The Lada Vesta car is a domestic sedan released by the Factory of Aathovaz in 2015. Unlike standard tires and discs, the size of which did not exceed R13-R14, the wheels were installed on this model, the parameters of which were reached R16-R17. It is very important to know, especially for lovers of cast discs.

Tires Lada Vesta

The first modifications of the car Lada Vesta.Massed in a pair with R15 wheels, but after some time of operation, the developers of this model decided to slightly increase the size of the factory discs and tires to R16-R17. This is directly connected with an increase in the resistance of the car on the road, and the improvement of its manageability. Also, there was a variant of Lada Vesta "Concept", on which the size of the wheels reached R18.

Regardless of the configuration of the model, the quality of the tire remains the best, so the difference in controllability on different modifications Lada Vesta is practically no significant. During the creation of this model, AvtoVAZ engineers turned for help to Belarusians, to obtain the highest quality tires, under famous title "Belshina".

From the moment on the car Lada Vesta, the installation of Belarusian tires was made, the parameters of which were as follows: 185/65 / R15. In their type, they treated famous brand "Art Motion". This denotes that before installing the data of the tires on the car, a number of tests prepared by Spanish engineers took place above them.

For a long time of existence, the tires "Belshina" showed themselves pretty well, and when installing them by Lada Vesta, they add a number of the following positive characteristics:

• High level of controllability, wet coating, and by a small water layer. This effect is achieved due to the presence of special arc grooves located on the inside of the tires. When the wheel is found on the puddle, the water will instantly leave from under it, through the data of the grooves.
• The outer side of the tire has several large textured blocks, which allows the Lada Vesta machine to not lose controllability, even with a sharp turn at high speed.
• Very big plus tire data - low level Noise provided by the special design of the protectors.
• High term stability, which is achieved due to the presence of three longitudinal grooves.
• Excellent dynamics of Lada Vesta car, during idle move. Its provides wide convex grooves located along the tires.
• Improved braking that affects the reduction of the brake path.
• And the last, important plus tires "Belshina" is that they have a rather small cost, compared to the rest of the world brands, and very high quality, not inferior in the market.

In addition to the tires "Belshina", on the "luxury" version of Lada Vesta, the tires of German production are established, from the company "Continental", which occupies a 4th position among world tire manufacturers in the world.

The size of such tires and disks - 195/55 / \u200b\u200bR16. They refer to the category "Eco Contact" and have the same good characteristicslike "Belshina".

Drives Lada Vesta

In the factory version of the car Lada Vesta, installed alloy wheels, the size of which is R16 and R17. These discs are manufactured by the company to & k, which leads now on all russian market. It manufactures alloy wheels R16 and R17 for cars, including Lada Vesta, injection molding.

In the "luxury" version of Lada Vesta, two variants of the disks are envisaged, the dimensions of which are R16 and R17:

• K & to Anna 15 6x15 4x100 Dia 60 Es 50;
• K & to Ptalomey 16 6x16 4x100 Dia 60 em 50.

For an additional charge, the third version of the West can be installed on the Lada Vesta car: K & to Ptalomey 17 6x17 4x100 DIA 60 Es 50. By type, they are the same as previous options - cast. But the size of them is somewhat different, which positively affects the resistance of the car.

After the purchase models Lada. Vesta, many people have a desire to replace standard alloy wheels on alternatives having the same size, but absolutely different design. In this case, recommended by parameters, wheels for Lada Vesta will be:

• Discs R16, 175/70 and 205/60;
• Discs R17 175/55 and 195/50;
• Tires whose size will be exclusively R16 and R17, respectively.

As for the discs for the Lada Vesta concept version, their size should be R18 235/4. Such a wheel is significantly different from the other versions of Lada Vesta, due to its large diameter - 668.7 mm. On the concept version, disks with the size R17 will not fit.

All recommendations, data in this article relate to summer tires. But when choosing winter rubber, owners Lada. Vesta will definitely face a number of problems. For example, on this model Narrow wheels are most suitable, as they are more resistant on slippery surface, rather than a wide variant.

For any car owner, it is important to know how to choose the right tires for the Vesta Lada. From this will depend on the resistance of the car on the road, handling and safety of motion. For anyone vehicle The manufacturer specifies the optimal parameters to select the wheels - matching the size of the tires and disks. The list includes the type of rubber, depending on which conditions will be operated.

Specifications

For the Vesti Lada, it is planned to set the wheels with a diameter R16 and R17. At the preceding models (grant, Kalina), a smaller bus was installed from the factory, no more than R14. Initially, the manufacturer put the producer with a diameter of R15, but not so long ago, it was decided to abandon them in favor of increasing the stability and manageability of the car.

Characteristics of regular rubber

AvtoVAZ uses the tires of the Belarusian manufacturer "Belshina", whose feature is that they are designed for Vesti, are characterized by good quality. By variety, these tires belong to the Art Motion brand. This means that the products undergo a mandatory test procedure based on the EU standards. This rubber has proven its quality in practice, demonstrating a lot of advantages:

1. A high level of controllability, regardless of the coating condition. An additional diverse of water on the wet asphalt contributes to the grooves in the form of an arc from the inside.
2. With the outside of the tires are placed special blocks designed to increase steep stability.
3. The protector provides minimal noise when driving.
4. For saving currency stability 3 grooves respond in the longitudinal direction.
5. Performance improves maximum speed, Fuel consumption drops due to a small rolling resistance.
6. Decreases braking distances Due to increased coupling qualities.
7. Not bad quality at a relatively low price compared to foreign counterparts.

In the maximum configuration "Lux" Vesta, and in the middle configuration and weight of the cross, equipped with a German manufacturer of the German producer 195/55 / \u200b\u200bR16.

In the basic configuration, stamped discs 6J 15 ET 50 4 × 100 60.1 are put on the car. Deciphered this index so:

• 6j - rim width;
• 15 - the diameter of the landing in inches;
• ET50 - Wheel departure - 50 mm;
• 4x100 - 4 fastening bolts, the diameter of their location is 100 mm. This is a breakdown parameter in Lada West. Installing disks from previous models is not allowed, they are used to break 4x98 - boring and fitting will lead to biotes when driving, vibration;
• 1 - hole diameter in the center.

These discs put tires with a sizer of 195/55 R16 91H. The ratio of wheel size and disks is presented in the table:

Index T - speed mode Until 190 km / h, n - up to 210 km / h. Figures from 88 to 91 are lifting indices from 560 to 615 kg.

Know how to check the tire pressure, should every motorist. If it is weak, the wheel will come into contact with the road surface with a smaller area, coupling qualities, manageability deteriorate. If the pressure is too large, the tire becomes too tough dynamic characteristics Fall, the details of the suspension wear out faster.

The manufacturer recommends maintaining pressure in Lada Vesta tires equal to 2.1 atmospheres. Experienced drivers Trying to adjust the indicator yourself depending on the driving style. To believe the pressure, a pressure gauge is needed. It is sold at any auto parts store. You can contact the car service where the pressure will be tested, pushing the wheels if necessary, they will be tested for the presence of punctures.

Installation of wheels with an enlarged size

Tires of increased diameter can radically change appearanceand also affect dynamic characteristics, manageability, stability. Drives more than the manufacturer recommends, size changes these indicators not for the better. Installing enlarged disks will require low profile tire mounting. This is due to outside diameter Wheels in Lada West can not be more declared by the plant, otherwise they will not be banal to fit in the arches or they will be straightened on the nodes and turns.

The maximum allowable diameter is R18, with an external tire diameter of 670 mm and a width of 235 mm. Rubber of such wheels is low-profile and significantly different from the standard. Given the features of domestic roads, the installation of such wheels does not carry practical benefits, their cost is higher, but they wear out faster.

To summarize advantages and disadvantages as follows:

• the appearance becomes more effectively;
• increasing dynamic characteristics (profile at least 55%);
• strengthening the return of the steering;
• improvement of the functionality of the system of course stability and anti-lock system;
• reducing the brake path.

Comfort driving with such disks is noticeably lower, it is required to constantly control the pressure in the tires, the fuel consumption increases.

Select rubber for different operating conditions

Winter becomes for car enthusiasts of a real headache, some prefer not to use cars during this period, the rest have to buy winter tires. It is impossible to ride in the cold season on summer tires - their composition is not designed for low temperatures. Brake, start of movement, ride becomes impossible.

Selection of winter rubber

A large-sized tires can be installed on Vesta, but it is better to put a smaller wheel for the winter. If R16 is used in the summer, then R15 is recommended for the winter. The width of the rubber is also chosen less. In winter, high-speed characteristics are not so important. The market presents the studded tires and the so-called "velcro". It is ideal for residents of large cities, rarely leaving off-road. No spikes are needed on asphalt roads. For those who are often moving on snow-covered, iced roads, they are definitely necessary.

Selection of tread pattern

Types of drawing happens three:

Picture of tire tread

1. Symmetric. Both sides of the figure are the same, has a waveform or jumpers. Equally effective in the snow and ice. Loses its properties on the snow kashek in spring or after processing with reagents.
2. Directed. Not afraid of snow, ice, and also does not lose its properties on the snowy caress. Not suitable for use on dry asphalt due to increased noise. The peculiarity of these tires in the direction - they need to be mounted strictly by the direction of the direction of movement, which is indicated on the side outer side of the product with the inscription "Rotation".
3. Asymmetric. In addition to all the advantages of the described drawings, noise reduction and high speed characteristics are added. It is installed on the marks indicating the inner and outer side with inscriptions on the sides - "Inside" / "Outside". The only drawback is a high price.

For the purpose of saving, you can use the directional option. If the budget allows, it is better to choose an associated pattern.

Selection of spikes

The usual spike looks like a nail - this is the most common view. There are other forms - a square, a rectangle. At the same time, at a speed of up to 60 km / h, the braking path does not change in any way, but it makes no sense to pay, because in the winter to raise the speed is unsafe. From popular brands you can choose the following:

• Nokian Hakkapeliitta 8 - is located on average price range, approximate cost from 4 to 5 thousand rubles;
• Bridgestone BLIZZAK SPIKE-01 - from 3 thousand rubles;
• Yokohama Ice Guard F700Z - average price - 2 thousand rubles;
• Dunlop Ice Touch - the average price is 2.7 thousand rubles;
• Michelin. X-Ice North 3 - 3-3.5 thousand rubles;
• "Kama Euro" 519 and "Belshina" Bel-127 - up to 2 thousand rubles.

The choice is large, for high quality and brand will have to pay a solid amount. If the budget is limited, you can buy tires for the winter of domestic production. They are cheaper, but this does not mean that their quality and efficacy is worse.

Selection of summer tires

Summer tires for cars is made of solid compounds, which is determined by temperature and high-speed operating conditions. These tires wear out more slowly, there are no coupped qualities on a split asphalt. Such wheels have a different from winter Figure and the depth of the tread.

Tire size

Choose a size that meets the requirements of the manufacturer. It is allowed to use alternative optionsBut in this regard, one should consider different points:

1. If the outer diameter of the wheel is greater than the manufacturer allows, it will be cling to the arch during the turns of irregularities.
2. When installing tires with a large width, friction will also be observed on the arms, which is unsafe and leads to fast wear rubber.
3. Installing a low profile rubber will make the suspension too hard, which will lead to the failure of the elements of the chassis. But low-profile rubber increases the sensitivity of the steering, allowing you to better control the car when driving at high speeds. For riding on the roads of domestic production, this is not the best option.
4. An overly high profile reduces control efficiency, high speed is the risk of losing the tire from the disk, which will lead to an accident. Properly selected tires with a high profile increases the smoothness of movement, it easily swallows all the pits and bumps, can save the resource of the suspension.

Summer tires in Lada Vesve should be wider (within reasonable limits), it increases the spook of contact with the road surface, improves dynamic characteristics. But this will lead to an increase in fuel consumption and risk of aquaplaning even at low speed when the passage of puddles. Based on this, it can be concluded that when choosing a type of tires, a lot of factors should be taken into account. In most cases, it is desirable to stay on a sizernary, which recommends the manufacturer. For the average car driver in the city mode of this enough.

Choosing a tread

According to the type of drawing there are symmetric, associated and directed protectors. An inexpensive option is a standard tire with an infinite picture. It has average controllability, comfort and prevention of aquaplaning. By the ratio of "price-quality" for leisurely trips will be optimal option. If necessary, the tires can be put on different directions.

Rubber with directional pattern has higher indicators of controllability, comfort and avasplain prevention. One of the advantages of such a picture is a quick conclusion of water from the tread. Mounted in accordance with the direction of movement, so they cannot be mounted differently when the wheels are permutive between the right and left side. Otherwise, control safety is dramatically reduced.

Rubber with asymmetric tread pattern - a universal version with the same good indicators Controlness and comfort on various road surfaces. The outer part consists of increased and more hard blocks that increase controllability on turns. The tread pattern on the inside consists of smaller blocks, more efficiently removes water, increasing coupling qualities on wet asphalt. To provide a course stability in the middle there is a longitudinal edge edge. Such wheels are allowed to rearrange on one side to another. The only drawback is a high price compared to tires with directional and non-directional pattern.

From popular grades of summer tires for Lada Vesta, you can allocate:

• TRIANGLE GROUP TR928 - the cost does not exceed 2.5 thousand rubles;
• Nokian Nordman SX2 - from 3 thousand rubles;
• Michelin Energy XM2 - from 3.5 thousand rubles;
• Yokohama Geolandar SUV G055 - from 7 thousand rubles;
• Hankook Ventus V12 EVO2 K12 - from 8 thousand rubles.

Most affordable option - These are the tires "Kama Euro" and "Belshina", the cost of which usually does not exceed 2 thousand rubles per tire.

One of the important parameters of any machine is the wheel size. After all, it is this characteristic not only defines an attractive appearance, but also directly dictates how much the car will be convenient to control, affects its dynamic indicators, as well as on the permeability. Below will show the main sizes of tires for Lada Vesta, which has already managed to earn popularity from our motorists.

Original tires

As you know, the composition of any wheel includes a tire and wheel drive. And they may be different sizes. The manufacturer of "Vesti" sets the following size for wheels of his new car (I mean the most simple complete set): 185/65, and this is at a radius 15. The indices of other indicators are 88h or 88t.

All of these wise figures displays the following parameters:

• Width, mm: 185.
• Profitability: 65 percent of the width ((185/100) * 65).
• Discs, radius: 15 '.
• 88: Maximum weight of 560 kilograms.
• H: Speed \u200b\u200bindex (less than or equal to 210 km / h). In the case of t instead of H: less or equal to 190 km / h.

The manufacturer of such wheels is the enterprise "Belshina", and the wheels themselves received the name Artmotion. Products are characterized by sufficient softness of rubber, which has good endurance along with an excellent clutch of the road and a low noise level. An option for the cold season is called Artmiton Snow.

On the most low-cost equipment "Vesta" tires are installed on steel stamping. The dimension of these discs is as follows: 6J15T504х10060.1. Alternatively, it can be installed alloy with the same parameters. Such discs produce K & K enterprise, and the Disk Model is called Anna-15.

The above dimension is decrypted as follows:

• 6J: Width Width (6 'here).
• 15: Installation diameter (15 'here).
• ET50: departure (here 50 mm).
• 4x100 (diameter of the circle of the centers of mounting holes or PCD). Installation is performed on 4 bolts that are 100 mm in a circle. Sometimes such a parameter is called a breakdown.
• 1: Plant diameter of the disk hub (DIA).

The richest configurations of "Lada Vesta" The manufacturer equips the following sizes: 195/55r1691n or 195/55R1691T..

Decrypt these numbers:

• Width, mm: 195.
• Profile height: 107.25 mm, which is 55% of 195.
• R16: Width of the disk in (16 'here).
• 91: Loading rate (for figures 91 it is 615 kg).
• H: The speed indicator (less than or equal to 210 km / h, in the case of T: less or equal to 190 km / h).

Such tires for autohydigant produces a German enterprise Continental. The model is called Ecocontact. However, alloy wheels are not made by Continental, but K & K (the Disk Model is called Ptalomey 16). Disks have dimensional data 6JX16ET504X10060.1. In fact, they differ only in the size of the landing, it is 16 inches.

However, the most inexpensive lada configuration Vesta can be installed like wheels and the same discs - truth, as an optional feature.

The car in the LUXE version for individual money can also be equipped with wheels (moreover with 17-discs) of a similar model of the same manufacturer: Ptalomey 17. Below in the table you can see the sizes of wheels for Lada Vesta:

Additional sizes

Many motorists mount discs and tires of different dimensions on their car, moreover, for various reasons: it can be repairs after an accident or simply modification. Let us try more detail in adequate mounted options on Lada Vesta tires and disks of an abnormal size. We will also consider the advantages and disadvantages of this operation, as well as the consequences of possible installations that are promising serious losses in the operating parameters. separate nodes and aggregates (including early breakdowns).

If the car owner just decided to change the tires on his car (without resizing), there is nothing terrible in this. But in this case, it is necessary to ensure that all tires contain the same protector, as well as equal to the degree of wear (at the same time, the tread is allowed to differ only for the front and rear axles).

Drives from other "Lada" will not fit

Machines having a size of 185/55 radius 15 (Recall that these are products of the plant under the names of "Kalina", "grant" and "prior") have not such a size, like the "Vesti", although the cavity and look like the same. The fact is that the landing wheel diameter of the above models of machines 1.6 mm less (it is 58.5 mm).

If you try using a turning force to fix this hole to the desired size, in any case, the PCD indicator for such discs will not be 4x100, but 4x98, as a result you will receive three bolts of fastening, absolutely not matching with the mounting holes. As a result, the cooality of the disk and the hub will be broken, and the movement of the car will be accompanied by beating.

Enlarged disks

Such discs do not simply change the appearance of the machine, dynamic indicators, control, stabilization during driving are also dependent. Often all this data when replacing larger disks change for the worse.

If you are interested in this installation, always remember that the increase in the disk certainly promises the choice of other tires (necessarily smaller profile). The fact is that the external tire diameter in any case cannot be more recommended by the manufacturer (do not forget about the arches of the wheel), otherwise the tires will be scratching around the arms (especially on turns), and this, as you understand, is completely good.

During 12-month tests on car Lada. Vesta successfully installed the following sizes:

• Radius 15 - 175/70 and 205/60.
• Radius 16 - 185/60.
• Radius 17 - 175/55 and 195/50.

Note that the discs of diameters 17 'were put on the test modifications Vesta. In principle, 18-inch discs are allowed to mount on the car, but the external diameter of this tire is almost 670 mm, the width is 235 mm. These parameters differ greatly from the plant recommended by the plant, and, despite the formal possibility of installation, real domestic roads will not give such tires to ride normally (low-profile tires) - road irregularities will quickly spoil the wheels - we note, at their price, several times higher than the original.

Benefits of mounting large disks:

• Visual effect, the car is becoming more fashionable.
• Increase dynamic properties, road stability, return of the steering system.
• Little response from road element.
• Lean attitude to the suspension resource (with a profile of at least 55%).
• Reducing the distance when braking.
• Improved functioning eSP systems, ABS.
• Reducing braking length;

Disadvantages of mounting large disks:

• Lack of convenience when moving (large transmission to the cabin and on the wheel of damage to the roadbed).
• Unwanted riding in bad roads.
• Increased control over tires.
• Increased fuel consumption due to the need for increased energy consumption when attacking.
• High price.

Pressure

Many beginners do not take into account the pressure in the wheels, but, between those, it is extremely important - and this applies not only to low-profile, but in general any tires. The magnitude of this indicator is necessarily written by the manufacturer in the manual for working with the machine, as well as on the body in an affordable place. In particular, for Lada Vesta, such a mark has a central rack from the driver's side.

The list of main characteristics of the car includes both the dimension of the tires, since this parameter is not only an exterior element, but also a factor affecting the controllability, dynamics and passability of the machine. Consider the size of the wheel of the Sedana Lada Vesta, which is increasingly and more common on the roads.

Wheels of the regular equipment

The wheel of the car consists of a disk and tires that have individual characteristics.

Concern AvtoVAZ Indicates the standard dimension of Lada Vesta tires in the basic configuration - 185/65 / R15 88 N (the manufacturer is allowed to use T). It means:

• width - 185 mm;
• profile - 65% of 185 mm (120.25 mm);
• mounted bus must be with a diameter of 15 inches;
• 88 - Lifting index 560 kg;
• N is a speed index, up to 210 km / h (for T - up to 190 km / h).

Such artmotion name tires for AvtoVAZ are manufactured at OJSC "Belshina", products are distinguished by moderate softness and good wear resistance of rubber, low noise and excellent retaining of the road linen. Tires with identical characteristics of OJSC "Belshina" also produces in winter design - model Artmotion Snow.

IN basic equipment Lada Vesta These tires are mounted on steel stamped wheel drives of dimension 6J 15 em 50 4x100 60.1 (as an option - the alloy the same dimensions of the ANNA-15 model from the K & K manufacturer), which means:

• 6J - the width of the rim of the disk (6 inches);
• 15 - mounted diameter in inches;
• Et 50 - departure of 50 mm;
• 4x100 (PCD, breakdown) - the disk is attached with 4 bolts located around the circle with a diameter of 100 mm;
• 60.1 (DIA) - the size of the central (hub) hole.

On the top equipment Lada Vesta Plant Sets the wheels dimension 195/55 R16 91 N (allowed T):

• width - 195 mm;
• profile height - 107.25 mm (55% of 195);
• R16 (mounting disk diameter) - 16 inches;
• 91 (lifting index) - 615 kg;
• H (speed index) - up to 210 km / h (it is allowed to 190 km / h).

These tires of the Ecocontact AvtoVAZ model supplies the German company Continental. They are mounted on the alloy wheels of K & K models of the PTalomey-16 model 6JX16 ET50 4x100 60.1, whose geometrical characteristics differ only in the mounting diameter - 16 inches.

On the basic versions of Lada Vesta Installing the wheels of such dimensions on alloy disks K & K as an additional option is also possible.

In the Luxe configuration to Lada Vesta for an additional fee, it is planned to install the wheels even with 17-inch discs of the same model - Ptalomey-17.

For clarity, we will reduce the correspondence of the sizes of tires and disks of Lada Vesta in the table.

Alternative Dimension Wheels for Lada Vesta

Installation of wheels of another dimension on the car - the situation is frequent, and the reasons for this can be different - from the restoration of the car after an accident before tuning. Consider common acceptable installation options on Lada Vesta Wheels non-standard, pros and cons of this procedure, as well as errors that are fraught with the deterioration of the characteristics of the car and even a premature way out of the order of some nodes.

The situation when the motorist decided without replacing the disks "rebuild" his car into new tires of standard dimension, but made by another manufacturer, no special comments require. However, there are rules here: all tires must have the same tread profile or equal degree of its wear (the difference in the front and rear axle pairs of tire panel) is allowed.

Unfortunate disks of other models Lada line

The wheels of the dimension 185/55 / \u200b\u200bR15 from the AvtoVAZ models of Grant, Priora and "Kalina" cannot be installed on Lada Vesta, at least at first glance and seem suitable. Hub hole diameter wheels These cars are 58.5 mm, that is, less than 1.6 mm.

But even if this hole crowded on turning machine Up to the desired size, breaking (PCD) of these products is 4x98, and not 4x100, and 3 fastening bolts of four will not be placentated relative to the mounting holes, respectively, the disk will not be coaxed, and its rotation will be accompanied by a beyon.

Installing larger diameter disks

The large-term discs not only change the appearance of the car, but also affect its dynamics, maneuverability, stability on the highway, and not always for the better.

When making a decision on their installation, you should know the basic principle - the larger the diameter of the disk, the less the height of the tire profile, because the magnitude of the outer diameter of the wheel is tied to the size of the wheel arch - when the tire turns, it should not hurt anything and driving on everything Rotation range.

Testing Lada Vesta during the year showed acceptable variants of the dimension of the wheels:

• tires for disks R15:

• tires for R16: 185/60 R16.

• tires for R17:

17-inch discs were installed on the concept of Lada Vesta. Technically, this sedan can also be installed on R18, but the outer diameter of this wheel (669 mm), as well as the width of the tire (235 mm), differ significantly from factory values \u200b\u200band in real conditions russian roads Because of a low profile cannot be considered as practical - road surface defects will quickly disable the tires, and the discs, the price of which due to the dimension at times exceeds the cost of regular.

Influence on car Wheels with a disc large diameter and low-profile bus

Positive:

• improving the style of the car, the effects of the exterior;
• improvement of "driving" qualities - dynamics, sustainability on the road, steering sensitivity;
• the best "absorption" is elected compared to the smaller radius;
• under the bus profile from 55 - increase the durability of the suspension;
• reducing the length of the braking path;
• improving the efficiency of ABS and ESP.

Negative:

• inconsphicity of driving due to sensitivity to road surface defects;
• restriction of operation on roads with defective coating;
• the need for increased pressure control;
• a big need for kinetic energy at the start - fuel consumption above;
• higher cost.

Low profile tire pressure

This parameter, ignored by novice motorists, is very important during the operation of cars with any tires, and with low-profile - especially. The required magnitude of the tire pressure is always indicated by the car manufacturer in the operating instructions and in an affordable location on the body, the Lada Vesta - on the middle body side of the driver.

Low profile tires require increased attention to pressure, as its insufficient value will make wheels and suspension are even more vulnerable to choosee and stones on the road.

As many years of experience is shown, the pressure in low profile tires must be maintained by 15% higher than indicated by the manufacturer for wheels of the recommended dimension.

How to choose discs for Lada Vesta

In addition to the main sizes of tires and disks that clearly declare their suitability or unsuitability for Lada Vesta, there are other parameters and nuances, whose ignoring when choosing is fraught subsequently with trouble.

Departure disk

This parameter (em) is a responsible characteristic, and when buying is better to be guided by the value of the vehicle manufacturer.

Installation of wide wheels with a reduced value increases the vehicle stability, but increases the load on hub bearings, the consequences of the destruction of which are unpredictable on the go.

Reducing the departure is allowed no more than 5-7 mm.

PCD Parameter

This value (breakdown) when selecting new disks should be respected absolutely. If the PCD marking is different from the value specified in the instruction manual, install discs will not be possible.

Hub hole diameter (D)

Some manufacturers produce wheels with an inflated value of the hole diameter under the hub - this circumstance allows them to use them by applying special inserts - centering rings on many models of cars. Therefore, the larger diameter of the hole under the hub is an easily solvable problem, unlike the opposite situation, when the hole is not enough.

And nevertheless, the situation is common when the bolted attachment to the motorist seems enough, and the use of centering rings neglected. In this case, at speeds above 100 km / hour, the wheel beating begins, to diagnose which is difficult, and follow the meaningless costs of balancing.

Width rim

This parameter is important when choosing discs for already existing tires - the use of excessively narrow or, on the contrary, wide disks distorts the geometry of the contact plane of the tire with a road surface and worsens the dynamic characteristics of the car. In addition, when driving through the snow or soil, wide tires are slipped due to low specific pressure on the road, so choosing the size of the tires and disks, this factor should be taken into account.

Conclusion

Replacing the wheels of the regular dimension to alternatives should be well thought out by a car owner. It is not enough to proceed from the considerations of stylishness and even improve the characteristics of the car. Choosing a new dimension discs, it should be remembered that now, taking into account the existing wheels, you will have to choose and roads.

November 23, 2015

Cast and stamped discs summer tires In Lada Vesta - characteristics and sizes, what to buy?

Replacing tires and disks on Lada Vesta should be made only in accordance with the table, where the permissible sizes are presented. In addition, when replacing, it should be guided by the recommendations from AvtoVAZ existing in the manual.

Content


• Wheel parameters on Lada Vesta

  Acquisition of new tires and disks for domestic model Lada Vesta is a responsible event, as it is from them that the car handling will largely depend on. Consequently, only products with recommended AvtoVAZ characteristics can be set on Vesta. That is why when replacing, it is necessary not only to navigate the table existing in the manual, but also to fulfill the manufacturer's recommendations.

  Table permissible for Lada Vesta Tire sizes, disks, as well as tire pressure:

  Tire dimension with load capacity and speed indexes	Dual dimension		Air pressure in front / back tires, MPa (kgf / cm 3)
  	rim width (in inches)	ride departure (em) .mm
  Installed by the manufacturer
  	6J.	50		0,2/0,22(2.1/2,1)
  Allowed to be installed during operation
  185/65 R15 88T, n 195/55 R16 87, 91T, H	5J, 5 1/2 J, 6J, 5 1/2 J, 6J	50	0.21/0.21 (2.1/2.1)	0.21/0.21(2,1/2,1)

  Number of holes - 4; The diameter of the location of the centers of the mounting holes on wheel disk - 100mm.
  * Speed \u200b\u200bindices - T (up to 190 km / h) and p (up to 210 km / h). Loading indexes - from 88 to 560 kg and from 91 to 615 kg.

  * Et (Rim departure) is the distance measured from the plane of the disk (valve) to the middle of the rim.

  *** Partial load - denotes the presence of three adults in the cabin, but without cargo in luggage compartment.

  **** Full load - denotes the presence of over three adults in cars, or three adults and boosted in the luggage compartment weighing 50 or more.

  For Lada Vesta AvtoVAZ admits the installation of winter tire ties M and S with the dimensions specified earlier, the speed limiter is up to 160 km / h, as well as the index Q.

  Which wheels to buy for Lada Vesta?

  Selection of disks

  Choose your favorite disk and click try or buy. All presented disc models coincide in size with factory recommendations.

  R15 - Stamped Disk

  R15 - Beautiful alloy wheels for Vesta at 15

  R16 - Beautiful alloy wheels on 16 under Lada Vesta

  Pressure calibration - for this it is used a pressure gauge. Pressure parameters are also indicated in the table. AvtoVAZ warns from the operation of the machine with pressure in the tires, which differs from the written in the manual for Vest. With such rubber, the handling and stability of the Vesti deteriorates, and the wear of the tires is accelerated. In any case, it is necessary to inspect the spool on the subject of possible air leakage. If the reason in it, it is required to replace or at least trust. In the absence of such, but when air bleed from the tire, it is recommended to refer to the corporate station, where the tire will be repaired.

  

  To check the tire pressure, use the pressure gauge.

  Working - it should be done either at the Lada dealer, or with the use of special equipment. It is necessary not to disturb the sealing layer of the tire. In the work it is extremely important not to unbalance the wheel, for which it will be necessary through the shame to make a mark on the tire (opposite the valve), and when the back assembly is focused on this label. Also, the installation of new tires implies the mandatory balancing of Lada Vesta wheels at the dealer station.

  

  Wheel balancing is performed at the station with the appropriate equipment.

  Wear - so that it is uniform, it is required to periodically rearrange the wheels on the axes, as indicated in the manual.

  

  Wheel permutation scheme to Lada Vesta.

  Riding - In motion, it is recommended to be careful. It is not necessary to quickly go on the road with a bad coating (pita, in the influx of asphalt, etc. Defects). In addition, during parking it is worth avoiding the wipes of wheels about border stones. All this can provoke an imbalance and disrupt tire tires (tubeless) Lada Vesta. To the dealer or on the branded station must be sent immediately if the vibration begins to occur while driving.

  

  Fast ride on poor-quality road surface is invalid.

  The process of replacing the wheels on Lada Vesta

  To begin with, it will be necessary to prepare for work. First, Vesta must be parked on a flat site and qualitatively fix the car by putting it on parking brake, With the first transmission at the same time. After that, you can get from the luggage compartment the spare parts and the necessary toolkit.

  If Vesta "shod" in stamped discs, it will take carefully to remove the caps. Next, you need to weaken the tightening of all the bolts of the changing wheel, after which you can install a jack (the place is noted for it). When installing the jack, it is necessary to ensure that its foot is located accurately under the emphasis, and the excavation existing in his stop was in the rib of the threshold.

  

  First, you will need to remove the cap, and then weaken the bolts that are fixed by the West Wheel.

  After that, you can lift Lada Vesta by 50-60 mm. Next, the bolts are unscrewed completely, the wheel is removed, the spare place is installed in its place, and the bolts are fed again. Then it is necessary to omit Vesta back, remove the jack and tighten the bolts with the movement crosswise. If there is a cap, it will be necessary to put on the wheel.

  

  The correct location of the jack under the threshold of Lada Vesta.

  The defective wheel must be put in a niche in the luggage compartment, securely secure it with a screw stop and close the rug. Checking the quality of the tightening bolts must be carried out in 1,000 km after installation. If there is a need, they will be needed to tighten. The same set of actions is carried out with each replacement.

  

  Placement and fixation of the spare wheel in the luggage compartment of Lada Vesta.