(SF) is to clean the air entering the car. It is recommended to check its condition from time to time so that drivers and passengers of the car do not have to breathe dust. How to replace cabin filter Daewoo Matiz and how often this should be done, we will describe below.

[Hide]

Where should the cabin filter be located?

SF in the car is designed to filter the incoming air from dust, dirt and exhaust gases other vehicles. Before making a replacement, you need to know where the cabin filter is located and whether it is in principle. In most cars, it is mounted in a dedicated connector. And in Daewoo Matiz, the manufacturer decided not to install air filter and didn't even foresee a place for it. If you decide to install the SF yourself, you need to know where to place it.

In practice, it is impractical to install a rounded air purifier in Daewoo matiz in the area of ​​the ventilation device. As a result of the fact that engineers automobile concern did not install a heat exchanger, there is a good place for the SF. It can be positioned between the corrugation and the so-called fan shell. A special rectangular space is provided here. If you have decided where the filter will be installed, then measure the dimensions of the hole. They should be 15 * 11 * 5 cm.

SF for Daewoo Matiz

What will happen to the air conditioning and heating system without a filter?

Although the engineers of Daewoo Matiz did not foresee the presence of a cabin filter in the car, operation without it will lead to serious problems. Continuous driving in an air-conditioned vehicle without a cabin filter can result in:

1. The appearance of problems in the operation of the air system and the heating system. The car owner will be faced with a clogged air conditioner radiator. Therefore, over time, he will have to disassemble the center console and clean the radiator. Repair will take a long time and will require financial investments.
2. A negative impact on the health of the driver and passengers. Dust and dirt from the street, as well as harmful substances contained in the exhaust gases of other cars, will get into the car interior.

How often is replacement required?

Because of design features car changing the cabin filter in the Daewoo Matiz is not provided by the manufacturer.

Therefore, we cannot name clear replacement intervals. If you live in a small and clean city, then you will need to change the cabin filter once every 15-20 thousand kilometers. When operating a car in a megalopolis or large industrial cities, it must be replaced every 10 thousand km.

How to make a cabin filter yourself?

Change filter to Daewoo car You can do it yourself Matiz. You can make it yourself if necessary.

The video contains a brief instruction on replacing the SF (author - Alexandra Orlova).

Materials and tools

To replace or manufacture a filtering device for Daewoo Matiz, you will need:

• cabin filter;
• sealant;
• Super glue.

Choosing the right filter

Most often, for the manufacture, replacement or installation of a cabin filter element in Matiz, SF from Peugeot 607 cars is used. This is a device with the number Wix Filters WP9171. You can also choose a filter from the manufacturer Bosch, article 1987432399, Champion - CCF0048C. For vehicles with air conditioning, use SF from the manufacturer Corteco, catalog number 21653148.

Algorithm of actions for creation

Consider independent process manufacturing SF using a filter from Peugeot 607:

1. Cut off the side plastic side from the device. This will allow you to see the inside of the filter element. On the inside, there is a layer of activated carbon that performs a cleaning function. To increase the cleaning surface, the design of the device is made in the form of an accordion.
2. At the next stage, we cut out the filter element itself. The width of the product should be 10.4 cm.
3. After that, glue the side part to fix the device. It is important to respect the dimensions of the appropriate length. We use superglue for fixing. So you will have a workpiece on your hands, the dimensions of which will be 10.4 * 14.4 cm. This size is slightly less than necessary, but a seal will still be installed on the sides.
4. Use foam rubber as a sealant. It needs to be added on each side. If the material is self-adhesive, then it is fixed without problems. Or use superglue. If necessary, you can additionally glue a layer of door seal on the sides. This will allow the cabin filter to be better fixed in place. seat Daewoo Matiz.

Installing the filter

The first part of the instructions for self-installation filter device, watch the video (the material was filmed and published by the Autocanal Vovka-62 channel).

If you decide to remove and replace the old one or install a new SF, the installation process is carried out as follows:

1. Dismantle the glove compartment. To remove the glove compartment, disconnect the hinges made in the form of caps. They are equipped with latches, so they also need to be dismantled. Proceed carefully when removing as the latches are made of plastic and are fragile. Click on the hinges themselves and remove the glove compartment.
2. After removing the glove compartment, you will see a corrugation, dismantle it. Squeeze this element like an accordion and pull it down. This will open up a place for installing a Daewoo Matiz cabin filter.
3. Before installing the SF, slightly moisten the sealing element. Thanks to this, it will not tear and will not move. It is advisable to treat the installation site with water, in particular, the contact of the seal with plastic. Install the pollen filter in the landing hole.
4. Fasten the corrugation and glove box back. Fix it securely so that it does not creak while driving.

The cabin filter is an element of the car, with the help of which it is possible to clean the air in the cabin during operation. vehicle... If at some point the driver or passengers begin to feel bad, it becomes difficult for them to breathe, then the problem is in the cabin filter.

An element that is practically out of order is no longer able to cope with its duties related to filtering the air in the cabin, and it needs to be replaced.

ATTENTION! Found a completely simple way to reduce fuel consumption! Don't believe me? An auto mechanic with 15 years of experience also did not believe until he tried it. And now he saves 35,000 rubles a year on gasoline!

An interesting fact is that when creating Daewoo nexia the manufacturers did not plan to install cleaners in the cabin. However, after several updates, it was decided to equip the car with an air conditioner and a cabin filter.

Where is the filter located?

In most foreign models, the cabin filter can be found behind the glove compartment. But manufacturers Daewoo Nexia distinguished themselves and installed the part in the main compartment of the air conditioning system. Therefore, it takes a little work to get to the filter.

The price for the original cabin filter of this vehicle model is 350 rubles. The filter article number is 28828822. In addition to the original element, there are analogs that can also be used when replacing it. The most popular options, along with the cost, are shown in the table.

Manufacturing company	vendor code	Cost, in rubles
TSN	97110	120
Big Filter	GB9922	300
Fortech	FS132C	250
AMD	AMDFC54	200
3F QUALITY	E2533	250

Replacing the cabin filter

You can replace the cabin filter with your own hands, saving a significant amount of money that would have to be spent when visiting the station Maintenance... If you wish, you can watch a video of installing a new filter.

Tools

Before talking about replacement, you should clarify with what tools you can do this. To carry out the procedure, you will need to stock up:

• with a knife;
• a screwdriver;
• new cabin filter.

Also, experienced motorists note that replacement work requires careful and careful execution, since not only the cabin filter will be affected, but also the air conditioning system in which it is located.

Replacement steps

The sequence of actions for replacement consists of several steps:

Step 1. First of all, you will need to remove the system seal. To do this, use a screwdriver to unscrew the screws securing the cover made of plastic. You also need to remove the visor. After that, the cover can be easily removed, and the plate itself can be taken to the side. This will open the way to the old filter, which will need to be dismantled.

Step 2. Then you can start installing the new item. You need to insert it horizontally. A rubber seal should be attached to the top of the filter, which contributes to a reliable fixation and prevents the penetration of dirt into the passenger compartment.

Step 3. When the installation works new part will be completed, it will be necessary to reassemble the structure of the air conditioning system. In this case, you need to ensure that each detail falls into place. If any element wobbles, it must be reinstalled.

What about a rectangular filter?

If a rectangular filter is used as a replacement element, its installation will have several differences. For a successful installation, you will need to unscrew a few additional screws holding the cover and visor, and also cut off the partition with a knife.

The partition is located in the rectangular opening of the air collector, where the filter will subsequently be installed. The advantage of this installation is the reduced risk of damage to other elements of the vehicle structure.

Why is it important to replace the filter in a timely manner?

If you do not change the cabin filter in time, it can affect the performance of other devices and systems in the car, worsening their general condition. Thus, the service life of each element will be significantly reduced, and in the near future after the failure of the cabin filter, the systems and devices in use will also stop working. Ignoring timely replacement will result in costly repairs.

Also, a poorly functioning cabin filter can harm passengers and the driver. The fact is that this part prevents poisonous substances, dust and other suspended particles from entering the interior. In this way, old filter turns out to be a bad obstacle, and all toxic substances will penetrate into the interior, poisoning the air. The respiratory organs of all people who sit in the car will suffer.

As a result, it should be said that the cabin filter is a very important part, which it is recommended to replace in Daewoo Nexia every 10-20 thousand kilometers.

The owners of Daewoo Nexia change the filter element of the cabin according to the mileage, but this must be done twice a year - in spring and autumn. This will allow for better filtering of the cabin and avoid many negative consequences for the human body.

Video

The video material will tell and show how to change the cabin filter in a car, and also tell about some of the subtleties and nuances of the procedure

Replacement process

Many car owners go to a car service to change the Daewoo Nexia cabin filter. This does not need to be done. The replacement process is so simple that you do not need to have special knowledge or professional skills to change the filter element of the cabin. Getting started:

1. We open the hood.

   First of all, unscrew the bolts. After that we take out the panel.

2. Remove the air intake panel under the windshield.

   Then we fold back the panel. Condition of the old cabin filter. We take out the old cabin filter.
   

3. Remove the cabin filter.

   Cabin filter. We insert a new cabin filter. This is how it looks.
   

4. We carry out the reverse assembly.

   
   

As you can see, changing the Daewoo Nexia cabin filter is quite simple. This does not require special tools or other devices.

Filter selection

The choice of a cabin filter should be taken quite seriously, since it will determine how high-quality the air filtration in the cabin will be, as well as the direct effect on the human body.

28828822 - original catalog number of the filter salon Daewoo Nexia. The cost of the element is 500 rubles.

Besides original part there are a fairly large number of analogs:

Conclusion

Having considered all the pros and cons, we can come to the conclusion that replacing the cabin filter is simply a necessary measure, since you cannot buy new health, unlike a car. Replacing the filter element with your own hands with a Daewoo Nexia is quite simple and does not require special knowledge. We do everything according to the instructions and everything will work out.

Diameter 175mm, height 10mm.

The purpose of the cabin filters is to prevent dust, pollen, soot and other pollutants from entering the cab. It is recommended to change the filter more often. This is especially true for filters for Daewoo Nexia. These filters are inexpensive and need to be changed more often. Replacing labor will not be big.

Better to use active carbon filters. They provide additional protection against vehicle and industrial emissions. The concentration of benzene in the cab can be up to 4-6 times higher than outside. The activated charcoal cabin filter protects passengers from unpleasant odors... The filter also prevents dirt from accumulating on the inside of the window.

A quality cabin filter helps to ensure good view from your vehicle (a dirty cab filter causes fogging under certain conditions). Clean air in the passenger compartment contributes to the overall well-being of the driver and passengers, thereby ensuring safe driving.

Daewoo Nexia is the successor of the Opel Cadet. Since 2002, the second generation of Nexia has been produced in Uzbekistan - Uz Daewoo Nexia. It is characteristic that the factory did not initially provide for the installation of any filters. It was later, when the need for air conditioning of the cabin arose, the engineers came up with an original way out. They found a place to install: in the air intake heating system and the main compartment of the air intake. A round filter was made for the heating section, and a filter of the appropriate size was selected for the air conditioning section.

Instructions for self-replacement of the Daewoo Nexia cabin filter + photo and video

Here's what's under the hood (fig. 1). It is necessary to remove the rubber strip of the partition engine compartment(red dotted line), dismantle the plastic cover and the waterproof plastic visor that covers the air intake compartment.

Rice. 1 Replacing the cabin filter with a Daewoo Nexia

Remove the plastic cover (3 screws) and the plastic visor. (Fig. 2)

Rice. 2

Under the visor we will see the cabin filter (if there is one) and we will see the rubber seal of the air duct compartment for heating the passenger compartment. (Fig. 3)

Fig. 3

Fold back the rubber seal and remove the round filter (fig. 4)

Fig. 4

This is how this filter is correctly positioned. (Fig. 5)

Fig. 5

We change these filters. Replacing filters is best done with an assistant. Filters are somewhat difficult to insert. Most likely, already in the new models, the cabin filters will be located in the place familiar to many models - under the glove compartment.

Also watch the video on replacing Daewoo DIY Nexia:

How to change the cabin filter on a Daewoo Nexia?

If suddenly the windows of your four-wheeled pet Nexia fog up for no reason. If the inside windshield constantly covered with a light coating of dirt and dust. If the air in the passenger compartment even in the early morning remains "heavy": with an admixture of gases and unpleasant odors, it means that we can say with absolute certainty that the replacement of the Daewoo Nexia cabin filter is not far off.

Replacement instructions

The purpose of this cleaning element- fight against the ingress of soot, dust, pollen, "heavy" unpleasant odors into the cabin of your car. It can reduce concentration by 4-6 times harmful substances inside the car. The procedure for replacing the purifier itself is extremely simple and will not take more than 20-30 minutes of time. However, if you decide to do this yourself and do not have sufficient knowledge and skills, you need to be very careful, carefully follow the video and photo instructions found.

Where is?

Automakers fit a cabin air filter on almost everything modern cars... However, despite the fact that the Daewoo Nexia is the successor of the Opel Cadet, and has been produced in an updated version since 2002, in the original configuration, the presence of a cabin filter was not provided at all. It was only after the car was equipped with air conditioning that Daewoo Nexia's design engineers found the original places to install the air purifiers. Therefore, motorists have to install and change air cleaning elements themselves.

The location of the filter elements of the air cleaning system

Search behind the glove compartment, as in many models of foreign and domestic cars, useless. The designers decided to place them in the main compartment of the air conditioning system and the air intake of the vehicle's heating system.

A round one was suitable for the heating compartment, and a rectangular one for the main air intake.

What do you need?

Similar news

DAEWOO NEXIA - review - 20 - Replacement cabin filter 1

A15SMS, N150 car in possession for almost 2 years, I am satisfied with the machine, although I had to modify the body of the n150, 2009

Replacing the cabin filter Daewoo Nexia/ Daewoo Nexia

Hello everyone! In the New Issue, let's go over cabin filter for Daewoo nexia! If you like the video, it is obligatory.

Despite the fact that the air cleaning elements are located not under the dashboard, but under the hood, for self replacement cabin filter on Daewoo Nexia you only need:

• screwdriver for loosening screws;
• a knife to cut off the air intake baffle or make an incision on the filter element;
• skillful hands and a little patience.

Stages

Replacement air purifier in the heating compartment is carried out in two stages, it is necessary:

1. Delete rubber compressor.
2. Unscrew the screws holding the plastic cover and visor.
3. Remove trim and drain protection plate.
4. Fold back the round rubber seal and remove (if any) the old element.

The first stage of replacing the filter of the air cleaning system

We pass to the second stage, you need:

1. Clean and vacuum the attachment point.
2. Insert new filter in a horizontal position.
3. Replace the round rubber seal.
4. Assemble the entire structure in reverse order.

The second stage of replacing the air cleaning filter element

If you passed everything correctly, then the structural element of the compartment should fit tightly, without backlash and wobbling.

You can also install (or replace) a rectangular salon filter. It is located in the main air intake system.

Similar news

For this you need:

1. Remove the screws holding the plastic trim and visor.
2. Pull out trim and drain protection plate.
3. Cut off the interfering partition in the rectangular opening of the air intake with a knife.
4. Install the rectangular element into the duct.

Installing a rectangular filter in the air intake

With a little smartness and patience, you can install the cleaner without sawing or cutting directly under the hood. It is enough to simply cut the element in the middle, thereby increasing its flexibility. Thanks to this, it will easily snap into place.

The second option for installing a rectangular air cleaning element Self-diagnosis and change of pressure sensors for GAZ cars Oil pressure sensors are necessary to take care of the state of the complex of accounting lubrication programs. Inattention to their signals can lead to significant damage to the motor and difficult and expensive repairs. Indicators of pressure of engines of GAZ cars Pressure in ...