A car for camping do it yourself. Ceper - Start of work: insulation and luggage compartments

11.08.2020

Many of the car owners dream of their own auto farmers on wheels, thanks to which you can easily travel with your family in various places. But the purchase of a car can not always afford a family, so many make it independently. To do this, you will need a little:

But, in addition, it should be high-quality, and most importantly, reliable vehiclewhich can accommodate an autode on wheels.

So what should I do? Before creating a camper with their own hands, a legal advice should be visited. Such modernization of the car requires legalization. For each country there are different requirements.

First step - Camper with your own hands

The whole process of creating such a design can be divided into several stages:

performing outdoor work;
fulfillment of internal works;
providing water supply cherry;
side and connecting the gasification and electricity system;
furniture placement;
small work.

After that you can travel on Keper at any free time.

Number of seats

As an example of creating a camper, we will take the usual average van. If the exercise of the van will be carried out with only two people, there will be plenty of space. If the family has more people, then it is necessary to think over an additional seats. Do not forget that all seats should be provided with seat belts.

Determine in advance how many beds will have your home on wheels. There is a very good option to increase them. Arrange inside bunk beds. You can also make a bed that will "fall out" from under the roof. This will help save the space of Ceper.

At this stage of layout, you must have a clear plan of the internal structure. Of course, it will be possible to make their own adjustments in the course of the installation, but the basis should be thought out to the smallest detail.

Performing outdoor work

First of all, take care of the purity of the inside of the camping. The zone should not contain dirt, dust, essential defects. This will be the key to the successful formation of the autoomom.

Also should be planned form in general terms. In addition to the plan, you can make sketches on paper.

The body part rarely has windows, which is catastrophically for a journey on the crepe. Place where it is best to install the windows for the most convenient view. In addition, they will open access to the stream of fresh air and allow the sun's rays to penetrate, which will create additional lighting. Windows You can choose absolutely different shapes, species and structures. Everything will depend exclusively on your preferences, as well as the features of the body part.

Additional holes in the body

When you create a camper with your own hands, do not forget to make several holes:

for the output of gas in case of his leakage;
for ventilation;
for output from the heater;
for filling gorlovin for water.

Of course, you can perform some of them after creating a camper, but it can be much more problematic. It is best to do everything at once and in advance. But it should be carried out only when you are exactly sure that these holes will be in those places.

The places with an open layer of metal should be immediately treated with a layer of primer to prevent corrosion.

Performance of internal work

How to equip inside a camper? It should create partitions between the front seats and the main part of the body. But if you wish, you can not do. Installation of the partition is also varied. It can be fixed with the help of screws or weld to the body itself. If necessary, at this stage, use the grinder.

During the operation of the Bulgarian, do not forget about security tools. Work with it neatly, especially if you use the tool for the first time. Do not forget to wear protective glasses on the eyes, as well as make sure in reliability of fixing the circle. Also, in the process of working with the grinder, sparks will fly, which when hitting the glass will create defects. Therefore, in advance to take care of reliably close it.

Insulation

The layer of insulation for mini-camper is very important. From his quality and proper Installation The temperature inside will depend on, as well as sound insulation. A large number of materials from various firms are represented on the market. Their choice will be solely individual, based on the features of the environment, financial position, type of body.

Insulation must be cut into small pieces and gently stick them. The main feature and mainstream is the protection against moisture. If the insulation layer does not cope with its immediate duty, remove it.

Prepare to cover the case in advance:

On the side covers should use a thick layer of plywood. This is done so that it can withstand the weight of the furniture, which will be mounted directly on it.

On the side walls it is necessary to use glue, which can withstand a large range of different temperatures. With it, glue isolation and side walls. The glue for different temperatures is used because the van will be operated in various conditions: in severe frosts, and with a scorching summer sun. Additionally, heating is arranged. If the glue does not have all the necessary properties, then the sealant and the coating simply disappear.

Camper

The covering of the autoom from the roof itself begins and until the flooring. We first make installation of the insulating and facing layer and only after that smoothly go to if you will equip an exclusively winter camper, then the sealant layer should be increased and additionally seal.

To ensure a sufficient place for insulation, use wooden planks that are mounted to the floor. Fasteners must be performed using a special sealant corresponding to the coating. After that, laying a layer of isolation is made, and then they are covered with plywood. The plywood itself is attached with screws or sealants. Do not forget about the place of water supply, gas cables and electric cables.

Water supply

The prerequisite for water supply at home on wheels - it must have flow of flow water. To implement this, you should install a couple of canister with water under the sink. Mounted pump will produce the required flow of water to the crane.

If you wish, the camper can also be provided with hot water. It will be convenient if you wish to post a shower. To do this, it is necessary to put large tanks with water under car body. To connect the heating system, the acquisition and installation of additional hoses will be required.

Do not forget about wastewater. The conclusion can be carried out with the help of a hose placed in the floor, or produce water drain into a portable tank. Capacity should be emptied within the shortest possible time, since in the summer it will go from it and in the winter it will be simply frozen. You can also install a toilet.

Gasification and electricity

Installation of the hose for gas and electricians must be entrusted with extremely qualified specialists. With the slightest error independent installation This can lead to a deplorable outcome.

Calon with propane can be used for cooking. You can do without it without it, replacing the container on the usual electric stove. Store the cylinder is necessary in a separate place.

The system of electricity camp consists of charger, battery, panels for control and wire system.

Gasification and electricity in an "Camper-Trailer" type is played by a very important role. In the case of departure to nature, the autonomy of both systems should be at the maximum level.

Furniture

If you wish, you can use absolutely any furniture as you like. You can purchase elements of new furniture or design and make it yourself.

Almost everyone who has a camper, feedback leaves exceptionally positive. You can create not only a small family-friendly car on wheels. It is also quite realistic to make huge off-road campers. The choice is yours!

A car on the wheels, and even equipped with your own hands, is the dream of many lovers of auto travel and outdoor activities in nature. It provides its owner an amazing freedom when traveling, freeing from the need to search and book a hotel, acquire tickets, pack the suitcases, etc. In addition, its own car allows you to easily travel even big family, including pets - for this it is necessary to use the appropriate furniture, as a rule, transforming.

When for the first time appeared on the road an auto trailer on wheels to answer rather difficult. The first such experience was implemented by Jennings in the 38th year of the last century, although homemade samples of highways appeared much earlier. All autoomom on wheels can be equipped with almost all the necessary attributes of the usual and comfortable life - Bathroom, shower, gas stove, full-fledged sleeping placethat are present even in the smallest auto-volumes that budget Gazelle is often taken as the basis of which in Russia.

Depending on what kind of motor belongs to the wheel on wheels, it can be:

trailed;
van;
combined.

A fairly common practice is currently the personnel re-equipment of suitable transport, the same domestic gazelle, in comfortable auto-volume for travel. But before making an autode on wheels with their own hands, it is necessary to determine the main goal of re-equipment - long or short-term accommodation in the auto house, as well as pick up or make appropriate furniture.

Classes of houses on wheels

According to the generally accepted classification, all autooms on wheels are divided into three main classes:

Attention! Any autod class "A", made on the basis of a bus or truck, according to transport classification Requires the rights of the category "C" by the driver.

Speaking about the classification of the "Wheel House", the following concepts should be highlighted:

Tent trailer

The homemade autode on wheels does not necessarily have to be expensive and complex in the manufacture, especially if it is used relatively rarely and for a small number of people. Some types of highways do not even require the installation of furniture, and are used as a bed. In order to independently make an autode trailer, you will need to make certain efforts and a sufficient amount of time.

The main "power" element of such a car - frame, can be purchased at a finished form, or to assemble it yourself, for which the skill and certain technical knowledge will be required. With independent manufacture, special attention should be paid to the anti-corrosion processing of all steel elements of the future autodoma.

The frame, mounted on the chassis prepared for the autodoma, can be both steel and wooden. The focus on its creation should be given to the quality of the compounds of parts, since when such a trailer-autodoma is moved, the entire design will be subjected to serious dynamic and vibration loads. Inside such an autodoma, you can position a sufficiently convenient bed, and at the time of stops on vacation, the construction of the autoomom is unfolded, and the tent is quickly installed on top. Such an autode on the wheels, the photos of which is presented below, is optimal for short trips and easy-to-go outdoors.

Another option of such a trailer can be viewed on the video:

How to make an autode on wheels do it yourself

In order to make an autode on wheels with their own hands, you can use any minibus, freight car or even a bus. In order to create it, you will need to make a lot of effort, time, and be prepared for quite serious material investments, which subsequently pay upon comfort when traveling in its own auto farm.

The process of turning the standard Gazelles in an autode on wheels will necessarily be accompanied by a number of works that are mandatory:

In the case when the trailer house on wheels is created with the goal of long journeys, it is advisable to provide for a good audio video system and satellite TV. If financial capabilities allow, it will be good option Installing solar panels that will extend the operation of the generator.

Attention! In most cases, the re-equipment of the vehicle in the trailer Avtodom requires to pre-bind all the "alterations" to avoid legal problems in the future.

Internal work

Many lovers travel comfortably interested in the question - how much is authod on wheels in Russia, but learning the cost ready option Prefer to engage in the creation of the autodoma with their own hands. And this is not deprived of meaning, because to make a car on wheels from Gazelle with their own hands by any person, ready to attach a certain amount of effort and spend its time.

The first thing that will be needed to be made inside the cabin of the future autodoma on wheels is to dismantle the partition located for passenger seats. If it is attached by bolts, there will be no problems if the welded connection is used, the Bulgarian will be required. After dismantling, you should completely free the interior from the interior decoration. In parallel, it is worth checking the metal parts for the presence of corrosion foci. Take measures to eliminate them remembering that it will be much more difficult to disassemble the finished car.

Before proceeding with the insulation and interior of the autodoma, it is necessary to thoroughly consider the water and power supply system, Since all pipes and electrical cables are better hidden under the trim - it will avoid their accidental damage. After that, an autode on wheels on the basis of Gazelle requires serious insulation. In addition to special materialsWith vibration insulation characteristics, basalt mineral wool or extruded polystyrene foam can be used for autoomom.

An important moment in the autodoma finish on wheels inside and outside is the protective processing of the material used. Thus, additional metal elements outside the autodoma must have high-quality anti-corrosion processing. The elements of the internal object are performed, as a rule, from wood. To process them, it is recommended to use a special flame-protected impregnation, which will prevent the spread of the flame, will not allow the fungus to form, to get rid of which it can be simply impossible.

Certain ideas for creating your own project can be "borrow" from manufacturers of such houses, looking at the following video:

Gas and electric equipment

Any car on wheels - Mercedes or Gazelle requires a special relationship in terms of electricity supply. It is not necessary to naively believe that, without having an appropriate formation, you can qualitatively perform electrical wiring and install the appropriate equipment in the autode. The same applies to gas equipment.

For example, few people know that for a gas cylinder in any auto house, it is necessary to "highlight" a separate closed zone, at the bottom of which the holes communicate with the outer atmosphere should be present. This is allowed to allow propane, which is heavier than air, when leakage from the balloon "leave" an autode on wheels, and not cause poisoning or fire in the cabin.

An important point for the autodoma is the correct calculation of the battery power. To ensure maximum autonomy, you should summarize the daily power consumption of all devices present in the autodomome. The resulting value in watts will be required to divide by 12 (V), resulting in a value in amps-hours (AH) - it is precisely it is indicated on the battery and allows you to judge its power. So, When energy consumption in an auto-volume 50-60 AH / day, optimally acquire a battery in 120-150 AH. Such a car machine on wheels will be able to function offline two days. It is advisable to provide an external socket to recharging the autodoma battery in the parking lots.

Furniture

Despite the fact that it will not be a problem in the purchase of finished furniture for autoomom, according to reviews, it is not able to satisfy all the requests of the car owners, especially creating an authome on wheels on their own drawings. therefore optimal option becomes either her independent manufactureor individual order on furniture production.

In most cases, an independent manufacture of furniture is more optimal. Since for a small car, for example, on the basis of standard Gazelle or UAZ, furniture will not need much, and it is not different, and it is not different, at this stage of work you can save. For a proper level of comfort in the auto house, as a rule, the following furniture structures are manufactured:

dining table, to save space in a small auto house, it is better to use a foldable option;
kitchen table with washing and working surface;
open shelves or boxes located under the Ceiling of Avtomoma;
in the presence of a toilet in the autodomy on the wheels, it will be necessary to make a partition with a door.

When a KAMAZ or bus is taken as a base for auto-volume, the number of furniture listed above increases. Made by an autode on wheels with their own hands, to facilitate the task of determining the type and number of furniture, you can use special computer programs, or draw a detailed plan for the future planning of the Avtomom on paper, where it is clear not only the type of furniture, but also its location.

How can the most expensive house on wheels can be done in the photo - perfectly visible how exquisite and comfortable can be interior decoration.

Construction house on wheels do it yourself, it is worth paying attention to the quality of materials. So for furniture It is advisable to use moisture-resistant materials resistant to household chemicalsBecause cleaning in any type of autoomom - from the bus, trailer or gazelles, often often.

Perhaps there are very few people who would not want to travel and at the same time spend the night at home without using the services of hotels or hotels. Many will say that it is impossible and any trip is accompanied by a hotel room. However, the solution is - an autod or a house on the wheels. You probably saw such mobile structures in foreign films. And it is not strange, because I will say in America, according to the statistics of each 3 inhabitant there is a house on wheels.

Such a house is not only convenient and comfortable, but also saves significantly, as the question of finding housing disappears. On the advantages of the Avtomom can be told for a long time, and there are really many of them. However, one minus is - the car-house on wheels is not from cheap pleasures. But if you have patience and hard work, there is a way out - build a mobile home on wheels with your own hands.

The main need for such a house is traveling, which can be easily sent with family and even small children. Autodom is useful for business trips, you will not have to search for hotels, book rooms, collect luggage and wear it with you.

The main thing is that the driver is experienced, with good driving experience and of course, with a positive attitude towards this type of transport.

House on wheels: What you need for comfort

Although the house will be in the form of mobile housing, but this does not mean that it should not be comfortable and satisfy the minimum needs of the owners.

Lighting at home

To supply light to the mobile home, it will be necessary:

battery battery type;
device charger;
wire system for subsequent electrical wiring;
panel for controlling electricity supply.

Heating for home

For housing heating, several types of heaters can be used, it may be an autonomous view and gas cylinder. Preferably the use of gas, since in addition to heat, it will provide the possibility of cooking.

If you have chosen heating with gas, then you will have to seek help from a specialist. Of course, to build everything with your own hands from beginning to end commendable, but you should remember the safety of passengers.

Air (ventilation) for home

But, in addition, it is necessary to have high-quality, and most importantly, a reliable vehicle that can accommodate an autode on wheels.

First step - Camper with your own hands

The whole process of creating such a design can be divided into several stages:

performing outdoor work;
fulfillment of internal works;
providing water supply cherry;
side and connecting the gasification and electricity system;
furniture placement;
small work.

After that you can travel on Keper at any free time.

Number of seats

Performing outdoor work

First of all, take care of the purity of the inside of the camping. The zone should not contain dirt, dust, essential defects. This will be the key to the successful formation of the autoomom.

Also should be planned form in general terms. In addition to the plan, you can make sketches on paper.

Additional holes in the body

When you create a camper with your own hands, do not forget to make several holes:

for the output of gas in case of his leakage;
for ventilation;
for output from the heater;
for filling gorlovin for water.

The places with an open layer of metal should be immediately treated with a layer of primer to prevent corrosion.

Performance of internal work

Insulation

The layer of insulation for mini-camper is very important. From its quality and proper installation will depend on the temperature inside, as well as sound insulation. A large number of materials from various firms are represented on the market. Their choice will be solely individual, based on the features of the environment, financial position, type of body.

Prepare to cover the case in advance:

On the side covers should use a thick layer of plywood. This is done so that it can withstand the weight of the furniture, which will be mounted directly on it.

Camper

Water supply

The prerequisite for water supply at home on wheels - it must have flow of flow water. To implement this, you should install a couple of canister with water under the sink. The installed pump will produce the necessary water flow to the crane.

Gasification and electricity

Installation of the hose for gas and electricians must be entrusted with extremely qualified specialists. With the slightest error of the independent installation, this can lead to a deplorable outcome.

Calon with propane can be used for cooking. You can do without it without it, replacing the container on the usual electric stove. Store the cylinder is necessary in a separate place.

The cherry electricity system consists of a charger, battery, control panels and wire system.

Gasification and electricity in an "Camper-Trailer" type is played by a very important role. In the case of departure to nature, the autonomy of both systems should be at the maximum level.

Furniture

If you wish, you can use absolutely any furniture as you like. You can purchase elements of new furniture or design and make it yourself.

A car on the wheels, and even equipped with your own hands, is the dream of many lovers of auto travel and outdoor activities in nature. It provides its owner an amazing freedom when traveling, freeing from the need to search and book a hotel, acquire tickets, pack the suitcases, etc. In addition, its own car can easily travel even a large family, including pets - for this it is necessary to use appropriate furniture , as a rule, transforming.

When for the first time appeared on the road an auto trailer on wheels to answer rather difficult. The first such experience was implemented by Jennings in the 38th year of the last century, although homemade samples of highways appeared much earlier. All autodoma on wheels can be equipped with almost all the necessary attributes of the usual and comfortable life - a bathroom, shower, a gas stove, a full-fledged bedroom, which are present even in the smallest auto-volumes, as the basis of which budget Gazelle is often held in Russia.

Depending on what kind of motor belongs to the wheel on wheels, it can be:

trailed;
van;
combined.

Autodom - Comfort Categories

According to the generally accepted classification, all autooms on wheels are divided into three main class.

Attention! Any autod class "A", made on the basis of a bus or truck, according to the transport classification requires the rights of the category "C" by the driver.

Speaking about the classification of the "Wheel House", the following concepts should be highlighted:

House Tent - Comfort and Easy

Another option of such a trailer can be viewed on the video:

How to make an autode on wheels do it yourself

In order to make an autode on wheels with your own hands, you can use any minibus, a cargo car or even a bus. In order to create it, you will need to make a lot of effort, time, and be prepared for quite serious material investments, which subsequently pay upon comfort when traveling in its own auto farm.

The process of turning the standard Gazelles in an autode on wheels will necessarily be accompanied by a number of works that are mandatory:

In the case when the wheels trailer house is created for long-term travel, it is desirable to provide for a good audio video system and satellite TV. If financial capabilities allow, it will be a good option to install solar panels that will extend the resource of the generator.

Attention! In most cases, the re-equipment of the vehicle in the trailer Avtodom requires to pre-bind all the "alterations" to avoid legal problems in the future.

Internal work

Many lovers travel comfortably interested in the question - how much costs authod on wheels in Russia, but learning the cost of the finished option prefers to engage in the creation of the autodoma with their own hands. And this is not deprived of meaning, because to make a car on wheels from Gazelle with their own hands by any person, ready to attach a certain amount of effort and spend its time.

The first thing that will be required to be made inside the cabin of the future autodoma on wheels is to dismantle the partition located behind the passenger seats. If it is attached by bolts, there will be no problems if the welded connection is used, the Bulgarian will be required. After dismantling, you should completely free the interior from the interior decoration. In parallel, it is worth checking the metal parts for the presence of corrosion foci. Take measures to eliminate them remembering that it will be much more difficult to disassemble the finished car.

Before proceeding with the insulation and interior of the autoomom, it is necessary to thoroughly consider the water and power supply system, since all pipes and electrical cables are better hidden under the trim - this will avoid their accidental damage. After that, an autode on wheels on the basis of Gazelle requires serious insulation. In addition to special materials with vibration insulating characteristics, basalt mineral wool or extruded polystyrene foam can be used for auto far.

Certain ideas for creating your own project can be "borrow" from manufacturers of such houses, looking at the following video:

Gas and electrical equipment should be entrusted to professionals

An important point for the autodoma is the correct calculation of the battery power. To ensure maximum autonomy, you should summarize the daily power consumption of all devices present in the autodomome. The resulting value in watts will be required to divide by 12 (V), resulting in a value in amps-hours (AH) - it is precisely it is indicated on the battery and allows you to judge its power. So, when energy consumption in an autodomome 50-60 AH / day, optimally acquire a battery in 120-150 AH. Such a car machine on wheels will be able to function offline two days. It is advisable to provide an external socket to recharging the autodoma battery in the parking lots.

Furniture for home-van on wheels

Despite the fact that it will not be a problem in the purchase of finished furniture for autoomom, according to reviews, it is not able to satisfy all the requests of the car owners, especially creating an authome on wheels on their own drawings. Therefore, the optimal option becomes either its independent manufacture, or an individual order on furniture production.

This type of recreation and travel option uses lovers of freedom and independence from tickets and flights. This is a good decision to have a trip to the rest at the same time both the car and housing. Thanks to the presence of a mobile home, the family can travel in a comfortable environment and stop where it wants and when I want to bind to time. Campgrounds acquired their popularity at the beginning of the 20th century.

House on wheels do it yourself

By this independent rest, you can see the places that unavailable from an airplane or train. In addition, camping while repairs in the apartment or building a house on the site can serve as temporary housing. You can also rent a truck when there are no travels in the plans.

The cost of such pleasure is rather big, some options reach and prices of the ordinary apartment, but to save funds, you can create a camping or an autode personally.

Variants of large campgrounds are converted from buses and overall vans, but it is too expensive for those who do not feel sorry to spend not small money for such megakomfort.

Variants of Campgrounds

There are three budget option For self-taking:

For the construction of the Avtomom, you need it:

Have wheels.
Visually draw a house-camping plan, drawings are one of the main points in the creation of a mini autoomom.

When drawing up a plan, you need to think over all those comfort details that are in a regular apartment.

Domestic communications Avtodomom

As in any ordinary house in campsite too need communications - It is electricity, water, gas, toilet and, perhaps, shower. Without these amenities, mobile housing will not be comfortable. In order for the campsite to be light, it is desirable to purchase a battery battery and a device for recharging. It is necessary to think about the inner wiring in advance. It is necessary to take into account the external connections when charging and the fact that they have different tanks.

To drain waste through the hose, hidden in the floor it is easier to use the usual bucket by placing it under the body of your autodoma. Water for the kitchen can be stored in large capacities, immersing the pumps in them to feed it into the crane. To merge used water, the tank is also used inside or outside the room. A small shower can be constructed as a mixer attached, for example, over a sink.

Unfortunately, the usual toilet will not work in a mobile home, because there is no place for the sink of waste difficult to be permanent. Here it makes a beautiful look.

For the lighting system in the campsite will be required :

battery;
charging;
wiring.

What is needed for heating in its auto.

Introduces an autonomous heater, you can buy a battery and a gas cylinder, because it is also useful in the kitchen and the refrigerator. Do not use a lot electrical devices and technicians for two reasons is additional flow Electricity and load on wiring, as it is a small room compared to the house. Electrician services need to be used when working with gas, since it is very risky himself, if you are not an electrician.

Interior arrangement of camping

Ventilation system.

It is also important to deal with ventilation so as not to clog the smell room.

The location of the holes is important because it is better not to put them into sight from the consideration of beauty. It is best to place them in the bottom of the walls above the floor, you can also put a gas cylinder.

Furniture.

Practicality and compactness in the placement of furniture is a pledge of comfort in campsite, given the presence of a small space, as well as layout. Folded or retractable bedrooms, tables with traditional stools and everything in such a spirit will create the necessary comfort and the desire to relax in the personally made auto farm. There are special compact headsets on sale, but if there is a desire and time, it is quite possible to make furniture yourself, using old boards, countertops, and for the sofa and chairs, take the seat from the same car or old wheels, too, can be converted into chairs or stools.

Camping joorer.

In a similar home, if it is one-storey it is recommended to make two windows so that you do not have to spend the electrician during the day. The door is better to make a bivalve, so that it does not make and not blown the wind into the room.

Minibus or automotive, scattering the principle of transformation of each.

To begin reincarnation of a minibus of type "Gazelle" to the campsite you need to clear the body, remove seats and upholstery, make holes for windows and valve for gas supply:

Body preparation

For body processing you need:

anti-corrosion is applied primer, and then you need to warm the walls, gender and ceiling with thermal insulation;
coated plywood or carpet coating;
that glue that plywood is needed good qualityso that the insulation serves you for a long time;
after the warming stage, you can proceed to electricity and gas, then go to the kitchen, think over the sink and ovens, install tanks for water, bathroom and at the end to place the rest of the furniture for recreation, beds, chairs or stools, lockers and shelves depending on the existing space.

The house from the trailer is different, there are only wheels and you need to do everything from scratch, like on the site, first build a box - the future room.

Housing from the trailer is made as follows:

To make the roof in the auto house, you will need :

collect the framework of bearing structures - beams if you want a triangular roof;
next, we are wearing plywood;
it is necessary to cover it with water-repellent material.

After that, you can make and attach to the rear wall with the outer side of the drain from the rain and from the inside for the drain of waste. Also need to bind the outer walls. Internal wiring and thermal insulation need to close the fiberboard and on the stage of manufacturing one or two doors.

To protect the tree from a drying, and pests need to be covered outside and inside the wall by primer, apply the paint layer on top. For aesthetic look, you need to close the threaded holes and also cover the paint. All these procedures will reliably protect the house from the influence of external harmful factors. At the end of the work, since this is a trailer, then you need to install headlights and wings.

Similar Mobile Dominations are divided into three categories:

Traveling in his homemade house on wheels, of course, nice and comfortable. However, it is necessary to solve for yourself if you can independently master all the work on the construction of the Avtomom.

Such a house is not only convenient and comfortable, but also saves money, as the question of the search for housing disappears. On the advantages of the Avtomom can be told for a long time, and there are really many of them. However, one minus is - the car-house on wheels is not from cheap pleasures. But if you have patience and hard work, there is a way out - build a mobile home on wheels with your own hands.

The main thing is that the driver is experienced, with good driving experience and of course, with a positive attitude towards this type of transport.

House on wheels: What you need for comfort

Although the house will be in the form of mobile housing, but this does not mean that it should not be comfortable and satisfy the minimum needs of the owners.

Lighting at home

To supply light to the mobile home, it will be necessary:

battery battery type;
device charger;
wire system for subsequent electrical wiring;
panel for controlling electricity supply.

Heating for home

Air (ventilation) for home

Very important point is ventilation, especially when using gas. In this case, the holes must be several, and one of them will be as low as possible.

For comfort: water, bathroom, kitchen

No accommodation will be comfortable if it is missing elementary amenities. Well think about exactly where the kitchen will be portable to the size of the "mini" and shower. Also do not forget about tanks with water and pumps for it.

Water that will merge, better send to a large bucket located under the body. To do this, you can use a special hose to be paved in the floor.

Furniture for auto farm

With furniture can occur certain difficulties, because it should be as compact as possible. For such housing, a folding furniture is used, it is fixed on the walls. Purchase such furniture in most cases is possible only to order, which is sufficiently expensive. But if you can make it yourself, it will significantly save funds.