Original wheels Toyota Camry 30. Size of wheels, tires and wheels Toyota Camry

It is very important to choose the correct size of tires and rims for the car, because this parameter affects safety, handling and suspension life. If the diameter of the casting rim is large, then a special rubber with a low profile should be put on it. The volume of air in it will be less than in a conventional one, and the suspension will be very stiff. With a small casting diameter and high profile rubber the car will be very soft, but this will have a negative impact on handling. Therefore, you need to find the perfect balance between comfort and handling. Consider these allowed parameters Toyota Camry V50, V40 and V 30 tires.

Toyota Camry V50 wheel sizes

The new generation of the Camry V50 business sedan has the same wheel sizes as the previous SV40.

Which one to choose depends on the driver's preference. When choosing, it is worthwhile to understand what you need from the car: comfort or appearance... On the R16, the car will behave very softly, but outwardly it will become unremarkable. This is not the case with the R18. And if you need an intermediate option, then R17 is exactly it.

Bad news for those looking to install an R18: cars with these wheels are only made in America, so it will be more difficult to get them. In terms of affordability, the best option is the R16, because it goes on most Camry trims. R17 are only on the most expensive versions.

Another criterion when choosing is the color: with dark varnish or with transparent. Casting looks much more impressive with dark varnish, but it is poorly adapted to the climatic conditions in our country: the varnish can crack after a couple of winters.

Toyota Camry V50 tire size

Depending on the cost of casting, rubber is selected. Below is a table with the recommended wheel parameters for the Toyota Camry V50.

Toyota Camry V 40 wheel sizes

The most common type of molding on the Toyota Camry V40 is with a 16-inch diameter, which is found in most trim levels. More expensive trims come with 17-inch trims to accentuate the look of the car. However, if your equipment is not so rich, then you can install the R17 without any problems. This is not the case in our country, but R18 is also supplied for American Camri.

If the diameter central hole slightly larger than the hub itself on the Camry 40, you will need to buy special additional rings to the wheel to help fit it. But if the hole diameter is less than the recommended one, then the disc simply will not fit on the hub: the bolts can get through the holes, but it will not be possible to clamp them to the end.

If you are looking for molding for a tire, then you should use the rule: its width should be 25-30% less than the width of the rubber profile.

Tire sizes for Toyota Camry V40

For Toyota Camry, the size of its tires must be selected one that fits into the car regulations. It should be understood that the tire size depends on the casting parameters. Most cars are equipped with 16-inch ones.

The most optimal size The rubber for Toyota Camry is 215/60 R16.

Externally, a car with 215/60 tires does not look very interesting due to small diameter disks, but this option is the most practical. If, after all, the owner wants his car to look more interesting, then instead of 60, you can pick up 215/55 R17. These two sizes come in the original delivery with the car, however, many install 235/45 R18, but for this you need to buy wheels that go to the American versions of this car. This option will look interesting, for which you will have to pay in comfort.

Toyota Camry V30 tire and wheel size

Unlike all subsequent generations of the Camry XV 30, 15-inch products were installed. For those who like to save money, they are the best choice, because they are the cheapest and take good care of the car's suspension. The maximum die size that can stand on the Camry V 30 is already 17 inches, which will affect the rigidity of the car.

Below is a table permissible sizes wheels on Toyota Camry XV 30

Non-standard discs

If you buy original casting on the Camry V40, then you should not worry if it will fit the car, because this is already foreseen by the manufacturer, but when buying casting for a V40 car from other manufacturers, you should pay attention to a number of factors:

1. Bolt pattern on the hub: 5X114.3 - this means that the fixation is done with five bolts, and the bolts themselves form a circle with a size of 114.3 mm.
2. Maximum diameter: R20.
3. The wheel overhang should be between 35 and 45 mm.

Popular tires among Toyota Camry owners

1. Bridgestone Turanza GR-80. It is not cheap rubber, but it makes the car very soft and quiet. Is the most the best option for the Camry.
2. The Yokohama A539 is ideal in terms of value for money.
3. On Toyota with large engine displacement, owners prefer to install Michelin tires Energy, which behave superbly when driving aggressively.
4. Michelin X-ice and Yokohama IG20 are favorites among winter tires from Camry owners.

Conclusion

The sizes of tires and wheels for Toyota Camry need to be selected only those that comply with the regulations. The choice directly affects comfort and handling. Most optimal diameter disks: R16, and which one to choose specifically for your car is everyone's business, because the regulations provide a choice of three sizes. Each of them can make a soft, unremarkable, or a hard, eye-catching sedan out of a car. All Camry generations, except the V30, have the same wheel parameters, so they can fit from one model to another.

White Camry 40 on huge disks

Factory Casting Parameters:
Center hole diameter - DIA: 60.1 mm, fastening to the hub - nut, bolt pattern 5 × 114.3 mm, thread M12 x 1.5

• 16 - 6.5Jx16 ET45
• 17 - 7Jx17 ET45
• 18 - 7.5 × 18 ET45

Let us explain with the help of what these letters and numbers mean. The first number is indicated for better understanding. The first digit after the dash (6.5, 7, 7.5) is the width, measured in inches, to convert to centimeters, multiply this figure by 2.54.

J- informs the design properties of the wheel (type of rim of the disc), not important for buyers.

NS- indicates that the disk is not separate.

16 - fit diameter, corresponds to the diameter of the tire.

ET45- wheel overhang, in the presented case, is positive and equal to 45mm.

An important parameter is DIA(the diameter of the center hole in the Camry 50 is 60.1 mm), which must correspond seat wheel hub, measured in millimeters. If the DIA is larger than the hub, then centering rings are used, which are made by the disc manufacturers.

• 205/65 R16 94S
• 215/60 R17 93V
• 225/45 R18 91V

White XV50 with excellent wheels

Let's tell you what these numbers mean. The first three-digit number before the slash is the tire profile width, measured in millimeters. The two-digit number after the slash is the ratio of the height of the rubber profile to the width, indicated as a percentage. If the profile width is 215 and the profile height is 60, then 215x0.65 = 129 mm tire profile height. The Latin letter R (Radial) indicates that a radial type tire (radial type automotive rubber supplanted the archaic diagonal). The two-digit number after the R, provides information on the tire rim diameter (rim diameter) and is measured in inches.

The last two-digit number is the tire load index, i.e. what load the tire can withstand within the speed index at correct pressure... For Toyota tires, the load index is 93 and 94, these figures indicate that each can withstand 650 and 670 kg, respectively. The last Latin letter is the speed index, speed mode, within which the use of tires is permissible. In the case of the Camry, the speed index is indicated by letters from S to V. S - 180 km / h, V - 240 km / h.

The pressure in the wheels should be 2.2 - 2.4 bar.

The smallest tires that will fit are 205 / 65R16, maximum size rubber - 225 / 40R19.

When choosing tires for a car, ask the seller or look at the tires yourself for the date of manufacture. Buy rubber no older than three years, after this period it may begin to crack and lose its properties.

This is the date of manufacture of tires.

V40 rim size

Reach (ET45) - the distance between the vertical axis of the wheel and the plane of the attachment point to the hub. Departure can be positive (most often), zero, and negative.

Large and small wheel diameters have pros and cons. This is because the larger the disc, the thinner the rubber profile. Therefore, choosing "rollers" R18 the car enthusiast gets excellent appearance and handling, but loses in comfort and suspension service life. By installing small-diameter "sneakers" on the Camry, it gains a smooth ride and running time and at the same time worsens the spectacular appearance and controllability.

Tire dimensions V40

• 215/65 R16 94V
• 215/55 R17 94V
• 205/45 R18 92V

Black beauties

The tire pressure should be 2.1-2.2 bar, measured on cold tires.

The smallest wheels, which are installed on 40 - 215/60 R16, the largest tire size - 225/40 R19.

When choosing wheels for Toyota Camry, be guided by the tasks that you would like to solve. If the main thing is the appearance, showiness of the car and handling, then choose the large R19 wheels. But be prepared for ride comfort and suspension life. If the task is to drive comfortably, softly and take care of the chassis, then the R16 wheels are your choice.

Many car owners buy large wheels and tires for the summer season, while winter tires remain small in diameter.

Camry V30 tire and wheel size

Unlike subsequent generations, R15 wheels were installed. They are perfect for motorists who love a soft, smooth ride and save money, such "rollers" are cheap and save the suspension.

V30 on huge disks

• 15 - 6.5Jx15 ET50
• 16 - 6.5Jx16 ET50
• 17 - 7.5Jx17 ET45

Diameter of the central hole (DIA) - 60.1mm, fastening to the hub - nut, drilling - 5х114.3, allowable overhang (ET) - from 45 to 50 mm.

Good rims for the V30

• 205/65 R15
• 215/60 R16
• 215/55 R17

The minimum size of rubber that is suitable for the "thirty" is 205/65 R15, the largest is 215/55 R17.

Non-factory wheels for Camry

When purchasing original discs for, you should not worry about whether the new "rollers" will fit the car. The manufacturer took into account all sizes and tolerances, it remains only to buy and change the car's shoes. If you are thinking about buying third-party discs, then carefully read and write down the following information for yourself.

The original design of the wheels of the Exclusive package

Razboltovka - 5x114.3, i.e. the disc is fixed to the hub with five nuts, and the diameter of the circle passing through the centers of the disc mounting holes is 114.3 mm.

Top rubber for Camry

Continental Conti Premium Contact 5 is a rubber with high acoustic comfort, excellent braking and road holding on dry and wet surfaces. Soft, therefore wears out quickly.

Rubber Continental ContiPremiumContact 5

Nokian Nordman SZ is a choice that responds adequately to low for summer tires temperature without losing adhesion properties. They disperse and slow down cars well. The downside is the noise.

Yokohama BluEarth-A AE-50 is the solution when price and reliability are paramount. Good grip with dry and wet asphalt, wear resistant. Noisy, poorly maintained gravel road.

Michelin Energy XM2 is quiet, tough, durable. Excellent performance on asphalt in the rain. It rides badly on wet gravel and grass.

When choosing winter tires, pay attention to the following models.

The Nokian Hakkapeliitta R2 is a good non-studded tire that delivers decent directional stability, cross-country ability on snow-covered areas, good braking on ice. Weak deceleration on asphalt.

Goodyear Ultragrip ice 2 - non-studded rubber. Pros - confident deceleration on ice, cross-country ability on loose snow. The downside is high noise.

The online store "SHINSERVICE" sells wheels for Toyota Camry and many other cars. Our assortment includes the most reliable and modern products from reputable manufacturers. We are absolutely confident in the quality of the products and provide our customers with an extended warranty for all models.

The rim is, in fact, the wheel itself, or rather its base. It is he who accounts for the entire mass of your Toyota Camry or any other car. Needless to say, the choice of this part should be taken seriously.

It is necessary to pick up Toyota wheels Camry, in all respects matching the car of your configuration. Pay attention to characteristics such as:

• product radius;
• drilling;
• rim width;
• departure.

In addition, you need to decide on the material. Most popular alloy wheels for Toyota Camry. They are inexpensive, strong enough and lightweight, and also have an unusual design that will successfully emphasize the individuality of the car.

The best offer from the company "SHINSERVICE"

Our online store sets low prices for all models presented in the catalog. In addition, you can participate in a special promotion or sale, which makes your purchase even more profitable. Delivery in Moscow and the region is absolutely free. Delivery to any other region of the country is also carried out. Detailed information can be obtained from the specialists of SHINSERVICE LLC.