Tires 185 60 14 on Kalina. What size wheels on Lada Kalina: tires, discs, breakdown

Using automatic selection of tires and discs for the car Lada Kalina A variety of problems associated with their compatibility and compliance with the recommendations of automakers can be avoided. This is due to a weighty role, which is fulfilled by them in providing a number of performance characteristics any modern vehicle. In addition, it is impossible not to note the importance of tires and wheel diskslike elements active security. That is why their choice should be approached as responsibly, i.e., with knowledge about a number of parameters of these components.

Unfortunately, most car owners prefers not to go into such technical nuances. This situation does automatic system Selection is an extremely useful tool that prevents the adoption of incorrect selection when purchasing tires and wheels. And it is very wide, which is due to the variety of the range of such products presented in the online store "Mosavodina".

When you need to replace the discs to Kalina, the question arises, what to choose are the most factory or not. Molded often look more attractive, update the general view of the car, but how practical is it? What should pay attention to when choosing?

Characteristics of regular discs of different complete sets

Models of the first generation of viburnum are equipped with products 14 and 13 inches. The alloy option was released with a diameter R14. With this reduced tire profile it is possible to install and R15 (so made in the sports version).

For all modifications of models Sedan, Hatchback, wagon, the first generation Sport, released in 2004-2013, the following dimensions were used:

• 5J disks at 13 ET40, suitable rubber - 175/70R13;
• 5.5J at 14 ET37 - 175 / 65R14;
• 6J at 14 ET37 - 185 / 60R14;
• 6.5J at 15 ET35 - 195 / 50R15;
• 6.5J on 16 Et45 - 195/45R16.

For all modifications of auto hatchback, wagon, cross, second-generation sports (from 2014), set such types of discs and tires:

• 5.5J on 14 Et35, tires - 175/65R14;
• 6J at 14 ET35 - 185 / 60R14;
• 6j at 15 ET35 - 185 / 55R15;
• 6.5J at 15 ET35 - 195 / 50R15;
• 6.5J on 16 Et35 - 195/45R16.

In the packages "Norm" and "Standard" of the second generation there are no factory alloy wheels. In the configuration "Lux" buyer can choose cast R14 and R15.

On which discs can be changed factory

When products are bought not from among the manufacturer offered by the manufacturer, the radius of the wheel should be taken into account, it should not be very different from the regular one. It is necessary to take into account the year of release of the car and its complete set. Wheel parameters are absolutely independent of the body shape: whether it is sedan, hatchback or wagon.

When choosing discs on Kalina, you need to know the number of mounting holes and the diameter of the circumference of their placement (drilling, LZ * PCD) - 4 * 98. The diameter of the main opening must correspond to the diameter of the car hub (DIA) - 58.6. The departure values \u200b\u200b(ET) must be selected by such as the manufacturer of the car recommends. Thus, for the models of the first generation 1117, 1118, 1119 wheels from R13 to R16 inches are suitable; width 5-6.5; Em 25-38; Dia 58.6; LZ * PCD 4 * 98. For the second generation 2192 and 2194 the following parameters are: R from 14 to 16; width from 5.5 to 6.5; Em from 25 to 35; Dia and LZ * PCD - similarly.

Properly selected wheels for the car Valina is safety on the road, reducing fuel consumption, extending the life of the transmission.

Steel or alloy: what is better and why

By the method of manufacturing a model is divided into two types. Steel (they are still called stamping) differ in that in production, all the details are welded. it simple technology, Therefore, the price of their low. Positive sides This option: discs are easily restored even with deep deformations, they have high reliability, durability, repair is simple and budget. Negative sides: complexity of auto-balancing, elevated weight, one-type appearance (It is possible to modify caps or paint coating), low corrosion resistance.

Alloy products are modern and more popular, their composition includes aluminum and magnesium alloys. According to the method of production, they are divided into cast, forged, combined, titanium.

When choosing cast copies, pay attention to the metal, which is part of the alloy: magnesium - lighter by weight, but with reduced strength; Aluminum - to a lesser extent susceptible to cracking. So what products are most suitable for Lada Kalina ? Each driver strives for maximum safety on the road. When choosing disks, the condition of the coatings should be analyzed by which the car will be operated and the style of its driving.

The advantages of steel disks - in an attractive value. In addition, it is possible to recover after deformation. When hit, they do not split, and fright, the parts of the suspension and steering control are minimally damaged.

Alloy wheels on Kalina have such advantages.

1. A wide range of diverse models. Additionally, it is possible to paint.
2. Low weight increases the dynamic suspension parameters, which increases driving safety.
3. The best indicators of heat dissipation from brake nodes.

In Europe, more popular alloy wheels. On the russian market, due to the quality of roads, most drivers choose steel or wrought.

Often, the owners of Lada Kalina are wondering, and what discs and tires fit on this car? In this case, the manufacturer has provided an answer to such a question and amounted to a list. possible options Installations on Kalina different disk and tires. But, also a big role plays a breakdown.

According to the manufacturer's manufacturer data on Lada Kalina, you can set three sizes of tires. It depends on the year of the car. So, consider what existing options for installing tires in Lada Kalina:

1. The most common size size is - 175/70R13 . it standard size "Zhigulevsky" tires, which takes its history from the "classics".
2. The second most popular size on the vase, but the most commonly found in Lada Kalina - 175/65R14.
3. The third standard version of the tire size is - 185/65R15.

Standard Wheels in Lada Kalina in Suite (6.0 × 15 4 * 98 ET 35 DIA58,6

All other volumes of tire size are not standard and are not recommended for installation on Lada Kalina.

Visual Tire Applicability Table on Kalina

Visual tire size selection table for Lada Kalina

Disc size

There are two options for installing disks to Lada Kalina according to the technical documentation:

• 5,5х14

  Wheel disk 5.5 * 14 * 98

• 6,5х15

  Standard wheels R15

  Appearance on the 15th discs

To install other discs, you will have to replace some pendant and control details.

Tool and possible options

The breakdown is the fastening of the wheel to the hub using bolts or special studs. Simply put, this is the size of automotive "shoes".

Wheel disk on Kalina with a breakdown 4 * 98

For all generations of Lada, Valina is a standard 4x98, although there were experiments when part of the cars came from the conveyor with a non-standard parameter - 4x100.

conclusions

When selecting tires and drives Lada Kalina, all parameters should be taken into account. For proper Installation First, discs are selected with the appropriate size and breaking and only under them tires. On the contrary, it will look much more difficult. Replacing disks and tires is easily in the garage or on a tire terminal. After installing new items, it is necessary to make trouble-convergence to prevent elevated wear.

Each owner of Lada Kalina Sooner or later faces the need to replace wheels. When I want to give an exterior of my "horse" a more attractive appearance, then it is necessary to look at cast options for products. How practical is it? We will try to answer this question that concerns the huge army of the owners of the Russian products automotive IndustryIt is also important to know that if you put other wheels, it will take a break. We will also figure out: what aspects you need to concentrate an increased degree of attention when choosing, and which better size tires

Full discs and their parameters

Representatives of the first generation of Lada Kalina were completed with stamped versions of discs with a dimension of 13-14 inches. Then the light saw easily alloy options. They possess a diameter of 14 inches.

When the owners are obviously seeking to reduce the tire profile, they immediately give themselves to the desire to install a larger size of the disks. For viburnum, you can apply 15-inch options, which makes the manufacturer in its sports modifications, the other options will need a breakdown.

All body versions of Lada Kalina in the first generation (2003-2014), starting with civil and ending with sports versions, completed the list below for the disk producer:

• products "5J" on "13 ET40"; They applies the size of the wheels "175x70xR13";
• "5.5J" to "14 Et37", to them the manufacturer addresses the tires "175x65xR14";
• variants "6J" on "14 Et37" has the size of the wheels "185x60xR14";
• discs "6.5J" on "15 ET35", with them perfectly combined the size of the wheel "195x50xR15";
• "Ranks" "6.5J" on "16 Et45"; Everything is serious here, because the size of the 195x45xR16 tires turns the Lada Kalina bus in real "lapties".

Body modifications domestic model In the second generation (after 2014), such options of disks and others like the size of the tires were honored:

• "5.5J" on "14 ET35", where we find the tires "175x65xR14";
• go to the options "6J" to "14 Et35"; They imply cooperation with Tires "185x60xR14";
• versions of products "6J at 15 ET35", Rubber "185x55xR15";
• "6.5J" disks on "15 ET35", with them "work" the tires "195x50xR15";
• flagships "6.5J" on "16 ET35"; Such disks "not a shame to shift" in the tire, and the dimension of the 195x45xR16 tires.

Interesting moment! Versions "Norm" and "Standard", which manufacturer produced throughout the entire time on the conveyor of the second generation of Kalina, are deprived of regular alloy products. Luxahovah Lada Kalina is able to please his buyer with such options disks, especially since the developers here provided the choice between "R14" and more solid versions of "R15".

What drives will suit alternative to the staffing versions?

It is time to change the "native" wheels. Here the main thing is not to overdo it, but to choose products that are as similar to constructive and geometric aspects with regular options. Note that the parameters of the wheels "anyway", which body in front of them (sedan or pr.).

For proper selection It will be necessary to imbued with such valuable knowledge as:

• the quantitative composition of the holes for fastening bolts and the circle diameter, the conventional line of which passes through the centers of the specified holes ("LZ * PCD", for viburnum - "4 * 98");
• diameter of the central opening of the disc ("Dia"); For the disks of this model, it is 58.6 mm (coincides with the hub diameter with admission);
• the magnitude of the departure (or "ET"), which varies in the values \u200b\u200b(specify later).

Here are summarizing.

1. First generation Lada Kalina. Performances "1117", "1118" and "1119" can be equipped with versions of discs from 13 to 16 inches with such parameters:

• breakdown - 4 * 98;
• width - from 5 to 6.5 (inches);
• departure - from 25 to 35.

2. The second generation "2192" and "2194" will be content with discs from 14 to 16 inches with characteristics:

• "LZ * PCD" similar parameter (4 * 98);
• width - from 5.5 to 6.5;
• departure: 25 - 35;
• the diameter of the opening is an identical value of 58.6 mm.

It should be remembered that correctly selected discs will allow you to achieve traffic safety, moderate fuel consumption, as well as raise the suspension resource.

Stamped and cast: What better?

According to the production method, the disks for Lada Kalina are divided into two global categories: stamped (from steel sheet) and alloy (forged, cast or combined).

For the first option, the manufacture implies welding of individual structural elements of the product. The technology is characterized by simplicity, which is positively reflected in the cost of the disks.

Of the advantages of "stamping", we note:

• reliability;
• maintainability (tendency to eliminate the seedlings);
• durability.

Negative aspects:

• it is difficult to perform an autobalance;
• considerable weight of products;
• lack of design capability (single-type);
• low corrosion resistance.

Now let's touch all the alloy options. Such discs are more progressive products that are manufactured from light metal alloys, such as magnesium and aluminum, etc.

If magnesium dominates, the discs have a light weight, but the strength properties of this option are far from ideal. Aluminum gives product strength and fluidity. This is expressed in good sustainability of cracking during shock loads. It is also likely to break the wheels.

To give preference to any of these options, we recommend specifying the exemplary analysis of the condition of the roads, which will be driving your Lada Kalina in the future.

The advantages of "casting":

• availability of a wide range of models;
• low weight, which positively affects manageability and dynamics;
• a good heat removal generated by brake nodes.

Let's summarize

What type of products to give your preference, what will the size of the disks, and what will be the dimension of the tires - the choice of each owner individually. Having read the constructive and operational features of each of the types of discs, as well as considering the advantages and negative aspects, the buyer will not be easy to decide on the only right choice, also the owner of the car should know what a breakdown.