How to replace the oil in the Mitsubishi Outlander automatic transmission box. How to replace the oil in the automatic transmission box Mitsubishi Outlander what should alert
Japanese designers have developed a variety of transmissions for their crossovers. Models 2007-2012. The issue was offered on international, including Russian, markets with 5 or 6-speed "mechanics", as well as with a 6-range "machine". In 2013, the sales of the series of the CL series started, where transmission mechanism The stepless ACAP model was performed - the "Jatco" variator (JF011FE number).
Mitsubishi Outlander XL is an excellent urban car, security, mobility and reliability of which are not affected by a traffic jam, nor the weather whim. Both types of automatic transmission provide a mild acceleration machine and a lightning transition from one transmission to another. The uninterrupted operation of the transmission, largely depends on the quality of the oil poured into it.
How to keep the gearbox efficiency?
Replacing the lubricant in the crossover automatic transmission is not regulated by the manufacturer. But practical experience suggests: when the car runs, exceeding the mark of 60 thousand km, the oil in the gearbox is clogged with wear microparticles, thickening and ceases to fully circulate, lubricating parts, drunk about each other. All this inevitably leads to the crash of automatic transmission and expensive repair.
The cost of repairing the gearbox Mitsubishi Outlander XL may exceed 100 thousand rubles. From large financial losses will protect the replacement on time transmission Oilwhich driver is able to perform with his own hands.
A little more about the timing. If XL is used to travel along a high-quality coating highway, the lubricant can be changed after 90-100 thousand km of mileage, but during operation vehicle In adverse conditions, the procedure is carried out every 50-60 thousand km. Regardless of kilometer, the replacement of the fluid is required and when alarming "signals" appears from the machine side.
What should alert?
- You have to use an effort when switching gear.
- In the automatic transmission there is incomprehensible noise and grinds, periodic or constant vibrations are observed.
- "Iron horse" will be dropped not only in slush and snow, but also on dry asphalt.
- Weakens car traction power.
Phased replacement ATF.
Selection of lubricant - the first and very responsible step
There are a wide range of stores in stores. lubricants. What to stay? There is a single criterion: only original products! No savory! No cheap analogs and fakes! The counterfeit product will seriously hurt the box. At best, the secondary substance replacement will be required, at worst - repairs. In the crossover variator XL, the lubrication feature performs the ATF brand Dia Queen CVTF-J1. For a 6-range automatic transmission, Dia Queen-J3 liquid is suitable. A full update will require 12 liters of lubrication.
What else will need to buy?
You should purchase a rubber sealer for the pallet, a special washer for drain plug, as well as a pallet cleaner from spent oil residues. This goal is a substance Liqui MOL. Those who wish to save may well do with acetone or kerosene.
Required tools and other means
- spanners heads 10 and 19;
- slotted screwdriver or knife;
- two watering cans and vessels for dirty oil (it should be noted that the container should accommodate 12 liters of liquid);
- pure fabric.
Armed with everything necessary, you can proceed to practical actions. Replacing the lubricant begins with checking its level.
Fill the fresh product needs to be accurately installed by the manufacturer. The lack of oil will lead to the fact that the pump along with the lubricant will capture the air. The consequences are the formation of an air-and-oil mixture and a decrease in pressure. Drinking parts will not be normalized normally, the automatic transmission will start overheating. With an excess of fluid, it will be foaming and emissions from the box through the Sapun. In both situations, the transmission will quickly fail.
So, the next step is to check the ATF level
The measurement is carried out by a dipstick with an engine and a lubrication temperature of 70˚. In order to warm up a small trip (up to 15 km). At the probe car of the XL series there are three marks: "Cold", "Medium" and "Hot". Optimum oil level - "HOT". By the way, during drain, the liquid should also be hot: so it will quickly remove and in the variator "stuck" much less of its residues.
Replacement of spent material: a sequence of actions
Attention! In the XL variator, the replacement of lubricating fluid is carried out in two stages!
The ATF update in the 6-range automatic transmission is made according to the same scheme as in the stepless box of the crossover XL.
Instructions for motorists: Principles for using transmission lubrication
Independent replacement of transmission oil seems difficult only on
First look. Carefully examining the recommendations of the Masters, even the novice car enthusiast is able to carry out the procedure at the proper level and ensure the CPP of the car impeccable performance.
And a little about the secrets of the author
My life is not only connected with the car, namely repair and maintenance. But also I have a hobby like all men. My hobby is fishing.
I started a personal blog in which I share my experience. Many things try, various methods and methods for increasing the catch. If interested, you can read. Nothing superfluous, only my personal experience.
ATTENTION, only today!
Functions oil ATF. In Mitsubishi Outlander automatic transmission:
- effective lubrication of rubbing surfaces and mechanisms;
- reduced mechanical load on nodes;
- heat dissipation;
- removal of microparticles resulting from corrosion or wear of parts.
- wear salts of automatic transmission;
- wear surfaces of shafts, the occurrence of the gap between the shaft and the sealing element;
- wire of the sealing element of the automatic transmission and shaft of the speedometer drive;
- lental primary Vala Automatic transmission;
- damage to the sealing layer in compounds between parts of automatic transmission: pallet, automatic transmission, Carter, clutch housing;
- weakening bolts that provide the compound of the above parts of the automatic transmission;
Due to lack of oil or low-quality oil in Mitsubishi Outlander automatic transmission:
- plungers and hydroblock channels are clogged with mechanical particles, which leads to a deficiency of oil in packets and provokes wear of the sleeve, rubbing parts of the pump, etc.;
- overheat and quickly wear out steel discs gearboxes;
- overheat and burn rubberized pistons, stubborn discs, clutch drum, etc.;
- warm and comes into disrete of hydraps.
Check the oil level in the Mitsubishi automatic transmission using Outlander using the probe. Oil dipstick has two pairs of labels - the top pair of Max and Min allows you to determine the level of hot oil, the lower pair is on the cold. Using the probe is easy to check the oil condition: it is necessary to drop the oil to clean white tissue.
When choosing an automatic transmission oil Mitsubishi Outlander for replacement, it should be guided by a simple principle: it is best to use the oil recommended by Mitsubishi. At the same time instead mineral Oil You can fill a semi-synthetic or synthetic, but in no case cannot be used by the "class below" oil from the prescribed one.
Synthetic oil for Mitsubishi Outlender automatic transmission is called "unreasonable", it is poured for the entire service life of the car. Such oil does not lose its properties under the influence of high temperature and is designed for a very long term using Mitsubishi Outlander. But it is impossible to forget about the appearance of a mechanical suspension as a result of the wear of the frictions with a very significant mileage. If the automatic transmission is kept in conditions of lack of oil for some time, it is required to check the degree of contamination and perform a replacement if necessary.
Methods for replacing oil into Mitsubishi Outlander automatic transmission:
- Partial oil replacement in Mitsubishi Outlander box;
- Full oil replacement in Mitsubishi Outlender box;
Full replacement of Outlander Mitsubishi Automobile Outland is made by means to replace oil in automatic transmission, Specialists in the car service. In this case, it will be necessary more oil ATF, which accommodates the Mitsubishi Outlander automatic transmission. For flushing out the one-hour or double volume of fresh ATF. In terms of cost, it will be more expensive than partial replacement, and not every car service provides such a service.
Partial replacement of ATF oil in a Mitsubishi Outlander automatic transmission box on a simplified scheme:
- Unscrewed drain plug, merge the old ATF oil;
- We unscrew the DCP pallet, which, besides its bolts, processed along the contour of the sealant.
- We get access to the automatic transmission filter, it is desirable to change it with each oil change, or rinse.
- At the bottom of the pallet there are magnets that are necessary for collecting metal dust and chips.
- We clean the magnets and rinse the pallet, wipe dry.
- We establish the automatic transmission filter into place.
- We establish the trash of automatic transmission to the place, replacing the laying of the drive of the automatic transmission, if necessary.
- Tighten the drain plug by replacing the drain plug gasket for automatic transmission.
Before each motorist is a task of creating conditions for normal and reliable operation of the car transmission. It is important to change oil in a timely manner in Mitsubishi Autlender automatic transmission using original consumables and spare parts. With the right approach, the box will serve at least 300 thousand mileage kilometers.
To prevent expensive repair, some car owners periodically appeal in a hundred, ordering maintenance, but this procedure is worth a lot of money. We will help you to save and tell you how to replace oil into automatic transmission outlander Chl with your own hands in the garage.
The whole process takes a little time, but requires care and strict compliance with the instructions. When servicing the transmission, you will not need special tools or devices that use the wizards in specialized Services. It can be limited to conventional tools that are available in each garage.
Why maintain the oil level?
Replacing the oil for Mitsubishi Outlander in the gearbox is needed to continuously maintain the oil level in the norm. The reduced level is dangerous in that the special pump captures air with oil, as a result of which an air-oil emulsion occurs, well compressing and characterized by low thermal conductivity. The oil begins to lose important properties and becomes unsuitable for normal operation of the node.
As a result of such deviations, pressure decreases in the system, and the insufficient heat dissipation from the box can lead to overheating. In addition, the process of lubrication of rubbing parts deteriorates. Operation of the machine with foamed oil in the automatic transmission will quickly lead to a transmission breakdown.
Foaming oil usually leads to an increase in its level when checking the dipstick. In this case, you need to drown out the motor and leave the car so that it is cooled. After that, check the level again - if the probe is dry, it means you need to urgently add a certain amount of transmission fluid.
Without timely replacement of oil in the automatic transmission Outlander XL, the liquid can start foaming with rotating parts when the level is exceeded. Foaming does not occur immediately after the start of the motor, and when driving on high revolutions. The volume of oil increases, so it starts to fly through the Sapun. If you look at the car, you can detect oil leaks on the box.
Why change the oil on time?
Timely oil replacement for Mitsubishi Outlander is required not only to maintain a normal fluid level, but also to maintain good lubricating fluid properties. When the transmission oil is contaminated, it turns into an abrasive suspension, which under pressure creates a sandblasting effect. Intensive influence on the hydraulic contact contributes to the thinning of the walls in the locations of the valve-regulators, against the background of which leaks occur.
How to check the level?
To check the oil level in the Outlander box, a special probe is designed. It has two pairs of marks - the top pair of Min and Max allows you to determine the level with a warm engine, and the bottom is cold. With the help of probe, you can easily and quickly check not only the level, but also the condition of the liquid: just drip it onto a white cloth or a napkin.
How to choose oil?
Choosing oil to replace into automatic transmission in Outlander CL, you need to be guided by the elementary principle. It is better to use the original lubricant liquidwhich is indicated in the instruction manual for the car. This is usually Mitsubishi Diamond ATF J2, SP II, SP III, PSF 3 and Jatco JF613E.
Some motorists are confident that synthetic oil In the outlander box, it is not necessary to change, as it is used throughout the life of the machine. Similar oil for a long time does not lose its properties even under the influence high temperaturesBut in the fluid over time there are mechanical suspension due to wear of frictional frictions with a large mileage.
Replacement options
Replacing the oil in the automatic transmission of Mitsubishi Outlander can be made in two ways: partial and full replacement. Consider both options, and you yourself choose which you will be more suitable.
Full replacement
This option for replacing the oil in Mitsubishi Autlerian automatics is more complex and requires a special installation, which is available in specialized car services. At home, it will not be possible to make this operation without assembling additional devices, and the professional device is unlikely to have conventional motorists in the garage.
Partial replacement
Produce partial replacement Oil in Outlander can every motorist in garage conditions. Usually, with such a method, no more than 50% of the volume follows, and the residues are delayed in the hydrotransformer. Accordingly, a similar replacement is more like a renewal of a transmission fluid.
To replace, you need to drive the car on the pit or the overpass, substitute the tank under the drain plug and unscrew it. Old liquid rolling. Next you need to unscrew the pallet that holds on bolts and sealant. You will get access to the filter that is recommended to replace or rinse thoroughly.
At the bottom of the pallet there are magnets that collect metal chips and dust - products wear of the elements of the gearbox. Clean the magnetize, wash the pallet and wipe. Next, install the filter and the pallet in place by flashing it along the contour of the sealant and replacing the gasket if necessary. Tighten the drain plug and fill the new oil through the process hole from which you want to remove the probe.
Driving 20 kilometers, check the level of fluid into the automatic transmission of the outlander and, if necessary, make it up to the maximum. The regularity of the replacement of transmission oil depends on the nature of the ride and the mileage of the machine. On average, experts advise it to produce it every 20-30 thousand mileage kilometers.
To date, the car repair with your own hands is a process that does not require special skill. First of all, it is necessary for a certain amount of time and minimum set of tools. Experienced specialists recommend working to replace oil by specialists, but in the absence of one way or another, it is quite acceptable to work on the replacement of automatic transmission oil own forces. Mitsubishi Outlander oil must be chosen carefully in order to ensure the coherent work of the vehicle.
What is oil in automatic transmission?
Replacing the oil in the automatic transmission on Mitsubishi outlander is necessary to prevent mechanical friction of parts between themselves, as well as for:
- Preventing mechanical load on special nodes in the system;
- Reduce temperature in the gearbox;
- Help the microparticles that have fallen into the system of the environment;
- The implementation of the lubricant in the system, which prevents the interaction of parts and erasing surfaces;
- Ensuring the coordinated work of the vehicle.
The driver must be remembered that choosing the automatic transmission for Mitsubishi is thoroughly, since the poor lubricant in the system can:
- Cause a decrease in the power of the vehicle;
- To form suspension inside the system, and in some cases a mechanical chips;
- Call corrosion;
- Cause erase of the surface of the parts of the car;
- Leads to vehicle breakdown.
Why can oil flow?
Replacing the oil in automatic transmission in Mitsubishi outlander with their own hands should occur in several stages. There are some breakdowns due to which oil can flow, and which are eliminated by their own during operation on updating the transmission fluid:
- Spristen of the secondary or primary mechanism;
- Mechanical disorders in the vehicle pallet system, housing or clutch mechanism;
- Bolt wear in the system;
- Dissenting the layers between the layers of the automatic transmission;
- Depressurization of the system.
In order to eliminate the above problems, it is necessary to initially select high-quality materials, including sealant. In case of violations or damage to the system and the pallet, you should replace the specified item.
Oil replacement process in automatic transmission on Mitsubishi
Replacing the oil in the automatic transmission in Mitsubishi Outlander occurs in accordance with the requirements technical manual User. In order to qualitatively, the replacement should be used as follows. step by step algorithm Actions:
- Unscrew a special drain plug;
- Unscrew and remove a special pallet;
- Merge old spent oil with automatic transmission on Mitsubishi Outlander;
- Replace oil filter Automatic transmission;
- Unscrew and clean the special magnets that accumulate and hold metal suspension and chips;
- Set new filter Automatic transmission;
- Clear system special fluid for washing;
- Pour a new transmission fluid;
- Tightly spin the drain plug to avoid leaks in the system.
Fill new oil in the automatic transmission should only be through a special hole intended for this. It is important to test vehicle with a new lubricant in the system. If necessary, in the future it is possible to add some amount of transmission fluid.
Tools for replacing oil into Mitsubishi automatic transmission. Outlander:
- Gloves to protect the skin of the hands;
- Capacity for the drain of old oil;
- Rag;
- Fluid for washing the system from suspension and other elements that are able to accumulate in the pallet of the gearbox.
Method of draining old lubrication is quite accessible as experienced driverand newcomer. In order to ensure complete removal of the old oil from the system, you should unscrew a special stopper in the pallet and substitute the container intended for this. Only then it is necessary to fill the washing liquid.
Many drivers are wondering with which regularity to replace oil into the automatic transmission in the system. However, there is no clear answer to this request, since this process and its regularity depends not only on the mileage of the vehicle, as well as on the operating conditions of the car and the nature of driving on it. It is necessary to carefully monitor the common state of the vehicle, providing a timely replacement of certain parts of the device.
