Official instruction for the driver of the harvesting machine. Vehicle driver job description

17.07.2020

FINAL PROVISIONS 5.1. Indeed to-qualifyingRevelopment of tariff-qualification acupuncture "Driver of the transport and cleaning machine" (RESOLUTION OF THE MINISTRICTRADER OF THE RUSSIAN FEDERATION OF 10.11.1992N31 "Food-Fiction and Qualification Characteristics for general-industry workers' professions"). 5.2. Familiarization of the employee with this Instruction is carried out by admission to work (before the signing of the employment contract). The fact of familiarization of the employee with this Instruction is confirmed (painting on a list of familiarization, which is an integral part of this Instruction (in the journal of familiarization with instructions); in the instance. Instructions stored at the employer; in other way) 5.3. .

Official instruction of a tractor for cleaning streets

Pass is prohibited, "High Voltage", "Dangerous For Life", "Do not include - people work. "3.9. When working with instrument and devices during the work shift, follow the safety requirements set forth in the "Instructions for labor protection when working with tools and adaptations" approved by CEO. 3.10.

During the management of the machine, the employee must: - maintain the speed of movement of the vehicle in accordance with the requirements of road traffic rules, road signs and taking into account meteorological conditions (on the territory of LLC "LLC" no more than 10 km / h); - Watch the testimony control devices; - periodically check and take measures to remove stones and other items stuck between the tires of the wheels.3.11. Submit a warning beep when people move on the way of movement of the harvesting machine.

Property Designer Tractorley

For non-fulfillment or improper performance of their official duties, provided for in this official instruction, within the limits defined by the current labor legislation of the Russian Federation. 4.2. For causing material damage to the employer - within the limits defined by the current labor and civil law of the Russian Federation.
4.3.

Important

For offenses committed in the process of carrying out their activities, within the limits defined by the current administrative, criminal, civil law of the Russian Federation. Head of the Structural Division (initials, surname) (signature) "" 20

Agreed: Head of the Legal Department (initials, surname) (signature) "" 20 g.

Error 404 page does not exist

The employee is responsible for violating labor protection requirements in accordance with the current legislation of the Russian Federation. 2. Requirements for labor protection before starting 2.1. Make sure in the health of workwear and other SIZ, wear them. In the pockets are forbidden to keep sharp, stitching items. The sleeves should be fastened, there must be no hanging ends on clothes.
It is forbidden to start work in a painful or tired condition. It is forbidden to work in shoes with open heel and sock.2.2.
Get a changeable task.2.3. Carefully examine the passport to the operated cleaning machine.2.4.

Transport and Cleaning Machine Driver Instructions

If signs of fire or fire are found to operate according to the instructions on fire safety measures in the territory, in buildings and structures approved in the organization. 4.6. With a sudden disconnection of electricity to immediately stop work.

Notify direct supervisor.4.7. If deficiencies are found in the cleaning machine, drown out the engine. Report immediately to the immediate supervisor. 5. Requirements for labor protection at the end of work 5.1. Strust engine.5.2. Install the gearbox in a neutral position. Brake cleaning machine parking brake.5.3.
Remove overalls and other PPEs, inspect, put in order and remove in the designated place. 5.4. Wash your face thoroughly and hands with warm water with soap .5.5. On all identified shortcomings in the work inform the direct supervisor.

Tractor driver-driver: duties and rights

Facials are allowed to operate no 18 years old, which have no contraindications to this work for health, which have passed the introductory and primary labor protection instructions, fire-fighting instructions, as well as trained in safe methods and techniques in the workplace and verification of knowledge of labor protection claims. The staff is obliged to undergo a re-briefing on labor protection at least 1 time in 6 months, a periodic physical examination - in accordance with the order of the Ministry of Health and Social Development No. 302n, another test of knowledge - at least 1 time at 12 months 1.4.

The employee is obliged to comply with the rules operating in the organization, work schedule, labor and recreation, know and comply with the requirements of this Instruction.
Require from the management of the organization, the enterprise to assist in the performance of their professional duties and the implementation of rights. 3.3. For payment additional expenses For medical, social and professional rehabilitation in cases of health damage due to an accident at the production and receipt of the professional disease. 3.4.

Attention

Get acquainted with draft decisions of the management of the enterprise relating to its activities. 3.5. Request or on behalf of the direct supervisor, documents, materials, tools, etc. necessary to fulfill their job duties.

3.6.

Other rights provided for by labor legislation. 4. Worker's responsibility Tortanist is responsible: 4.1.

During the working day (shift), the driver of the transport and cleaning machine: 1) performs work on the transport and harvest machine attached; 2) produces the cleaning of passenger platforms, the territory of the station, the station in the clock reduction in the intensity of the passenger traffic and the movement of passenger trains; 3) produces lifting and movement of cargo by trailed units, mechanisms and adaptations; 4) contains in good condition and clean the transport and cleaning machine, tools, devices, as well as means of personal protection; 5) by order of the direct supervisor performs work, complying with the complexity of their execution of working lower qualifications; -. (other duties) 2.4.

Official instruction of the driver for cleaning streets

When working with loader, brush equipment must be turned off and located in the transport position. 3.30. When using a loader with a bucket, it is necessary to install the bucket horizontally on the support surface and when the tractor moves forward to fill the bucket.

After filling the bucket, you need to turn the bucket up, raise an arrow to the height, which provides a bucket passage over a side of the vehicle, taking into account the rotation when unloading, drive up and unload the bucket. 4. Requirements for labor protection in emergency situations 4.1. Work should be immediately stopped in cases: - the emergence of a fire; - damage to the harvesting machine; - sudden disconnection of electricity; - with an accident with an employee.4.2.
Its responsibilities include inspection and refueling machine with combustible and oil, lubrication of parts susceptible to friction. It is obliged to observe the processes of loading, fastening and unloading goods transported by the company. He carries out all the current repair work With the equipment attached to the tractor, and sometimes involved in the repair of other devices. Duties of tractor drivers of other discharges Job description A tractor driver of agriculture implies that, depending on the discharge received by the employee, it can control the machines with different power. Thus, the fourth discharge experts are allowed to equipment, which are capable of developing power up to 73.5 kilowatts. The fifth discharge master can control the tractor, the engine power of which up to 147 kilowatt. The tractor driver of the sixth discharge has the right to control the equipment with the engine, the power of which up to 279 kilowatt.
Perform only the work that is entrusted with a direct supervisor and, provided that are known safe methods Her execution.3.2. When moving through the territory, production and auxiliary premises, when performing their job responsibilities, follow the rules of movement established by the relevant signs and signs.3.3. When appears in the territory of transport, it is necessary to be attentive to the signals by the drivers of moving transport and perform them, not to be on the way of moving transport and depart at a safe distance. 3.4. It is forbidden to be in the production zone of loading and unloading works.3.5. The employee is obliged to use the established passages and transitions. It is forbidden to concern those in the movement of parts of the mechanisms, electrical wires, cables, step onto the aircraft lying on the floor.

PFS-0.75 BKA) Added 01.02.2016 Labor protection training for managers and specialists This labor protection instruction is designed specifically for safe operation of the harvesting machine (Snow loader of the PFS-0.75 BKA). 1. GENERAL REQUIREMENTS OF LABOR PROTECTION 1.1. This instruction is designed in accordance with P.

5 Resolutions of the Ministry of Labor of Russia "On Approval of Methodical Recommendations for the Development of State Regulatory Requirements for Labor Protection" No. 80 dated December 17, 2002, section X "Labor Protection" of the Labor Code of the Russian Federation No. 197-FZ of December 30, 2001, "PFS-0.75 Snow Brupping Passport B and PFS-0.75Bka, "TII P-32-TSL-527-97" Typical Instructions for Labor Protection for the driver's driver "operating in the territory of the Russian Federation, as well as the Internal Labor Regulations approved by the Director General.

This Labor Protection Instructions are designed specifically for safe operation of the harvesting machine (PFS-0.75 Snow-loader BKA).

1. GENERAL REQUIREMENTS OF LABOR PROTECTION

1.1. This instruction was developed in accordance with paragraph 5 of the Resolution of the Ministry of Labor of Russia "On approval of methodological recommendations for the development of state regulatory requirements for labor protection" No. 80 dated December 17, 2002, section X "Labor Protection" of the Labor Code of the Russian Federation No. 197-FZ of 30.12. 2001, "PPS-0.75B and PFS-0.75BKU snow supply passport, TII R-32-TSL-527-97" Typical labor protection instructions for the driver's car driver "operating in the territory of the Russian Federation, as well as the rules of internal labor Rules approved by the Director General.
1.2. Facials are allowed to operate no 18 years old, which have no contraindications to this work for health, which have passed the introductory and primary labor protection instructions, fire-fighting instructions, as well as trained in safe methods and techniques in the workplace and verification of knowledge of labor protection claims.
1.3. The staff must undergo a re-briefing on labor protection at least 1 time in 6 months, a periodic medical examination - in accordance with the order of the Ministry of Health and Social Development No. 302n, the next test of knowledge is at least 1 time in 12 months.
1.4. The employee is obliged to comply with the rules operating in the organization, the work schedule, labor and recreation, know and comply with the requirements of this Instruction.
1.5. The following dangerous and harmful production factors may affect the employee during work:
- physical overload;
- increased or reduced air temperature of the working area;
- increased air mobility;
- overvoltage of visual analyzers;
- Moving vehicles.
- defective tool and fixtures;
- increased voltage value in the electrical circuit, the closure of which can occur through the human body;
- sharp edges, burrs and roughness on the surfaces of tools and equipment.
1.6. In accordance with the current standards for the issuance of special clothing, shoes and other personal protective equipment (PPE), personnel must be provided with special clothing and footwear, as well as PP.
1.7. Places specifically allocated and equipped for smoking tobacco are designated by signs "Smoking Space".
1.8. At the end of work, during breaks (including for lunch), after visiting the toilet, you need to wash your hands with soap.
1.9. Feed food in a specially equipped location.
1.10. The employee is obliged to comply with fire safety requirements in accordance with the instructions on fire safety measures in the territory, buildings and structures approved at the enterprise.
1.11. The employee is obliged to be able to provide the first assistance to the victims in accordance with the instructions for first aid to the victim acting in the organization.
1.12. Immediately inform your direct supervisor about every accident that occurred in the production, signs of a professional disease, about a sudden deterioration of well-being, about all situations that create a threat to the life and health of people, and may also entail a violation of the state of normal working conditions.
1.13. The employee is responsible for violating labor protection requirements in accordance with the current legislation of the Russian Federation.

2. Requirements for labor protection before work

2.1. Make sure in the health of workwear and other SIZ, wear them. In the pockets are forbidden to keep sharp, stitching items. The sleeves should be fastened, there must be no hanging ends on clothes. It is forbidden to start work in a painful or tired condition. It is forbidden to work in shoes with open heel and sock.
2.2. Get a changeable task.
2.3. Carefully explore the passport on the operated cleaning machine.
2.4. Before starting work, make sure that the cleaning machine is operated:
- availability of certificate for the right to control the vehicle;
- technical operation of the machine guaranteeing the safety of work;
- serviceability of brakes, clutches of clutch, speed switching box;
- reliability of fastening of levers and steering, as well as the backlash reduction;
- the state of tires and pressure in them;
- the serviceability of lighting devices, stop signals, turning pointers, sound (transmitting) signal;
- no leakage of fuel, oil, water, antifreeze;
- the presence of the tool, accessories and portable alarms of an emergency stop;
- refueling the car with fuel, oil, water, antifreeze and brake fluid;
- electrolyte level in batteries;
- availability and serviceability of blocking and other devices;
- Check the reliability of fastening and connecting trailed and hinged units, mechanisms and fixtures.
2.5. The employee should not start working if a malfunction was detected, in which the rules of the road traffic is prohibited, or at least one of the following defects takes place:
- are not adjusted or faulty brakes;
- defective brake signal;
- overheating of the engine or sparking of the electric motor;
- lowering tire pressure, cross-cutting holes, cord damage;
- damage to electrical storage;
- flow in oil pipelines, benz pipelines, batteries;
- Faulty lighting and other faults specified in the instruction manual for the machine.
2.6. Before starting the engine, make sure that the PPC lever is in a neutral position.
2.7. All the disadvantages and faults discovered immediately inform the direct supervisor.

3. Requirements for labor protection during work

3.1. Perform only the work that is entrusted with the direct supervisor and, provided that safe methods are known.
3.2. When moving through the territory, production and auxiliary premises, when performing their job responsibilities, comply with the rules of movement established by the relevant signs and pointers.
3.3. When visiting the transport, it is necessary to be attentive to the signals with the drivers of moving transport and perform them, not to be on the way of moving transport and move themselves at a safe distance.
3.4. It is forbidden to be in the production zone of loading and unloading.
3.5. The employee is obliged to use the established passages and transitions.
3.6. It is forbidden to concern those in the motion of parts of the mechanisms, electrical wires, cables, step onto the floor-lying electrical pipes.
3.7. It is forbidden to wrap the electric lamps with paper or matter, use the electric pipe to hang the documentation, visual agitation, clothing and other items.
3.8. When finding in the territory and in the production facilities, the organization is prohibited:
- stand behind cars;
- to pass in narrow places between moving transport and wall or cargo;
- to be in the zone of loading and unloading work;
- to enter without permission for fences;
- touch the open and not fenced with current parts of the equipment, the fittings of general lighting, contacts (knives) of the electrosubilateral, as well as to bare and poorly insulated electrical pipelines, open the doors of electrical cabinets;
- approach the distance less than 10 m to the detected dangling wire;
- approach the open pit and trench;
- walk near opening doors and windows;
- use for the seating of random items (drawers, pallets, barrels);
- allow for workplace persons who are not related to the work performed;
- transfer power tools to unauthorized persons, leave it unattended;
- touch the subjects and enter the premises, on the shields and the doors of which warning signs with inscriptions are installed: "Passage is prohibited", "high voltage", "dangerous for life", "Do not include - people work."
3.9. When working with a tool and devices during the work shift, follow the safety requirements set forth in "Labor protection instructions when working with tools and adaptations" approved by the Director General.
3.10. During control, the employee must:
- maintain the speed of the vehicle in accordance with the requirements of road traffic rules, road signs and taking into account meteorological conditions (on the territory of LLC "LLC" not more than 10 km / h);
- observe the testimony of control devices;
- Periodically check and take measures to remove stones and other items stuck between the wheels of the wheels.
3.11. Submit a warning beep when people move on the way of movement of the harvesting machine. Warning sound The driver must also serve when moving the machine from the place and when the direction of movement changes.
3.12. The employee is prohibited:
- leave without surveillance the car, as well as transfer the management of unauthorized persons;
- control the machine in a painful, tired condition, as well as in a state of alcoholic or narcotic intoxication;
- produce cleaning the territory in the dark during insufficient illumination;
- start working without first aid kit and fire extinguisher;
- deviate from the task of the direct supervisor and use the machine for personal purposes;
- to be found in the cockpit and the body of persons who are not related to the work performed;
- to transport people on the steps;
- rest or sleep in the cockpit and body during the parking lot when the engine running;
- leave the car under raised or moved cargo;
- to come and run on electrical wires and cables;
- Touch to the torn wire and other easily accessible to the current parts.
3.13. The height of the shaft of the snow is not to exceed 0.5 m in order to avoid the operation of the machine and the danger of its scaling to the side.
3.14. During the operation of the machine, the driver must ensure that during cleaning snow in the working area there were no unauthorized persons.
3.15. When turning or changing the position of the working bodies, the driver is obliged to make sure of the complete safety of these operations for passersby. It is necessary to show special care when working in ice, fog or poor visibility.
3.16. The driver is prohibited to extract any items from under the trailed and attachments of the machine with the engine running.
3.17. In the interruptions at work and at the end of the task of the head, trailed and attachments, mechanisms and fixtures should be omitted down. It is prohibited under raised trailed and attachments under raised trailers and attachments.
3.18. Putting the machine only when the engine is turned off.
3.19. All operations related to maintenance and repair must be performed after a complete stopping of the machine, its slowing down, the installation of the gear shift lever to the neutral position, engine stop and when the working bodies are lowered or installed on the fixators (special racks). Under the wheels should be substituted at least two stops from the opposite sides of the wheel.
3.20. When the engine running, only checking the operation of the brakes and engine systems is allowed.
3.21. The wiping material and the rag must be stored in a metal box.
3.22. For inspection of nodes of the repaired machine, it is prohibited for it when the engine is running.
3.23. When performing work, the signal lighthouse must be enabled.
3.24. It is forbidden, when entering the cabin, use steering wheels and levers as supports.
3.25. It is forbidden during the operation of the brush equipment to be unauthorized persons in the zone of 5 m radius.
3.26. During transport movements, the rear and front attachments must be installed in the transport position.
3.27. To avoid overturning or breakdowns of the tractor and attachments forbidden:
- produce loading and unloading operations on sites having a bias of more than 5 °;
- When working with the maximum raised arrow of the loader, produce sharp braking, steep reversals or sharp turning on the clutch clutch.
- move at a speed of more than 5 km / h along roads having a steep bias, big irregularities or cool turns;
- lift the load of the loader bucket - more than 900 kg.
3.28. In the event of a stop of the engine to lower the work equipment, it is necessary to translate the control lever of the front attachment to the floating position.
3.29. When working with loader, brush equipment must be turned off and located in the transport position.
3.30. When using a loader with a bucket, it is necessary to install the bucket horizontally on the support surface and when the tractor moves forward to fill the bucket. After filling the bucket, you need to turn the bucket up, raise an arrow to the height, which provides a bucket passage over a side of the vehicle, taking into account the rotation when unloading, drive up and unload the bucket.

4. Requirements for labor protection in emergency situations

4.1. Work should be immediately stopped in cases:
- the emergence of a fire;
- damage to the harvesting machine;
- sudden disconnection of electricity;
- In case of an accident with an employee.
4.2. If an emergency occurs to suspend work, turn off the equipment from the electrical network, exit the danger zone, if necessary, to bring people nearby, and inform the direct supervisor. It is forbidden to start repairing equipment.
4.3. To provide the first assistance to victims in accordance with the instructions for first aid to be affected by the accident, approved by the Director General, if necessary, to call an ambulance aid by phone 103 or send the victim to the medical institution, putting a previously informed leadership.
4.4. To further investigate the reasons for which an accident occurred or an accident, it is possible to maintain the situation if it does not create a threat to the life and health of people and the safety of material property.
4.5. When signs of fire or fire are found to operate according to the instructions on fire safety measures in the territory, in buildings and structures approved in the organization.
4.6. With a sudden disconnection of electricity to immediately stop work. Notify the direct supervisor.
4.7. If deficiencies are found in the cleaning machine, drown out the engine. Report immediately to the immediate supervisor.

5. Requirements for labor protection at the end of work

5.1. Move the engine.
5.2. Install the gearbox in a neutral position. Stop cleaning machine parking brake.
5.3. Remove overalls and other PPEs, inspect, put in order and remove to the designated place.
5.4. Thoroughly wash your face and hands with warm water with soap.
5.5. On all identified shortcomings in the work inform the direct supervisor.

We thank Lyudmila Litke for the instructions provided! \u003d)

0.1. The document comes into force from the date of approval.

0.2. Document Developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. The document is agreed: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is made with an interval not exceeding 3 years.

1. General Provisions

1.1. Position "The driver of the 3rd-th discharge machine" refers to the category "Workers".

1.2. Qualification requirements - full or basic general secondary education. Vocational education or training directly in production. Without demands to face work.

1.3. Knows and applies in activities:
- structure, work and maintenance of transport machinery;
- types of fuel and oil;
- appointment, timing and ways to charge batteries;
- Traffic Laws;
- Motion safety rules.

1.4. The driver of the 3rd category of the 3rd category is appointed and dismissed by the order for the organization (enterprise / institution).

1.5. The driver of the 3rd discharge transport machine is subordinate directly to _ _ _ _ _ _ _ _ _ _.

1.6. The driver of the 3rd discharge transport machine manages the work _ _ _ _ _ _ _ _ _ _.

1.7. The driver of the 3rd discharge transport machine during the absence is replaced by the face appointed in the prescribed manner, which acquires relevant rights and is responsible for the proper fulfillment of the duties assigned to it.

2. Characteristics of works, tasks and job responsibilities

2.1. Manages the transport and cleaning machines of various systems and lifting capacity, intended for cleaning and transporting garbage from stationary and stationary areas, perrons and passenger platforms, streets, etc.

2.2. Watches loading, unloading and cleaning.

2.3. Performs maintenance and maintenance in good condition of the transport machine.

2.4. He knows, understands and applies existing regulatory documents relating to its activities.

2.5. Knows and fulfills the requirements of normative acts on labor protection and ambient, complies with norms, methods and techniques for safe work.

3. Rights

3.1. The driver of the 3rd discharge transport machine has the right to take actions to prevent and eliminate cases of any violations or inconsistencies.

3.2. The driver of the 3rd category transport machine has the right to receive all social guarantees provided for by law.

3.3. The driver of the 3rd discharge transport machine has the right to demand assistance in fulfilling its duties and the implementation of rights.

3.4. The driver of the 3rd category transport machine has the right to demand the creation of the organizational and technical conditions necessary for the performance of official duties and the provision of the necessary equipment and inventory.

3.5. The driver of the 3rd category transport machine has the right to get acquainted with projects of documents relating to its activities.

3.6. The driver's transport and harvesting machine driver has the right to request and receive documents, materials and information necessary to fulfill their job responsibilities and managing orders.

3.7. The driver of the 3rd discharge transport machine has the right to increase its professional qualifications.

3.8. The driver of the 3rd category transport machine has the right to report all violations and inconsistencies identified in the process and make proposals for their elimination.

3.9. The driver of the 3rd category transport machine has the right to be familiar with the documents defining the rights and obligations of the position, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The driver of the 3rd discharge transport machine is responsible for non-fulfillment or late fulfillment of the obligations assigned to this official instruction and (or) non-use of the rights provided.

4.2. The driver of the 3rd discharge transport machine is responsible for non-compliance with the rules of the internal labor regulation, labor protection, safety, industrial sanitation and fire protection.

4.3. The driver of the 3rd discharge transport machine is responsible for disclosing information about the organization (enterprise / institution) relating to a commercial secret.

4.4. The driver's 3rd discharge driver is responsible for non-fulfillment or improper fulfillment of the requirements of internal regulatory documents of the Organization (enterprise / institution) and legitimate management orders.

4.5. The driver of the 3rd discharge transport machine is responsible for the offenses committed in the process of its activities within the limits established by applicable administrative, criminal and civil law.

4.6. The driver of the 3rd discharge transport machine is responsible for causing material damage to the organization (enterprise / institution) within the limits established by applicable administrative, criminal and civil law.

4.7. The driver of the 3rd discharge transport machine is responsible for the illegal use of the official authority provided, as well as the use of them for personal purposes.

Added to the site:

1. General requirements

1.1. This Labor Protection Instructions (Instructions) for the driver of the Freight Machine (Machine) establishes typical requirements for labor protection for machine drivers (universal-cleaning machines, snow loads, auto and electric goods, electrocars, electrical trains) used for the cleaning of railway stations (stations ), train stations and stopping points of the Open Joint-Stock Company "Russian Railways" (Russian Railways) and developed on the basis of "sectoral rules for labor protection in the passenger economy of the federal railway transport"Pot RO-13153-CL-923-02.

In the structural divisions of OJSC Russian Railways, instructions for labor protection for car drivers, taking into account local conditions and specificity of activity and in accordance with the requirements of this Instruction, should be developed and approved.

1.2. Persons who have reached eighteen years have been allowed to manage the machine, having a certificate of managing the machine, which have passed the training and testing of knowledge on labor protection and electrical safety, mandatory medical examination, introductory and primary instructors in the workplace on labor protection, internship.

The duration of internships from 2 to 14 shift for each driver establishes the head of the division.

During the work, the driver must pass repeated, at least once every three months, and unscheduled labor protection instructions, as well as periodic medical examinations at least once every two years.

Every day, the driver must be medical examinations for checking the health status. The presence in the body of alcohol, narcotic and toxic substances is not allowed.

1.3. Machines are assigned to drivers in writing manager transport unit. No more than four drivers can be enshrined at one machine.

1.4. When leaving the line, the driver must have with him:

a) certificate for the right to control the machine of this category;

b) registration documents for the car;

c) travel or route leaf.

1.5. The driver serving the car with a license plate must have driver's licenseissued by the Office of the Ministry of Internal Affairs of the Ministry of Internal Affairs on the subject of the Russian Federation.

1.6. During work on the driver, the following dangerous and harmful production factors can affect:

a) moving vehicles, mobile railway composition, transported and stored loads;

b) moving parts of the mechanisms, electric pipes and current-carrying parts of the electrical appliances of the machine;

c) elevated noise in the workplace;

d) reduced or elevated air temperature of the working area;

e) an increased dust of air of the working area;

(e) Increased bodies of air of the working area.

1.7. The driver must be familiar with the card certification of his workplace and compensation for him according to the results of the workplace certification.

1.8. The driver must know and follow:

a) the requirements of the Rules of Road Movement of the Russian Federation (traffic rules), road marking, road signs, testimony of traffic lights and other means of regulating and ensuring road safety;

b) relevant sections "Instructions for alarm in the railway transport of the Russian Federation", "Rules technical exploitation railways Russian Federation";

c) Requirements for industrial sanitation, electro- and fire safety during operation, maintenance and repair of cars, trailed and attachments, mechanisms and devices on line and in the garage.

1.9. The driver should know:

a) signs, causes and consequences of faults arising during the operation of the machine, methods for their detection and elimination, as well as the order of storage of the machine in the garage and on open parking;

b) appointment, device, principle of action by the machine attached to it, as well as the trailed and attached aggregates, mechanisms and devices attached to it;

c) Features of driving machines with adverse weather conditions and main techniques for the prevention of road accidents, safety requirements when working with trailed units, mechanisms and adaptations.

1.10. The driver must:

a) fulfill only the work entrusted by the head;

c) carry out the requirements of prohibiting, warning, indicative and prescriptive signs, inscriptions and signals submitted by driver locomotives, cranes, vehicle drivers and other railway transport workers;

d) passing around the station, the station on established routes, pedestrian walkways, aisles and transitions;

e) entering the railway track from the premises, as well as because of buildings that make it difficult to see the path to pre-convince the absence of moving composition moving along it, and at night, wait until the eyes get used to the darkness;

e) pass along the railway routes of the station on a wide interparture (the distance between the trapes axes at least 6 m) or on the side of the earth canvas is not closer to 2.5 m from the extreme rail, while closely monitor the movements of rolling stock on adjacent paths, looking under the feet , since in the specified places of the passage there may be limit and pissing columns and other obstacles;

g) move the path only at right angles, after having previously convinced that in this place there is no moving composition moving at a dangerous distance;

h) bypassing groups of cars or locomotives on the way, at a distance of at least 5 m from the autospark;

and) pass between seven cars, if the distance between the autospots of these cars is at least 10 m;

k) in obtaining injury or illness to stop working, inform about this of its direct supervisor and seek help in a medical unit or other medical institution;

l) be able to provide first assistance to victims;

m) comply with the rules of the internal labor regulation and the established mode of work and recreation;

n) when a breakdown or malfunction of the machine stop work, take the machine to a safe place and report this to the person responsible for technical condition vehicles, its direct supervisor, work distributor and further comply with their instructions;

o) enjoy when working with oils, fuel and other petroleum products with appropriate PPE, protective creams, ointments and pastes in accordance with the instructions for their use;

n) turn off the engine of the car in the parking lots and when refueling fuel;

p) when the sharp smell of gasoline or burning wiring while moving, stop the machine, determine the reason for its appearance and eliminate the malfunction;

c) be attentive at the time of work, not to be distracted by foreign affairs and conversations and not distract other workers;

t) when working outdoors in winter to prevent overcooling and frostbite to use for heating breaks in operation according to graphics approved by the head of the unit;

y) take food in dining rooms, buffets or specially designated rooms with appropriate equipment, before eating thoroughly wash your hands with warm water with soap;

f) report mechanics to the duty officer responsible for the technical condition of the machines, about all machine faults.

1.11. The driver must fulfill fire safety requirements:

a) be able to use fire extinguishing tools;

b) smoke only in allocated and fitted places;

c) not to use open fire when checking the engine power system and while working in the cockpit;

d) not to produce work related to the use of open fire, electrode ward, soldering lamps, torches;

e) do not burn the container and do not breed fires near the car;

e) explosive substances, flammable and combustible fluids in the cockpit or body;

g) about all faults of electrical appliances and electrical equipment to immediately communicate the duty mechanics.

1.12. The driver is prohibited:

a) on railway crossings to move on prohibitive signals of traffic lights, and in their absence before moving rolling stock;

b) move through the railway path in unidentified places;

c) be located on the territory of the station, the station in places marked with "Caution! Oversized place", as well as near these places in passing a rolling stock;

d) cross or run the path to moving rolling stock, locomotive, motion, drowsina and other vehicles;

e) become or sitting on the rail;

e) sit on the steps of cars and locomotives, as well as go and jump off from them while driving;

g) to move the arrows equipped with electrical centralization, in the locations of the express and transverse fasteners of the arrow transfers, to become between a sharp and frame rail, in the gutter on the arrow translated and on the ends of the sleeper;

h) control the machine in a painful condition, when overwork, alcoholic and narcotic intoxication or residual phenomena of intoxication;

and) transfer control to the machine to other persons not specified in the task outfit (track sheet);

k) relax and sleep in the cab cabin with the engine running;

l) eliminate the fault of the machine under the raised body, if there are no resistant devices under the body;

m) concerned the moving parts of the mechanisms, as well as electrically conductives and current parts of the electrical appliances of the machine;

h) leave the car without observation, if it is on a passenger platform or near the railway tracks, as well as with a working engine and not locked on the door;

o) produce cleaning the territory in the dark with insufficient illumination;

n) leave the line without a first-aid kit, fire extinguisher and emergency stop sign;

p) apply kerosene or other toxic petroleum products for cleaning skin and PPE;

c) deviate from the route specified in the task outfit (track sheet), and use the machine for personal purposes.

1.13. The driver, discovered wire cliffs or other elements of the contact network hanging from them outsiders, should:

a) immediately report this to the head, train dispatcher or to the nearest district item of the contact network;

b) to protect the dangerous place before the arrival of the repair brigade by any heavenly means;

c) ensure that no one approaches the torn wire for a distance less than 8 m;

d) in case of hitting the "step-in voltages" zone, observing the following security measures:

1) Cannot tear out the soles from the ground surface and make wide steps;

2) Move only with the "goose step" - the heel of the walking legs, without breaking down from the Earth, is attached to the sock of another leg.

1.14. The driver must be ensured by workwear, footwear and other SIZ according to the order of the Ministry of Health and Social Development of Russia N 582N \u200b\u200bof 10/22/2008 "On approval of the standard standards of free issuance of certified special clothing, special shoes and other means of individual protection of railway transport workers of the Russian Federation."

1.15. Personal clothes and workwear must be stored in the enterprise separately in dressing room locker rooms.

1.16. The driver must monitor the health of the workwear, to take it in a timely manner in washing, dry cleaning and repair, and also contain dressing lockers in cleanliness and order.

1.17. The driver that does not fulfill the requirements of this Instruction is responsible in accordance with the legislation of the Russian Federation.

2. Requirements for labor protection before work

2.1. Before starting work, the driver must wear well-made workwear and shoes issued to him, bring them in order.

2.2. Upon receipt of a travel or route sheet (dreamed of tasks), the driver must check the correctness of its design and the presence of the necessary records, signatures and marks in it, to complete the target briefing, familiarize yourself with the working conditions, with the family of retractable or transported cargo, with weather conditions (ice, Bad visibility due to fog, rain, snow).

2.3. Before leaving the line, the driver must check the technical condition of the machine:

a) the health of the brakes, steering, lighting, stop signal, turning pointers, sound signal, wiper;

b) the condition of tires and air pressure in them, in the winter and summer period, apply the corresponding wheels with winter and summer tires;

c) the presence and availability of the tool, accessories, towing cable and portable alarms of emergency stop, as well as signal warning signs (flashlight orange or yellow color, red checkbox or shield) installed on the machine when working on the platform;

d) condition and operation of batteries;

e) the presence and availability of the action of blocking and other devices;

(e) Reliability of fastening and combining trailed and attached units, mechanisms and devices.

2.4. The driver of the Auto and Electric Loader must check: the serviceability of the forklift, make sure that there are no damage to the chains and the serviceability of their mounting to the frame and the carriage of the forklift, to conduct an external inspection of the welds of the upper brackets, the reliability of the attachment of the fingers and hinges of the levers, the effect of the loader mechanisms.

2.5. The driver must have a car malfunction, which cannot be eliminated on its own, report this to the person responsible for the technical condition of vehicles, and the person responsible for the safe operation of vehicles, and do not start working before their elimination.

3. Requirements for labor protection during work

3.1. General labor protection requirements during work

3.1.1. Cleaning the area of \u200b\u200bthe station, the stations should be produced in the clock reduction in the intensity of the passenger traffic.

Platforms should be cleaned during the break between the movement of trains.

It is not allowed to clean the platforms during the landing and disembarkation of passengers.

3.1.2. During the control, the driver must:

a) maintain the speed of the machine in accordance with pDD requirements, road signs and taking into account meteorological conditions;

b) observe the testimony of control devices;

c) periodically check and take measures to remove stones and other items that came between the tires of the wheels.

3.1.3. The driver must operate the car on the illuminated areas with a solid and smooth coating: asphalt, concrete, paving. When driving, there should be stones, bugans, potholes and other obstacles. If there are significant damage to the road linen, open wells should take measures to protect them or closure, and if it is impossible to do it yourself, immediately inform the person responsible for the safe operation of vehicles.

3.1.4. Travel through railway tracks should be carried out on railway crossings if there are flooring at the level of the rail head in compliance with the following security requirements:

a) on adjustable moves to move on the first gear with stable motor turnover with the resolution of the transcendent traffic light, in the absence of a threat from the side of the railway rolling stock;

b) at the entrance to an unregulated crossing should stop the car at a distance not closer to 5 m from the nearest rail and make sure that the way to move is free and there is no threat from the railway rolling stock, and then travel through railway tracks;

c) is not allowed to stop the car on the railway tracks, as well as closer than 5 m from the nearest rail;

d) in the event of an unforeseen stop of the car on the railway crossing, immediately take measures to evacuation;

e) If it is impossible to evacuate the car from a railway crossing to take measures to notify trains for the created dangerous situation in both directions, being from the railway moving at a distance of at least 1000 m (with the involvement of other people) - the day the signal is served with a circular rotation of the hand with some Well visible subject (flap of bright matter, scarf, hat), and at night with a torch or a lantern of any color.

Cancel hazard alert signals only after evacuating the machine beyond the railway moving to a safe distance.

3.1.5. The driver must, when moving, abide by the distance between vehicles in order to avoid the departure with a sudden stop in front of the riding vehicle. The distance to the riding ahead of the vehicle must be at least 10 m, and on the slopes - at least 20 m.

3.1.6. When managing the driver, the driver must comply with the following speed:

a) on passenger platforms - no higher than 3 km / h;

b) in closed rooms, moving and slopes - not higher than 5 km / h;

c) in the station, the station is not higher than 10 km / h.

3.1.7. The driver must include a flashing light on the car at the beginning of work.

The driver must submit a warning beep at the beginning of the machine and when the direction of movement changes.

It is not allowed to turn the car sharply and cool.

3.1.8. The driver must follow the movement of people when moving the machine on platforms and station, station, railway station and take measures to prevent hitting on them. In cases where there is a danger of an unexpected appearance of people, the driver must serve a beep no closer than 5 meters to a dangerous zone.

3.1.9. When moving the car in the zone increased level Noise It is necessary to feed frequent intermittent sound signals, and if necessary, light signals.

3.1.10. The movement of the machine on platforms should be carried out no closer than 1 m from the edge of the platform.

When performing the reversal of the machine on the platform and when cleaning the platform, it is allowed to bring the machine to the edge of the platform is not closer than 0.5 m.

a) allow to control the machine, repair and launch of the engine of persons who do not have rights to it;

b) carry people on the steps of the car;

c) leave the car under raised or moved cargo, in general use travel, on the ways of movement of other vehicles;

d) run into electrical wires and cables.

3.1.12. When breakdown or detecting malfunctions, the machine threatening the driver or other employees immediately stop the work, to take the car to a safe place and report this to the person responsible for the technical condition of vehicles, its immediate supervisor and distributor of work.

3.1.13. Towing a faulty machine to the parking lot or repair should be performed using standard towing means.

3.2. Occupational safety requirements when working on a universal harvesting machine

3.2.1. It is forbidden to water water and detergent to the platform, which has an electro-moving composition with raised current collectors.

3.2.2. During the movement of the machine to the place of work, mounted aggregates, mechanisms and fixtures should be raised or translated into the transport position, and the upper safety casing of the engine is tightly closed.

3.2.3. The driver must ensure that during cleaning the territory in the area of \u200b\u200bthe machine there are no unauthorized persons.

3.2.4. The driver must make sure the safety of the surrounding people during the turns of the car or changing the position of its working bodies.

Care must be taken when working in poor visibility conditions (fog, snowfall, rain) and when ice.

3.2.5. Under the trailer wheels located in the parking lot, the driver must put the stops from two sides.

3.2.6. It is not allowed to carry workers on trailed and hinged units, mechanisms and devices, steps of machines.

3.2.7. It is not allowed to extract any items from the trailed and attachments of the machine with the engine running.

3.3. Requirements for labor protection when working on the snow load

3.3.1. When the snow turnover is moved through the station and platforms, its arrow and shovel must be translated into the transport position.

3.3.2. In order to avoid overturning the snow loader, on the path of its following, there should be no transverse slope of more than 15 degrees. With steep turns, the speed of movement should be no more than 5 km / h.

3.3.3. Before lifting or lowering the shovel and conveyor, the driver must ensure that there are no people near these nodes or foreign objects.

3.3.4. Before the start of snow loading, the driver of the snow turnover must make sure that there are no people in the area of \u200b\u200bthe upcoming work on the conveyor and between the snow turnover and the vehicle for the loading of snow. Persons engaged in snow cleaning can be at a distance of at least 3 m from the paws of the snow turnover.

3.3.5. When loading snow, the driver must:

a) include the mechanism only when the shovel lowered;

b) Constantly monitor the pressure of the oil in the hydraulic system, the progressive speed of the conveyor and the number of immersed snow.

3.3.6. In order to avoid slipping of the snow loader to the side of the height of the shaft of the snow, it should not exceed 0.5 m.

3.3.7. After stopping a snow loader for cleaning the shovel and conveyor from the mature snow, the mechanisms of the snow-loader should work out to reset the snow from the conveyor. The cleaning of the shovel and the conveyor is carried out by scrapers, shovels and other manual instruments after a complete stop of the mechanisms of the snow loader.

3.4. Requirements for labor protection when working on auto and electric loader

3.4.1. When driving a car and electric loader (loader), its lifting device must be rejected back and raised to height from the level of the roadway not more than 0.5 m.

3.4.2. The entrance to the place of loading-unloading of cargo should be carried out on the first gear. A sharp braking of the loader with ice, wet and slippery road is not allowed, as this can lead to an accident and tipping the loader.

3.4.3. Before lifting-lowering cargo, the auto loader should be put on the hand-made brake, and the electric loader is on the parking brake.

3.4.4. It is forbidden when the loader moves with the load sharply slow down, change the slope of the load-lifting device, omit or lift the cargo.

3.4.5. Moving the loader of large-sized cargo, limiting visibility to the driver, must be made accompanied by a signproof.

3.4.6. When the loader is moved, the location of the wires, arches, pipes and other obstacles located on top and which may be an obstacle to the passage of the loader.

3.4.7. The load after transportation must be laid on the gaskets, providing a free outlet of the forktill from under the load.

3.4.8. Before transporting the cargo, it is necessary to preview the places from where the goods will be taken and where it will be moved.

3.4.9. If necessary, it should be removed from the loader to omit the loading device, remove the key from the electrical lock, put the loader on the brake.

3.4.10. It is forbidden to exceed the speed of the loader at turns, when leaving the corners of buildings, moving through railway tracks, intersection and narrow places. The speed of movement in these cases should be no more than 3 km / h.

3.4.11. When capturing the cargo, the forktime of the loader needs to provide its stable position. To do this, the load on the forking capture to avoid the occurrence of a tipping point should be pressed to its vertical part. With a cargo, the center of severity of which the driver is not possible to determine whether the loader must maneuver with marginal caution, for which it is necessary:

a) set the width of the width, respectively, the width of the cargo;

b) bring the pitchframe so deep as possible;

c) raise forks to height sufficient to move the cargo;

d) Talle the forks back so much as it is necessary to stabilize the load on the willars.

3.4.12. When driving forklift With cargo and without cargo, the loader frame should be installed in a transport position at which the forks should be raised by 200 - 300 mm from the ground, and the frame is rejected back.

3.4.13. Not allowed during the loader operation:

a) work on the loader with a shield shot closing the panel with electrical equipment, lid removed rechargeable drawer;

b) lay the load with a crane directly to the gripping device of the loader;

c) touch uninsulated, damaged wires and electrical distribution devices, running on electrical wires lying on Earth;

d) bring up the moved cargo to a distance less than 2 m from the stress and non-fired wires or parts of the contact network;

e) raise and carry the cargo, the mass of which is not known, lift the clamped and sampled cargo;

e) raise, lower and transport people on the fork grip of the loader;

g) to carry loads in a faulty package, drawers mounted upside down, on lateral or end walls;

h) be or drive under the raised cargo;

and) leave the place of control of the loader when lifted by cargo;

k) produce lifting and moving the load of one forklift for a forklift.

3.5. Requirements for labor protection when working on an electrocare and electrical machine

3.5.1. Electrocars, electrical trains (car) can be operated on platforms and other places in the station, railway station, where the bias does not exceed 15 degrees. When you stop at the slope, the punctures should be inhibited by hand brake. Parking car is not allowed on a slope of more than 8 degrees.

3.5.2. The driver must follow the correct loading and linking of the cargo on the square to ensure stability during its transportation and safety on the way.

3.5.3. The driver must require the installation of safety racks and reliable cargo mounting to avoid shipment of cargo and violating its resistance to the square. It is forbidden to enjoy the car without performing these requirements.

3.5.4. It is allowed to use the electric braking of Kara when the hazard has arisen on people, vehicles and other obstacles.

3.5.5. It is allowed to trailer luggage or container trucks in the amount of no more than ten pieces.

The mass of adhesive and moving luggage or container carts with cargo should not exceed the allowed maximum mass for this type Kara.

3.5.6. Before tracing carts, you should check the reliability of the trailer device, the presence of a constipation that excludes spontaneous discharge.

3.5.7. When working on the square, it is forbidden to tug the carts of an unidentified sample, drainage cargoes and fixtures with wolves, as well as towing the carts with two karas.

3.5.8. Movement of the Cara type EC should be carried out forward by the platform on which the driver is standing. Maneuvering Kara platform forward to a distance of up to 10 meters for loading and unloading.

3.5.9. If you need to switch the Cara type EC to the opposite direction, the driver must stop it, turn it into a path in the direction of movement, after which give the opposite.

3.5.10. The height of the accommodation of the cargo on the platform of the Cara type EC should not exceed the counter controller. The cargo should not be outside the platform.

3.5.11. Summing up the driver's lifting platform (when working per cater with a lifting platform) should be made before the stop, avoiding the strikes.

3.5.12. The car movement is not allowed on the platform during the landing and disembarking of passengers from cars.

3.5.13. If the driver needs to be removed from the car, you should disconnect the battery plug from the outlet.

3.6. Requirements for labor protection during maintenance and repair of machines

3.6.1. Maintenance or repair of machines should be made on specially reserved places maintenance and repair equipped with devices, fixtures, equipment, tool, viewing pita, overpass, lifts and other devices.

3.6.2. The machine installed on the maintenance and repair site should be inhibited by the parking brake, the ignition is turned off, the gear shift lever (controller) is put in a neutral position, the stops (shoes) in the amount of at least two are put on the steering wheel, the plate "not Launch - people work. "

3.6.3. When maintaining and repairing the machine, you need to use a good tool and devices issued by the employer.

When working, lying under the car, you should use sun beds, mats or lattice trolleys and put on safety glasses.

When posting part of the machine with non-stationary lifting mechanisms (jacks, hoists), it is first necessary to substitute special stops (shoes), then squeeze the car, substitute a part of a walkometer and lower the car on them.

3.6.4. Not allowed when maintaining and repairing machines:

a) perform any work on the machine posted only on the jack, tali and another load-lifting mechanism without installing stationary stops;

b) use instead of kids for a stand for a posted machine wheels of wheels, bricks and other healthy items;

c) shoot and install springs, springs without preliminary unloading;

d) produce maintenance or repair of the machine with the engine running (with the exception of certain types of work);

e) leave the tool and details on the edge of the observation pit;

e) work with damaged or incorrectly installed stops;

g) use scrap, mounting blade and other items to facilitate the turning of the cardan shaft;

h) use when cleaning the workplace with a stream of compressed air;

and) flushing units and parts by gasoline flammable liquids;

k) Store combustible materials, acids, paints and other flammable liquids in the workplace in quantities exceeding their replaceable need.

3.6.5. Workplace, passes and exits from the premises should not be cluttered with materials, parts and assemblies, equipment, racks.

The used wiping material and the wind should be removed into the metal box with a tightly closed lid and remove from the room at the end of the shift to the installed collection place for disposal.

3.6.6. Spilled fuel, oil should be covered with sawdust, sand, which, after absorbing the liquid, must be assembled into metal boxes installed outside the production room.

3.6.7. When maintaining and repairing the machine, you should use a good lamp with a safety net with a voltage not higher than 42 V, and in the observation pit - not higher than 12 V.

3.6.8. Transportation of the failed machine into the garage should be touched by a tractor. It is forbidden to push the car to another vehicle.

3.6.9. When towing the machine, it is necessary to apply a special towing device that has a tag on testing.

When towing on a flexible coupling, it is necessary to ensure the distance between the towing and towed machine from 4 to 6 m, and on the rigid coupling - not more than 4 m.

3.6.10. In case of inspections, commissioning, adjusting and repair operations, it is prohibited to unauthorized persons to be near the levers and handles of the management of the machine, equipment and touch these levers and handles.

3.6.11. To lift the working bodies of the machine during repair, it is necessary to use good and tested lifting tools (cranes, hoists, jacks).

3.6.12. For disassembling and installing nodes and attachments of the machine, it is necessary to use special devices or puller.

It is forbidden to be under removed or installed machine nodes.

3.6.13. Aggregates, knots and wheels of the machine Weight more than 15 kg must be moved by lifting and transport equipment and means of small mechanization.

3.6.14. Before disassembling the hydraulic system and the lubrication system of the machine, it is necessary to drain the working fluid and oil into special containers.

3.6.15. When carrying manually carrying batteries, you must use stretchers.

3.6.16. It is forbidden to tighten the compounds, couplings on pipelines under pressure (liquid, oil, fuel, air).

3.6.17. Remove the plugging hole of the hot engine coolant radiator in mittens. Top the cooling fluid into the radiator follows the engine stopped.

It is forbidden to top up the coolant into the overheated engine radiator and beaten over the filling hole.

3.6.18. When refueling and purging the engine fuel lines, use the pump and apply a grounding device.

3.6.19. Before starting the engine, make sure that all the mechanisms of the hydraulic control drive mechanisms are set to neutral (disabled) position.

Do not start and operating the engine internal combustion In closed rooms.

3.6.20. It is forbidden when inspecting the nodes of the machine being repaired to be under it with the engine running.

3.6.21. Requirements for tire fittings:

a) before removing the wheel to raise the car by a lift or another lifting mechanism;

b) under the raised car to establish special stands (goats);

c) when lifting only one wheel, under the continuous wheels it is necessary to put special stops (shoes);

d) when removing the wheel, it is necessary to use an aluminum sledgehammer in order to avoid damage of parts of the wheel, tires and chopping small metal parts;

e) work on removing tires from the disk to produce on a specially equipped location using safety devices and a special tool intended for this type of wheel;

e) removing the tires from the wheel disk to produce after resetting air pressure in the tire chamber;

g) before mounting the camera, tires and wheels need to be cleaned of dirt and rinse them using a PP driver;

h) when examining the inner surface of the tire between the board with the inside and the cuticle rim it is necessary to put spacers;

and) foreign objects (nails, glass, slices of wire) detected in the inner surface of the tire (nails, glass, pieces) must be removed by a special tool and fixtures.

It is forbidden to produce a feeling of the inner surface of the tire with hands without using PPE;

k) pumping tires by air must be made from a pneumatic station of a stationary compressor or a compressed air cylinder with a gearbox, on a specially equipped workplace with a fencing (curtain) or a reflective device (fork);

l) before pumping the tire with air it is necessary to check the fastening of the hose on the valve of the pneumatic chamber;

m) It is necessary to inspect the locking ring, which must fully lie in the lock dial of the disk;

n) when pumping the tire is necessary:

1) use the elongated 2-meter hose with a pressure gauge and stand aside from the tire;

2) monitor air pressure in the manometer wheel - the pumping of the tire is produced to the pressure set by the rules of operation of this type of tire;

o) install the cap on the valve after pumping the tire;

p) Check the air pressure in the tire, only after its cooling to ambient temperature.

It is forbidden to knock on the tire, disks, a locking ring.

It is allowed to correct the position of the tire on the disk by the tapping only after the cessation of air supply.

It is allowed to pump the tire without removing the wheel from the machine and its disassembly, if the air pressure in the bus decreased by no more than 40% of the normal, and there is confidence that the pressure reduction did not violate the correctness of the wheel parts assembly.

3.6.23. When a malfunction of the valve valve, the wheel chamber, a compressed air, gearbox, tools, tools, or fixtures must be stopped and take measures to troubleshoot.

3.6.24. Tires assembled before and after repair must be installed in a vertical position in a specially reserved place.

3.6.25. Machine washing on a specially designated platform equipped with water and compressed air, a container for detergent liquid, scrapers, brushes and other devices.

3.6.26. Checking the brakes of the machine on the go should be carried out on a site sufficient in size, without obstacles to eliminate a possible hitting on them in the event of a brake malfunction.

4. Requirements for labor protection in emergency situations

4.1. Driver's actions in case of accidents and emergencies

4.1.1. Accidents and emergency situations when working by car:

a) a collision with another vehicle;

b) hitting people;

c) tipping the car;

d) Congress of the car with a high platform;

e) fire combustion;

e) brake failure;

g) steering failure;

h) puncture wheels;

i) refusal of the wiper (janitor);

k) breakdown trailed and attached units, mechanisms.

4.1.2. The driver in the event of an emergency should stop working, stop the car, drown out the engine, brake the wheels and inform his direct supervisor;

4.1.3. The driver in the event of a fire, the car must immediately inform the fire fighting personally or through the people who are nearby, evacuate people from the car and begin steaming the fire using primary fire extinguishing agents.

4.1.4. The driver when carving the car should apply carbon dioxide and powder fire extinguishers.

It is not allowed when using carbon dioxide or powder fire extinguishers to direct carbon dioxide or powder towards people.

If carbon dioxide gets into unprotected parts of the body erase it with a handkerchief or other material and washed with an aqueous solution of soda.

It is not allowed when heating with carbon dioxide fire extinguishers to be taken in an unprotected hand behind the socket and bring the fool closer 2 m to non-erected electrical installations of the machine and flame.

It is not allowed when heating with powder fire extinguishers to bring a spray gun closer to 1 m to the flame.

It is not allowed to pull the last-minute facilities that are less than 2 m from the contact network, without the report of the responsible person of the energy service that the voltage from the contact network is removed and it is grounded.

It is allowed to extinguish the burning objects located at a distance of more than 7 m from the contact wire, without removing the voltage. When extinguishing, it is necessary to ensure that the jet of the fire extinguisher does not touch the contact network under voltage.

4.1.5. To extinguish the foam fuel, the driver should apply foam fire extinguishers or fall asleep fire or sand, cover with a flame to a tarpaulter or a cat.

It is forbidden when felting fuel to grieve with water.

When steaming the flame sand, the Earth should not be raised a scoop or a shovel to the level of the eyes to avoid sand, earth in the eyes.

When covering the flame with a kosma, it is necessary to ensure that the fire from under it does not hit the steady person.

4.1.6. It is forbidden to detect foreign suspicious items in the car or next to it carry out any actions with them. It is necessary to isolate access to them and immediately report this to employees of law enforcement agencies.

4.2. Actions of the driver for the provision of first medical care victims in injuries

4.2.1. Electrical injuries

With electric shock damage, it is necessary to quickly release the affected electric current (knock down electric wire With the victim by the dielectric subject or turn off the electrical installation with a switch, a switch, a different disconnecting machine or remove the fuse, a plug connector, or refurb the wire). When performing the above actions, assisting should not touch the victim without appropriate precautions. It must ensure that it does not be energized at contact with the current-carrying part or in the zone of shingle of the ground closure.

Under the lesion of the current of high voltage or zipper to the victim, in the absence of breathing, it is necessary to immediately apply artificial respiration with alternating a heart massage. Artificial respiration and heart massage is done until the natural breath of the victim or before the doctor arrives.

After the victim comes into consciousness, it is necessary to impose a sterile bandage to the place of electric burn, and regardless of his well-being and lack of complaints, send it to a medical institution. In this case, take measures to prevent the affected by the affected possible mechanical damage (bruises, fractures).

4.2.2. Mechanical injury

Upon receipt of mechanical injury, the victim must stop the bleeding.

With venous bleeding, blood is dark, flows over a solid jet. The stop method is a gulling bandage in the area of \u200b\u200binjury, giving the injured part of the body of an elevated position.

In case of arterial bleeding, the blood is allay, follows the rapidly pulsating or fountaining jet. The method of stopping bleeding is the imposition of a harness (twist) or fixation of the limb after its flexion in the joint.

The harness on the limbs impose above the location of the injury, pulling it around the limbs raised upward, previously wrapped with any soft cloth, and bind to the node on the outside of the limb. After that, the first round of the harness must be painted with fingers and make sure that there is no pulse. The following cookers of the harness are superimposed with less effort.

When you apply a harness (spin) to it, it is necessary to put a note with an indication of its overlay. The harness can be on the victim not more than one hour.

When fractures, dislocations must be imposed on a damaged part of the body of the tire (standard or made of undergraduate means) and a bandage to fix it so as to ensure that there is a damaged area of \u200b\u200bthe body.

When open fractures, it is necessary to transfer the wound before overlaying the tire. The tire is placed so that it does not lay over the wound and did not press on the protruding bone.

When tensile, the ligaments must be imposed on the place of stretching the gouring bandage and cold compress.

It is not allowed to take any attempts to refuel the injured limb.

With all the types of mechanical injuries, the victim must be delivered to the medical institution.

4.2.3. Thermal burns

With first grade burns, only redness and small skin swelling are observed. With the second degree burns, bubbles filled with liquid are formed. With severe burns, charring (necrosis) of tissues occurs.

With all the types of burns, it is necessary to impose a sterile bandage on the burned place and send the victim to the medical institution.

It is forbidden to lubricate the burned place with fat or ointments, open bubbles, tear the burnt parts of clothing. The victim needs to give an anesthetic, abundant drink, warm it up.

4.2.4. Burns with acids and alkalis

In case of burns with acids, the burned part of the body should be labeled with alkalis added to it: soda, chalk, dental powder, magnesia. In the absence of alkalis, you can abundantly water the burned body area with clean water.

In case of burns, caustic alkali should be laundered by water, acidified by boric acid (vinegar or citric acid) or pure water.

4.2.5. Poisoning

In the poisoning of gases (carbon monoxide) of the victim, it is necessary to move from the room on fresh air or ensure the influx of fresh air into the room.

When stopping the breath and cardiac activity, proceed to the conduct of artificial respiration and the massage of the heart, and then send the victim to the medical institution.

4.2.6. Eye injuries

When the eyes are wounded with sharp, cutting or crossing objects, as well as damage to the eye with strong injury injuries, it is necessary to send to the medical institution.

Rinse the eyes of a weak jet of running water when dust or powdered substances get into them.

With chemical burns, it is necessary to open the eyelids and rush to rinse the eyes of a weak jet of running water (within 10 - 15 minutes), after which the victim is sent to the medical institution.

When eye burns with hot water, ferry washing the eye is not recommended. Eyes are closed with a sterile bandage and the victim guide to the medical institution.

4.2.7. Frostbite

With light frostbite, it is necessary to confuse the frostate place with a clean cloth or a mittens. Fruent place can not be frowning with snow. When the skin flies and sensitivity will appear, impose a sterile bandage.

If bubbles appeared during frostbite, it is necessary to take the frnate place to dry sterile material. You can not open and calculate bubbles.

With a general freezing, it is necessary to move the victim to the warm room, to strip and be lost with clean dry clips or mittens until the skin blooms, and the muscles will become soft. If the victim does not breathe, you need to immediately apply artificial respiration and at the same time a heart massage. Artificial respiration and heart massage is done until the victim does not restore the victim or before the arrival of the doctor. When the victim comes into consciousness, it should be warmly covered and drinking warm tea or coffee. After that, the victim should be sent to the medical institution.

5. Requirements for labor protection at the end of work

5.1. The driver must at return from the line to inspect the car, clean it from dust and dirt.

5.2. Radiator's tube on a hot engine must be opened in a mitten or covering it with a cloth (rag) to avoid burns, not allowing the intensive exit of the steam towards the driver.

It is allowed to top up the coolant into the radiator when the engine is stopped or working on small revolutions.

5.3. At the end of the maintenance or repair of the machine, the driver must put in order workplace, tool and fixtures. If the machine remains on goats, check the reliability of their installation.

5.4. The driver must pass the keys from the ignition lock or from the electrical lock in the prescribed manner.

5.5. The driver must take off the workwear and other PPEs and remove them into the dressing room of the locker room.

The driver must pass polluted and defective overalls in washing, dry cleaning or repair.

5.6. The driver must with the contamination of body parts or wetting of clothing by oil products take a warm shower with soap.

To maintain the skin in good condition, it is necessary to use flushing and (or) neutralizing agents according to the order of the Ministry of Health and Social Development of Russia of December 17, 2010 N 1122n.

5.7. The driver must report on the faults and breakdowns of the machine to the face responsible for the technical condition of vehicles, and if necessary, by specifying it to send the car to repair.

His knowledge should include all the rules and rules. technological process His responsibilities, as the operation of the aggregates, they need care for normal operation and what additional tools are required for this. Other knowledge The job description of the tractor driver implies that the employee should know which methods exist to identify and eliminate problems arising during the operation of the equipment. He also should know what quality should be the work performed by him. All instructions that relate to the security of its workplace, as well as what actions he should take to prevent emergency situations while performing their duties, must be implemented. All requirements for operation protective equipment, - also.

Official instruction of a tractor for cleaning streets

2. Qualifications Requirements:

Must know:
device and rules for servicing transport and cleaning machines
fuel and lubrication
appointment, timing and methods for charging batteries
rules of traffic, movement in the territory of the enterprise, transmission paths
installed alarm.

3. Official duties:

Management of transport and cleaning machines of various systems and lifting capacity during the transportation of a cargoer from the station and stationary areas, perrons and passenger platforms, streets, etc.
Observation of loading and unloading.
Maintenance and maintenance in good condition of the transport machinery.

page 1 Official instructions Driver of the transport and cleaning machine. 2 Job Instructions Driver Freight Machine 4.

Property Designer Tractorley

What is guided by carrying out direct activityThe employee adopted to the post of tractor driver is obliged to be guided by legal acts, technical standards and other materials that include a list of works assigned to this worker. It should also carry out instructions and other tasks not only of its direct leader, but also other officials, including tasks from the chief engineer of the organization, where the tractor driver is employed. In addition, he must adhere to the instructions for labor protection, work schedule and a tractor driver.
What should know the knowledge of tractor drivers from the third to the eighth bit should include information about which specifications It has a vehicle entrusted to him and how it is arranged.

Error 404 page does not exist

The driver of the transport and cleaning machine is involved in disciplinary responsibility in accordance with Article 192 of the Labor Code of the Russian Federation for improper performance by its fault, the responsibilities listed in this Instruction. 4.2. The driver of the transport and cleaning machine carries material responsibility for ensuring the safety of entrusted to him inventory values. 4.3. The driver of the transport and cleaning machine for committing offenses in the process of its activities, depending on their nature and the consequences, is involved in civil law, administrative and criminal liability in the manner prescribed by law.
4.4. . 5.

Transport and Cleaning Machine Driver Instructions

The height of the shaft of the snow should not exceed 0.5 m in order to avoid the operation of the machine and the danger of its scaling aside. During the operation of the machine, the driver must ensure that there are no unauthorized persons when cleaning snow in the working area. When turning or changing the position of the working bodies, the driver is obliged to make sure of the complete safety of these operations for passersby.

Attention

It is necessary to show special caution when working in ice, fog or poor visibility. The driver is prohibited to remove any items from the trailed and attachments of the machine with the engine running. 3.17. In the interruptions at work and at the end of the task of the head, trailed and attachments, mechanisms and fixtures should be omitted down.

It is prohibited to be located under raised trailed and attachments, mechanisms and adaptations. 3.18.

Tractor driver-driver: duties and rights

Info

Official duties of the employee at the tractor driver assigned the following job responsibilities: 2.1. Tractor control with an engine capacity up to 25.7 kW (up to 35 l.), Working on liquid fuel, during the transportation of various cargo, machinery, mechanisms, metal structures and structures of different masses and dimensions using trailers or devices. 2.2. Observation of loading, fastening and unloading of transported goods.

2.3.

Important

Refueling the tractor fuel and the lubrication of the tractor and all trailed devices. 2.4. Detection and troubleshooting in the tractor. 2.5. Production of current repair and participation in all other types of repair of the tractor served and trailers.

3. Employee Rights The tractor driver has the right: 3.1. All social guarantees provided for by law. 3.2.
The following dangerous and harmful production factors may affect the employee: - physical overload; - increased or reduced air temperature of the working area; - increased air mobility; - overvoltage of visual analyzers; - moving vehicles. - Defective tool and adaptation; - The increased value of the voltage in the electrical circuit, the closure of which can occur through the human body; - sharp edges, burrs and roughness on the surfaces of tools and equipment.1.6. In accordance with the current standards for the issuance of special clothing, shoes and other personal protective equipment (PPE), personnel must be provided with special clothing and footwear, as well as SIZ.1.7. Places specifically allocated and equipped for smoking tobacco are indicated by signs "Smoking Space" .1.8.

Official instruction of the driver for cleaning streets

A person who has experience and experience is accepted for the post of tractor driver of the 2nd category. 1.3. The tractor drive is accepted and dismissed from work by order. (Position of the Organization Head) 1.4. The tractor driver of the 2nd discharge should know: - the principle of operation and the device of the tractor served; - rules of traffic; - rules of loading, laying, lining and unloading various goods; - rules for the production of works with trailed fixtures and devices; - ways to identify and eliminate flaws in the tractor; - power of the engine serviced and the limit load of trailers; - the order of registration of acceptance documents for transported goods or work performed; - Rules for labor protection, environmental protection, industrial sanitation and fire safety. 1.5. Professionally important qualities :. (List quality) 2.
The specialist should also understand the principle of operation of attachments and trailed devices, additional devices and engines. It should be good in the tractor control system, know how much fuel needs to operate the unit. The job description of the tractor driver implies that he knows all the rules of laying, loading and lifting various goods.

It requires an understanding of the power supply, lubrication and operation of cooling elements in internal combustion engines. It is also important to know the rules of the road, how are installed and attached attachments, as well as how to carry out work using this technique. It is understood that it can be defective statements, draw up documentation relating to the tasks performed.

The driver of the transport and cleaning machine has the right to meet the draft decisions of the management of the enterprise concerning the activities of the unit.
The driver of the transport and cleaning machine has the right to offer a proposal for the head of improving work related to the obligations provided for by this official instruction.
The driver of the transport and cleaning machine has the right to make a suggestion for consideration of the head of the proposal to encourage distinguished employees, imposing penalties on violators of industrial and labor discipline.
The driver of the transport and cleaning machine has the right to report to the head of all identified disorders and disadvantages due to the work performed.

5.
He also should know the basics of labor protection, sanitation and hygiene, as well as fire safety. The job description of the tractor driver implies that it will carry out events for receiving and transferring shifts, prepare jobs, tools and equipment on time. He is obliged to remove the workplace and draw up the documentation necessary for the reporting. Periodically, his knowledge should be checked by superior guidance. Responsibilities of the instruction for tractor driver 3 discharge worker who received the third category is obliged to be able to manage various tractor systems, the work of which occurs on liquid fuel, participate in the work on transporting machines, cargo, mechanisms and other necessary devices to perform its operations using attachments and trailed devices . It is allowed to control the tractor, the power of which does not exceed 44.2 kilowatta.

Similar articles: