Frozen castle in the car how to close. How to open a frozen car

Winter is a special time of year for every motorist, when the operation of the vehicle accompany numerous difficulties. After all, it is impossible to predict what a car climbs in the coming days in the coming days the car will undergo. Among typical problems - faceting of doors. What if frozen castle in the door of the car, how to open? In particular, this unpleasant situation often happens after washing. But the problem is possible due to a long-term parking in low temperatures and high humidity. Let's deal with how to fix it.

The most effective methods of opening a frozen castle

How to do and what to do if the castle does not turn around. How to open? First of all, you should not panic and fall into hysterics, as the solutions of the situation are a huge amount. Consider the most efficient options.
Open the central lock can be opened by using a liquid key (or castle defrost).

Another effective way (if there is no special tool at hand, or for some reason you do not want to use winter automotive chemistry) - the use of open fire - ordinary matches or lighters. It is necessary to heat the key carefully the key and inserting it into the well well, try to pull a little. Do it need it very carefully, in order not to break the key itself.

ATTENTION: If the lighter has a directional flame, then there is a chance to warm up not only the key, but also the castle itself, and this is very dangerous.
You can also use any alcohol containing means, for example, toilet water or cologne, as well as directly alcohol itself. This method is effective due to the properties of such organic compounds. The alcohol is able to dissolve the ice due to the active heat release.

Another way to help defrost a frozen castle after washing is to use glass fiber or non-freezers. Using such a modern remedy, do not forget that in its composition it contains a particularly aggressive substance - isopropyl alcohol, which is harmful to the skin.

You can also use the means made on the base of kerosene designed to unscrew the nuts. But here there are some nuances. Such substances have hygroscopicity (according to analogue with brake fluid), in fact, along with efficiency, they are able to further only aggravate the situation, since moisture is drawn.

Of course, if nothing of what was listed does not help, you need to transport the car into a warm place. There and doors seals, and directly the castle will be able to hurt.

ATTENTION: Under no circumstances, do not pour very hot water into the door well. Such actions are fraught with fluid in the electrical wiring.

What to do to not freeze the castle?

In order not to freeze neither doors or locks, it is important to adhere to some rules. Consider them in more detail. Have you noticed that car locks are systematically freezed? Just try to dry them more thoroughly. What to do for this? Leave your transport in insulated boxing or garage literally for a day until all the moisture existing in the door wells evaporates.

In the event that the castle has already been excited, but it does not manage to open the door of the vehicle, the reason is only one - the door approached. In no case do not pull it on yourself, so you will break the seal or handle. It is necessary to push from ourselves back. More rational actions will be pressed on the door. So you are a bit deforming the rubber of the seal and achieve the fact that the ice will start gradually crumbs and eventually stop blocking the entrance.

Cleansing your car from snow, certainly neatly pass the brush and the driver's door canvase from the bottom and above. In other cases, the snow will be able to get inside, he then quickly melts and then easily freezes on the cold.

In order to avoid faceting the doors of the car after washing, wipe the elastic bands of the seal and be sure to lubricate them with a special water-repellent liquid.

Before parking at night, so that the glasses in the vehicle do not frost, it is necessary to air the salon. If the freezing, nevertheless, failed to avoid, and the machine is equipped with electric windows, do not open them under any circumstances. Equipment breakdowns in this case can not be avoided. First, warm inside the car interior, and only then, when the window fills, it can be opened and after that, to process with silicone-based lubricant materials.

In order to reduce the indicators of humidity in the cabin of the car, put a few layers of ordinary newspapers under your feet. They will actively absorb excessive moisture, respectively, its level will not be so significant. As a result, the car will not freeze anything.

What if there is a door in the car?

You left your car literally for two or three hours in the cold and when trying to open it understand that the door approached almost "tightly". What to do? How to fix it? If the car door cameras, you can do this:
Using the brush (and when it is absence - any other remedy available to you), carefully clean from the snow of the edge of the car doors. If the brushes at hand did not turn out, and your gun is a knife, a regular screwdriver or some key, then act is very neat and carefully. Very carefully pull the door of the car. Did she not have served at all? Then push a little and delicately knock on the edges. Then pull the door again. This is a simple procedure repeat several times until you manage to open the doors.

In the case when one of the doors frozen very much, you can try to open the trunk of the machine or the second door. In addition, you can use all kinds of alcohol-containing fluids. Such means need to miss the seals and the edges of the door. An excellent effect is achieved by using a conventional hair dryer. But, of course, if the door lasted on the car park, then this method will be inaccessible to use.

Never water the doors of the car with boiling water, because it is able to easily damage the paint coating. Do not apply ultimate power when opening the door, so you can damage the handles or the door itself. It will not be very good and the idea of \u200b\u200btearing off from the car door using coins, keys or knives, called the seal.

Not the most pleasant procedures to combat the frozen door take time, strength and nerves. Moreover, all these problems can be successfully avoided. How to do it? Quite simple. Before a long parking, it is necessary to lubricate all the insides of the door locks with specialized fluids designed to effectively protect against icing auto parts.

As soon as you turn off the engine, open all the doors. Thus, warm air will be released outside the cabin, and the temperature inside the car, in the cabin, and the street will be almost the same and you can avoid the appearance inside the car condensate. Such a procedure should be performed after each sink.

Run the engine in the frost

To the launch of a vehicle motor in conditions of severe frosts, it is worth considering very seriously, because in this situation it is quite difficult to do. From the very beginning it is necessary to think about how to warm up the battery. To do this, turn on the ignition and melee literally for a couple of minutes. So you can quickly warm up the battery.

Before turning on the ignition, carefully check whether all devices that are taken from the battery are disabled. And only when the battery is warmed, you can run the motor. To do this, squeeze the clutch and then turn the ignition key, including the starter. All this will take literally a few seconds. As a rule, such operations help run the engine. But with a strong frost, they may not ensure the proper effect, which will require the repetition of the above algorithm to obtain the desired result.

But if nothing happened, that is, the car failed to start, but to open the castle, then it is better to contact the specialists who, through the use of special tools, will be able to warm up your transport literally for 15-20 minutes.

If in the car froze the castle and it is not possible to open the door - this is not a catastrophe, but quite a complete situation that requires fast and effective solutions. In this publication, we submitted the most effective ways to eliminate the problem, one of which will help you.

And already at this stage, many car owners discover that after the cold night in the car frozen castle. Some, not thinking, penetrate the salon through the luggage door. But this method is not always applicable: first, the opening mechanism of the trunk itself can be covered with ice, secondly, even by lifting the trunk door, there is no guarantee that it will go further (in many respects due to the construction features of the car), and, Finally, it is impossible to call this way humane. However, there are more humane and reasonable outputs from this situation.

As a rule, the locks do not open if moisture freezes in them. So that it does not get there, in the wells of the locks, it is necessary to inject the well-known aerosol WD-40 or its analogues. It is also useful once to open the trim of the doors and lubricate everything there. The procedure is though painstaking, but one-time and reliable. For the absence of special aerosols, you can resort to the old way: to attach a heating plate or a tank filled with hot water. But here it is worth remembering that later the risk of freezing increases significantly, since the pairs that affect the castle will then turn into ice and significantly complicate the opening of the doors the next day.

Aerosol WD-40

Also answer to the question "What to do if frozen castles in the car? " It can be found on numerous motorists forums, many of which use silicone sprays. They poured each lock to them, door handles outside, and then wet all the rubber around the perimeter of the doors. For the whole car, there are some sex liters of fluid.

Nowadays, almost all cars are equipped with a central lock. It is important to know that most owners allow one serious error: they like to press the buttons from the warm apartment, more than use the mechanical way to open. Often the problem is that in the car I got a battery or covered with ice electric lock. The key is open without difficulty.

If you managed to successfully open the frozen castles in the car, there are a number of ways to make it no longer to be linel. Prevent the occurrence of the problem will help the processing of a sealing gum or the inner surface of the door with water-repellent lubricant, for example, the same WD-40 or a conventional hydrophobic impregnation for shoes. It is also very important to remember that it is necessary to consider snow not only from glasses and roofs, but also with doors. Otherwise, the snow can melt in the warm car, and then frozen and grab the door again.

The arrival of winter always delivers all motorists who do not have the opportunity to put their car on a warm parking or a heated garage, additional problems. And one of them becomes frozen castles in the doors of the car. The struggle with which exactly when it is necessary to go urgently, can spoil the mood for the whole day.

The most correct solution allowing not to think about how to defrost the door of the car's door is to conduct preventive measures. Their correct and timely execution allows you to solve the problem at the probability of its occurrence. So, to avoid unnecessary stresses and time costs.

Preventive actions capable of preventing the freezing of the castle and sealing of the car doors

In order to eliminate the occurrence of such a situation when, after frosty night, the key is not inserted into the door lock of the car, or sealing the door sealing gums, it is necessary to regularly produce the following prophylactic steps:

• After completing the trip, when setting the car in the parking lot, one should drop one - two drops of engine oil or brake fluid on the part of the key that is inserted into the lock. The lubricated key must be inserted into the keyhole and several times there turn it.
• It is best to purchase a special WD-40 liquid that is ideal for lubricating the castle, as well as for its defrost, if you still forgot to make lubricant and he is a frost. At the same time, it is not necessary to store this liquid in the glove compartment of your car, as recommended by manufacturers, and in your pocket. So that she is always at hand.
• If a closing cover is installed on the neck of the gas tank, then with its lock you should do the same operation that was recommended above for door locks. Otherwise, it is not possible to turn out to be without gasoline on the occasion of the inability to pour it into the benzobac.
• For lubrication of doors seals, the following types of lubricant are used:
• silicone, which is impregnated by any sponge, and with its help all seals roll up to the brilliance;
• ordinary glycerin, which is sold in each pharmacy;
• almost any children's cream;
• solidol, though, with its excellent properties, allowing to protect rubber from freezing, he has both negative properties - it is very dirty.

After the car wash of the car, you should start the engine, run the oven and open all the doors and trunk. In this form, the car should stand for a while so that we can join all the moisture remaining after washing on seals and in the cavity of the locks.

After this time, you should open and close the doors several times and scroll through all the locks several times. The resulting ice from mechanical exposure will certainly crumble and disappear. What will exclude the emergence of problems the next morning.

Also, a very good effect can be achieved as a result of purging door seals and cavity. It is quite possible to perform it using the compressor used to pump tires. After such a purge, as well as after the freezing, all seals must be thoroughly lubricating, using the means listed above for this.

If all that we talked above, it was not done, and in the morning there was a problem with the opening of the doors of the car, then you should resort to methods accumulated over the years.

1. You can heat the key with a flame lighter and in such a state insert it in the door lock. After they are fundamentally all the inside of the castle, you can try to open the lock. If nothing happens, then this procedure should be repeated as many times as it is necessary in order for the ice inside the castle melted.
2. If there is no lighter, nor any other heating devices, but there is an opportunity to open the hood, then it is necessary to make it all the key to the brake fluid or non-freezing, which is poured into the washer tank. The moistened key should be inserted into the locking well several times and, having achieved ice dissolution, turn it several times.
3. If the machine is located near the house, in which there is an extension of the corresponding length and hair dryer, the problem will be able to solve literally in a few minutes.
4. From the school year of chemistry, many know that when the alcohol joins, heat is released to the reaction with water. So, it is enough to injected some of its quantity through the locking well into the cavity of the castle, where it will enter into the ice reaction, and it will heat the elements, which will make it easily open the car door.
5. For heating the castle of the car, you can use the exhaust gases of another car, if, of course, its owner has no objections. To accomplish this operation, you will need a hose of a certain size, which is put on the exhaust pipe. Accordingly, the second end of the hose is brought to the castle and warm air quickly quickly makes one's business.
6. You can solve this problem and an ultramodern way. To do this, it is enough to purchase a special key chain in a car shop, which is all called the "castle defrost". This keychain has a long and thin probe, which, feeding from ordinary batteries, heats up to 200 o C. It is simply fit into the hole of the keyhole, due to which the internal details of the castle occurs.

Sometimes there is such a situation that the castle was successfully warmed up, the key turned in it, and the door still does not open. Here it is necessary to understand that the seals are preserved to open the door. In this case, it is categorically impossible to tear the door to ourselves that there is forces, since damage to seals can occur.

In this case, you need to try hard to press the door in several places and even knock on them. However, it is necessary to do this without using any heavy tool in order to avoid damage to the surface of the doors. As a rule, after several attempts, the door can give in.

What do it categorically not follow

First, under no circumstances, it is impossible to water the castle and the door itself boiling water. The consequence of this can be peeling and turning it into rags. In addition, hot water will penetrate into all the free spaces available on seals, as a result of which after its freezing, it may be quite difficult to exit the car.

Secondly, you should never try to heat the larva of the castle with their breath. If you get into the lamb metal, ice plugs are formed from warm and very wet air, which can hardly be melt.

Thirdly, in no case cannot be used liquids, which contains kerosene. Under their influence, the lock of course will open, but it will very soon leave again, since Kerosene has a property to absorb moisture from its ambient air.

In conclusion, I would like to say that, of course, all of the methods listed by us are rather effective and will help solve the problem with the opening of the castles. But why follow myself, when it is enough to simply install the central lock on the car, which will be opened due to the radio command entering with.

So, in the frost Do not open the door to the interior of the car. The reasons for that may be two: either frozen castle, either the rubber seals over the entire perimeter of the door. You can cope with undergraduate methods with both problems.

If it is in the lock, the main problem of solving the problem should be the usual key. First, it can be heated with matches or lighters, and then quickly insert into the larch and thereby put it to heat the locking mechanism. Secondly, in almost any car shop there are "locks of locks" - inexpensive tubes with non-freezing fluid - it is enough just to injected into the larva and wait a couple of minutes.

However, there are situations when there are no matches, nor lighters, no auto shops. For example, the castle frozen somewhere in the distance from civilization: in the forest, in the forgotten by God, the village or on the semi-closed highway ... There is a way out in this case - it will help out the warmth of your body. You can breathe in the larva of the castle or simply please right for it. Not too hygienic way, but when there are no alternatives, he will come down. Suitable for defrosting locks and water from the kettle, but do not forget: if water or other liquid visited the mechanism, it is necessary to handle the WD-40 lubrication, otherwise the next time it will freeze tightly.

When the door approached all over its perimeter, there are also several methods. The ice is not necessarily reloading - it can be simply reckoned: it is enough to knock the fist along the edges of the door. If such a manipulation does not help and the door does not want to open, then the defrost will need. The most humane will take advantage of the hairdryer. And so as not to damage the paint coating, you should not choose the most "hot" mode of its work.

However, if the car is far away from the socket, and there is no extender at hand, it will have to use boiling water, which will help melt the ice pretty quickly. When the door still opens, do not be lazy to call in the auto shop and buy silicone lubricant. To the treated with such composition rubber seals, "stick" will not be, and the doors are no longer called. Periodically, the lubricant layer needs to be updated.

Since you read this material, it means that winter is already in the yard. Well, or now it will come.
Yes, friends, our country is very cold, freezes in it if neither all, then at least a lot. Therefore, today's topic, which is called locks and frosts, is relevant almost year-round.

You know, as in that anecdote ...
At one of the resorts of Sochi, two men are communicated, one - Aborigine, another from the north of the country.

So my first asks:
- Do you have something in Murmansk, the summer was completely different?
And he answers:
- Yes, that it was, only I stood on the watch that day.

Today we will talk about why the locks freeze, what to do so that they do not freeze and separately touch the topic about the freezing of automotive locks.

Causes of frosting castles

Castles freeze in three reasons: this is the presence within moisture, dirt, or lubrication. And often it happens that all of the above is present in the castle in the passage.

If the castle, its nodes and moving elements are in perfectly clean state, the overwhelming majority of modern castles will work perfectly in any frost, including strong enough.

But, alas, we do not live in the perfect world. The presence of spent metal even in a fairly new castle is a natural phenomenon. And we will not be able to avoid moisture from entering the keyhole, since water molecules are always present in the air.
So let's dig deeper.

It is noted that locks with one type of mechanism behave in the cold when working in aggressive street media is better, with another - worse. What does it depend on?
From constructive features!

For example, cylinder locks have increased manufacturing accuracy. The code elements in these mechanisms are negligible, the weight in them is practically absent, and they are often made with great accuracy (up to tenths and hundredths of a millimeter). Therefore, the locks with such a type of mechanism can literally grabbing. As a result, locks with such a type of mechanism on the street work disgustingly. Miserer code elements loaded with a force of funny springs stick together in frost. And the water droplet falls here, all - write "gone".

Suwald castles, on the contrary, in frost, in an aggressive street work better. Code elements in the mechanisms of this type are sufficiently large flat plates loaded with a force of sufficiently powerful springs. Therefore, to cope with mud and moisture to the Suwald castles easier. But among the Suwald castles there are models that work better or worse on the street. This is already associated with the structure of a specific lock model.

A few words about lubrication.

In the overwhelming majority of cases, the lubricant harms the correct operation of the lock including at negative temperatures. Lubrication collects dirt, work and thickens in the cold. Therefore, it should not use it in the locks at all.

For more information about the lubricant in the door locks we told.

So, summarize why the locks freeze.
First, because their structure and design are not adapted to operate in the frost or on the street.
And secondly, because in the mechanism of the castle, dirt was accumulated, working out, lubricant or moisture. And maybe even all combined.

So what should the locks do not freeze?

Choose locks that are designed to operate on the street. As mentioned above, it is better to pay attention to locks with a suvalid type of mechanism. Even better if the Suwald type of mechanism will have a closed type of key window. This is when the key when turning contacts with Suwald with both beards.

In addition, the practice has shown that suvalden locks with more or less rigid springs on Suwalds behave well in Claus.

In order for the lock does not freeze, you need to exclude a direct moisture ingress. No matter how superuse castle was not, but if it rains it and the snow flies - it will freeze in any case.

Another unpleasant situation of indirect moisture from entering the castle and its mechanism is condensate. If there is a minus on the street, and in your garage plus, and in the open cellar "breathes" the potato - the castle will turn in the other and will surely freeze.

If your entrance door to a private house is installed on the interface border. That is, outside the cold door, and from the inside immediately warm, the door lock will be the wool's bridge in this design, to be covered in the other and freeze. In this case, no help to help, it was necessary to think about the castles in advance when designing a particular room.

The specialists of our company periodically arises the task to install the castle on the street gate of the private house. Tell me how in this case we solve the problem. Not cheap, but qualitatively.

Selecting the castle, before installing, we make pocket under it. Pocket is a metal box failed from all sides. Only one line of the parallelepiped is open, the one where the lock is mounted. And already a pocket is welded to the base of the wicket.

As a result, we get a castle, though not tightly, but at the same time high-qualityly closed from all sides. In winter, it will work on perfectly, despite the fact that the wicket of a private house is open to all winds and adversity.

If you want your street lock not froze, it is not only impossible to lubricate, but also need to be kept clean. Periodically cleaned the work and dirt out of it. All this will certainly be copied in the mechanism of the castle, which is operated on the street.

Here are three simple conditions that you need to stick to the lock is not frozen.

1. It should be originally designed for street operation.
2. It should not get moisture
3. It must be clean. It should not be dirt, lubrication and testing.

Freezing of automotive castles

As you already understood, all car locks have a cylinder type of secrecy mechanism, that is, such that least is adapted to operate on the street. Manufacturers are trying to protect them with curtains, but they are far from hermetic. And therefore, on the fact, door car locks are always the most dirty of all possible.

In addition to this cores of all car locks, ranging from the Lada and ending with infinity, made from silumin. If they do not use them for years (which often happens after installing the alarm), the silumin is oxidized and decomposes - the lock is stopped in itself

If five years after the purchase of a car, a battery will sit in the key or key chain of the alarm. Do not be surprised if you can not open the door of the car through the lock. Most likely it is in the zakis, half-sided.

It is on these two reasons: due to the design of the mechanism and due to immobility, with car locks only troubles, and not only in the winter.

Therefore, if you want your car locks do not froze. If you want the door to open from the castle in abnormal situations, well, for example, when the battery in the key sees, you need to adhere to several rules.

1. Once a year, car locks need to be flushed with a large amount of solvent, you can use liquefied kerosene VD-40. Now open and close the locks with the key to the prevention of zaking. And after that, clean the castle with compressed air.
2. After car wash, door locks always need to be highly cleaned with compressed air.
3. Automotive locks in no case are subject to lubricant. No. You are a favorite vadoska hygroscopic, that is, over time, after drying, it will attract moisture, which, as you understand, will not give the best way to operate the locks in the winter. Therefore, it is recommended to use it only in the mode that is written above.

Well, the last advice that we urge you to follow. If you have any abnormal situation with locks - refer to the specialists. You do not need to collect and take attempts to correct the cant if you do not draw a feature in the subject. If you have a tooth, you will treat him yourself? Will you advise about the treatment with the sleeve of Nikhai, who and the tile puts and the toilet bowl? Of course not - if you still have something sound and reasonable, you will immediately beat the doctor, to the doctor. And you need to do with locks in the same way. Moreover, in most cases, you will receive a consultation for free.