Oil filter 2110 valves. How to unscrew the oil filter (without applying the key)

Hello! You do not tell me what kind of filter MANN-FILTER goes to VAZ 2110 16 valves? (Valery)

Good afternoon, Valery. Your question is how never relevant for domestic motorists and now we will give several recommendations about this.

[Hide]

What filter is suitable for VAZ 2110?

Spring came, which means many of our motorists are accepted for replacing oil. The motor fluid that has spent its resource needs to be changed every 10 thousand km of mileage on average, sometimes this interval can be increased or reduced depending on the peculiarities of lubrication and its condition. Accordingly, a filtering element will also change with the consumable material, otherwise the replacement simply does not make sense.

The question is which it is better to buy Matt, one owner "dozens" occurred. But we will not recommend that one or another products, since it is not clear to answer this question due to the fact that the filter is in principle a universal product. The same MF model can be used both on Russian Field and on a foreign car. So you need to do the choice, relying on manufacturers.

Having visited any domestic auto-store where you are going to buy MF for your "dozens", the seller will most likely benefit you to buy a filter element of the company MANN. Products of this company has long established itself among our car enthusiasts. As practice shows, MANN filters perfectly cope with the tasks assigned to them, which is why these MFs are increasingly buying Russian drivers. As for the catalog number, which will help you purchase the desired detail, then it is W 914/2.

No less qualitative to the MF from the Bosch manufacturer. Before buying details, make sure good conditionSo that the filter does not lend you in the future. In particular, digitate the condition of the housing and the lid of the element. The case in general should be durable, and the sealing gum should be tightly in landing place And it should be elastic. If you have any questions about replacing motor fluid, we offer you more detail with the detailed process for replacing the lubricant described

Some of us have garages with you if there is a pit in it, then it is almost 100% conditions to make a regulatory. It is a replacement of oil in the engine, replacement of the air and oil filter, and actually salon filterif you need and. This is a mandatory regulatory terms. Let's say so - many save on something and do not change air filter (although I think it is not right), but here oil filter Need to change necessarily! But there is a big problem - if it is tightly twisted, then unscrew it is very difficult! How it's easy to make it yourself, today is a small instruction ...

Really guys personally came across such a problem on my Ford, the oil filter was so much twisted that it was almost impossible to surround it with his hands - eh, and I was soaked then. The main reasons for such a problem:

• When replacing the oil, the filter twisted well, many services make it special keys.
• He bought from time to time. This also happens high temperatures, and get some oil on the gasket, simply - "stick" it to the engine.

Actually these are the main two reasons, in any case, you climbed to unscrew it - it does not succumb to it, complicates this process uncomfortable location (as a rule, it is lower, almost under the engine). Also often hands (or gloves) in oil, so unscrew even more difficult, just slides over the surface.

Why can not leave an old filter?

Very frequent question - all because when the engine is working, the chips are formed (banal wear), also oil burns, contaminated, can penetrate inside and dust. All this "case" sets out on the filter (on its cleansing paper surface). If you want - the filter is a "motor liver". If it were not, then the engine wear took place much faster (scientists counted up to 5 times).

For service life of 10 - 15,000 km, it is clogged almost completely, and leave it to work with a new oil - it is impossible! Be sure to install a new filter element. Bentally will not have enough oil pressure, and the engine will suffer from.

So the air filter is not as critical (although I consider them also need to be changed), and it is very simple to unscrew them. But the oil change must be changed.

Which way to unscrew

Te who can't unscrewed, start looking for information - and in what side does it unscrew? Maybe I just do not go there? CAN!

But the filtering element is unscrewed -, that is, as many of all nuts, with normal (not reverse) thread. So if not going, you need to resort to special methods, about them below.

How to unscrew if you bought?

I will tell you several ways that 100% will help you unscrew this element, but we drove:

• Banally Hands . Often you just do not have enough strength, enough to call a person "more powerful" and everything can work out. I will say so in 80% of cases unscrewed with your hands. And you need to twist it again with your hands, tight! IT'S ENOUGH!

• Special key . I already wrote about him somehow, you can, of course he is not always at hand, but if there is a friend on the car can take almost any parts of the spare parts and buy it. I personally even have seen in several supermarkets, the cost is spearing about 200 - 300 rubles. Everything is easy and simple with him, we engage and unscrew, of course, the body of the element will face, but in fact it is already not needed.

• Rope and screwdriver (another lever) . Sometimes another generator belt or timing belt is used. What we do, tighten the loop around the filter, stretch the screwdriver, tight. And try to unscrew. The main thing is that the rope or belt, do not slip.

• Hammer and long and durable screwdriver . Actually, this method is unscrewed by most of the filtering elements. Since the walls of the element are soft, usually aluminum, or tin, and other soft metals. It makes it very easy (just like a tin can) that we are doing - you score a long and durable screwdriver through, that is, to go on one side, and came out on the other. And then you unscrew the lever. The most important thing is that everything can be done without special key, and actually with the use of those tools that are always in the garage. Minus - only dirty hands, because part of the oil is always inside.

• Hammer and chisel . This is generally the method that says "Atas", here and explain, there is nothing to explain, take chisel and "Krentachim" on it with a hammer, the most important thing is closer to the bottom, to the place of fastening, and counterclockwise. The body, of course, the whole will face, but most importantly, what to unscrew. The minus here is not only that you can flasher, but something else can hurt the engine block chisel, I personally advise you a way with a screwdriver, yet it is less dangerous.

As you can see anything complicated, you can do without a special key, just breaking through the housing with a screwdriver.

In order for your VAZ 2110 to always work properly, it is necessary to periodically devote the time for its diagnosis and simple repair. This repair of VAZ 2110 refers to the replacement of the oil filter and the engine fluid. Today you will learn what better to put the oil filter (hereinafter - MF) on the VAZ 2110, which is necessary for this and how to implement the replacement procedure.

[Hide]

Which is better?

About what better oil filter, every owner of the VAZ 2110 was conceived. But it will not be possible to definitely answer this question. Why? Because this product is universal, accordingly, it is necessary to choose among certain manufacturers.

If you ask the store to give you an oil filter for VAZ 2110, then you will most likely offer the MANN filter. This element is high-quality and manufactured by MANN has already won its place in the domestic segment. automotive market. Such products trust our motorists and in most cases it copes with its tasks for all 100%.

The same can be said regarding the butter filter from Bosch is very high-quality products. Therefore, buy MANN or BOSCH MF and you will be sure that these firms will not let you down.

Sorry, currently there are no accessible surveys.

We carry out a replacement

If you decide to replace your own, then you will use this instruction manual and several tips described below.

Required tools

To dismantle the oil filter on its VAZ 2110, you may need a special oil clip key. Sometimes MF accresses with threads and it happens to relieve it. In this case, the key may be required. But if you have no such key, you can use the usual screwdriver.

Step-by-step action

1. Before replacing your vehicles, it is a pit or an overpass. You will have to merge the engine fluid, so the car must be warm, otherwise from your VAZ 2110 will not be able to get out of all consumables. If the engine is cold, then the consumable material is viscous, which will not allow it to completely exit the engine.
2. Click under the bottom and, substituting the container, using a wrench to unscrew the bolt, which serves as a plug hole. After turning the lid, you will have to wait until all the exhaust fluid escapes. Wait about 30 minutes until the expenditure material fails. When it happened, tighten the plug.
3. Now for the replacement you will need to unscrew the oil filter itself of your VAZ 2110. This can be done both from under the bottom and from the side of the hood. Use the key if you have. If not, it is possible to use a screwdriver. You will have to break through the MF and use it as a lever to open an item, srolling it counterclockwise.
   Note: In order not to damage your engine fitting vehicleMF must be pierced from the side that closer to the bottom.
4. So, when MF is dismantled, you can start installing a new item. Take a new MF for VAZ 2110 in hand - you will need to pour a little engine fluid into it. Fill oil inside - quite a bit, about half of its volume - as well as lubricate the sealing rubber around the thread hole. This is done so that in the process of operation of the MF vehicle does not accumulate to work surfaces under the influence of high temperatures.
5. Tighten the new MF, but do not overdo it. It is not necessary to use the key for this.
6. Now it is necessary to pour a new consumable material. Unscrew the cork for the liquid bay and fill as many mm as it is required to pour into your engine. Periodically check the level consumables By Schu, not to pour. By the way, the level should be in the middle of MIN and MAX marks. Before checking the fluid level, wait a few minutes so that all MM can drag into the crankcase. When the level is normal, check the checksum and after about 1 hour after stopping again check the readings. Also check if your MF does not happen.

In general, this procedure for replacing the component is completed. As you can see, there is nothing difficult about it, it is only important to listen to the recommendations and perform all the actions that the result is good.

Basic information on the change of MF is presented on video.

Oil lada filter 2108-01012005-08

In Russia, the car VAZ 2110 was produced in 1995-2007. from gasoline engines 1.5 and 1.6 liters. Regardless of the volume of the engine, from the plant on the VAZ 2110 car was installed one of two oil filters:

Lada 21080101200508 Price for the item - from 190 rubles. Oil filter manufacturer - Avtoagregat JSC. The company is basic supplier Original filter components on the conveyor for cars VAZ. The oil filter of this manufacturer has a lot negative reviews We used by car owners. Of the main drawbacks - poor quality and small area of \u200b\u200bthe filter element;

Salute 21081012005010 Manufacturer - Salute Filter CJSC. The average price is 160 rubles. Another supplier of original oil filters for the company VAZ since 1997. The parts model has the original design of the bypass valve, which provides a permanent passage of oil through the filter, even when the filter element is scored. From disadvantages - poor-quality filter paper, in which trifles are often formed during operation.

General Parameters of oil filters VAZ 2110

You can also meet the original oil filters for VAZ cars under the following catalog numbers:

• 2105-01012005-82;
• 2105-01012005-00;
• 2108-01012005-82;
• 2108-01012005-00.

The filter model starting with the number 2105 is a bit longer than 2108, and is used mainly on the old models of VAZ cars with rear wheel drive. The last 2 digits indicate the supplier.

If you should pay attention to the analogues:

Sakura TC-25011K Manufacturer - Sakura company. Price - from 140 rubles. Even has both negative and positive feedback. Of the main flaws - a poor-quality filter element;

MANN W914 / 2 The manufacturer is a famous German company MANN + Hummel. Part price - from 170 rubles. The products of this company trusts most VAZ car owners. The item has only positive feedback. The main plus of this model is the high quality of the filter element;

Asakashi C0065. Manufacturer - japanese company JS Asakashi. Price - from 140 rubles. The item has a good combination in the price / quality category.