Dashboard on Lacetti. Decoding dashboard designation on Chevrolet Lacetti

(shield) is a kind of screen, looking at which, the driver gets necessary information About the work of a vehicle system. Without it, it would be difficult to control the speed of movement, mileage, oil pressure or coolant temperature.

In this article, we will look at the staffing panel of the Instruments "Chevrolet-Niva" in the context of its design, informativeness, often occurring problems. In addition, we will talk about tuning models of devices installed on these cars.

What is the "Chevrolet-Niva" under consideration by us is equipped with a shield that meets all modern requirements. It is quite convenient and moderately informative for the driver, without being distracted by the process of managing the machine, had the opportunity to know about all the workflows, and in time was able to prevent faults.

Location

The shield from "Niva Chevrolet" has a classic location. It is shifted to the left and is on top of the steering column. This provision gives the driver the opportunity to observe the testimony of the sensors, without turning the head to the side while driving.

Design features

What can we suggest the instrument panel? "Chevrolet-Niva" is thought out that its shield combines all car control devices. It includes:

• speedometer;
• odometer (kilometers traveled);
• tachometer (crankshaft counter);
• coolant temperature pointers and ambient;
• fuel level index;
• 12 control (signal) lamps.

In order for the driver to follow the instrument testimony in the dark, the shield is highlighted when turned on overall lights. How bright illumination of the instrument panel? Chevrolet-Niva has a function of adjusting the level of lighting of the panel. It provides six special light bulbs.

Important: The shield has an electronic structure, and in case of failure, repair is not subject to! Spare parts in the form separate nodes Panels on sale are not supplied. The exception is only signaling and lighting lamps. In other words, if one would fail at least one pointer, you will have to buy a panel assembly.

Addresses of dashboard plugs

The operation of the instruments is controlled by an electronic module that receives information from the sensors, and sends it to the panel. To connect to it, as well as other nodes, the shield has two pads with the following addresses of plugs:

"Niva Chevrolet": instrument panel, designation

Now consider the "screen" itself. What indicators combined the instrument panel? "Chevrolet-Niva" does not differ in this regard originality. The largest pointers are tachometer and speedometer. Their round scales are located in the center of the shield. The arrows of these devices are driven by small separate stepper electric motors.

Under the tachometer is a liquid crystal screen, which is displayed information about the ambient temperature, as well as time. At the bottom of the speedometer scale - the same display that inform the driver about the overall and daily mileage.

To the left of the tachometer is the scale on the right of the speedometer - the fuel level indicator in the tank. Both instruments have a magnetic and electric structure.

In the lower left corner there are control discharges of the battery, inclusion parking brake, emergency oil pressure in the engine, as well as another backup light. Right bottom corner occupy indicators of envelope far Light Headlights and alarm low level brake fluid.

The top between the tachometer and speedometer scales are arrow activation arrows of turn signals (right and left). Downstairs in the center of the shield is the inclusion indicator alarmAnd under it - the check lamp "Check".

A few words about test lamps

Why do you need control lights on the instrument panel? "Chevrolet-Niva" with their help gives the driver signals, that in some of the systems fails. It looks like this:

Dashboard faults

The dashboard, like any other electronic node, is exposed to such harmful factors such as a short circuit, breaking the power circuit wires or informing, a malfunction of one of the main device nodes. If you had to face a similar problem, first of all, determine what signs of breakage takes a shield:

• the panel does not function at all, but the engine starts and works in normal mode;
• the instrument panel "Niva Chevrolet" is not lit, but all the pointers work (no backlight);
• speedometer and tachometer does not work;
• the instruments of temperature sensors and fuel levels do not function.

In the first case, most likely lost contact on the connectors of the devices. It is enough to discharge the pads, clean the contacts, and everything will work again. Such a malfunction can overtake you in autumn or in winter, when the level of moisture is elevated in the air.

If the instrument panel lamps are not burning on the Niva Chevrolet car, but all its elements work in normal mode, the reason should be sought in the wires of the lighting light bulbs, or in the lamps themselves.

The failure of a tachometer or speedometer also testifies to the breakage in the power chain. The same can be said in trouble in the operation of fuel and temperature sensors.

Disassemble the panel

In the event of a malfunction of a shield, to determine the causes of the breakage, it will have to be disassembled anyway. How to remove the instrument panel? "Niva-Chevrolet" in this sense does not deliver problems.

This is done as follows:

1. Song screwdriver way and remove two plugs. The first is on the right of the emergency signaling button, and the second is in the extreme right corner of the panel laying.
2. Soak the self-tapping screws under the plugs.
3. I pull out the right side of the shield cladding, remove the connectors from the control buttons. Remember (take a picture) which connectors to what buttons are suitable!
4. Take out of the engagement to the left side of the facing, remove the block from the buttons on the headlight and the dimensions. We remove and remove the facing.
5. We unscrew the two screws fixing the dashboard. Disconnect the connectors.
6. Remove the panel.

Any modern car It is equipped with a dashboard that allows you to control the state of the performance of the automotive aggregates. Thanks to the control panel, the car owner can always learn about the emergence of malfunctions. In more detail about what is a LANOS or any other chevrolet modelsYou can learn from this material.

[Hide]

Description and location of indicators and appliances on the panel

Below is a description of the devices for the Lacetti model, however, in Chevrolet Cruz, Lanos, Aveo This shield is generally identical:

1. The light bulb of the anti-slip system system, always appears when the ignition is turned on, if it continues to burn after starting the motor, you need to diagnose the system.
2. ABS lamp, also should not burn while driving.
3. Tachometer - a device showing the frequency of revolutions power aggregate.
4. Indicator activation of the left turn signal.
5. Speedometer demonstrating speed.
6. The activation indicator of the right turn signal.
7. Gasoline volume controller in the tank.
8. Antifreeze temperature controller in the cooling system. If the sensor arrow moves over the red zone, this indicates the overheating of the motor.
9. This indicates the activation of fog-optics.
10. Light bulb of the activation of the rear fog lights.
11. Far light.
12. The airbag breakdown indicator should light up only when the ignition is turned on and shoved after the motor start.
13. CHECK light, when operating the engine, can appear if there are problems in the operation of the power unit.
14. Emergency pressure symbol motor fluidWhen he starts to burn while driving, it is necessary to check the oil level in the engine. Movement with this icon is not allowed.
15. Button to switch the odometer screens.
16. This symbol lights up with a minimum fuel in the system.
17. The odometer screen, where the daily and total car mileage is shown.
18. Manual brake power symbol.
19. Indicator not fastened safety strap.
20. The battery light bulb, always lights up when igniting. If the indicator is on after starting the motor, you must diagnose the battery, most likely, it was discharged.
21. Indicator open doors in the car. If the ignition is enabled, and the doors are open, except the icon on the shield will sound and sound.
22. Symbol of breakage in the operation of the power steering force.
23. Symbol open trunk For cars in the body Sedan (by video author - Konstantin Borzakovskiy).

Possible malfunctions

The fault of the control panel can be divided into two types:

1. Electric faults. Such breakdowns include bulbs, lack of contacts on plugs, as well as problems in the work board. The board itself is responsible for the performance of all light bulbs, sensors, as well as a tachometer and speedometer. If there are problems in the work of the board, the sensors can either work at all or work partially. Such malfunctions are almost impossible to solve at home, so when they appear, you should contact a specialist. If the problem lies in bad contact, then you just need to clean them, and the connectors are better to press each other.
2. Mechanical type breakdowns. The arrow or the reset button was broken, or the glass was cracked as a result of exposure dashboardthat in turn led to the inoperability of the device as a whole.

Instructions for replacing light bulbs in dashboard with your own hands

If you encountered the inoperability of light elements, then such a problem can be solved at home.

How to replace lamps on the car Chevrolet Lanos, Lacetti or any other model:

1. First you need to lower the steering wheel to the lowest position. Having done this, unscrew the two bolts of the decorative plastic lining.
2. Now the lining itself can be pushed, for this you can use a screwdriver. Act carefully not to damage the lining until the click. You need to disconnect the lining with the right and left.
3. When the pad is dismantled, you need to unscrew the upper screw to the fixation of the control panel.
4. Having done this, you need to unscrew two more bolts fixing the tidy.
5. Now the panel can be pulled over. Do not pull a lot - you need to disconnect all the plugs with connectors and wiring, do it carefully to not damage.
6. Next, you need to disconnect the wires and completely dismantle the tidy.
7. Now you can replace the failed light bulbs to new ones.

Video "Tuning of the checkpoint on Lacetti"

What the result looks like - look at the video (the author is Ruslan Poskualyuk).

Diagram of device combination compounds(Start): 1 - mounting block fuses in the cabin; 2 - generator; 3 - a combination of instruments; 4 - engine control system malfunction; 5 - alarm aBS faults; 6 - anti-slip system malfunctioning; 7 - Turning on the Parking Brake and Malfunction brake system; 8 - Signal of non-charge rechargeable battery; 9 - ABS control unit; 10 - Parking Brake Signal Switch; 11 - the brake fluid level sensor; 12 - MR-140 or HV-240 ECU; 13 - Sirius D4 ECU
* ECU MR-140 ** ECU HV-240

Diagram of the compounds of the instrument combination (continued): 1 - installation block of fuses in the cabin; 2 - a combination of devices; 3 - a warningleter malfunction of the steering; 4 - signaling device for the inclusion of the "HOLD" mode; 5 - an invalid driver seat belt alarm; 6 - an insufficient (emergency) pressure pressure of the engine in the engine; 7 - airbag failure signaling; 8 - steering hydraulic control unit; 9 - warning signal; 10 - safety pillow control unit; 11 - ACP control unit (with MR-140 or HV-240 EBU); 12 - ACP control unit (with Sirius D4 ECU); 13 - a switch of an unused driver safety belt; 14 - oil pressure sensor

Diagram of compounds of a combination of devices (continued): 1 - Mounting block relay and fuses in motor compartment; 2 - relay inclusion of fog light in the rear lights; 3 - Relays of foglights; 4 - switches of foglights; 5 - a combination of instruments; 6 - signaling device unclosed trunk lid; 7 - signage to the unclosed door; 8 - an alarm for the inclusion of anti-light lamps in the rear lights; 9 - signaling device for the inclusion of fog headlights; 10 - automotive anti-theft control unit; 11 - trunk lighting light switch; 12 - Land switch of the plaffone at the rear right door; 13 - the end switches of the plaffone at the rear left door; 14 - the end switches of the plaffone at the right front door; 15 - Land Switch Plafthne at the Left Front Door

Diagram of compounds of the instrument combination (continued): 1 - Mounting block of relay and fuses in the engine compartment; 2 - emergency signaling switch; 3 - Headlight Light Switch in the left submitter switch; 4 - turn switches in the left hand switch; 5 - a combination of instruments; 6 - signaling device of left-handed signs; 7 - signaling device of the right rotation; 8 - Far Light Heights Alarm; 9 - devices backlight lamps; 10 - instrument illumination brightness knob

Diagram of the compounds of the device's combination (ending): 1 - Mounting block of relay and fuses in the engine compartment; 2 - mounting block of fuses in the cabin; 3 - a combination of instruments; 4 - odometer display; 5 - speedometer; 6 - tachometer; 7 is a coolant temperature pointer; 8 - fuel level index; 9 - fuel reserve alarm; 10 - control unit of the device combination; 11 - warning signal; 12 - fuel module; 13 - ECU; 14 - car speed sensor (with Sirius D4 ECU); 15 - ACP control unit (with MR-140 or HV-240 ECU); 16 - car speed sensor (mechanical KP)
* ECU MR-140 ** ECU HV-240 *** Sirius D4 ECU

1) Chain of temperature pointer, tachometer, fuel sensor, mileage meter, speedometer and fuel reserve control lamp: MR-140 / HV-240

but. Information about the connector

R / p dashboard

m. Contact Ploda

s202.

2) Chain of temperature pointer, tachometer, fuel sensor, mileage meter, speedometer and fuel reserve control lamp: Sirius D4

but. Information about the connector

b. Conditional designation & and finding contact number

in. Location of connections and mass connections

R / p dashboard

m. Contact Ploda

s202.

3) Chain of control lamps (indication of malfunction, abs, control system, parking brake and charging)

but. Information about the connector

b. Conditional designation & and finding contact number

in. Location of connections and mass connections

R / p dashboard

V / P ABS

m. Contact Ploda

s301 (sedan)

s301 (Hatchback)

s301 (Universal)

4) Chain of control lamps (steering mechanism with a hydraulicer providing variable amplification depending on speed, airbags, oil pressure, seat belts) and maintenance lamps

but. Information about the connector

b. Conditional designation & and finding contact number

in. Location of connections and mass connections

R / p dashboard

L / P Body

5) Indicator chain (front and rear fog lights) and door opening lamp

but. Information about the connector