The car's wheel drive is attached to the hub node and is the usual flywheel. 6. The drive is important for the movement of the wheel is provided by the energy generated by the engine. To rotate the wheel of a greater mass, it is necessary to spend more energy, and accordingly more fuel. When stopping heavy wheels, the load on the aggregates increases brake system car. Therefore, many factors such as comfort, manageability, safety and efficiency depends on correctly selected parameters.

Disc parameters for Mazda 6

• PCD breakdown, that is, the number of holes for fastening and the diameter of the circle, on which they are located - 5 × 114.3 mm.
• The diameter of the central hole DIA is 67.1 mm.
• Standard disk fastening nut 12 × 1.5 mm.

The width, diameter and departure of the disk may vary depending on the year of release and modification.

Original alloy 6 are designed specifically for this Mazda model and meet all recommended parameters. Exclusive design of five paired rays of various shapes emphasizes dynamic and bright appearance car.

What should be remembered

Therefore, it is difficult to visually distinguish a PCD breakdown if the difference is 1-2 mm. Often the 5 × 112 disk is installed instead of 5 × 114.3. But even such a "kopeck" difference will not let the opportunity to tighten all the nuts to the end. As a result, the disk does not completely sit on the hub, and when moving, vibration and self-deduction of nuts will occur. Do not believe our eyes, pay attention to the label!

The diameter of the CO (DIA) is the diameter of the central opening of the disk. It is measured by a disk adjacent to the hub. For Mazda 6, this indicator is 67.1 mm. The diameter of the central opening must coincide with the landing diameter of the hub. The exact pairing of two parts provides centered wheel disk and relive the brake disc from vibrations. This is important, because according to the reviews of Mazda 6 GJ owners, regular brake discs have a tendency to overheating and deformation.

Manufacturers of universal cast discs often perform a central hole of the larger diameter, and for specific model The car requires the installation of a centering ring for installation on the hub.

Disc width

The size of the disks must correspond to the size of the tire. And if the diameter of the disk and the diameter of the tire coincides, then difficulties arise with the width. In the disc marking width indicated in inches, and the width of the tire in mm. When selecting, you must execute recalculation, or refer to the tables of compliance of tire sizes and disks. The planting width of the Mazda 6 in 7 inches corresponds to the width of the tires from 200 to 225 mm.

Departure

Disc deposit ET is the distance in millimeters from the vertical plane of the symmetry of the disc to the plane adjacent to the hub. Usually, the disk departure is a positive value, but in some cases the disk departure can be zero or negative. The departure affects the magnitude of the car's wheelbase, since the distance between the wheels depends on it.

Mazda 6 wheeled discs have a positive departure, for example, ET 50.

Diameter

The diameter is indicated in inches and exactly corresponds to the landing diameter of the tire. Recommended diameter of Mazda 6 disks from 16 to 19 ".

A type

Modern wheels are manufactured by the following types:

• Standard steel wheel. The budget option is distinguished by a large insistant mass. Discs have low corrosion resistance and durability. Plus is maintainability.
• Alloy wheeled. They are made of light alloys, have an attractive appearance and are not subject to corrosion. By the method of production is divided into cast and forged. Alloy wheels when entering a large pit burst, forgeds withstand stronger strikes.

Drill

Drilling disk or break, PCD designation (Pitch Circle Diameter) Determines the circle diameter in mm, along which the holes for fastening the disk and the number of these holes are located. For Mazda 6 standard it is 5 holes at a diameter of 114.3 millimeters.

In conclusion, a couple of tips:

• Even if you think that all technical specifications You are clear, buying discs for Mazda 6 is better yet after consulting with professionals. It will save you from extra costs and add security on the roads.
• Choose disks of proven manufacturers. No copy is compared to the quality of the Mazda Corporate Disc.

Mazda 6 is a car of a passenger class from the Japanese concern of the same name.

Since the presentation of the Mazda model 6 and until the end of 2018, three generations were released, namely:

• Mazda 6 GG in the period from 2005 to 2007;
• Mazda 6 GH in 2010;
• Restyled version in 2011;
• The third generation in early 2012.

Changes touched not only exterior, but also of the interior, technical characteristics, power aggregatetransmissions.

Sizes of full-time disks for generation Mazda 6

Alternative Options Mazda Disc 6

• Cast: low weight, low pressure on support bearings, hub, transmission;
• Stamped: durable, expensive;
• Forged: durable, one third is easier than analogues.

* Specify prices in stores at the time of purchase.

• Check the wheel balancing on a special diagnostic stand in the workshop. When detecting deviations, restore the design geometry. It is impossible to "reanimate" the disk due to the lack of necessary equipment;
• When cracking, dents on the rim, contact a service station for prevention, rolling;
• On high, medium high-speed modes Avoid getting into pits, bumps. The disk is deformed, the tightness will break, the tire cord is damaged;
• Watch out for the pressure in the tires, it should not be different from the manufacturer recommended by the manufacturer. When deviations, turn yourself on yourself, contact the service station;
• Observe the transition to summer, winter modes. In summer, the tire pressure is higher by 0.15 atm., In winter less on a similar value. The parameters are listed in the operating instructions;
• Tighten the nuts on the rim by a dynamometric key. Excessive tightening contributes to the cliff of studs, weak - unscrewing. What will lead to a collision on the road with a meeting participant of movement.

In sunny weather, cast aluminum discs are less susceptible to the devastating effect. But in a slush, ice, when the road is sleeping with chemical reagents, the rim is of corrosion. It provokes paint delay, molecular composition destruction, decreased structure strength.

Wash the wheels as they are contaminated. As a rag is hardly laundering, use compressors high pressure. Such a class equipment is available on many hundred, workshops, service centers.

Systematic polishing allows you to get rid of scratches. Previously clean the wheel from dirt, dry carefully, after which we treat with a chemical. Wipe with a rag several times.

Keep the wheel in possession, do not storage at each other. Clean the dirt, dry, wrap the cellophane. Some motorists practice conservation to apply an aerosol on the surface.

Medium resource exploitation original disks 180 - 200 thousand km. Under the condition of moderate driving style, the replacement interval will increase by a third. The resource of the use of tires 70 - 80 thousand km.

What is affected by the installation of freelance disks on the Mazda car 6

Tire size, disks affect specifications cars. The instruction manual shows the recommended and permissible dimensions.

For the driver who uses the car as a means of movement, "factory" (stock sizes of the rim is more than enough. In the case of tuning, changes in standard characteristics, dynamic indicators, "Pereobulyak" the machine into non-standard wheel sizes.

The list of characteristics that change the installation of freelance wheel sizes to the Mazda car 6:

• Controllability;
• Clutch with roadbed;
• Sharpness, responsiveness of the steering wheel;
• Avaplaning;
• Comfort;
• Noise level;
• Fuel consumption in a mixed cycle;
• Tread wear.

Decryption of labeling of discs, tires on Mazda 6

For example, R19 5 × 114.3 6.5J ET50 (see photo):

• PCD (Pitch Circle Diameter) Diameter of the circle of the center of the mounting holes: 71 mm;
• Disk radius: for 19;
• Number of holes 5;
• Type of fasteners: M11.0 - diameter of the heel;
• Thread size (step): 1.25;
• The diameter of the central opening: 67 mm;
• Pressure (front / rear): 2.0 / 2.0 bar.

PCD Parameter: Distance between centers of opposite holes. Measurement of the line without dismantling the wheel. For a five-bolt design, the resulting distance must be multiplied by the coefficient of 1.05.

Rim departure ("ET"): the distance between the point of contact with the disk to the hub and the middle of the rim width. Designation: Deport, Offset. The removal is positive if the plane does not go beyond the point of contact, otherwise the departure is negative. The further the rim is from the body, the amount of departure is to the zero mark.

• D - the diameter of the center opening, is measured in millimeters.
• J, H and subsequent alphabetic symbols indicate the labeling of the champs on the rim shelf. Symmetrical, asymmetric and combined.
• "Hamp" is a lease on the rim for the Delician Tire. When moving "Rails" keeps the tire board, preventing depressurization.

Digital characters indicate the release date, month, year.

• TUV - Abbreviation of the controlling body, for compliance with quality standards.

Maximum load on the wheel: Unit of measurement depends on the country of rubber manufacturer, rim.

Disk

Mazda 6 II GH

205 – tire width. The indicator is calculated as the distance between the outer boundaries of the lateral surfaces of the pumped tire without taking into account the protective belts. Measured in millimeters.

60 – tire profile height thatit is measured as a percentage of width. What does it mean? To find the height, you need to calculate 60% of 205 mm. Thus, the tire height is obtained: 205 x 0.6 (60%) \u003d 123.0 mm

R - Means the Radial Bus. From the English word Radial, that translated means a radial type of tire. This is a method of laying rubber and metal Cord in production. Of course, you can meet the letter D - diagonal, but these tires have now practically disappeared from production.

16 — the diameter of the hole in the rubber, or on which disc can be mounted this rubber, that is Diameter disk. This size is always indicated in inches!

The diameter of the disk cannot be greater or less than the diameter of the wheel, you simply do not wear it. That is, if the rubber is 16 inches (406.4 mm), then the disk should be 16 inches (406.4 mm)!

Additional Information

Mazda 6 GH, years of release: 2007 - 2012.

• Fasteners for the hub: Nut;
• Thread: M12 x 1.5.

Additional information indicated in the marking on the sidewall bus:

• XL or Extra Load is a reinforced tire, the load index of which is 3 units higher than that of ordinary tires of the same size.
• M + S or M & S (Mud + Snow) - dirt plus snow - winter and all-season tires.
• All Season, AW (Any Weather) or AS - All-season tires
• Pictogram * (Snowflake) means that the rubber is intended for use in winter conditions. If there is no tire on the sidewall this label, then this tire is designed for use only in summer conditions.
• Aquatred, AquaContact, Rain, Water, Aqua or Pictogram (umbrella) - Special rain tires.
• Outside and Inside - asymmetric tires, when installing, it is important not to confuse which side is outdoor, but which is internal. When installing, OUTSIDE must be from the outside of the car, and Inside - with the inner.
• Rotation or arrow - This marking on the sidewall of the tire means a directional tire tread pattern. When installing the tire, it is necessary to strictly observe the direction of movement.
• Tubeless - besleless tire. In the absence of this inscription, the tire can only be used with the camera. Tube Type - indicates that this tire must only be operated with the camera.

Tire

Disk

Mazda6 III GJ.

Regardless of the method of disc production - cast, forged, stamped, there is a standard labeling of the size of the disks.

We will analyze the main parameters of 6 GJ - 7.5JX17 5x114.3 ET 50.

7.5 - Width of the disk in inches. Translated to millimeters is 190.5 mm.

J - the symbol indicates certain constructive features - The form of clouds from the disk and serves only for information.

17 - the boarding diameter of the disc in inches, which exactly corresponds to the tire's landing diameter.

5x114.3 - PCD (Pitch Circle Diameter) or Controlling in Russian. Here, the number 5 denotes the number of nuts for nuts, and 114.3 - the circle diameter (PCD) in the millimeters on which they are located.

ET 50 - Departure of this disk Positive and is 50 mm. The disc / or removal) is the distance between the wheelbase of the wheel disk and the middle rim wheel. Plival plane is a surface that presses wheel Disk To the car hub.

Additional Information

In addition in marking 6 GJ, 2012-2015 Information may be indicated:

• Dia D 67.1 - the diameter of the central opening in mm. In an ideal situation, this size corresponds to the landing diameter of the hub. On many produced cast discs For greater versatility and applicability various brand Car, the diameter of the central hole Dia is made great. In this case, the landing diameter of the hub is less than the DIA disk, and then it is necessary to use a special centering landing ring (transition ring).
• Max Load - Maximum load designation (designated in pounds or kilograms).
• SAE, TUV, ISO is an analogue of our GOST, which controls the authority. Indicates the standard that matches the marking of this wheel.

Tire

Disk

Mazda Mazda6 III GL

Years of release: from 2015.

Additional Information

• The diameter of the central hole (DIA): 67.1 mm;
• Fasteners for the hub: Nut;
• Thread: M12 x 1.5.

Tire

Disk

Marking rubber and wheels carries a lot necessary informationIt is important to be able to deal with it. Without this information, you will not be able to choose the right tires on your car, they simply do not fit into dimensions. Special plates are applied on the car body with recommendations on the dimension of tires, just read them and go to the store for new ones. However, there are not always such signs, and it is necessary to determine the size of the Mazda tires 6!

When choosing a wheel on the Mazda car, special attention should be paid to the parameters of the disks and tires. For each model passenger cars japanese manufacturers Use individual sizes. For example, the factory equipment of Mazda 6 involves the use of rubber 195/65 / R15. As alternative option You can use Tires 205/50 / R17, 205/60 / R15, 225/40 / R18, 225/35 / R19.

Wheel size on Mazda 6 I GG

• an increase in the load on the hub bearings;
• loss of aerodynamic indicators;
• reducing currency stability car.

In addition, such indicators as fuel consumption, manageability and safety at the time of movement by car are dependent on the selection of wheels.

Before choosing a wheel on japanese car, It is necessary to study its parameters:

1. width of the tire;
2. profile height;
3. speed \u200b\u200band loading indices;
4. tire pressure;
5. diameter;
6. departure;
7. the number of fasteners;
8. types of fasteners;
9. circumference parameters;
10. centering hole.

When choosing non-standard sizes Wheels can be used tire calculator. This device is capable of selecting optimal sizes of discs and tires, the load index on the wheels, taking into account the velocity of the car and the magnitude of the road lumen.

Wheel size on Mazda 6 version GG 2002-2008:

1. thread diameter: 5.

The size of automotive tires on Mazda 6 GG

We give a table where we specify the load indexes on the wheel, speed, sizes and pressure in the tires on the GG version.

Disks on Mazda 6 GG

Wheel size on Mazda 6 II GH

• 205 denotes the width of the automotive tire. This indicator is measured in millimeters and is determined by calculating the distance of the side edges of the rolled tire. At the same time, protective belts are not taken into account;
• 60 demonstrates the profile height of the tires measured in percentage ratio To width automotive rubber. Thus, to determine the height, it is necessary to know the ratio of 205 mm to 60%. As a result, we calculate the profile height: (60% / 100%) x 205 \u003d 123 mm;
• R points to the radiality of the tire. Translated by S. of English language Radial is the lapse of the automotive tire. Thus, manufacturers combine rubber and cord when creating tires. Also, D is also used to designate radiality. However, the tires with such designation almost no longer produced;
• 16 Indicates the diameter of the centering opening of the disk for which you can use automobile bus.. This indicator is indicated in inches.

Mazda 6 GH 2007-2012 release:

• diameter of the centering opening Dia: 67.1 mm;
• hub Element Fasteners: Nut;
• thread: M12x5.

For more information, indicated on the side of the tire:

M & S (Mud and Snow) Translated from English dirt and snow: incoming and winter tires;

XL (Extra Load) reinforced tire with wheel load index exceeding 3 units of conventional tires with similar sizes;

AW or AS promon tires;

Symbol * Indicates that the tire is designed to operate in the winter period. If this marking is not specified on the side of the tire, then the rubber applies only the summer period;

Inside, Outside - the inner and outer side of the asymmetric tire. Accordingly, when installing the wheel, the inscription INSIDE should be located on the outside of the rubber, and the OUTSIDE pointer from the inner part of the tire;

Water, Rain, Aquatred, Aqua or the symbol in the form of an umbrella indicate rain rubber;

Inscription Tubeless. - Besleless tire. If there is no inscription, it denotes that the tire is used with the camera. Tube Type pointer - Tire is installed only with the camera;

Arrow or inscription Rotation Demonstrates the direction of the tread pattern. Points on the side of the tire.

Wheel size on Mazda 6 III GJ

For the Mazda car 6 III GJ, the standard labeling of the size of the disks is used, as is the other models of Japanese cars.

Before choosing a wheelchair, it is necessary to explore the standard parameters of the authonation of the factory configuration 7.5 × 17 5 × 114.3 ET50 to the GJ version, where:

• 7.5 shows its width in inches;
• the J symbol indicates the design, shape of the core;
• number 17 indicates the diameter of the dial planting. This indicator must correspond to the same tire parameters;
• 5 × 3 - PCD disk break. The number 5 indicates the number of holes for fasteners of nuts, 114.3 denotes the diameter of the circumference of PCD;
• The ET50 marking indicates a disk departure with an indicator of 50 mm. The departure is a distance from the carnival plane of the car to the middle of the wheel rim. The zone of pressed the wheel disk to the car hub is called a bustal plane.

The labeling of wheeled autody on Mazda GJ 2012-2015 is included in the following information:

The Max Load inscription indicates the maximum allowable load on the wheel;

ISO, TUV, SAE - classifications standards for determining the quality of the disk, similar to GOST. For each product, one or another quality standard is indicated;

Diameter of the centering hole Dia: 67.1 mm. This indicator must correspond to the diameter of the landing of the hub. On casting manufacturers use a large centering hole. To disks can be universal for any type of cars.

However, in this situation the diameter of the landing hub and DIA differ from each other. Therefore, as a connecting element, it is recommended to use a centered transition ring.

The correct choice of wheel size depends on the ability to determine the disk and tire marking. If the owner of the car does not know the marking designation, then the selected tires or discs may not come across the dimensions.

Wheel sizes on Mazda 6 III GL

Mazda 6 version of GL is produced since 2015. Wheel Parameters:

hub Element Fasteners: Nut;

m12x1.5 carving;

Tires on Mazda III GL

Discs on Mazda III GL

We draw attention to the fact that the drilling or breakdown point to landing the wheel diameter. In the operating instructions, Japanese manufacturers indicate PCD, planting diameter.

On Mazda cars, 3 different versions and releases use the same discs of the disc brass: 5 × 114.3. Thus, this drill is determined that the disk is attached to 5 bolts, and its diameter is 114.3 mm.

Wheel size on Mazda 3

The parameters of the wheels on Mazda 3 I and II release are almost identical. The differences are that higher arches are installed on the second version of the vehicle.

Thus, on Mazda 3 II BL, you can mount the wheels with departure 35 and width 8. Standard parameters of 16.17 inches discs with a diameter of 6.5 mm.

Disks on Mazda 3 2013, III generation BM

Factory sizes of discs on Mazda 3 with the body type of hatchback and sedan 2013-2017 release - 16, 18 inches depending on the configuration. Tires are installed with sizes: 215/45 / R18, 205/60 / R16.

Pressure in the tires on Mazda 3

When using R16 tires with a load of up to 3 passengers, the pressure of the front and rear wheels Must be 2.5 bar. When loading up to 5 passengers, the pressure of the rear wheels is 3.2 bar, and the front tires are 2.8 bar.

Tires R18 When loading up to 3 passengers should have a 2.4 bar pressure for front wheels and 2.3 for rear tires. Full load up to 5 passengers - rear wheel pressure 3 bar and front tires 2.8 bar. Such information is listed in the MAZDA 3 III generation instructions.

How to independently determine the drilling?

Method for determining the timber breakdown:

1. the number of fasteners (bolts) elements is calculated by the openings on the disk. For example, on Mazda 3 installed 5 holes in the disk;
2. the calculation includes determining the distance between the inner walls of the holes and addition to the resulting value of their diameter.

For example, by defining the number of bolts and the diameter of the holes, the car owner receives a value of 5 × 114.3 for Mazda 3.

18 inch can be exception wheel disks For Mazda 3 with front leading bridge and engine capacity 2.0, as well as versions with fully drive and 2.5 liters.

Wheel size on Mazda CX5

On all configurations of Mazda CX5, starting from 2012, use alloy and steel discs 17 and 19 inches with marking 17x7J ET50, 19x7J et50:

• ET - disc departure 50 mm;
• 7j - rim width;
• the diameter of the centering hole is 67.1 mm and 5 holes for attaching bolts around the circle of the disk of 114.3 mm; PCD 5 × 3.

On Mazda CX5, wheels with non-standard parameters (- + 0.5) inches can be installed.

Tires on Mazda CX5

If you use factory discs to 17, 19 inches, then for the CX5 model, tires are selected with sizes: 225/55 / \u200b\u200bR19 / 99 V, 225/65 / R17 / 102 V. Marking designation:

• 225 - rubber width;
• 55.65 - profile tire height;
• 99,102 - Load index from 750 to 850 kg;
• V - wheel speed index up to 240 km / h;
• R - Radial tire design.

If you choose the tires on the load index, then it is necessary to take into account the fact that the estimated weight per person is 75 kg. In the extreme case, you can calculate the number of passengers and install tires with high loading capacity.

Using automatic selection of tires and discs for the car Mazda 6.A variety of problems associated with their compatibility and compliance with the recommendations of automakers can be avoided. After all, they turn out to be a huge impact on a significant part of the operational properties. vehicleFirst of all, on handling, fuel efficiency and dynamic qualities. In addition, it is impossible not to note the importance of tires and wheel diskslike elements active security. That is why their choice should be approached as responsibly, i.e., with knowledge about a number of parameters of these components.

Unfortunately, such technical nuances Owning only a small part of the car owners. However, automatic system The selection will be extremely useful, regardless of this, since it will minimize the likelihood of incorrect selection of wheeled wheels or tires. And choose from anything, thanks to the widest assortment of such products presented in the Mosavtranshina online store.