Motor oil for Skoda Octavia. Which oil is better pouring? Motor oil for Skoda Octavia 1.8 turbo

06.01.2021

Frequently often owners of Skoda Octavia A5 and A7 are asked about the periodicity of the replacement of motor oil in their car, as well as how much and what is it better to pour. Also owners of these cars concerns oil consumption during operation. In this article, we will respond to all questions regarding the self-replacement of oil, as well as its choice and affect the repair of the level sensor in the engine crankcase.

To start a little about motors

Cars Skoda Octavia A5 and A7 were completed with Motors of 1.4, 1.6 and 1.8 liters, injection systems on these engines were called MPI and TSI. Reliability and simplicity in service have a positively affected on the reviews of the owners. Repair of these aggregates becomes necessary as much as 300 thousand mileage kilometers, and this is a considerable resource.
Some characteristics:

Motor Skoda Octavia A7 1.4 TSI has turbo reducing and has a capacity of 140 hp
Motor Skoda Octavia A7 1.6 MPI is equipped with point injection, and its power is 110 hp
On the model Skoda Octavia A5, the engine was installed 1.8 TSI engine, with the help of a turbine, this motor has a capacity of 152 hp.
The same power unit was established on the A7 tour and has a greater power - 180 hp.

Oil selection Skoda Octavia

As we know, the frequency of changing the oil is 10 thousand kilometers of run, only at such intervals the motor of your Skoda Octavia A7 tour will serve you many kilometers of the path without breakdowns. Of course, such reliability will be achieved in the case of using original solutions for Skoda Octavia.

Skoda Octavia 1.6 and 1.8 TSI motors are very picky to the quality of the oil to answer the question which oil must be poured, we present some tolerances regulated by the manufacturer.

VW 504.
VW 502.

It is these tolerances that must be indicated on the canister label with a new liquid. When using high-quality liquids, the Skoda Octavia 1.6 - 110 forces and 1.8 motors will serve not one hundred thousand kilometers of run.

If pouring low-quality materials, lubrication consumption can increase significantly.

So that you know which oil is better pouring, we will reply - original. It is the original grease that it is impossible to better fulfill its functions, thereby protects the parts of the motor from increased wear.

Getting to work

To start work, we will need a certain set of tools, which consists of a set of screwdrivers, as well as end heads for 13 and 17 millimeters and ratchets.

To carry out such work it is necessary to use a viewing pit or a car lift.
Unscrew the oil filter using a special puller, then install a new filter and tighten it.
Remove the plastic protection of the engine crankcase, after which you unscrew the drain plug and wait until the whole liquid strokes into the container.

This work is desirable to carry out on a heated motor, since the viscosity of the lubricating fluid decreases, thereby increasing its fluidity.

Tighten the drain plug, then mounted the ceter protection in place.
Fall fresh liquid, observing the level. Check the level thoroughly and restrict the volume of the oil fill. To know how much pouring, you need to use probe. This probe has divisions, on many cars the distance between the minimum and the maximum is equal to one liter.
Tighten the filler plug, then run the power unit and make sure that the lubrication system pressure lamp went out.
Mustle the motor and check the level again using the dipstick. If necessary, make a liquid plot with small portions. Using this method, you will better control the volume of fluid flexible, and later you will know how much lubricant is needed by your motor.
If the fluid is at a minimum mark, it is necessary to pour about 400 milliliters, it is necessary to do this in several techniques, filling the entire volume.

As soon as the level reached the mark between the minimum and the maximum, the liquid should be discontinued and this work can be considered completed.

Attention! If the motor of your car eats oil, you need to set the level at the maximum mark, after which it is carefully monitored.

Solving problems with leakage and lubrication consumption.

If you find that the motor of your car is eating lubricant, and the level decreases, it is necessary to inspect the unit for leaks. Perhaps the volume sensor has become unusable and it must be replaced.

Repair of the level sensor is not possible due to its design features. On Motors A7 1.4, 140 forces, this malfunction is found quite often. Therefore, the owners of 140 strong engines often complain that the engine eats lubricant, approximately 400 milliliters per 1000 km of way. Do not get upset, you need to immediately inspect the Carter for the level sensor leakage, most likely the problem is in it.

In general, the Skoda Octavia A7 1.4 TSI motors - 140 forces have tolerance from the plant for lubrication consumption in the amount of 200-400 milliliters per 1000 kilometers of run. This consumption depends on the style of a particular driver ride, as well as the operating conditions of this car.

To reduce the consumption of lubricant and fuel, you should not expose the Motors A7 1.4 TSI - 140 forces to the extensive loads. Moving smoothly without sharp accelerations, you not only reduce the lubrication consumption, but also save your car from increased wear of rubbing parts.

Repair of the sensor

On Skoda Octavia A7 1.4 TSI engines - 140 forces, as well as 1.6 MPI - 110 forces, the level sensor in case of damage is subject to replacement. The same picture is observed at a 1.8 liter unit. Of course, there are some cases in which the repair makes sense.

To change this sensor, it is necessary to pour all the lubricant from the engine crankcase until it follows it completely, after which disconnecting the pin connector, unscrew the three bolts of fixing this item in the desired position. After removing the sensor, it is necessary to thoroughly clean the surface of the fit, then install a new part and make it fasteners.

After installing the new part, it is necessary to replenish the amount of lubrication.

This procedure is better combined with the planned replacement of lubricant in the engine. After replacing this element on Skoda Octavia A7 1.4 TSI - 140 forces, as well as 1.6 MPI - 110 forces, the lubrication consumption will significantly decrease significantly, and you do not have to constantly pour a decreasing lubricant.

In case the motor eats lubrication after replacing this spare part, most likely, you will have to repair the entire unit. Perhaps the lubricant eats precisely because of the increased wear of the piston rings. Also, the engine eats lubrication after overheating or eats due to the failure of the valve oil seals. All these reasons can be simultaneously, and then the power unit eats lubrication in huge quantities. The integrated repair of the power unit is comparable to the total value of the entire car, and this is a considerable expense of finance.

Conclusion

How do we know the Skoda Octavia A7 and A5 motors? Such as 1.4,1.6,1.8? Possess a capacity of 110 to 140 horsepower, are quite reliable aggregates. If you make proper service and regularly, these engines are able to retrieve without repairing 300,000 mileage kilometers.
To know which lubricant is better pouring into the motor, you need to purchase original solutions and guided the admission of the manufacturer's plant. In this case, the resource of your car will remain as the manufacturer provides it.
How to replace the engine fluid, we described in detail. You can guide our article and make step-by-step actions, referring to each item. Pay due attention to the safety regulations.
If the motor of your car eats lubricant, it is necessary to inspect its body for leaks. If the level sensor is damaged, the repair of this device is not possible, the manufacturer only provides a replacement. How to replace this element, we described in detail in our article.

Motor oil for Skoda Octavia

Pretty often owners of Skoda Octavia A5 and A7 are asked about the periodicity of the substitution of motor oil in its own car, as well as how much and what is it better to pour. Also, the owners of these cars are disturbing the oil consumption in the process of use. What oil pour into the engine and the box of your car. Someone bought a car with hands. In this article, we will respond to all questions regarding their own oil substitution, also choosing it and affect the repair of the level sensor in the motor crankcase.

To start a little about motors

Motor Skoda Octavia A7 1.4 TSI has turbo Prepared and has a capacity of 140 hp
Motor Skoda Octavia A7 1.6 MPI is equipped with point injection, and its power is 110 hp
On the model Skoda Octavia A5, the tour was installed 1.8 TSI engine, with the help of a turbine, this motor has a capacity of 152 hp
The same unit was installed on the A7 Tour model and has a greater power - 180 hp.

Oil selection for cars Skoda Octavia.

VW 504.
VW 502.

Specifically, these tolerances must be indicated on the canister label with the latest liquid. What oil pour in 1.5 DCI? When using high-quality liquids, Skoda Octavia 1.6 - 110 forces motors and 1.8 will serve not one hundred thousand kilometers of run.

If pouring bad materials, lubrication consumption May be significantly increased.

Read the same way

So that you know which oil is better pouring, we will reply - original. Specifically, unique lubricant, it is impossible to make its functions better, the fact that protects the parts of the motor from the oversized wear.
to content

Getting to work

To carry out similar work, you need to use a viewing pit or a car lift.
Unscrew the oil filter using a special puller, then install a new filter and tighten it.
Remove the plastic protection of the engine crankcase, after which you unscrew the drain plug and wait until the whole liquid strokes into the container.

This work is desirable to carry out on a heated motor, since the viscosity of the lubricating fluid decreases, thereby increasing its fluidity.

Tighten the drain plug, then mounted the ceter protection in place.

Fall fresh liquid, observing the level. Check the level thoroughly and restrict the volume of the oil fill. Which oil is better pouring. It is necessary on the temperature how much to pour into the engine of the korola. To know how much pouring, you need to use probe. Which oil pour into the engine Skoda Octavia 1.8 TSI 152 hp This probe has divisions, on many cars the distance between the minimum and the maximum is equal to one liter.

Tighten the filler plug, then run the power unit and make sure that the lubrication system pressure lamp went out.

Mustle the motor and check the level again using the dipstick. If necessary, make a liquid plot with small portions. What oil pour in 1.8 TSI? And the Skoda on Leninsky pours Mobil 1. So the question arises? Using this method, you will better control the volume of fluid flexible, and later you will know how much lubricant is needed by your motor.

If the fluid is at a minimum mark, it is necessary to pour about 400 milliliters, it is necessary to do this in several techniques, filling the entire volume.

What oil Fill in VW / Audi / Skoda / Seat. Tolerances VW.

What fill oil VAG (VW / AUDI / Skoda. / SEAT). Tolerances VW. Passat B3 / B5 / B6 / B7, Jetta, Polo, CC, AUDI.

Replacing the Skoda engine oil (Skodamaster.ru)

Learn all about car repair features Skoda. We will help our site Skodamaster.ru we have a wonderful one.

Read the same way

As soon as the level reached the mark between the minimum and the maximum, the liquid should be discontinued and this work can be considered completed.

Attention! If the motor of your car eats oil, you need to set the level at the maximum mark, after which it is carefully monitored.

to content

Solving problems with leakage and lubrication consumption.

Repair of the level sensor is not possible due to its design features. Auto: Skoda Octavia A5, G.V. 2011 (selling May 2011), 1.8 TSI, I change the oil every or can pour already VW. Engine oil. Which oil you need to pour somebody poured Nissen's native oil. On Motors A7 1.4, 140 forces, this malfunction is found quite often. Which oil is better pouring into a car transmission of Renault Simbol. Find out what oil pour into the motor What oil to the engine is; What oil in the box. Therefore, the owners of 140 strong engines often complain that the engine eats lubricant, approximately 400 milliliters per 1000 km of way. Do not get upset, you need to immediately inspect the Carter for the level sensor leakage, most likely the problem is in it.

Repair of the sensor

Read the same way

After installing the new part, it is necessary to replenish the amount of lubrication.

In case the motor eats lubrication after replacing this spare part, most likely, you will have to repair the entire unit. Communities\u003e Volkswagen Club\u003e Blog\u003e Friends Help! What oil pour in 1.8 CDAB 1.8. 152 hp turbo-change. What oil pouring? Toyota Corolla 2008 in 1.6 DV. 1 zr. What oil to pour into the distribution and rear differential Ford Explorer 5? Pour in Ford. Perhaps the lubricant eats precisely because of the increased wear of the piston rings. Also, the engine eats lubrication after overheating or eats due to the failure of the valve oil seals. All these reasons can be simultaneously, and then the power unit eats lubrication in huge quantities. The integrated repair of the power unit is comparable to the total value of the entire car, and this is a considerable expense of finance.

to content

Conclusion

As we know, motors Skoda Octavia. A7 and A5? Such as 1.4,1.6,1.8? Possess a capacity of 110 to 140 horsepower, are quite reliable aggregates. If you make proper service and regularly, these engines are able to retrieve without repairing 300,000 mileage kilometers.
To know which lubricant is better pouring into the motor, you need to purchase original solutions and guided the admission of the manufacturer's plant. In this case, the resource your car It will remain as the manufacturer provides it.
How to replace the engine fluid, we described in detail. You can guide our article and make step-by-step actions, referring to each item. Pay due attention to the safety regulations.
If the motor of your car eats lubricant, it is necessary to inspect its body for leaks. If the level sensor is damaged, the repair of this device is not possible, the manufacturer only provides a replacement. Which oil pouring in 1.5 DCI needs to be poured, in the European Renault Grand Scenic 1.5l, 106. When to change and how much oil you need to pour into the Nissan example P12. Which oil is better pouring | Toyota Corolla Toyota Club. Which oil is better Castrol or Mobil? How to replace this element, we described in detail in our article.

Creator: Mexanic July 16, 2015 If some vehicle breakdowns are not as critical, and some distance can be driving with them, then noting that the appropriate pointer is flawed, signing about the oil pressure drop in the engine, it is necessary to urgently complete the movement. Riding with such a problem more expensive, because after a couple of three km in the engine can be ...

The engine on the Skoda car over time is subjected to wear and deformation. To prevent this process, it is necessary to competently select engine lubricant according to tolerances and specifications from the manufacturer. High-quality oil will not only provide the functional performance of the system, but also protects it from damage.

What tolerances on Skoda different models

Skoda Rapid

Czech manufacturer Indicates a lubricant VW Long Life III Lubricant with a viscosity of 5W30 for Skoda Rapid models with capacity and volumes of engines:

122 hp TSI - 1.4 l;
86, 105 hp TSI - 1.2 l;
105 hp TDI - 1.6 liters.

For more powerful power units, the manufacturer recommends the VW Special Plus 5W40 oil. It is poured into atmospheric engines installed on rapid.

At the factory, a new car released from the conveyor is poured Volkswagen's branded lubrication with tolerances 502 and 504. When executed, experts can offer auto-oil with other specifications and tolerances. For example, in Skoda service centers can offer oils from brands Shell, Mobile or Castrol.

Skoda Octavia

In the power units of Octavia A5, the manufacturer recommends pouring products on a synthetic basis. As for tolerances, they must comply with the standards of VW 502/504/505/507. Viscosity - 5W40, 5W30. However, when performing, the 0W30 lubricant is poured. Car enthusiasts prefer:

Motul 8100;
Castrol EJ;
Shell Helix ultra;
We are sitting about;
X-wedge;
Liquida moth.

TDI 2.0 - 3.8 l;
TDI 1.9 - 4.3 l;
TSI 1.8 - 4.6 liters;
TDI 1.6 - 3.8 l;
MPI 1.6 - 4.5 liters;
TSI 1.4 - 3.6 l;
TSI 1.2 - 3.6 liters.

According to technical regulation, the oil change is carried out after 15 thousand km of mileage or earlier, depending on operational conditions.

Octavia 7.

In the instruction manual, it is indicated that for cars with a flexible replacement interval, it is necessary to pour oils with VW 504 tolerances if the engine has a volume of 1.2-1.4-1.8 liters and is equipped with a turbine.

In turbocharged engines with volumes of 1.6 and 2.0 on diesel fuel, it is recommended to fill VW 507. If a limited interval is installed on the car, lubricants with tolerances 502 are installed for gasoline.

Czech manufacturer by default flooding Skoda Octavia 7 Castrol EDGE 5W30 car. It corresponds to the tolerances of Long Life III, which may be indicated on the canister together with specifications from Volkswagen.

After passing, the car enthusiasts prefer to change the branded lubricant on alternative analogs from manufacturers:

Mobil;
Shell;
Motul.

The viscosity index is selected based on the operational conditions and temperature indicators of one or another region.

Speaking of replacement periodicity, it is necessary to proceed from the tolerances used. It is best to replace the car to achieve 10-15 thousand km of mileage.

Volumes of filling fluid in motors:

TSI 1.2-1.4 - 4.2 l;
TSI 1.8 - 5.2 liters;
TDI 1.6-2.0 - 4.6 liters.

Oktavia tour

The replacement interval for OTC systems Octavia TUR is from 10 to 15 thousand km, depending on the operating conditions. The manufacturer recommends a synthetic-based lubricant with an index 5W30 or 5W40 depending on the parameters and volume of the engine.

The amount of oil poured is up to 5 liters. As for tolerances, the product must correspond to the VW 503-504. More than old versions of VW 501-502 may also be suitable.

Skoda Superb

Volkswagen car concern uses factory oil on a synthetic-based 5W30 for SKODA Superb engine systems. It corresponds to the tolerances of Long Life III VW. This almost the same lubricant as Castrol SLX. In the service centers in the motors pour lubricant on the synthetic database from the producer of the shell.

You can pour the car and from other manufacturers. The main indicator is the compliance of the tolerances of 502-504 and the viscosity classes of 5W40, 5W30. Also, do not forget about the periodicity of the oil replacement recommended for the engine systems equipped with turbocharging. If the superb model has 2.0 TDI engine, then it is better to use the 5W30 crawler with a tolerance of 507.

Lubrication with VW 504 tolerances must be used when running 15 thousand km. Some car enthusiasts prefer to replace the replacement after 10 thousand km. The regulation allows an earlier replacement if the car is operated in harsh climatic conditions.

Tolerance Skoda Yeti

For the power units set on Skoda Yeti, the original grease GM DEXOS 2. It corresponds to the tolerances VW and LL. The packaging indicates the following tolerances:

VW 504;
VW 501;
VW 502.

In service centers for atmospheric engineering systems of 1,6 MPI, operating on gasoline fuel, use Shell Helix or Edge Castrol with 5W30 viscosity indices. Such power units correspond to the tolerances VW 502/504/505/507. Experts also offer to upload motor lubricants from manufacturers:

Motul 8100 5W40;
Total 9000;
Liquida moth.

Staying on the selection, special attention should be paid to specifications and viscosity. As a rule, 4 liters are used for Skoda Yeti engines. Replacement is performed based on climatic conditions. Recommended frequency - 10-15 thousand km run.

Oil in the engine system Skoda Fabia

The engine fluid on the Skoda Fabia model must have a VW 502-505 tolerance and a 5W40 or 5W30 viscosity degree. Recommended Castrol EDGE.

You can also pour the compositions on a synthetic basis with the viscosity index of 0W30. In service centers, Skoda, specialists use such oil for Fabia with an engine capacity of 1.4.

— new recommendations Skoda Oil in Russia,
- specification and recommendations from the manual,
- Which oil is better and what the dealer pours,
- When changing the oil,
- volume of replaceable oil,
- checking the level of oil on the dipstick,
- What is better to drain or pumping - video,
- Original oil VAG - Cat.Number.

Often there are the following questions, answers to the cat. Gave me dealers themselves:

What oil pours the manufacturer in Skoda? - Shell Helix / Castrol.
What oil do we pour dealers? - Who is concluded by the contract, then pour. Mostly Castrol.
Which oil is better pouring? - Guide not reviews, and the recommendations of the plant and the status of your car.

My experience.
I used to lean oil Liquimirli 5W30 Top Tec 4200 Longlife III - consumption was about 500 gr. On a thousand.

Update 01/14/16
Now I switched to Shell Helix Ultra 0W30, tolerance 502th - the flow rate decreased!
It became about 200 grams per thousand.

shown in this letter

Specifications for oil from the Skoda Operation Manual

With the top of the top, you can mix different oils with each other. it not refers to cars with flexible interservice intervals.

The filling volumes are given taking into account the replacement of the oil filter. Check the oil level when filling, do not pour too much.

For a / m with flexible interval intervals You can fill the oil indicated below below.

To maintain the properties of engine oil, we recommend that oil justifies only the same specification. In exceptional cases, it is possible, only once, to add no more than 0.5 liters of engine oil Specifications VW 502 00 (only gasoline engines) or specification VW 505 01 (diesel engines only).

It is forbidden to use other engine oils - the danger of engine damage!

When changing oil

In severe operating conditions in a major city or strongly dusty, the recommendation on the replacement of oil and filter every 7 to 8 thousand km.

Checking the oil level

The car should stand on an equal horizontal surface, the engine must still be warm after work.
- Mock the engine.
- Open the hood.
- Wait a few minutes while the engine oil holds back into the oil pan and remove the oil dipstick.
- Write the oil with a pure cloth measuring the diagram and insert until it stops.
- Remove the oil to the meter and check the oil level again.

Oil level in zone A - The oil is prohibited.
Oil level in the zone in - You can add oil.

After that, the oil level can rise to Zone A.
Oil level in zone C- It is necessary to add oil.
Enough so that the oil level is in Zone B.

Oil consumption in the engine is a normal phenomenon. Depending on the driving manner and operating conditions, the oil consumption can be up to 0.5 l / 1000 km.

In the first 5,000 km mileage, oil consumption can be even more.
Therefore, it is regularly necessary to check the oil level, best at each refueling or after a long trip.

With a high load on the engine, for example, with long-term riding on highways in the summer, when driving with a trailer or movement along a high-pressure, the oil level is recommended to be maintained in Zone A - but not higher.

In case of insufficient oil level, the control lamp lights up in a combination of instruments. In this case, as soon as possible, check the oil level using the oil. Follow the appropriate amount of oil.

CAUTION
The oil level in no case should be above zone A.
Danger of damage to the neutralization system of OG!

If you do not have the opportunity to add oil in this situation, do not keep moving. Move the engine and consult for help from experts, otherwise serious engine damage is possible.

Motor oil topping

Check the level of engine oil "Seemish
Unscrew the opening cover for the engine oil bay.
Pour the oil of the recommended brand by portions of 0.5 l.
Checking the oil level.
Gently fasten the cover of the oil of the filling hole and insert the measuring probe oil to the stop.

It is forbidden to add additives to engine oil - It can lead to serious damage to the parts of the engine! Damage caused by such reasons, the warranty does not apply.

Useful oil replacement tips

Oil drain after the trip until the engine has been cooled. If the engine is cold, let and warm it up to the operating temperature. Pour the oil of the same brand as the oil that was in the engine.
If you still decided to replace the oil brand, rinse the lubrication system with washing butter or oil of the brand that will be used. To do this, after draining the old oil, pour a new one to the lower marking oil of the measuring probe. Let the engine and let it work 10 minutes at idle. Drain the oil and only after that replace the oil filter. Now you can pour new oil to the required level (up to the top mark on the dipstick).

How to replace the oil and oil filter

Oil change - what is better to drain or pump off

there is no Skoda, but the essence is one.

Original oil VAG - CAT.

Motor Synthetic Oil Special C
SAE 0W-30
VW 502 00/505 00
Catalogue number - G 055 167 m2

Other original, where can you come in handy, I found on the drive

G 052 167 M4 - VAG Special Plus 5W-40 - 5 liters (tolerance: VW 502 00/505 00/505 01)
G 052 167 M2 - VAG Special Plus 5W-40 - 1 liter (tolerance: VW 502 00/505 00/505 01)
G 055 167 M4 - VAG Special C 0W-30 - 5 liters (tolerance: 502.00 / 505.00 / 505.01)
G 055 167 M2 - VAG Special C 0W-30 - 1 liter (tolerance: 502.00 / 505.00 / 505.01)
G 052 183 M4 - VAG LONGLIFE II 0W-30 - 5 liters (tolerance: VW 503 00/506 00/506 01)
G 052 183 M2 - VAG LONGLIFE II 0W-30 - 1 liter (tolerance: VW 503 00/506 00/506 01)
G 052 195 M4 - VAG Longlife III 5W-30 - 5 liters (tolerance: VW 504 00/507 00)
G 052 195 M2 - VAG LongLife III 5W-30 - 1 liter (tolerance: VW 504 00/507 00)

Similar articles: