In the case of E 300 models, E 300 Blueefficientcy, E 300 4Matic Blueefficiency, E 350 Blueefficiency, E 350 4Matic Blueefficiency;
5 If you consider E 500 BlueEfficiency, E 500 4Matic BlueEfficiency, E 63 AMG.

In the absence of the above-mentioned car, one-time topping (no more than 1.0) engine fluids with tolerances 229.1, 229.3, or responding to ACEA A3 standards, is allowed.

Selection of the viscosity characteristics of the motor car are made according to Scheme 3.

Scheme 3. The dependence of the viscosity of the engine fluid on the ambient temperature.

According to Scheme 3 for the temperature range from +30 0 C (or more) to -25 0 c (and less), 0W-30, 0W-40 lubricants are used. At temperatures above -25 0 C poured 5W-30, 5W-40 or 5W-50 cars. With an indicator of the thermometer above-20 0 C, 10W-30, 10W-40 or 10W-50, 10W-60 are used. If the temperature is more -15 0 s puffed lubricants 15W-30, 15W-40, 15W-50. Motor liquids 20W-40 or 20W-50 pour at temperatures above -5 0 C. Consider, for AMG machines, you can only use oils with a viscosity of SAE 0W -40 or SAE 5W -40.

Diesel Automotives

According to a manual, for models with particulate filter E 200 CDI BlueEFFICIENCY, E 220 CDI BlueEFFICIENCY, E 250 CDI BlueEFFICIENCY, E 250 CDI 4MATIC BlueEFFICIENCY, E 300 CDI BlueEFFICIENCY, E 350 CDI BlueEFFICIENCY, E 350 CDI 4MATIC BlueEFFICIENCY, E 350 BlueTEC recommended to fill Motor oils having tolerances 228.51, 229.31, 229.51.

In the absence of the above oils, a one-time topping (no more than 1 l) of motor fluids meets the requirements 229.1, 229.3, 229.5 or ACEA C3 is allowed. The selection of the viscosity of the engine fluid is made according to Scheme 3, taking into account the temperature overboard the machine.

Filling tanks

The volume of the machine required when replacing is:

5.5 liters for models E 200 BlueEfficiency, E 250 BlueEfficiency;
6.5 liters for E 200 CDI BlueEfficiency, E 220 CDI BlueEfficiency, E 250 CDI BlueEfficiency, E 250 CDI 4Matic Blueefficiency, E 300 Blueefficiency, E 300 4Matic Blueefficiency, E 350 Blueefficiency, E 350 4Matic Blueefficientcy
8.0 L. If the power units E 300 CDI BlueEfficiency, E 350 CDI BlueEfficiency, E 350 CDI 4Matic Blueefficiency, E 350 Bluetec, E 300, E 500 Blueefficiency, E 500 4Matic Blueefficiency.
8.5 l for E 63 AMG motors with an external oil radiator.

MERCEDES-BENZ E W213 S213 since 2016 release

Model 2016 release

Recommended motor oil for Mercedes-Benz E Class providing high automotive efficiency and its long-lasting operation must comply with certain tolerances. You can get acquainted with the list of original cars that meet the requirements of the MB on the official website http://bevo.mercedes-benz.com.

Gasoline power units

According to the operating instructions for the car Mercedes Benz E class, you need to use lubricants with tolerances 229.5. For AMG machines, it is permissible to fill only lubricants with a viscosity of SAE 0W-40 or SAE 5W-40.

In emergency situations, one-time topping (no more than 1l) engine oils with MB-Freigabe characteristics is allowed (Mercedes-Benz tolerance) 229.1, 229.3 or ACEA A3 specification. Oil viscosity selection is made according to Scheme 3, depending on the temperature of the region in which the machine will be operated.

Diesel Automotives

Based on the Mercedes-Benz E manual class for models E 350 CDI, it is necessary to use oils with tolerances 228.51, 229.31, 229.51. In the case of other configurations of diesel cars, autosals are used, having tolerances 228.51, 229.31, 229.51, 229.52. In the absence of the above lubricants, a one-time topping is allowed (no more than 1 liter) oil with MB-Freigabe characteristics (Mercedes-Benz tolerance) 229.1, 229.3, 229.5 or ACEA C3 specification.

The viscosity of the engine oil is selected according to Scheme 3, taking into account the temperature regime by side of the car.

Filling tanks

The volume of engine oil required when replaced is:

6.1 liters for engine E 180;
6.3 l if force aggregates E 200, E 250;
8.0 l for Motors E 300 Bluetec, E 350 CDI, E 350 Bluetec, E 350 Bluetec 4Matic, E 500, E 500 4Matic;
8.5 l if AMG machine;
6.5 liters for other models of cars.

Conclusion

Manufacturer In the instruction manual of the machine indicates the parameters of the recommended engine oil for Mercedes-Benz E class. And also describes lubricants that can be used for the topping. Pay attention, after the topping, coming to the nearest service station, it is worthwhile to replace the car, as continuous riding on mixed oil is prohibited. Also, the use of various additives is also unacceptable, their use can lead to an automotor entry.

Engine - car heart. It is not randomly called it. As with any mechanism, careful attitude and care is required to serve for many years without breakdowns. And the main component, regardless, budget or premium car, allowing the motor to work without failures, is the engine oil.

Working parts come into contact, which leads to their abrasion. To avoid this, the engine oil is used. But these are not all functions that allow you to save the motor in a working condition and influence the duration of work.

Cooling is performed, especially concerns the lower part, under the piston where high temperature is created.

What characteristics should Mercedes motor oil? Consider items:

First. Excellent lubricant between moving parts.
Second. Heat removal and thermal stability. It is necessary to prevent OVC overheating.
The third. Special characteristics that make it possible to keep the cleanliness of the engine.
Fourth. Maintaining seals between the cylinder and the piston in order not to lose pressure and prevent the passage of exhaust gases into the oil pan.
Fifth. Properties that allow the engine under load.

It is not by chance that the Mercedes oil replacement is the most important stage of car service. Wear particles, combustion products during the engine operation always in motion. Replacement occurs - they are removed.

Recommended replacement intervals in car brands are different, but the more often the replacement is made, the longer the engine will last. Recommend every 10-15 thousand. km, but this is a long time, it is better to reduce it twice and change every 5-7 thousand km.

In 2011, Mercedes decided to choose Mercedes engine oil for their cars. The release began under the Mercedes brand, which became the right marketing move and the solution to the choice of many owners of the German brand.

World Motor Oil Production Companies: Castrol, Shell, Lukoil and others offer their products that are subsequently marked with Mercedes. Mercedes engine oil is offered several species for certain types of engines with its admission.

Tolerances 229.5 and 229.51.

Often on tanks you can see the numbers 229.5 and 229.51. What do they mean? This is the main indicator of the original oils of Mercedes - tolerance. It shows that it is allowed to use this type of oil in the engines of the German brand. Marking means that it is created according to modern technologies and is suitable for Mercedes motors only.

Getting tolerance is a complex process. And in order to specify the necessary tolerance on the canister label, you should receive a certificate. First, conduct tests. The second, in special laboratories analyze the composition, and only after all the procedures and the receipt of the certificate, you can specify the necessary tolerance.

The first number: for gasoline and diesel engines. Second, for diesel engines with a diesel filter. There is also a newest tolerance 229.52, created for diesel engines.

There are old tolerances: 229.1 and 229.3. And if the first tolerance has long been outdated. The use in modern engines is unacceptable, then 229.3 has characteristics that allow the use of oil in many Mercedes motors.

Need to remember, use years of release. Mercedes oil with admission 229.1 for motors released until 2002, and 229.3 - after 2002.

But there is the reason why the choice between 229.3 and 229.5 will fall on the side of the latter - the price. The first slightly cheaper, but in its characteristics differs from modern analogues. It is worth paying a little and use, suitable for a specific type of engine, regardless of viscosity: 5W30 or 5W40.

Choosing between 229.5 and 229.51?

Such a question may arise before drivers, because the oil with a tolerance of 229.5 has deterges, and with a 229.51 - sulfur content contributing to the formation of solid particles.

Therefore, each personally makes a decision. A reasonable choice will find out what Mercedes company offers for a particular engine. If there are both tolerances, then use 229.5, no dependence, gasoline or diesel engine installed in the car.

The right decision is to contact the official dealer, which will give recommendations. In this case, you can be sure that you will advise the original products.

How not to acquire a fake?

To talk about how a fake can harm the car engine, it makes no sense because it becomes clear that the motor can be spoiled. And these are expensive repairs up to the replacement of the engine.

The first and important rule, as mentioned above, to buy from the official dealer. 100% guarantee that the oil does not turn out to be a fake.

The second, on the container label, the standards, classes and tolerances are indicated. ACEA A3 / B4 standard and tolerance 229.5 are required. It will not be superfluous to find out the manufacturer's code, for example, number A001989530312.

Analogs .

Admission - 229.5. Complies with the European Standard ACEA A3 / B4.

Total Quartz 9000 Energy 0W30 - Synthetic recommends Mercedes to use in your cars. Effectively protects from the wear of parts.

Advantages of Total Quartz 9000:

It makes it easier to get a car in winter.
Minimum avgar.
Does not allow deposits, regardless of ride style.

The same, but with a greater viscosity of 0W40 and additional additives retains fluidity. Which allows you to quickly run the engine at low temperature conditions.

Specially designed Mercedes-Benz PKW-Synthetic Motorenol MB 229.5 is ideal for German cars.

Advantages of Mercedes Motor Oil (I)

Not by chance, Mercedes company creates oil under its brand. To be more accurate, global manufacturers make oils that meet the technical requirements of Mercedes-Benz.

The tests have shown that the oil developed by Mercedes engines compared to others has a high lubricant and allows the engine better. The motor wear is reduced and the gasoline consumption is reduced, which, with long-term operation of the car, will be a big plus.

Motor Mercedes oil, created on the basis of complex oil synthesis. This contributes to the creation of perfect viscosity, regardless of temperature range. What allows the engine to work at any time of the year in all, even severe climate conditions.

Special additives are being added to the basis, contributing to the protection of the wear of the driving parts of the engine and protect the insides from corrosion exposure. To allow other people's additives is practically a crime of the manufacturer. Also, how to change the composition to reduce the price.

The main indicator of quality is the correct ratio of additives, the impact of which contributes to the proper operation of the motor and the preservation of all its parts in excellent condition. Yes, and the cost of such goods is quite affordable.

Mercedes-Benz is constantly improving its scientific development, including in the field of lubricants. It is not surprising to know the recipe for the preparation of such an oil - the mystery behind the seven castles. Refers to secret developments. This is the difference between the original and non-original oil. What class and how many liters in the canister are already secondary indicators.

Benefits of Mercedes Motor Oil (II)

Each owner of the Mercedes car understands that it is better to use the original products, especially for this brand. Neoriginal do not possess special additives that use in production, which does not guarantee the reliable operation of the engine. It is possible to reduce the resource of the motor, unstable work is possible. Repair Mercedes engines - no cheap pleasure.

To be confident in the work should heed to a banal, but important advice - use only the original Mercedes engine oil. Above it becomes clear of the difference from other types of engine oils.

Summing up, it should be remembered that in addition to the maintenance of the Mercedes brand car, the engine can be replaced in the engine - the main process that contributes to long-term operation of the motor. And the correct selection of oil, allows not afraid that technical problems will occur with the engine. The owner has two ways: change it on their own or contact the official dealer, which, if you need to select the appropriate type of Mercedes diesel or gasoline oil. Synthetic or semi-synthetic. There is a third option, for the first time to come to the dealer to find out which it is better to use, and the next time to buy and replace themselves.

The use of original products will provide a guarantee that the engine will not happen to the technical problems associated with lubricating details. The manufacturer has already taken care so that the original oil allows the engine to work. Like a clock and not deliver the host of the owner of the car. Added special additives create "perfect" Mercedes oil. And it's not by chance that it grows the Mercedes-Benz brand emblem - the global manufacturer of premium cars. The owner understands that reliability and quality is the two main characteristics of this brand, and it will not allow. To the most important product in the face of motor oil, could harm the engine. Real reviews of Mercedes Marki owners on the Internet only confirm it.

Video on YouTube:

Similar articles: