Mazda fuse block 6 1 generation. Block relay and fuses in the engine compartment

Mazda fuses 3.

For the 3rd generation

In total on Mazda 3 in the body 2013, 2014, 2015+ releases are two blocks with fuses and relays. Below is the location of all blocks for the third generation (3rd generation).

Consider the scheme of each block separately - for which the fuses in them are responsible.

1. Fuse box under the hood

Predoot.	Terminal	Current force (a)	Purpose
			Fog lights
			Far light lights
			Brake lights
			Additional light (lining)
			Engine control system
			Warning FL Shab, Turn Signal Lights
			ABS, Dynamic Stability Control System
			Audio system second option
			Audio BOSE® system (if equipped)
			Audio system first option
			Fuel system, fuel pump
			Headlight Right (RH) * 1, daytime running lights
			Beep, clacson
			Rear lights, license plate lights, parking lights, front headlights sideways
			Transaxle Management Control Systems
			Rear wiper
			Air conditioning
			Engine control system
			Engine control system
			Engine control system
			Engine control system
			Washer and Front Glass Cleaner
			Power windows
			The headlight of the Middle Light Right (RH) * 2
			The headlight left (LH) * 1, the headlight of the Middle Light left (LH) * 2
			Dashboard
			To protect various chains
			Air bag
			Engine control system
			To protect various chains

* 1 with xenon headlights
* 2 with halogen headlights

2. Block of fuses in the cabin to the left of the driver's feet

Predoot.	Terminal	Current force (a)	Purpose
			Seat adjustment
			Door lock
			Power windows
			Heated seats
			Mounting boxes
			Seat weight sensor
			Rear view mirrors
			Mirror adjustment
			Mounting boxes
			AT gear indicator

This instruction took advantage of: 15131 time.

Is it installed on your Mazda 3 audio system BOSE? 5044 people already answered in the survey.

The fuse block and the relay in the cabin are at the bottom on the left side of the driver's foot.

Decoding:

Fuse		Nominal, A.	Purpose
1	Engine Ig.	15
2	Meterig	15	Combination of devices
3	Seat.	15	Seat heater, rear window heater
4	M.Def.	7,5	Heated mirrors, fuse for various chains *
5	Wiper.	20	Wipers and washers
6	SAS.	15	Anti-lock brake system, system active security (Airbags)
7	Back	5	Reversing lamp
8	A / C.	15	Air conditioning
9	Meter ACC.	5	Combination of devices
10	Cigar.	15	Cigarette lighter fuse
11	Room	15	Salon lighting, trunk / luggage compartment lighting
12	R.Wiper.	10	Wiper rear glass / Glass rear door
13	Mirror.	5	Mirror management
14	-	-	-
15	P / Win	20
16	Door Lock.	30	central locking
17	P / Win	30	Electric windows

Relay in the cabin machine

21 - heater fan relay

22 - Relay fuel pump

Block relays and fuses in motor compartment

Decoding:

Fuse		Nominal, A.	Chain fuse
1	SPARE	20	-
2	SPARE	15	-
3	SPARE	10	-
4	-	-	-
5	Glow Sig.	5	-
6	Inj.	15	Engine management system
7	ENG BAR	10	Air Flow Sensor, Engine Management System
8	ENG BAR2.	15	Oxygen sensor
9	Head Lr.	15	Middle Light (right headlight)
10	Head LL	15	Middle Light (left headlight)
11	Head HL.	10	Far Light (left headlight)
12	Head Hr.	10	Far Light (right headlight)
13	-	-	-
14	Hazard	10	Alarm
15	Stop.	15	Stop signals
16	ENG + B.	10	Electronic motor control unit and automatic transmission
17	-	-	-
18	Fuel Pump	20	Fuel pump
19	Ig Key 1.	40
20	-	-	-
21	-	-	-
22	Glow.	40	-
23	Ig Key 2.	30	Fuse for various chains
24	Blower.	40	Heater Fan Electric Motor
25	BTN.	40	Salon lighting, central locking
26	Heater.	20	Heater
27	Defog.	40	Rear window heater / rear door glass
28	ABS	60	Anti-lock brake system, fuse for various chains
29	Ad Fan.	30
30	Fan.	30	Condenser fan motor, fuse for various chains
31	Tail	10	Overall lights, highlighting device combination
32	Illumi.	10	Lighting salon
33	Mag.	10	Electromagnetic clutch
34	Audio.	15	Magnitol
35	P.Seat.	30	-
36	-	-	-
37	Seat Deicer.	15	Fuse for various chains *
38	H / Clean.	20	Farm cleaner
39	Fog.	15	Fog lights*
40	Main.	100	Chief fuse

Block relay under the hood

Purpose:

1 - Main Fuse

6 - Relay Fan Cooling System No. 2

7 - Sound Relay

8 - Relay Fan Cooling System No. 3

9 - starter relay

10 - Fan Relay Cooling System No. 4

11 - Low Frequency Relay

12 - Rear Glass Heater Relay

13 - Relay fog lamps

14 - air conditioner relay

15 - Main relay

16 - headlight relays

17 - Dimensions Relay

18 - Relay Fan Cooling System No. 1

19 - headlight washer relay

20 - Relay fog lights

Removal and installation of a block of relays and fuses in the cabin and under the hood.

Replacing the main fuse:

• You need to disconnect the wire from the negative battery terminal.
• Remove the cover of the block itself in the windscarette space.
• Then remove the main fuse in the alternate sequence (the numbers are shown in the figure).

03.03.2018

Below you are provided with a photo report that will help you replace the fuses personally, without the help of specialists. If you are the owner of the Mazda car in the second, third, and fifth generation, then this photo report is specifically for you!

On the Mazda of the sixth generation put flat fuses. You, in order to replace the fuses, you will definitely need nippers. Tongs are located behind the lid, also look for the scheme.

If suddenly, you did not find a forcepets, then take some small pliers.

The fuses are located under the hood, as well as another block in the cabin.

Under the hood, the block with the battery is located near the battery. And the fuses are located near dashboard, those in the cabin.

At the beginning, we will free the lid from the locks, the cover will remove. Now we need to find tools: these are nippers and a scheme. If you suddenly do not understand the scheme, and you want more details, then you need to turn to the manual.

Take the nippers and pull out the fuse that you want to replace from it. After pulled out, take the fuse and direct sunlight on it. So you can detect whether the insides are damaged, iron. If soooked, then you will need to replace.

However, if something has caused a previously suspicion, then change without checking.

In principle, the prices for fuses are pleased and do not force to postpone on then.

Do not forget very important item! The fuse is changing only for a fuse with the same agenial as in the previous one. Each fuse has its own color.

If suddenly, after replacing, they did not work, it means the problem in the other.

This is a fuse box that is under the hood.

to remove the lid, you need to release it from the clamps.

Now we can remove the cover.

And that's all we need - these are nippers and location scheme

Meet - these are fuses.

Another unit located in the cabin.

Open the lid again.

Patty her something.

Now we can dismantle the lid.

The lid was removed and saw fuses.

We take tongs and get the fuses.

Pull out.

Look at the safety of fuses overwhelmed if or not.

We establish a new one in the place of the old.

Tongs can be returned to the place.

Set the cover back.

Install the clamps.

And set the lid.

Report error

Highlight it and press Ctrl + Enter

In the modern automotive world, the trend has recently shifted to the fact that every self-respecting automotive manufacturer should have in the line of models at least one crossover.

Recently, the presentation of the Lamborghini URUS model was held, and now Ferrari Purrosangue will appear among the charged crossovers of sports style, and it is likely to be the opportunity to become its main competitor.

The first mentions and general information. The first information is that Ferrari plans to establish the release of crossovers, appeared in the fall of 2018. Almost a year later, information on the release of the sports version of the Purosangue crossover was published. According to representatives of the manufacturer, the new model will be able to compete with their main rivals - Bentley Bentayga, Rolls-Royce Cullinan, and Lamborghini Urus. This model In the number 15, the presentation of which the automaker plans to implement until 2023.

Technical features. To create new cars, applied new Type Trolleys in which the engine is located in the central part, for example F8 Tributo.

The second option provides for the location of the engine in the front or middle part. It is on such a GT that the crossover Purosangue will be created. This will make it possible to install in the rotor space of the engines of type V6, V8 and V12. In addition, it is possible to establish a hybrid power plant, whose features of which will be robotic transmissions and double clutch. The drive in this case can be either front or complete. The consequence of the application of such developments will be received by the automaker the possibility of installation on the machine of various types of bodybuilders, and their combination depending on the wishes of the buyer.

Presumably, the length of the car will be equal to about 5 meters. The passengerism of the novelty will be 4 people. A burbed engine V8 will be used as a motor, the power of which will be 400 hp. Interact with it, three engine drives will immediately. The first one will be located between the motor itself and the gearbox, and the remaining two provide the drive to the front wheels. Motors, located in front, have an independent control system, which gives the car the ability to change the vector thrust. The total power of electric motors is 220 hp, and all the motors of this crossover - about 1000 hp

A 8-speed robotic gearbox operates in a pair with this motor, with the presence of two clips and a full drive system. An interesting point is that there is no in the design reverse gearThe role of which performs the reverse engines on the front axle. At this moment, the internal combustion engine does not work. Power supply of electrical motors is performed due to Li-Ion batteries with a capacity of 7.9 kW.

Outcome. The approximate reserve of the course of this vehicle on electric traction is 25 km, with a maximum speed of movement of 135 km / h. According to available information, over time, the hybrid version of the power plant for Ferrari Purrosangue can be replaced with a reinforced six-cylinder motor. There is a high probability that in the end it will be charged with a charge with power installation Type V12. What will eventually get this car and how many options for the configuration it will be, at the moment there is no information yet. Perhaps comments from representatives of the Company on this issue will be made somewhat later.

Suzuki begins to test updated crossover Vitara Brezza. The first pictures from photospones have already appeared on the Internet.

In the photo you can see that the most popular crossover brand is another grille, changed lights and new bumpers. Inside there is a modern multimedia SmartPlay Studio with voice control. The salon is decorated with better materials.

Under the hood of a restyled parkerchief costs 1,5-liter atmospheric benzomotor on 105 horse power. In Tandem, 6-speed "mechanics" will work with it. The line of engines includes 1,3-l. Diesel for 90 horsepower. Transmission with him works robotic AMT.