Mitsubishi Lancer 9 Which wheels.
To select suitable wheels on Mitsubishi Lancer 9, you can use the Calculators programs on various sites or to trust online store consultants.
But there are no guarantees that the information provided is reliable, and the selected products will comply with the manufacturer's requirements. Therefore, in its choice, you need to navigate the parameters standard disksinstalled on the car by the manufacturer.
Replacing the discs is the first and easiest way to improve the exterior of the car. Options for execution and design Each car owner chooses itself, based on its own preferences and flavors. It is important to adhere to technical characteristicsinstalled by the car manufacturer.
Main settings:
- the landing diameter of the rim is denoted by the letter "D" and is measured in inches. It determines the size of the tires that can be used in the future;
- the width of the rim is denoted by the letter "B" and is measured in inches. It sets the minimum and maximum tire width restrictions;
- the departure is the distance between the plane of the vertical disc symmetry and the surface of the disk adjoining to the hub. This is one of the most important geometric parameters, it is indicated by the labeling "ET" and is measured in millimeters;
- the number of holes for fasteners (breakdown) and the diameter of the circle in millimeters on which the fasteners are located are designated by the "PCD" marking;
- diameter central opening denoted by the letters "DIA" and is measured in millimeters. It must match or be greater than the landing diameter of the hub.
Additionally, alphabetic symbols can be used, most often "j" or "jj", denoting structural features - the shape of the core of the wheels.
Types of disc
All the lineup Mitsubishi Lancer 9 cars have equipped with two types of discs, differing materials and production materials, which is definitely reflected on their qualitative characteristics and operations.
Stamped - made of steel, due to which they have greater weight, and due to the low production accuracy - poorly balanced. When operating, they demonstrate increased impaired, for example, when the wheel enter the pit, and maintainability in the event of a rim deformation. The appearance of all stamped discs is standard, it is possible to modify it by installing decorative caps.
Cast - are made of aluminum or magnesium alloy to reduce weight and increase heat removal from brake mechanism. They are well balancing. When loading loads, such discs can split, which makes them less suitable for repair. Car owners prefer cast discs, Basically, due to their decorative qualities and varieties of designs.
Regular dimensions of discs and rubber
Various modifications Mitsubishi Lancer. 9 was completed with different wheeled discs.
| Parameters | Designation | Model CS1A, Engine Volume 1.3, Body - Sedan | Model CS3A (W), engine volume 1.6, body - sedan / car | Model CS9A (W), Engine Volume 2.0, Body - Sedan / Car | Model CT9A, Engine Volume 2.0t, Body - Sedan |
|---|---|---|---|---|---|
| Diameter | D. | 15” | 6” | 6” | 17” |
| Width | B. | 6” | 6” | 6” | 8” |
| The number of holes for fasteners | - | 4 | 4 | 5 | 5 |
| The diameter of the location of the holes | PCD. | 114.3 mm | 114.3 mm | 114.3 mm | 114.3 mm |
| Type of fastening | - | Nut 12 * 1.5 | Nut 12 * 1.5 | Nut 12 * 1.5 | Nut 12 * 1.5 |
| Departure | Et. | 46 mm | 46 mm | 45 mm | 38 mm |
| The diameter of the central hole | Dia | 67.1 mm | 67.1 mm | 67.1 mm | 67.1 mm |
| Execution options | - | Cast / steel | Cast / steel | Cast | Cast |
Stamped (steel) Discs for Lancer 9 may have smaller values \u200b\u200bof the parameters "Width of the disc" and "removal". Cars of all complete sets were equipped with a stamped spare wheel.
Original tire sizes installed by the manufacturer:
- D15 - 195/60 R15;
- D16 - 195/50 R16;
- D17 - 235/45 R17,
where 195 and 235 - the width of the tire in millimeters, 60, 50 and 45 are the ratio of the height of the rubber profile to its width in percent, and R15, 16 and 17 are the diameter of the tire in inches.
Selection of non-original disks
Mitsubishi Lancer 9 experienced way Picked up various variants of the dimension of wheels that are suitable for trouble-free operation of the car:
- the standard always remains parameter PCD (drilling) - 4 or 5 by 114.3 mm;
- the diameter of the planting hole must be 67.1 mm, if more - the installation of the centering rings will be required;
- departure (ET) is the most important parameter that most often ignore motorists. The value of this parameter without damage to the car can vary from 39 to 48 on disks 15 and 16 radius;
- the value of the disk width is less critical and, if desired, it can be changed in large limits - from 5.5 to 8.5, depending on the rubber installed.
Options non-standard disks and prices for them
| Model | Parameters | Price for 1 disk, rub |
|---|---|---|
| Enkei SH45 | 4x114.3 R15x6.5J ET38 DIA73.1 | 4780 |
| K & K Iguana | 4x114.3 R15x6.5J ET35 DIA67.1 | 3800 |
| Cross Street CR-04 | 5x114.3 R16x6.5J ET38 DIA67.1 | 3700 |
| Enkei S938. | 5x114.3 R16x7J ET45 DIA73.1 | 5960 |
| Enkei SP55 | 5x114.3 R16x7J ET38 DIA67.1 | 5960 |
| K & K Volt | 5x114.3 R16x6.5j ET38 (45) DIA67.1 | 3970 (4330) |
| LE-MANS SCRAD | 5x114.3 R16X7J ET40 DIA67.1 | 4270 |
| 1000 MIGLIA MM1007. | 5x114.3 R17x7.5J ET40 DIA67.1 | 7670 |
| Enkei S939 | 5x114.3 R17x7.5j ET45 DIA67.1 | 7480 |
| iFREE Freman | 5x114.3 R17x7j ET45 DIA67.1 | 4400 |
| VOSSEN CVT-R | 5x114.3 R17x7.5j ET42 DIA67.1 | 5400 |
| Drive Skad | 5x114.3 R17x6.5J ET35-50 67.1 | 4860-5050 |
Consequences of installing incorrect disks
The optimal solution for Lancer 9 will be the selection of disks corresponding to the parameters of the manufacturer installed for a particular vehicle modification. Installation of smaller diameter disks is rare and, often, is simply impossible, due to constructive features brake system.
Larger wheel size - diameter or width, makes appearance Auto more attractive and increases ground clearanceBut during operation you can face some problems:
- Improve speedometer speed readings. To avoid this, you need, increasing the diameter of the disk, reduce the height of the tire profile.
- Increased loads I. accelerated wear All elements of the running system.
- Damage to the car body from excessive pollution and rocks from under wide wheels.
- Restricting maneuverability due to the inability to unscrew the steering wheel in the extreme position.
- Wearing the tunnels when "rubbing" the wheels on the rotations or bodies.
- Reduction currency stability and clarity reaction when turning and maneuvering when installing tires with a high profile.
- The risk of damage to the wheels and the parts of the suspension when entering the pit due to rubber with a low profile.
Not all owners Lancer 9 are aware of the importance right choice Wheel disks and tires. The parameters offered by the Mitsubishi concern are aimed at improving car manageability, an increase in fuel economy, noise reduction when driving. Conducting experiments with the sizes of all components of the wheels, first of all it is necessary to remember the safety of motion, and only then - about the aesthetic component of the car.
Given the greatest solarity of this topic from the car owners, we publish another news on the topic "Discs Lancer 9". In this publication, I wanted to show more clearly to show that all the parameters used by the auto owner to select the disks on Lancer 9. All disk parameters are indicated in the figure below, and are presented in the table. So, staten parameters Discs for Lancer 9 depending on the volume of the engine
We will analyze the parameters specified in the table, for example, 6JJ × 16 PCD 5 × 114.3, ET46 DIA67.1.
The parameters are decrypted so:
6
- mounting width wheel wheel in inches.
JJ. - wheel rim profile (example: jj, c, ch, hj, etc.). In this letter is encrypted technical information On the closures of the rim of the disk (design, shape, height). The most common types of disc drives and all-wheel drive cars Today are J and JJ. Rims of disk rim affect the installation of rubber compensating for weights, as well as on the stability of the bus shift on the disk in extreme conditions. The differences between the types of clouds denoted by different letters can be minor, but it is impossible to neglect them.
The area of \u200b\u200badjustment of the tire to the rim is very critical, small changes in the tire board profile lead to difficulty and even the impossibility of mounting, as well as to the inability to hold the required pressure inside the wheel.
The designations A and D circuit rim fall under the category "Bicycles, Motorcycles and Scooters" (Cycles, Motorcycles, and Scooters), and also possible in the Industrial Vehicles and Lift Trucks category. Naturally, contours have completely different geometry in the same designation in two different categories.
Crates with the designation S, T, V and W are categories in " Trucks, COMMERCIAL VEHICLES, FLAT BASE RIMS), and the designations E, F G H - to the category "Trucks, wheels with collapsible rim" (Commercial Vehicles, Semi-Drop Center Rims). Obviously, despite the external interchangeability, it is better to choose the parameter recommended by the car manufacturer.
16
- Mounting wheel diameter of wheels in inches.
PCD 5 × 114.3 - The number of fasteners, in this case, 5 × diameter on which the centers of the holes are located, and in our case it is 114.3 mm.
ET46. - departure of the wheel plane of the wheel (the plane that the wheel is pressed against the hub), relative to the center of the rim. Departure is like a positive and minus (example: ET40 - a carET-4 "Jeep") is measured in mm. In this case, it is 46 mm.
DIA67,1 - The diameter of the central opening, which is responsible for the center of the entire wheel assembly on the hub of the car. Measured from the partial plane. In our case, equal to 67.1 mm. Many wheel manufacturers make a larger diameter DIA, and transition rings (adapters) are used on the hub.
Mitsubishi Lancer IX SW (CSW) dischair of Mitsubishi 2005 1.6 (98 hp, gasoline). Tools of wheels Mitsubishi Lancer 9
Discs Lancer IX (Lancer 9) - drilling, departure, diameter, width | Mitsubishi Lancer IX, Lancer 9, Wagon, Classic. Disk Disc Mitsubishi Lancer 9
Mitsubishi Dzbashchka Lancer IX SW (CSW) 2007 G.V. 1.6 (98 hp, gasoline). Tools of wheels Mitsubishi Lancer 9
Discs Lancer IX (Lancer 9) - drilling, departure, diameter, width
The Lancerix.ru website has already published the parameters of the Disk for Lancer 9. Given the large ascent of this topic of the car owners, we publish another news on the topic "Discs Lancer 9". In this publication, I wanted to show more clearly to show that all the parameters used by the auto owner to select the disks on Lancer 9. All disk parameters are indicated in the figure below, and are presented in the table. So, regular disk parameters for Lancer 9, depending on the volume of the engine, the following
We will analyze the parameters specified in the table, for example, 6JJ × 16 PCD 5 × 114.3, ET46 DIA67,1. These parameters as follows: 6 - mounting width wheel rim in inches.jj - wheel rim profile (example: JJ, C, CH, HJ, etc.). This letter is encrypted technical information about the rim collar (design, shape, height). The most common types of discs for mono-drive and all-wheel drive cars today are J and JJ. Color rims are influenced by the installation of rubber compensating for weights, as well as resistance to the offset of the tire on the disk in extreme conditions. The differences between the types of clouds denoted by different letters can be minor, but it is impossible to neglect them. The area of \u200b\u200badjustment of the tire to the rim is very critical, small changes in the tire board profile lead to difficulty and even the impossibility of mounting, as well as to the inability to hold the required pressure inside the wheel. The designations A and D circuit rim fall under the category "Bicycles, Motorcycles and Scooters" (Cycles, Motorcycles, and Scooters), and also possible in the Industrial Vehicles and Lift Trucks category. Naturally, contours have completely different geometry in the same designation in two different categories. Color with the designation S, T, V and W are categories in "Trucks, Flat Rimes" (Commercial Vehicles, Flat Base Rims), and the designations E, FGH - to the category "Trucks, wheels with collapsible rim" ( Commercial Vehicles, Semi-Drop Center Rims). Obviously, despite the external interchangeability, it is better to choose the parameter recommended by the car manufacturer.16 - the mounting diameter of the wheel rim in inches.pcd 5 × 114.3 is the number of mounting points, in this case 5 × diameter on which centers are located Holes, and in our case it is 114.3 mm.Et46 - departure of the wheel plane (the plane that the wheel is pressed against the hub), relative to the center of the rim. The departure is like a positive and minus (example: ET40 - a passenger car, ET-4 "Jeep") is measured in mm. In this case, it is equal to 46 mm.dia67.1 - the diameter of the central opening, which is responsible for the center of the entire wheel assembly on the hub of the car. Measured from the partial plane. In our case, equal to 67.1 mm. Many wheel manufacturers make a larger diameter DIA, and transition rings (adapters) are used on the hub.
Discs on Mitsubishi Lancer 9 Wheels: how to choose
Wheel Discs Lancer 9 Saying new wheel disks On Mitsubishi Lancer 9, many motorists blindly trust the calculators of online stores and recommendations of sales consultants. Meanwhile, on sites and in catalogs of conscientious companies, it is indicated that the information provided is not exhaustive and does not guarantee the exact compliance of the manufacturer's requirements.
Main settings
Installing new wheels - This is a simple and affordable way for most owners a way of correction of car appearance. The design of these accessories can be selected, guided by its own tastes. The remaining characteristics must be observed based on reliable technical documentation. When buying, you should consider all parameters specified in the marking.
- Landing diameter. It depends on it, what kind of tire you can use in the future.
- Rim width. It limits the minimum and maximum width of the tire.
- Departure. This characteristic indicates the distance from the bustal plane of the disk, which it touches the wheel hub, to its longitudinal plane of symmetry.
- The diameter of the location of the holes under the mounting bolts. If this parameter is inconsistent, it is simply impossible to install the item on the car. The drilling hole for the mounting bolts is standardized and depends on the other characteristics.
- The diameter of the central (installation) hole. Ideally, he must coincide with the size landing On the hub. Sometimes manufacturers, in the calculation of various techniques, make the hole slightly more and attached transition rings (inserts).
How to correctly choose discs Used designations
In classical European labeling, the information looks like this: 5.0 × 16 "4 × 113 ET28 D58.4, where 5.0 - the width of the disc, 16" - landing, 4 × 113 - the number and diameter of the location of the fastening bolts, ET28 - departure, and D58.4 - the caliber of the planting opening. It would seem that everything is simple. But the fact is that original details Mitsubishi Lancer 9 Disc size marked otherwise. Most likely, you will have to face such designation: 15 × 6JJ OFS46, OPC: B41, PCD114.3. The difference is as follows.
- Added jJ marking (letters can be different), clarifying the shape of the rim.
- The number of holes for the bolts are not specified at all, and the diameter of their placement is indicated as PCD.
- OPC - the size of the planting hole.
- OFS - departure.
Try not to get confused
Tuning lovers often do not see a special misfortune in the acquisition of wheels, the size of which differ from the recommended for use. They do not suspect the number of problems that arise as a result of a similar attitude to the technique. What is affected by the size of the discs of Mitsubishi Lancer 9? Judge for yourself.
- The large diameter wheels involve the installation of tires, the dimensions of which can simply not fit into the space of the wheel arches. Often, this inconsistency makes itself felt already in motion. When the tire suspension is started to touch the elements of the body and the chassis, as a result of which the details are damaged.
- When developing a car design, engineers perform many complex calculations, trying to achieve optimal work of all components of the equipment. Outside diameter Wheels directly affect the loads arising from the engine, gearbox, gearbox, drive shafts. Together with him, in fact, gear ratios of transmission affecting fuel consumption and dynamic characteristics car.
- Dispensing disk by departure means changing the load on hub bearings, hub and suspension elements. At first glance, insignificant, these changes are the cause of destruction of responsible parts.
Optimally, when Mitsubishi Lancer 9 disks 9 corresponds to the parameters recommended by the manufacturer for a particular configuration of a popular car. Below, in the table, indicate data for six release
Discs Lancer IX (Lancer 9) - drilling, departure, diameter, width | Mitsubishi Lancer IX, Lancer 9, Wagon, Classic
The Lancerix.ru website has already published the parameters of the Disk for Lancer 9. Given the large ascent of this topic of the car owners, we publish another news on the topic "Discs Lancer 9". In this publication, I wanted to show more clearly to show that all the parameters used by the auto owner to select the disks on Lancer 9. All disk parameters are indicated in the figure below, and are presented in the table. 
So, regular disk parameters for Lancer 9, depending on the volume of the engine, the following
lancer Lancer 9, l.
PCD ( planting or drilling)
Diameter disk
ET (departure), mm
Dia (hub diameter), mm
We will analyze the parameters specified in the table, for example, 6JJ × 16 PCD 5 × 114.3, ET46 DIA67,1. These parameters are: 6 - Mounting wheel width in inch
website
Disk Disc Mitsubishi Lancer 9
discs Lancer
Disclaimed Works Work. Wheel Spacers. Installing on Lancer X. Overview of parameters.
Wheels Lancer 9.
How does the wheel size affect overclocking? (H-AUTO)
Where to see the size of rubber on the car and how to choose the size of the tires (tips from the RDM import)
Buying casting and rubber by 17 inches.
All about MITSHUBISHI LANCER 9
Disks on Lanser
Also see:
- Hyundai Solaris Dimensions Hatchback
- How to remove the rear bumper Daewoo Nexia
- Peugeot fuse diagram 406
- New Skoda Octavia reviews
- Dimensions Renault Duster
- Nissan Murano video
- Fiat Linea Reviews Owners
- Replacing oil in automatic Ford Focus 3 PowerShift
- Honda Crosstur Characteristics
- Lexus Px characteristics
det23sad.ru.
What wheels breaking on Mitsubishi Lancer 9
Lancer 9. Valbrem discs. Bridgestone rubber. Rugs in the salon.
All about MITSHUBISHI LANCER 9
Alloy wheels Yamoto Segun for Mitsubishi Lanser X (Cast Disks Yamato Segun for Mitsubishi Lanser X)
Spacers for disks
Opel Astra GTC. goes away. 1.4T VS 2.0 Lancer 10.
Lancer x gt tuning
Lancer Cedia 4WD Work Viscounts
Replacing studs on rear wheels Machines.Toyota and other brands. (Popular version)
195 Repair of the brake system on Mitsubishi
Also see:
- Bumper for Suzuki Aerio Car
- How to turn off the mass on Kamaj
- Sound exhaust BMW x6m video
- Engine protection for Ford Ecosport 2014
- Repair of the steering rack on Mercedes W211
- UM 327 Ford Focus Programs
- How many oil lithres in Dr. Peugeot 206
- Warrow Mitsubishi Pajero 4 EGR
- Engines BMW m and n series
- Kia Rio rear suspension Scheme
- What drives are suitable for Mazda 323
- Volkswagen LT 35 in himself
- Hyundai Streks from South Korea
- Honda Suspension Accord 7 D2
- Chevrolet Cruze. Leather on the steering wheel
aUTO-ARSELON.RU.
Mitsubishi Lancer IX SW (CSW) Mitsubishi Disk (CSW) 2005 1.6 (98 hp, gasoline)
- Dzboboltovka.ru.
- Mitsubishi.
- Lancer IX SW (CSW)
- 1.6 (98 hp, gasoline)
- 2005 G.V.
Find the parameters of the Mitsubishi Lancer IX SW (CSW) disc / 1.6 (98 HP, gasoline).
Table of parameters and breaks of disks Mitsubishi model Lancer IX SW (CSW) 1.6 (98 ls, gasoline) - 2005
- LZ (number of holes)
- ET (disk departure)
- Dia (hole diameter)
razboltovka.ru.
Disk breakdown Mitsubishi Lancer 9
Lancer 9. Valbrem discs. Bridgestone rubber. Rugs in the salon.
All about MITSHUBISHI LANCER 9
animation disks on Mitsubishi Lancer 10.mp4
Alloy wheels Yamoto Segun for Mitsubishi Lanser X (Cast Disks Yamato Segun for Mitsubishi Lanser X)
Spacers for disks
Wheel rotation After replacing the Lancer IX caliper repair kit
MITSUBISHI LANCER 9 (skillful handles !!!)
Spacers Starleks 20mm Vektor 35mm
Lancer x gt tuning
Sports cars
Also see:
- Angel Eyes Replacing Light Bulb on BMW
- Mitsubishi Pajero 3 door years of release
- Repair Moped Suzuki Sepia Video
- How to change the stabilizer bushings on Skoda Octavia Tour
- Starting Heat Heat Chevrolet Cruz
- Cable for bMW diagnostics E34
- Roof trunk for Nissan Almera 2013
- Pixels on dashboard BMW X5 E53.
- Fuel filter for Toyota Camry. V40 2 4.
- Volkswagen conveyor What rights are needed
- Honda XLR 250 valve clearances
- Tom Ford Noir Pour Femme Perfume Water Reviews
- Repairs diesel engine Opel Astra
- How to fix crankcase protection Ford Focus. 2
- Honda Engine Model GX 390
stk-auto.ru.
Mitsubishi Lancer IX SW (CSW) Mitsubishi Disk (CSW) 10 (98 hp, gasoline)
- Dzboboltovka.ru.
- Mitsubishi.
- Lancer IX SW (CSW)
- 1.6 (98 hp, gasoline)
- 2004 G.V.
Find the parameters of the Mitsubishi Lancer IX SW (CSW) 2004, 1.6 (98 hp, gasoline) disk.
Table of parameters and breaks of disks Mitsubishi model Lancer IX SW (CSW) 1.6 (98 ls, gasoline) - 2004
Disk drilling parameters, usually ring up:
- LZ (number of holes)
- PCD (circle diameter of hole centers)
- ET (disk departure)
- Dia (hole diameter)
The Lancerix.ru website has already published the parameters of the Disk for Lancer 9. Given the large ascent of this topic of the car owners, we publish another news on the topic "Discs Lancer 9". In this publication, I wanted to show more clearly to show that all the parameters used by the auto owner to select the disks on Lancer 9. All disk parameters are indicated in the figure below, and are presented in the table. So, regular disk parameters for Lancer 9, depending on the volume of the engine, the following
lancer Lancer 9, l.
PCD (seat hole or drilling)
Diameter disk
ET (departure), mm
Dia (hub diameter), mm
We will analyze the parameters specified in the table, for example, 6JJ × 16 PCD 5 × 114.3, ET46 DIA67.1.
The parameters are decrypted so:
6
- mounting width wheel wheel in inches.
JJ. - wheel rim profile (example: jj, c, ch, hj, etc.). This letter is encrypted technical information about the rim collar (design, shape, height). The most common types of discs for mono-drive and all-wheel drive cars today are J and JJ. Color rims are influenced by the installation of rubber compensating for weights, as well as resistance to the offset of the tire on the disk in extreme conditions. The differences between the types of clouds denoted by different letters can be minor, but it is impossible to neglect them.
The area of \u200b\u200badjustment of the tire to the rim is very critical, small changes in the tire board profile lead to difficulty and even the impossibility of mounting, as well as to the inability to hold the required pressure inside the wheel.
The designations A and D circuit rim fall under the category "Bicycles, Motorcycles and Scooters" (Cycles, Motorcycles, and Scooters), and also possible in the Industrial Vehicles and Lift Trucks category. Naturally, contours have completely different geometry in the same designation in two different categories.
Color with the designation S, T, V and W are categories in "Trucks, Flat Rimes" (Commercial Vehicles, Flat Base Rims), and the designations E, FGH - to the category "Trucks, wheels with collapsible rim" ( Commercial Vehicles, Semi-Drop Center Rims). Obviously, despite the external interchangeability, it is better to choose the parameter recommended by the car manufacturer.
16
- Mounting wheel diameter of wheels in inches.
PCD 5 × 114.3 - The number of fasteners, in this case, 5 × diameter on which the centers of the holes are located, and in our case it is 114.3 mm.
ET46. - departure of the wheel plane of the wheel (the plane that the wheel is pressed against the hub), relative to the center of the rim. The departure is like a positive and minus (example: ET40 - a passenger car, ET-4 "Jeep") is measured in mm. In this case, it is 46 mm.
DIA67,1 - The diameter of the central opening, which is responsible for the center of the entire wheel assembly on the hub of the car. Measured from the partial plane. In our case, equal to 67.1 mm. Many wheel manufacturers make a larger diameter DIA, and transition rings (adapters) are used on the hub.
