Recommended motor oil for Kia Cerato. Recommended motor oil for Kia Cerato Motor oil for KIA Ceratog

By selection lubricants It is necessary to take into account the requirements set forth in the instruction manual for the machine. Special attention should be paid to the recommended engine oil for Kia Cerato.: Pouring inappropriate by autosal parameters will bring irreparable harm to the motor.

Before buying lubricants, you need to familiarize yourself with the information set out in the manual to the car. It is worth paying attention to the following characteristics of the recommended engine oil for KIA Cerato:

• viscosity;
• class;
• tolerances

It is also necessary to take into account the basic base of oil for Kia Serato: synthetics, semi-synthetic, mineral water. The temperature behind the car plays an important role in the selection of lubricants. Depending on the season, motorists choose a car, designed for winter or for summer, or all-season cars.

Kia Cerato Koup TD 2009-2010 releases and Kia Cerato TD 2009-2010

Manufacturer Kia Cerato for 1,6L and 2,0L motors, recommended to pour motor lubricants having the following parameters:

• quality class by API - SL or SM;
• according to ILSAC - GF-3 and more.

Viscosity lubricant Depending on the temperature behind the car, you need to choose from Table 1.

Table 1 Temperature ranges, as well as recommended viscosity values \u200b\u200baccording to SAE standard.

* 1 - To achieve a smaller fuel consumption, you can apply an automatic with characteristics:

• according to APISL or SM;
• according to the ILSAC -GF-3 standard.

From Table 1, it should be used, for example, a 5W-20 or 5W-30 car at a temperature of from-30 0 s (or less) to +50 0 s (or more) petrol engines. Or 20W-50 in the temperature range from -6 0 s to +50 0 s (or more). The remaining oils depending on temperature mode selected similar method.

Kia Cerato LD 2004-2009 release

Based on the machine manual, the bay should use lubricants with such parameters:

1. 1,6L and 2,0l auto motors operating on gasoline:

• in accordance with the classification of API -SL or SM;
• according to ILSAC -GF-3 or more.

1. Diesel power units:

• according to the API specification - CH-4 or higher;
• in accordance with the ACEA - B4 system or higher.

The viscosity of the oil is selected from Table 2, taking into account the temperature range at which the car will be operated.

Table 2. Temperature ranges and recommended viscosity values \u200b\u200baccording to SAE standard.

* 1 - reduction of consumption fuel mixes Promotes lubricant with characteristics:

• by sAE classification 5W-20 or 5W-30;
• according to the classification of API -SL or SM;
• according to the ILSAC -GF-3 standard.

According to Table 2, for example, for diesel engines It is necessary to use 0W-30 at temperature conditions -30 0 C (or less) to +8 0 C, and the liquid 5W-30 is used in the temperature range from -25 0 s to +40 0 C. The remaining viscosity, depending on the temperature regime Calculated in the same way.

KIA Cerato Koup TD FL 2011-2013 releases, Kia Cerato TD FL 2011-2013 release

From the operating instructions for gasoline power aggregates 1,6L and 2,0L need to use lubricants that meet the requirements:

• quality class according to the API - SM, if the specified car is not available, then it is necessary to use liquid class SL;
• according to ILSAC - GF-4 and more.

According to the viscous parameters, the desired engine fluid must be selected from table 1.

Reduce the fuel consumption allows the machine with characteristics:

• according to the classification of SAE 5W-20;
• according to the API standard - SM;
• in accordance with ILSAC - GF-4.

Kia Cerato Koup YD 2013-2016 release of KIA Cerato YD FL 2017 release

According to the manual to the car, it is allowed to pour engine oils related to the requirements:

1. Motors 2.0 MPI and 1.6 MPIs operating on gasoline:

1. Automotive 1.6 T-GDI, operating on gasoline:

• according to the ACEA - A5 and higher specification.

1. Diesel power units U II 1.6 VGT, equipped with a sump filter:

• in accordance with ACEA - C2 or C3, in the absence of ACEA C2 or C3, API - CH-4 is allowed.

1. Diesel power units U II 1,6 VGT, not having a diesel filter:

• according to ACEA - B4, in the absence of ACEA B4, the CH-4 API is allowed.

Choose a viscosity vehicle depending on the temperature mode, can be from table 3.

Table 3. Temperature ranges, as well as recommended viscosity values \u200b\u200baccording to SAE standard

* 1 - For economical consumption of fuel, it is better to pour the engine fluid:

• according to the classification of SAE 5W-20, except for the countries of the Middle East;
• 5W-30 for the countries of the Middle East.

* 2 - To the countries of the Middle East include Libya, Algeria, Morocco, Tunisia, Sudan, Egypt and Iran.

* 3 - Reduce the consumption of combustible mixture allows the machine

• according to the classification of SAE 5W-30;
• in accordance with ACEA - A5 or higher.

From Table 3, for example, for diesel engines It is necessary to use SAE 15W-40 liquids at temperature conditions from-17 0 s to +50 0 s (or more). BUT motor lubricant Class 0W-30 in the range of temperatures from-30 0 s to +30 0 s. Similarly, viscosity is selected for other temperature modes.

Kia Cerato YD 2013-2016 releases

From the manual it is worth pouring engine fluids that meet standards:

1. Engine 2.0 MPI and 1,6 MPIs operating on gasoline:

• according to the classification of API - SM and higher, if the specified lubricant is not available, it is necessary to use the SL liquid;
• in accordance with the norms of ILSAC - GF-4 and higher;
• according to ACEA - A5 and higher.

1. Gasoline Automotive 1.6 T-GDI:

• according to the specifications of ACEA - C2, C3, A5 and higher.

Motor oil viscosity must be selected on table 4

Table 4. Recommended viscosity of liquids depending on the temperature conditions overboard the car.

1 - Save on the consumption of fuel allows the car 5W-20.

According to Table 4, for example, for the countries of Europe, it is recommended to cast an automation of 0W-40, 5W-20, 5W-30, 5W-40 at temperatures from -30 0 s (and less) to +50 0 s (or more). In the same temperature range, except for Europe, it is recommended to pour 5W-20 or 5W-30.

Conclusion

In the instructions for the machine indicated not only recommended motor oil For Kia Cerato, the manufacturer also describes the optimal duration of the change of lubricant. Draws consumer attention to the possibility of applying motor fluids With the designation of ENERGY CONSERVING OIL - energy-saving car. Their use makes it possible to reduce fuel consumption by reducing the friction resistance inside the auto motor. At the same time, in the manual, it is described that to feel the benefits from energy-saving machines will not immediately succeed, real savings can be treated at the expense of the total economy of the combustible mixture for the use of such oil.

The question of which oil to fill in Kia Cerato is becoming increasingly relevant, because budget carsSince 2004, enjoy the most huge popularity among domestic motorists through acceptable cost and excellent technical specifications.

What motor oil is better to pour into the Kia Cerato engine in the summer?

To understand what engine oil is better to pour into the KIA Cerato engine in the summer, it is recommended to visit the official dealership. Relatively recently, the official supplier of the company KIA has been listed concern Shell.: The manufacturer's plant noted that when replacing oil in cars, Motor oils of this company are recommended to use the Cerato line. However, it is worth noting that at present the official supplier of lubricants is Total, while summer replacement Oils, you can use Shell products.

Often, during the warranty maintenance, Specialists of the official KIA service when replacing motor oil use Mobil-1 liquids, which causes the most real perplexity from the car owners. It is explained by the fact that the Mobil-1 oil is suitable for kIA engines in all respects and is indicated as alternative option Replacements.

Which oil is better to fill in an automatic box (automatic transmission) Kia Cerato?

Sooner or later, owners this car Faced the problem of replacing the gearbox oil, absolutely not knowing about when and what oil is better to fill in an automatic box (automatic transmission) Kia Cerato. Official information about the car says that transmission oil For the automatic transmission automatic transmission, the car should change after 90,000 kilometers of the car, however, in the case of increased operation of the car, the replacement should be carried out every 50-60 thousand kilometers.

For Cerato with a 4-speed box, it is recommended to use a certified oil Hyundai. ATF SP-III, Mitsubishi Diamond ATF SP III in the amount of 6-8 liters can be applied as an alternative. For 6-speed automatic transmission optimally, the use of Hyundai ATF SP-IV in the amount of 10-12 liters about full, as well as 5-6 liters with a periodic partial replacement.

What oil is poured into the mechanics at the plant (official) in winter for Kia Cerato?

The ignorance of which oil is poured into the mechanics at the plant (official) in winter for KIA Cerato can lead the occurrence of problems in the operation of the car, because the incorrectly chosen transmission oil is the cause of most breakdowns among cars equipped with mechanics. Experts note that the most optimal option To replace the oil transmission oil on Cerato is Castrol products (SMX-S 75W85), zIC oil (G-F Top 75W-85), as well as official transmission oil manufactured by Hyundai.

The main goal of creating car Kia. Cerato initially was to compile competition with the five middle-class leaders: Skoda Octavia, Honda Civic, Toyota Corolla, Ford Focus and Mitsubishi Lancer. Cerato made his debut in 2004 and immediately won the bestseller status on the US market, where the model was published called Spectra. The first significant update occurred in 2008, when the second generation of the sedan, known in Europe and the United States called Forte, was presented on the public at the Sydano Auto Show. Compared with the first version, Cerato received a modified suspension and interior, elongated wheeled base and body. The height of the car is reduced by 1 cm due to the corresponding reduction in clearance. The model has become even more reliable and maintainable thanks to the new design of the rear suspension.

The presentation of the third generation Cerato took place in 2012 in Los Angeles. A new version Took all the best from their predecessors ("Tiger Pail" of the radiator lattice and sports design), adding to this lineup of new power units, new appearance And the interior, as well as the increased volume of the trunk. Separately, the manufacturer focuses on the almost complete absence of vibration and significantly improved sound insulation.

Now in Russia modifications from 1.6 and 2.0-liter motors with a capacity of 130 and 150 hp, and therefore it will be more on the characteristics and choice of oil for these petrol aggregates. These engines work in a pair with a 6-speed automatic and mechanical transmissions and spent in a mixed cycle from 5.6 to 6 liters of fuel per 100 km. At the same time, oil consumption does not exceed 1 l per 1000 km in severe operating conditions. On these moment to choose russian buyers Presented 4 Cerato modifications: premium, prestige, suite and comfort.

Generation 3 (2013 - N.V.)

KIA-HYUNDAI G4FC engine

• What engine oil is filled from the plant (original): 5W-30
• Types (viscosity): 5W-30, 5W-40, 0W-30, 0W-40
• How many liters of oil in the engine (total volume): 3.3 l.

KIA-HYUNDAI G4KD / MITSUBISHI 4B11 engine

• What engine oil is poured from the plant (original): Synthetic 5W30
• Types (viscosity): 5W-20, 5W-30
• How many oil liters in the engine (total volume): 4.1 (up to 2012) and 5.8 liters. (from 2012)
• Oil consumption per 1000 km.: Up to 1000 ml.
• When to change the oil: 7500-15000

Kiia Korean car producers do not have a century-old history, the first models were unpleasant and did not claim to high ratings among buyers. However, now the picture is completely different.

Eleven years ago in 2006, German Peter Schreier became the main designer of the company.

After his arrival design kia cars Carefully changed, the model range expanded. And the brand began to occupy the leading lines in the sales rankings.

To date, the company has models that are already in a premium class.

However, do not forget that the main market is a golf class cars and the main income automaker receives from this segment.

Kia has not exceeded model row There are models that make it possible to make a choice depending on preferences.

Europe loves hatchbacks and universal, in Russia they prefer sedans. Kia's company has a car that meets this requirement.

Meet Kia Cerato!

Car in the body sedan. Its design is recognizable, but not annoying, its outlines can not be confused in the overall stream. It can be a family sedan and a car, which is not ashamed to come to a business meeting. Equipment worthy of auto more high level And the quality of the finish causes respect.

Depending on preferences, the owner can choose the engine. This is either modest in volume 1.6 or more powerful 2.0. However, regardless of the volume, the engine oil is better to choose a qualitative meeting with the requirements of the manufacturer.

LIQUI MOLY, manufacturer of motor oils and auto chemicals takes into account the needs of car owners and lovers brands Kia.. The company's assortment has oils that meet the requirements of the manufacturer. Just below, we will talk about the recommendations.

If you choose oil for gasoline engines Kia Cerato, then right choices There will be Liqui Moly Special TEC AA 5W-30. This NC-synthetic oil provides excellent energy-saving indicators and compatible with all modern systems Neutralization of exhaust gases. At the same time, the oil corresponds to the ILSAC GF5 class, which indicates the improved pumping, filtrates, active resistance to the formation of low-temperature sludge and sediments, as well as oil abilities to protect the engine from corrosion when using alcohol-containing small density gasolines, euro classes 4-5.

IN automatic boxes kia gear Cerato is recommended to use a special oil Liqui. Moly ATF Top TEC 1200 having the necessary classification of Diamant SPIII. It improves the smoothness and clarity of gear shifting and retains the stability of properties during the entire operating life. For mechanical boxes Transmissions Recommended LiQui Moly Hochleistung GetRiebeoil 75W-90 GL4 + transmission oil. This oil protects perfectly from wear, contributing to the rapid transmission.