MK Tarpan Work with additional mills. Cultivator Tarpan - Simple and reliable equipment

Cultivators "Tarpan" are quite common among land owners, as they are intended for processing the land with an area of \u200b\u200babout 15 acres. Such products are known for having high power and are reliable.

Pluses of cultivators

Cultivators called Tarpan began to be created in 1991 and became the replacement of Motoblocks "Russia". Initially, motors of domestic production were installed in these products, so they were not quite popular. But after installing a more powerful engine from BRIGGS & Stratton, the described cultivators have become more popular.

A special feature of the models has become a reliable worm gearbox, which was almost eternal. The power of products was equal to 6 horsepower. The described products can be launched 2 parts that allows you to translate them in the car without experiencing discomfort.

The advantages of the described cultivators include:

Having considered all the advantages, it can be understood that the products described can be used for work in almost any conditions and for various work on the processing of the land plot.

Disadvantages of cultivators "Tarpan"

The disadvantages of the described technique include the absence of the reverse. Because of this, the cultivator is inconvenient to use on sites where everything is planted. It is worth noting the inconvenient location of the gas lever. He has to be pressed with a thumb right hand, so the brush quickly gets tired while working.

Another disadvantage is a straight cutting angle cutter. Because of this, they wound the grass and press it into the soil. In areas with an abundance of herbs, you have to constantly clean the cutters, interrupting work.

It is also worth noting that replacing the oil in Tarpan motor-cultivators is inconvenient. This is due to the fact that to make such actions you need to first remove the clutch, and then unscrew several nuts that are located on the frame. Owners of such equipment should be remembered that it cannot be kept in a taller position for a long time, as the oil begins to leak into the air filter.

Device of cultivators

Popular models of cultivators "Tarpan" are four-stroke engines operating on gasoline. Such devices have air cooling. The power of many models is 6.5 horsepower.

Also, many models are equipped with Honda engines having a power of 5.5 hp Also used "Champion" engines, thanks to which the aggregates are fairly cheap.

On the devices described, rotational type mills are installed. Thanks to this, you can adjust the depth of plowing of the Earth. Motor-cultivators "Tarpan" can loose soil to a depth of about 20 cm. The width of the soil plowing by such products can be from 35 to 100 cm.

Handles of cultivators can be adjusted in height, so they will use them convenient to people of different growth. The handles are rubberized, due to which the hands do not scoop them while working.

Hinged Equipment for Cultivator

The following types of equipment are used with the devices described:

1. Pololeans. Such products are knives and blades that are installed on the shafts of the gearbox. They are designed to conduct aeronautical work, bursting and flowing soil. These elements are made of durable steel, which can withstand heavy loads.
2. Hiller. That hinged equipment Used most often. It is designed to enhance, plowing, as well as to create a bed. When performing work, weeds are removed by such attachments. Occupners can be single-row, double row or disk. The first type of tool is used most often. Disc occupants are more efficient.
3. Grunate. Such equipment is set to ensure that the cultivator does not stop while working with the soil.
4. Plow. This equipment is used for deep soil plowing. The plow is necessary when planting potatoes and some other cultures.
5. Cutters. Such products are somewhat curved knives that are fixed on the shaft. For a cultivator, you can purchase both sharpened products and cutters with a semicircular edge. The first reduce the load on the engine, but the weed roots are left in the ground. The second type cutters are often stuck in the ground, but weighing the weeds more efficiently.
6. Prefix used for snow cleaning on the plot. Such products are not used on all models "Tarpan".

All presented attached equipment allows the use of a cultivator during various work on the site.

Modifications of cultivators

The most common models are "TMZ-MK-03" and "TMZ-MK-04". These motorcultivators are reliable and allow you to quickly perform work on the site. These models are installed both Japanese and American engines. These models differ only in the gear ratio of the gearbox.

More budget models Cultivators are equipped with "Champion" engines produced in China. A less common product is a device with Zongshen motor.

Specifications "TMZ-MK-03"

The specified cultivator has the BRIGGS & Stratton engine, which is produced in America. It works on gasoline and is a 4-stroke. The power of the engine of this model is 6 horsepower, which is quite enough for most works carried out on the site.

Motor-cultivator "Tarpan TMZ" has a centrifugal automatic clutch. Treatment depth When using this model is 20 cm. The capture width can be 35, 70 and 100 cm. Fuel consumption of this unit is 1.1 l / h. Mass of the motor-tank is 45 kg. This model includes standard attachments (plows, cutters, sakes, pololics).

Electrocultivator "03 EK"

This model is easy to control and environmentally friendly, so it choose many land owners. The weight of the device is only 45 kg, so the person of any physique can use it.

Due to the fact that the engine power is 2200 W, the cultivator can work on any soil. It is worth noting that the maximum depth of surface study by such a product is 25 cm.

The diameter cutter for such a cultivator is 27 cm. It is worth noting that this optional equipment Made of high quality metal, which can withstand heavy loads.

Electric cultivator "Tarpan" is suitable for working on a small area or in a greenhouse. The handles of this cultivator can be adjusted, so it will be convenient for people of any growth. The described product is attached by standard attachments, such as a plow, a skipper and other details. Reviews about this unit say that it is quite reliable and durable.

10184 07/28/2019 7 min.

- This is not only a wild horse breed, which no longer exists on our land. So called domestic cultivatorsWhat is used to treat Earth to five to twenty acres.

They are popular with users due to their reliability and productive motors of American and European manufacturers.

About manufacturer

This model came up with Tula engineers in 91, as a simple and reliable replacement of Motoblock "Rus", which was produced by Tulamashzavod.

First, Tarpan was unprofitable, he did not use special demand, but after it was improved and equipped with a productive BRIGGS & STRATTON MOTOR Causes went much better. Since 97, cultivators have launched into mass production.

Today it manufactures the specialized company "Tarpan", which is subsidiary "Tulamashzavoda", which is located on the historic center - Frolovskaya Sloboda, which is famous for its experts.

On earth, which belongs to a legal entity today, in 79, the nineteenth century Baitsurovsky was built, which produced different cast iron and copper products.

Tulamashzavod is a well-known company that specializes in mechanical engineering.

The company has in its composition, which are equipped with new equipment and leading technologies. All necessary information You can find on the official site Tar-pan.ru.

In the composition of production: stockpiles, electroplating and processing high temperatures, Production of tools, details, wood processing.

Next to the classic equipment uses automatic and semi-automatic devices that allow you to maintain a program in the dialog. This ensures high technological flexibility of production.

To reduce training time is often used through Automatic Designing of Elements and Snap (from external indicators before creating control programs for machines).

For more information about the cultivator Tarpan, look at the video:

Popular models

The first motor-cultivator from the series "Tarpan" with two-stroke motor Productivity 6.2 hp was released from the conveyor in 93 years. He immediately proven himself in the market with positiveBut because of some, production facilities was not so popular among farmers.

03

Thanks to the work of engineers, in a few years on domestic market Presented the model "Tarpan-03". She currently does not lose its leading position on russian market - the consumer is buying up to thousands of such cultivators every day.

Plant engineers supplemented a model with various attachments that can be used regardless of the year: For winter, you can use a rotary type snow blower, while the width of its capture will be 75 cm. It throws the snow to 5 meters, you can also purchase ice divider to clean the track .

Regardless of the time of the year with Tarpan cultivators, you can carry out all gardening work with a plow, rotary cutter (available), occupy, flat cut, robble to grind and align soil, collecting for weeds and other attachments.

The cultivator can be used as a lawn mower, And in the fall, the roots can be digging in the fall, and prepare the ground for winter.

The resource of the motor is 1000 hours. Centrifugal clutch automatic allows you to disassemble a model into several devices, which can be easily transported and stored.

Thanks to the worm reducer, you can abandon the unreliable belt and chain gears, which are installed on the motoblock.

Thanks to the advanced design of the steering rod, the steering wheel can be rotated both in the lying and in a standing plane, thanks to this, the operator will go on the side of the unit, while the explosion soil is not covered.

Specifications:

• Motor: Briggs and Stratton and / from 6.0 l. from.
• Motor performance: 6.0 hp at 3600 rpm.
• Cylinder volume: 190 cm3.
• Continuous cooling with air.
• Starts when manual start.
• There is only one transmission.
• Fuel tank volume: 3.8 l.
• Oil volume in the motor: 0.6 l.
• Fuel consumption: 1.5 l / h.
• Power: 0.06 ha / h.
• Mill at maximum turnover: 100-120 rpm.
• Cultivational width: 350-700 mm and depth 200 mm.
• Parameters (length / width / height): 130 (76) / 70/106 (75) See
• Weight: 45 thousand grams.
• Price: 18 thousand rubles.

Detailed video about this model.

Conducting that it is confident to lead and develop a business in the conditions of the modern market, which is constantly changing, it is necessary to produce high-quality, competitive, reliable and affordable techniques, the manufacturer updates its model range annually, manufactured from conveyors.

031, 04, 07

IN last years Near basic models 031, 04, 07 Motor Cultivators model.

Specifications:

• Motor capacity: 5 hp
• Motor type: single-cylinder 4-stroke, top-type shaft.
• Clutch type: automatic, centrifugal, dry.
• This cultivator "Tarpan" device of a worm and single-stage gearbox.
• Transmissions: 1, forward.
• Hot mixture: gasoline.
• Clutch: Centrifugal coupling.
• Width and depth of processing: 360 x 200 mm.
• Weight 28 thousand grams.
• Price: 11 thousand rubles.

04

Compact model For a plot of medium sizes, as equipped with a pair of wheels, so that the cultivator moved during operation and the coulter, due to which the depth of the stroke of the cutter is adjusted.

"Tarpan-04" is very easy to manage, it has only one gas lever and the "Stop" button.

The main highlight of this model is a relatively productive motor for medium sections. Thanks to this motor, as well as low turnover Cutters (100-120 per minute) The model is perfectly reappearing the soil on the "bayonet shovel".

Productive and affordable available price segment.

Specifications:

• Motor: Briggs & Strathon (USA).
• Motor Type: single-cylinder, 4x-cloth carburetor type.
• Productivity: 6.0.
• Works on: gasoline.
• One transmission, no reverse.
• Mass, gr: 45 thousand
• Max. Treatment depth, cm: 20.
• Parameters, cm: 135 x 60 x 110.
• Price: 26 thousand rubles.

07-01

Manual

Important for several days after the purchase does not use the unit on full power - It must be remembered, the first 24 hours the device must be passed down with a run. Therefore, it is better to process the same bed in several stages, with each time you increase the depth of processing.

Start

Before launching is worth check oil level, The operation of the engine is securely secured by the power unit with another block, which performs an additional feature.

To start the motor, when the control lever is clamped (the position of the engine speed "quickly") is prohibited, because the device's clutch works automatically when the engine is achieved by the desired revolution indicator, which is more than turnover at idle.

Processing of soil

It is necessary to get up near the steering wheel and tightly hold the handle. Do not strongly press the lever, slightly increase the number of rotation of the engine.

When the motor reaches the desired number of revolutions, the centrifugal clutch will automatically work, and the shaft of the gearbox starts spinning.

At this time, the device will start moving. Soil processing deep into mills Determined by the position of the depth regulatorWhat can change when it is permutable in the bracket by holes, which is in the regulator.

Turn off the device

To do this, you need to lower the control lever. He will return to the original position idle move As a result of the operation of the return spring. Then pull it down until the stop and the motor will stop working.

Malfunctions and repair

"Tarpan" Cultivator, instruction manual indicates some causes of breakage. Motor Unable to run Or happens with difficulty. This can occur due to the configuration of the motor revolutions, or the carburetor does not fuel.

To eliminate this malfunction you need:

• Check the availability of fuel in the tank.
• Check the candle gap.
• If necessary, clean the candle from Nagara or replace it.
• Check fit in the carburetor.

You can also warm the motor.

It begins to overheat, because the cooling system is clogged and the air filter.

In order for the engine to work at normal temperatures, it is necessary to clean the cooling system and air filter, or replace.

The engine does not work at maximum revs. Often this is due to the fact that air filters clogged And subject to replacement. To eliminate this malfunction, it is necessary to clean or replace the filter.

Malfunctions often happen due to the fault of the operator due to the irrational use of technology, so before you begin to work, be sure to read the instructions. If you have not saved the original, you can find it on the Internet, in one of the search engines write: "Tarpan cultivator manual manual."

The "Tarpan" model range is constantly updated and enhanced in its technical specifications.

Output

The main feature of the cultivators is pretty productive motor Compared to other models of this species. The only minus model Row: No rear transmission.

People growing agriculture on the site are almost always used.

If you are in the number of summer houses that are seriously suitable for the care of vegetable garden and garden, then you probably can't imagine your life without a fuelboard. If before this point you coped with the tasks with the help of other equipment, it is worth thinking about the acquisition of the aforementioned device.

With it, you can treat land, and health does not suffer. Undoubtedly, this technique is quite expensive, but there is such a number of functions that only for the year will justify the acquisition. Land work is performed as the main task of the motoblocks, this equipment will allow you to pumped, dip and cut the rows. In addition, the motoblock is able to help a person to care for a lawn. For this, the kit comes which cuts the grass by type of trimmer, capturing approximately meter of the lawn.

If you add more to the nozzle in the form of aurator, then the lawn will receive additional oxygen power, and therefore the grass will be thicker. Now that all the advantages of the described equipment are familiar to you, it is worth paying attention to manufacturers. Among other models, you can find on the market of the relevant goods of the Motoblock "Tarpan", which will be discussed below.

Description of the motoblock of the brand "Tarpan Zongshen"

This equipment is not as expensive, the price is 27,300 rubles, but by paying, you will receive a device that is used to treat the soil in gardening and gardening conditions. It works at the expense of the four-stroke engine, the power of which is 5.5 liters. from. The engine is complemented by the oil level sensor. The manufacturer took care of the convenience of operation, equipping the Tarpan's motoblock by wheels with a special pattern of a tread, which guarantees high permeability.

Using the unit, you can use one of two speeds, which contributes to the best maneuverability. In height of the motor-block can be adjusted using the handle, the position in height will ensure the convenient operation of the aggregate. If necessary, you can additionally purchase attachments that will become an effective equipment. But the presence of a power take-off shaft says that you can apply an active hitch.

Main technical characteristics

The "Tarpan" motoblock described in the article, the price of which may seem sufficiently impressive, has unique technical characteristics. The equipment is built in the engine Zongshen 168 FA, and the width of the plowing is 70 cm. The power transfer of power is carried out due to the power take-off shaft. The engine volume is 163 cm 3, and the diameter of the cutter is 32 cm. The clutch is a belt, there is no electric power supply in the equipment. The power of the unit is 4.1 kW, and in horsepower This value is 5.5. Using this motoblock "Tarpan", you can deepen in the ground by 20 cm, weighs the device 75 kg, installed in it gas enginevolume fuel tank It is 3.6 liters. The manufacturer provided the device with a gear gear type.

Key Features

Considering the features of the motoblock, you can highlight:

• excellent permeability;
• comfortable management;
• simply refueling.

As for the first characteristic, it is ensured due to large wheels, because the protector with an aggressive pattern will be held on any surface, even if even the landscape will not be smooth. The tray of the motoblock allows you to achieve comfortable control, it can be adjusted, which makes the operation convenient. The fuel tank of the motoblock is located in an easily accessible place, so in a matter of seconds you can deliver the tank. Its neck is quite wide, which facilitates the process.

Main advantages

The "Tarpan" motoblock "described in the article has many advantages, among them should be allocated reliable engine, The presence of a power take-off shaft, as well as a wide range of hinged equipment. For the best maneuverability, the manufacturer provided the device with a reverse, in addition, you can adjust even the depth of plowing. It is not necessary to be afraid that the motor-block will not cope with clay soil, because it is equipped with a powerful engine, which will be for both such works.

Cost of hinged equipment

If you are interested in the products of the brand "Tarpan", then it may be necessary to additionally purchase attachments for motor-cultivators. For example, a skieper, which is used with Tarpan 03 models and Tarpan 04, can be purchased for 940 rubles. Then the frame with transport wheels will cost the consumer in 1033 rubles.

Sometimes buyers are also interested in the soils. If their size is equal to 260 x 80 mm, the kit will have to pay 1480 rubles. In size of 400 x 170 and 500 x 170 mm, soils will cost 1790 rubles. Hinged equipment for motor-cultivators is also potatoes that cost 624 rubles. It will cost 1100 rubles, and pololics, more precisely, their set - at 1160 rubles. Motor unit universal coupling used for joining Motoblock costs 2100 rub., Cutter "Goose paws" - 2880 rub.

Manufacturer of Motoblock Tarpan - Production Association Tulaamashzavod, one of the largest holdings, which includes the parent joint-stock company Tulamashzavod and twenty subsidiaries, equally oriented both on the production of products for the defense industry and for the production of civilian products.

Tulamashzavod is located in a historic place - the Tula Frolov Sloboda, known for its masters. On the territory belonging to the joint stock company today, in 1879, the Baitsurovsky plant was organized, which produced a variety of iron and copper products.

In 1912, the company became part of the Imperial Tula Armory as a "New Plant" - so called Tulyaki. Throughout its history, the plant has always been known as defense and civil products - not only in Russia, but also abroad.

One of the subsidiaries of LLC Tulamash-Tarpan, the specialization is the production, design and sale of mini-tech windows in Russia. The wide dealer network of more than 70 representative offices in the regions of Russia and the Middle abroad allows the marketing service every year to increase sales to expand the scope of implementation of Tarpan technology.

Official site of the manufacturer of the Motoblock Tarpan - www.tulamash.ru/static/tarpan/index.html.

Products under the brand name "Tarpan" are widely known and distributed throughout Russia and in the CIS countries. Motor-cultivators and motoblocks "Tarpan" is russian quality with world level of efficiency and durability.

Main parameters and technical characteristics of Motoblock Tarpanpan

P.P.	Name of parameter	unit of measurement	The value of the parameter
1.	Dimensions, no more -length -width -height	mM.	1400 560 1090
2.	Weight	kg	67
3.	Soil processing width	mM.	700+20
	- with additional mills	mM.	1100
4.	Diameter cutter	mM.	320
5.	Depth of loosening maxim	mM.	200+10
6.	Limit angles of inclination during operation (longitudinal and transverse), no more	grad.	15
7.	engine's type	Single-cylinder, carburetor, 4-stroke with forced air cooled Working volume 160 cm 3, max. Power - not less than 5.5 hp, Start of manual action.
8.	Maximum engine power, not less	l.S.	5,5
9.	Maximum torque, not less	N * M.	8,5
10.	Hourly fuel consumption, no more	l / C.	1,1
11.	Fuel tank capacity, l	l.	1,1
12.	Number of gears, back / back		2/1
13.	Motoblock weight	kg	68
14	Clutch		Klinorenny with an inclusion lever
15.	Reducer		Gear with chain transmission

Motoblock "Tarpan-07" - multifunctional, light, compact and user-friendly unit. Designed to perform agricultural work on household sections, in gardens and gardens. Motoblock is easy to operate. Powerful four-stroke engine Allows you to use a motoblock in various business work.

Included with mounted guns of the motoblock can plow light soils, harrow, cultivate, cut the furrows, dip and dig root root, mow the grass, transport loads, etc.

Motoroblock Supplies Tarpan:

Motoroblock with wheels on rubber move, cultivator left, cultivator Right, depth control, transition sleeve for connecting metal wheels, zip kit; operational documentation.

Motoblock Tarpan - Hinged Equipment

Name	Technical conditions (node \u200b\u200bnumber)	Manufacturer
Trolley trailed TPM.	TU 4373-006-35757432-98	NMZ "Energia", Great Novgorod
Trolley trailed TPM-350-1	-
Aggregate mounted motor-block ANM-4 (hitch)	TU 4737-001-12352276-94	Mobil-K LLC, Gagarin, Smolensk region.
KV-2 rooter	-	Mobil-K LLC, Gagarin, Smolensk region.
Metal wheels with soils500mm	-	Mobil-K LLC, Gagarin, Smolensk region.
Plow	-	Mobil-K LLC, Gagarin, Smolensk region.
Shovel Motoblock	-	Mobil-K LLC, Gagarin, Smolensk region.
Right / left pololics	097 181 020/097 181 030	LLC "Tarpan", Tula
Extension	097 183 000	LLC "Tarpan", Tula
Hiller	093 182 000	LLC "Tarpan", Tula
	TU 1-01-0800-87	OJSC "Cavier" Kaluga
Motor-block brush	TU 4737-06-12352276-99	Mobil-K LLC, Gagarin, Smolensk region.
Snowboard CMB-1M	TU 4737-011-500-98-731-03	ZAO NMZ Novgorod
Extension	097 183 000	LLC "Tarpan", Tula
Hiller	093 182 000	LLC "Tarpan", Tula
Mower rotary attached "Zarya"	TU 1-01-0800-87	OJSC "Cavier" Kaluga
Motor-block brush	TU 4737-06-12352276-99	Mobil-K LLC, Gagarin, Smolensk region.
Snowboard CMB-1M	TU 4737-011-500-98-731-03	ZAO NMZ Novgorod

Collapsible motor-block "Tarpan 07-01 collapsible"

The design of the motoblock allows you to transport it in the trunk a passenger car With minimal disassembly. The motoblock consists of two main parts: a power unit and a gear unit. The power unit (Figure 1) consists of a power unit 1 with fuel equipment 2 and steering 3.

The gear unit (Figure 2) includes a gearbox transmission box with gear gear 1, wheels or mills-cultivators 2, protective cover 3, rear bracket 4 with a depth regulator 5, front 6 bracket.

A removable non-reference holder 4 (Figure 1) is installed between the power and gear units (Figure 1), which shares and simultaneously connect these two units.

Disassembly of the motoblock.

To disassemble a motoblock, remove the protective cover 2 (Figure 3). Remove the belt with a large pulley. Remove the fastening bolts power aggregate To the gear unit 3 (2 pcs) and the mounting bolt to the Reductor 4. Fold the steering wheel in the transport position (Figure 1). Remove from the gear unit.

Assembling Motoblock Tarpan.

Install the power unit on the gearbox and secure it with bolts. Install the belt 1 (Figure 3). Check the belt tension. Control of belt tension according to claim 2.3.1.3. Motor-block manuals "Tarpan 07-01". With each subsequent installation of the power unit on the gearbox of additional adjustment of the belt tension is not required. If necessary, loosen the engine mounting bolts to the non-reference holder and move the engine along the groove to the required tension. Secure the engine. Install the protective cover 2. The remaining requirements for maintenance and operation, see the Tarpan 07-01 Motor Windlock Operation Manual.

Motoblock Tarpan - Operating Instructions TMZ-MB-07-01- download

Motoblock Tarpan - Photo

Today, tarphans are called not only the unbridled wild horses that have previously existed on our planet. This name was received by domestic motor-cultivators, which are meant for plowing plots, with an area of \u200b\u200bup to 15 acres. They are distinguished by a reliable powerful engine, high quality parts and excellent operating performance.

Advantages and disadvantages of brand cultivators Tarpan

Cultivator Tarpan has more than 25 years of history. The first models of the family of aggregates were not very reliable, so they wanted to refuse them. However, over time, the manufacturer has fallen into production more advanced technologies, thanks to which the design of the models was constantly improved. Modern representatives of S. engine Honda. differ by their high reliability. They are supplied with a practically eternal worm-type gearbox.

A powerful motor is also capable of please buyers. In the current grades, the cultivator Tarpan is available with engines, with a capacity of 5.5 and 6 liters. from.

Among the main advantages of the unit allocated:

• The presence of an automatic centrifugal clutch, which allows us to lay a cultivator into 2 parts so that it is easier to transport;
• An excellent combination of an imported engine and durable domestic "iron" allows you to process even heavy soils;
• Good processing speed - the cultivator is able to plow up to 10 acres in 5 hours;
• The unit requires minimal maintenance and adjustments, it is convenient in control;
• The cultivator has a slight weight, so that it can be turned over alone;
• Perfectly sharpened reliable cutters;
• The vertical motor is easily and quickly removed;
• You can use a wide range of hinged inventory.

In addition to all the advantages, the motor-cultivator Tarpan has some drawbacks. First, the manufacturer did not provide reversewhich is why the model on small and abundantly planted beds is very uncomfortable. Secondly, the thumb quickly gets tired of constant piping of the gas lever. Thirdly, the cutters quickly wound weeds, as they are located at right angles. Fourth, inconvenient change motor oil - It is required to constantly remove the clutch and unscrew the nuts.

Features of Cultivators Tarpan.

Russian Motor Cultivators of the Tarpan brand are optimally suitable for farmers who own sites, an area of \u200b\u200bno more than 15 acres. This technique has deserved recognition thanks to a reliable motor and high-quality assembly. Most of the models are equipped with American BRIGGS & Stratton, with a capacity of 5 to 6 liters. from. The main features of the aggregates include:

• Almost eternal worm-type gearbox;
• High-quality transmission, which gives you the opportunity to move at several speeds;
• The plowing depth is from 16 to 25 cm.;
• The bandwidth ranges in the range of 25-100 cm;
• Improved clutch due to the use of more reliable candle;
• The ability to use many options for attachments.

It is possible to exploit these cultivators Russian even at virgin. At the same time, the manufacturer promises quite high productivity - about 2 acres per hour of work.

More modern models Tarpan brands are equipped with improved Honda, Zongshen and Champion motors. They are less powerful, but the high quality of their assembly allows you to use the cultivator without surviving that it will heat up from overheating.

Constructive features of aggregates

Motor-cultivator Tarpan in the old configuration is equipped with four-stroke gasoline engine brands Briggs & Stratton Quantum, produced in America, although every year the manufacturer releases more and more models with japanese motor Honda. The power of the American engine is 6 liters. s., and Japanese - 5.5 liters. from. Each of the engines is equipped with an air cooling system, which allows the repair of the carburetor much less often than in the case of other brands with cultivators. This is due to the fact that the air falls not only to the engine for cooling, but also in the carburetor enriching fuel mixture. This process has a positive effect on the durability of the carburetor.

When working, the worm-type reducer transmits the engine speed on the cutters, which are supplied with the mechanism for adjusting the soil processing depth. In the maximum low position of the regulator, the cutter is lowered to a depth of 20 cm. The width of the strip covered during operation is from 35 to 100 cm. To move along the area, the cultivator is supplied with two wheels.

The aggregate controls are located on the steering wheel, which can be adjusted in height. Handles of the steering wheel have rubber coating and are quite convenient for coverage. The tilt of the steering rod can be adjusted to change the slope of the unit Il to deploy it.

Popular modifications of aggregate

The most popular is the configuration of Tarpan TMZ-MK 03 and Tarpan TMZ-MK 04.

Motor Cultivator Tarpan TMZ-MK 03

Specifications:

• Engine Manufacturer - Gasoline 4-Tracked Briggs
• Engine power - 6.0 hp;
• Clutch - dry, automatic, centrifugal;
• Reducer - single-speed, worm in an oil bath;
• Capture width - 350, 700, 1000 mm;
• Overall dimensions (control handles are composed) - 1300x700x1060 mm;
• Mass - 45 kg;
• The number of cutters included: 4 pcs.
• Rotation direction: Direct
• Cultivation Depth: 20 cm
• Engine power: 4.45 kW / 6.05 hp
• Engine volume: 190 cubic meters. cm

Cultivator device Tarpan TMZ MK-03

The cultivator Tarpan TMZ MK-03 has a modular design, due to which it can be easily transported between the house and the cottage. This model You can almost completely disassemble with the Briggs & Stratton engine, dismantle the mounted inventory and the motor itself. The single-cylinder four-stroke engine of the unit develops the power of 6 liters. p., and its resource fluctuates within 1 thousand hours. On the market there are also other modifications equipped with Japanese engines. For example, the TMZ MK-04 model is supplied japanese engine Honda, developing power in 5.5 liters. from.

Transmission of engine speeds on the working element is carried out by means of a worm gearbox. In practice, it shows itself much more reliable than the belt and chain transmission. The design of the gearbox is located in the oil "bath". Despite the high degree of reliability, the gearbox has one drawback - it allows you to move only on one front transmission.

The width of the covered band can be regulated depending on the type of attachment. If the unit works in regular equipmentThe width will be 75 cm. With an additional canopy, the width can be increased to 1 m. Cultivator Tarpan TMZ MK-03 can be used with such an inventory:

• Lawn mower;
• Robbles;
• Ricker;
• Rotational cutter;
• Plow;
• Flat;
• Ice climber.

You can also apply rotary snow plows. Snow cast range will be 5 m. The physical mass of the unit without additional inventory is 45 kg. Small weight and height adjustable rod arms largely simplify the operation of the model.

It is also worth noting another version of the modification - Tarpan TMZ-ML 03 Champion. It is supplied with Chinese champion engines, so such a complete set is much cheaper than two previous analogues. Another a budget option - Aggregate Tarpan TMZ-MK 03, in which there is a Chinese engine brand Zongshen XP 200.

Among other variations with the Japanese engine, it is worth noting the model Tarpan TMZ-MK 07. It is much more expensive than all previous complete sets, as it allows the use of a plurality of overall attachment equipment, including a wide snow blower.

The domestic market of agricultural machinery is not too rich in motocultivators. Therefore, as soon as the motor-cultivator Tarpan TMZ MK-03 appeared on sale, he immediately attracted the attention of farmers. This model is a universal and fairly powerful unit that successfully copes with many tasks.

Fuel consumption by motor-cultivator depending on the loads

Despite the non-too high power of the unit and its modifications, it consumes a significant amount of fuel. In the process of plowing the soil, the model requires approximately 1.5 liters / h. This indicator may vary depending on the task being performed.

Thus, when processing solid soils, the cultivator consumes at least 1.8 l. / Hour of work. When cleaning snow, it "eats" at least 2 liters. Fuel. However, it is important to take into account that a certain amount of fuel leaves while driving a motor.

When the potato is emphasized, the cultivator requires, on average, 1.6 liters. Fuel, and when working with rakes - about 1.5 liters / h. Work.

Hinged inventory to work with the cultivator

Good power and reliable parts make it possible to use a wide range of hinged equipment. According to the instruction manual, together with the cultivator, you can apply:

• Suitable for the fight against weeds between rows. The distance between the rows should not be less than 30 cm;
• Rugberry - helps to make furrows, place a plot of beds, care for potatoes;
• Gruppes - crawling a cultivator and improve his hitch with earth;
• Special wheels with a frame make the movement of the cultivator more comfortable;
• Plow - used in order to deeper soil treatment.

Having bought some adaptations from this inventory, the owner of the cultivator will greatly facilitate landing and caring for the beds, and will save the mass of time and strength.