How to paint the steering wheel of the car - we restore the skin with your own hands. How to paint and how to restore the leather steering wheel? Verified Lifehak How to Resturbate Leather Steering

The cabin of your car looks great, but you begin to notice that the paint is getting sunpacing on the steering wheel and unesthetically "propellas" appear? Of course, the skin itself remains in good condition, but paint steering wheel It is urgent. In any car service you will quickly make this work. But it is not necessary to contact the service, because there are quite a large selection of various chemistry in the auto shops to paint leather steering. Moreover, work takes a minimum of time.

1 Preliminary works - what should be done before starting?

To properly choose the paint, you need to decide on the material from which the steering wheel is made. In our case, this is the skin. Selecting the paint, pay attention to its value. Dear more resistant to erasure. By purchasing a tool, apply a bit on any leather object, and you can make sure the product. The paint for the car's wheel is sold in the cans, but you can use a brush or tampon to work. If the surface of the steering wheel has a combination toss, then you need to purchase a soft dye. With chromium tossing, paint can be used with a more hard composition. Working conditions with dye are described on the balloon itself.

The most important thing is: the room temperature should be plus, and the humidity is low.

From permanent contact with hands on the steering wheel, cracks can also be formed, which can also be primed. To do this, you need to purchase a special putty. To the surface of the steering wheel before painting to align, buy sandpaper. We also need a special degreaser to remove stains from oil, fat and sweat hands. Many motorists brilliant glossy coverage do not like too much. So that the surface of the steering wheel after painting has become matte and velvety, take a special matte coating.

The steering wheel before painting is good to remove. But if you have never dismantled it, think, do you cope, because there is a risk of damaging the item. In this case, you can leave everything on the spot, but to purchase a large package for the full closure of the panel and everything that the paint can get, and also buy a greasy tape for pinning cellophane.

2 Prayer steering wheel - how to get an excellent result?

So, proceed to work. First, close the parts that do not need to be restored: the knitting needles on the steering wheel, the control panel, the floor and the seat. Then polished the sandpaper damaged places to provide best clutch Coverage with skin. Then take a more fine-grained abrasive and grind to the matte state. If the cracks are too deep, you need to smear their paste from scratches and cracks.

Degrease the steering wheel with a special cleaning agent for leather products or ordinary White spirit, if there are plastic elements - medical alcohol. Many degreaser are not applied, because The skin at the helm can shrive down and crack even stronger. Wipe the steering wheel with a soft cloth so that there is no dirt and fat.

Color the car's wheel is completely simple: it is easier to spray the paint from the sprayed paint, but it is harder to control its quantity. You can use a sponge or brush, wetting it in the liquid paint. If you are more convenient to apply spray, we applied with cautiously withdrawn movements into several layers. It is not necessary to wait for a complete burnt of the layers. Just continue to apply the next layer. The steering wheel should be painted evenly, and not just strongly saturated with paint. Working with a brush or sponge, you can control the consumption of funds, which will be cheaper.

If the glass still got drops, use the solvent. I do everything quickly, you do not stop in one place. So that the surface is dried, use the hairdryer. We are still a little longer before the final drying and we apply the finish matte coating. It will ensure full fastening of paint on the surface of the steering wheel.

All work on painting the steering wheel can take just a couple of hours. It is advisable to work in a closed room so that the dust does not hit the surface in the surface. Treated steering wheel Leave the clock for ten and within a few days do not wipe with wet fabrics. To paint with your own hands for someone, maybe unusual, but it is much more profitable than to work for a hundred.

3 Care of the wheel - why do you need polyroli?

Subsequent care for the painted steering wheel should not be ignored until the next paint. We regularly use the means for caring for automotive skin or water with a water shampoo. We apply a small amount of means, we are waiting for some time, we wipe the soft cloth. Everything will take no more than 15 minutes.

Often scratches on the steering wheel appear from rings on the fingers of drivers. To keep the steering wheel in good condition, many car owners buy a case. If you do not want to use covers, periodically use silicone polyters, which for applying form a protective film. As soon as you see that shine disappears on the surface of the steering wheel, put the polyrolol.

Put in order the leather steering wheel is quite easy. It all depends on how you are suitable for this case, from choosing materials and quality of work. Let the first time you will be all in a novelty, but with what pride you will say that we updated the steering wheel.

A few years ago, the high-quality painting of the car's steering was considered quite problematic. However, today technologies have emerged, allowing to make this work quickly and efficiently thanks to special techniques and the latest paintwork materials.

The steering wheel can be painted, without even removing it from the car. First you need to leave all the elements that are not subject to painting on the steering wheel, and must be covered with cloth, paper or film torpedo area.

So, what do you need for high-quality painting of the steering wheel? Let's deal with ...

Preparation of the steering wheel to painting

Before painting the steering wheel, it needs to be carefully prepared. From this will depend on it appearance, and he must be flawless. Preparatory operations Performed in the following order:

1. Slap and loss steering places with old paint need to be cleaned by the emery (R-400 or P-500);
2. Gloss is removed (so that the paint is well kept) with a gray scotch-bright or emery (P-1500);
3. Degreasing steering;
4. Application of leather cleaning (sold in canisters);
5. Degreasing and wiping microfiber.

If the old coating becomes bad to succumb to emery processing and remain strong irregularities, then you can scap the steering wheel with a special paste to eliminate cracks, scratches and scuffs, which is available in any automata. Typically, such a paste dries 30 minutes and is preparing with the help of the same sandpaper or scotch-bright. Paint can be chosen by a special catalog in the store.

Actually the process of painting the steering

The restored steering wheel must be covered with paint so that the colors of soft and flexible materials are refreed. To do this, you will need (pulverizer) and compressor. Then you need to cover the steering wheel with a finish matte coating for leather and vinyl. This can be done almost immediately (wet wet). It remains to unpack the steering wheel and ventilate the salon.

On a note

If the paint falls on the glasses, it is easy to remove the 646th solvent. At the same time, it is necessary to be careful that the solvent does not hit the steering wheel, as it hurts fresh paint.

Of course, painting cars with your own hands, including the steering wheel, takes time and some knowledge relating to. However, from a financial point of view, it is much more profitable than the services on a qualified service station, especially if you have the simplest painting gun and compressor.

Restoration of plastic steering wheel

Not all cars are equipped with a steering wheel in a leather shell. In the commercial segment of the steering wheel, most often covered with soft plastic. However, they even wear out and lose the original appearance.

Painting plastic working surface of the steering wheel is easy, but for a long time such cosmetic repair is not enough. Any paint with the active operation of the car will be watched. However, plastic steers are also painted, for example, during pre-sale preparation.

Before painting it is very important to carefully degrease the contact surface of the steering wheel. It always has a lot of fat, because the wheel is kept with palms. Degreasing plastic is best to produce alcohol. Solvents on acetone can eat plastic!

The processing of the steering wheel with alcohol perform at least three times. First dissolves dirt and large fatty baits. All this is cleaned with a cotton swab until he stops dirty. Next, you need to take a pure tampon, moisten it with alcohol and wipe the steering wheel once again, then give plastic to dry and repeat the procedure.

Despite the fact that the plastic is dissolved with acetone, paint in the cans can be searched for painting. But it is necessary to apply it from a long distance and very dosed. In one pass, so many paints are sprayed so that its solvent is evaporated for a few seconds, not the time to affect the polymer. So, having a layer behind the layer, you can paint all scuffs.

It is difficult to say how much the paint will last on the plastic sheath of the steering wheel. Everything will depend on its quality, the number of layers, as well as on the type of plastic. The highest quality painting is made with preliminary stripping small emery. The rough surface of the plastic has better adhesion.

How to deal with wooden linings

On the elite cars Steering wheels can be installed, decorated with elements of natural wood. They wear out infrequently, because they are protected by very high-quality varnish. But if the driver wears the rings on the fingers, then the lacquer can scratch.

A small scratch on the lacquered wood can be tried to refuel. To do this, it is first stuffed with sandpaper, and then, gradually reducing the grain and polishing the paste, the surface is adjusted to the ideal. If the scratch is too deep and is in a prominent place, the steering wheel will require a solid restoration.

Deep scratches on the varnish must be completely stabbed. On the steering wheel, this work can be done manually, but it is easier and faster to grinding a portable borders with a nap of a suitable diameter. For good result It is better to brand the whole element, - then the new varnish will fall perfectly.

For the vanishing of the wooden steering wheel, it is recommended to use high-quality polyurethane varnish. It is the most durable, wear-resistant material with sufficient elasticity. Cheap varnishes are quickly wiping, and they can crack, peel and so on.

Steering wheel

The steering wheel often judges the state of the entire car. The shaft steering wheel with a small mileage of the car causes a suspicion. However, there are several ways to keep a good appearance of the steering wheel.

If the driver carries on the fingers of the ring, then it is better to protect the steering wheel with a leather case. Permanent contact of the helm with metal will necessarily have consequences. The case can always be replaced, with the contact surface of the steering wheel remain untouched.

The steering wheel is the car detail with which the driver contacts most often. Therefore, the coating of the steering wheel is contaminated with the laminate discharge, and also grieves. Many car owners solve this problem simply: cover the skin of the helm with a cover. However, it will be much better to cope with this painting. The surface of the leather steering wheel can be renovated so as to return the coverage of an attractive appearance and protect it from the aggressive effect of environmental factors.

To paint the skin of the steering wheel as much as possible, you will need to purchase either the finished set of funds, or buy separately the compositions for restoring and protecting the leather coating and paint. In this regard, the repair itself takes place in several stages.

Stage First: Preparation of the Working Area

Painting does not require a mandatory dismantling of the steering wheel of the car, as it is extremely difficult to do it. In addition, there is a risk of damaging the mechanism of the steering airbag. It is enough to cover the torpedo with a polyethylene film attached to the greasy tape. The same scotch is protected from paint spokes and buttons on the steering wheel. If you still decided to mask such a laborious process, as disassembling, act in the following sequence:

Steering wheel ready for painting. Click on the photo to enlarge.

• turn off the power, disconnecting the car battery terminals;
• turn the steering wheel to the "right" position;
• using the end key, remove the bolts fixing the side plugs;
• remove the plugs;
• loosen the steering wheel overlay bolts;
• carefully pull the overlay up, then with a screwdriver, disconnect the connectors in which the airbag wires are attached. Do not touch the airbag capsule itself!
• make marks on the wheel itself and on the main shaft, and then using a special tool, remove the nut and remove the steering wheel.

Stage Second: Restoration of the skin on the steering wheel of the car

Before painting the skin, you need to ensure that there are no cracks, dents, scratches and other damage on the steering wheel. We recommend starting from restoring the skin, because if the coating is not too worn, the painting of the steering wheel may not need.

Already shot steering wheel. Click on the photo to enlarge.

Today, in the car cosmetics market, you can find a large number of creams that have a common word in their names - "Restorener". The mechanism of their work is similar to the action of Gutalina, and durability depends on the components included in their composition. Such reducing creams, as a rule, are inexpensive, are convenient to use, after absorbing and drying, do not pack hands and do not flow with increasing temperature.

Another category of "cosmetics" for a leather steering is protective funds in the form of creams and impregnation. Their main function is the removal of existing passagon contaminants from the coating and further protection against the rapid formation of new ones.

So, the preparation for painting is beginning with the fact that we carefully squeak the coating of the sternum P400 - P600. This will help increase the adhesion of the new paint with the skin, as well as get rid of the old paint, especially the one that is peeling. When the old paint coating is removed from the skin of the steering wheel, it is possible to walk on it with a softer skin: gray "scotch-bright" or a squeak of P1000 - P1200.

Inspection of peeled and polished leather will help identify the presence of such damage as scratches, cracks and other irregularities. You can close them in several ways:

1. align: to handle the skin with special air conditioning and polyrolla;
2. slopat the "liquid skin" and after drying to the skin of the eye;
3. use folk remedies: Wax for shoes, nail polish, etc.

Stage Three: Painting

Immediately before painting the skin on the steering wheel should be degreed. Ideally, a cleaner for the skin should be used, but the usual "White Spirit" is suitable. It is necessary to take into account the fact that the skin after squeaking the sandpaper easily absorbs such compositions, so the chopper from the microfiber, which you will wipe the steering wheel, wetting only slightly.

Selection of paint

How to paint the skin depends on its quality. A leather steering wheel with vegetable or combined tack requires the use of soft paints in large quantities, as such skin has high absorption. The leather with chrome oak is characterized by smaller absorption, which means it requires less paint and well feels under the coating of rigid and even aggressive compositions.

Painting process

Manufacturers of paints for leather recommend dipping the product to the whole and withstand 3-15 seconds for impregnation. In the case of the steering wheel, it is almost impossible to do it. The fastest and easiest way to put paint on the skin of the car is to spray it from the canister. But if you are a very economical car owner, you can use the foam roller or tassel. Painting is carried out in several layers, and wait until each layer dry does not need. The process of applying paint "Wet" allows you to control the level of its absorption of the skin. Optionally, you can use a special coating for vinyl and skin with a matte effect.

After completing the paint paint paint, which fell on the glass or dashboard The car is removed using solvent No. 646.

Restoration of the car's steering is often simply necessary procedure. This is due to the fact that with constant contact of the driver with this part, the coating of the steering wheel is wear out, scratches appear, stains and scuffs, all this makes the ride process less comfortable, and significantly spoil the appearance of the car's salon. To solve this problem, drivers use four approaches:

• purchase new Detail And installing it in place old. Very expensive event, and often it is not at all acquitted waste of money, especially if the steering wheel works properly.
• appeal for help in the car repair shop. In this case, in addition to themselves supplies You still pay a solid amount for the provision of services.
• wear on the steering wheel. A good budget option, but many drivers do not like that the coverage thickness increases and control becomes less comfortable.
• painting the car's wheel with your own hands, for example in the garage. This is a budget decision, it will be necessary to buy materials to restore the coating and spend a few hours of their time. In fact, in the whole procedure there is nothing complicated in the whole procedure, and you will be quite able to cope with this task.

How to choose paint and consumables?

If you decide to restore the steering yourself, you will need materials to restore and paint this detail. It is important to understand that the choice will depend on the budget that you are willing to spend on this procedure. For example, there are both "folk" options for paints and professional solutions. Most. simple option Painting precisely the leather steering wheel is the most ordinary skin reducing agent, which can be bought almost in any auto store. But the main disadvantage of this tool is a briefness. Layer of such a coating at intensive operation vehicle Quickly erases, and if you bought a budget version of the reducing agent, then you are not insured and from traces of paint on your hands, which is also an unpleasant moment.

Another budget decision is the applying of creams for the skin that are sold for painting jackets and shoes. These funds do not relate to the class of car cosmetics, so they will also quickly wear, and can leave traces in their hands. Here you will turn on and nail polishes that you can cut scratches and chips on the steering wheel.

The best solution will be the selection of precisely professional paint for painting the steering wheel, as well as regenerative means. These include liquid skin, with which they restore various mechanical damage and complete wear of the coating on the steering wheel, paint for automotive skin, air conditioners that smooth out the material and polyteroli to eliminate scratches and irregularities on the surface of the part. There are also means for removing fat spots from the skin, which, in any case, are formed during contact with the coating.

If you want to get a matte type of steering at the output, then for the finishing layer, paint uses special matte covers that eliminate gloss.

When choosing paint, repel from the skin type on the steering wheel. With a vegetable or combined tossing of the skin, paints with a soft composition are used, with chromium tacking, the solid and dense compositions of the materials applied are used.

Here is a list of materials that will be needed for work:

• malar tape and protective film.
• absorbent to remove replace stains.
• grinding paper.
• degreaser.
• liquid skin.
• paint for automotive skin.
• scotch-Bright.

Also on the market there are ready-made sets for painting the steering wheel, which can be bought on auto markets.

Prepare the surface

If you are not an experienced master, then we do not recommend it yourself to remove the steering wheel, as you can damage the wiring or fastening, which will require additional financial investments. It is better to work carefully right in the cabin, but at the same time preliminarily prepared the working area. To do this, with the help of painting tape and films, you get all the nearest surfaces, this is the instrument panel, and windshield and buttons on the steering wheel, etc. We only leave that part of the steering wheel, which we will paint.

Before painting the skin on the steering wheel, it is necessary to carry out restoration work, and this technology consists of several basic steps.

1. Grinding. Using emery paper, the P400 - P600 brand is grinding the surface and remove all small scratches and chips. If there are a lot of such damage, then we clean the steering wheel completely.
2. Now we take the paper of the brand P1000 - P1500 and completely mature the surface to increase the surface adhesion with appliant materials. Also for this task you can use scotch-bright.
3. If fat stains are present on the steering wheel, they can be removed using the absorbent.
4. Now restore the leather coating with liquid skin. It is applied to damaged areas, waiting for drying and then grind fine-grained emery paper before receiving a homogeneous surface. Also, in addition to liquid skin, putty pastes are used, after which they are also grinding.
5. All wrinkled areas of leather are treated with air conditioning and polyrolla.
6. Detail degreasing.

When degreasing the coating, it is important not to take a lot of material, as the skin can freeze. It is important to apply a degreasing agent and immediately begin to apply paint, do not wait for the surface to dry.

Apply paint

The technology of painting the leather car steering wheel can be in two formats:

1. Using an aerosol spray. But in this case, it will be necessary to take almost the entire salon to cover the film so that it does not get paint anywhere, and I needed for a long time and you need to rub it away with a solvent.
2. Use brushes and paint with cans. In this case, it will be more comfortable to work, besides, you can fully control the consumption of the material.

They put paint on the steering wheel in several layers and at the same time there are no complete drying between them, and the material "in wet" is applied. The whole process of painting will take about 30 minutes. You can use the means to give a matte effect as the finishing layer if the gloss is not satisfied with you.

What about plastic and wooden inserts on the steering wheel?

If your car is plastic steering wheel, then the approach is similar, but there are several differences. This is primarily the preparation for painting the steering wheel. You will also need to sand the surface using sandpaper, and degrease it, but for degreasing, either antisilicone, or alcohol, and in no case are not acetone, it corps this material.

Paint paint on plastic in several layers, then a matte coating is often applied. But when repairing this type of steering wheel, the LCP does not hold for a long time and with intensive operation of the car, it starts to lose appearance and collapse. Here the outlet can be a good leather case.

If we talk about wooden inserts, then they usually serve well, but there are minor scratches from rings or other mechanical damage. You can eliminate them with polishing, and deeper scratches can be carefully filled with a transparent nail polish.

Cargo care

It is important not only to restore the coating on the steering wheel, but also to carefully care for this item, then she will serve you for a long time and will delight with its appearance. First of all, you need to constantly wipe the steering wheel and hands with napkins to avoid the formation of oily spots, which will then be difficult to withdraw. The second is the use of car care products, or just breed detergent For body in water and wipe the coating rag. For this, regenerating funds are applied to the steering wheel, waiting 10 - 15 minutes and then climb them with a cloth. Such an approach will provide a longer service life of the steering.

Every day, during the control of the car, the driver contacts the steering wheel. And no matter how high-quality skin on it, over time she grieves. It is also contaminated by the fat possessions of the hands. Every owner of the car has faced the problem of worn coverage, which rises on it for more than three years and which is not at all the appearance of the steering wheel is not at all. Most drivers solve the problem of skinned skin with a drying. But it is worth this procedure very expensive. Painting the steering wheel is a cheaper and no less efficient way of restoration of the coating.

Materials for painting

First of all, it is necessary to determine which material must be renovated. After all, the steering wheel can be not only leather, but also plastic or with wooden inserts. Selection of suitable paint depends on the material.

It is much easier to carry out restoration procedures with the car's wheel when it is removed. But sometimes the dismantling process is more laborious than restoration work. Therefore, it will not be superfluous to turn scotch tape, film, newspapers, painting ribbon.

Selecting the appropriate paint, it is necessary to take into account that its cost is directly related to abrasion resistance. Since the steering wheel is used very actively and this resistance to abrasion is very important, experts recommend not to save. Painting the steering wheel using modern materials can be carried out using an aerosol canister or tampon.

About leather materials

In any car stores, there are various cosmetic materials for the skin on sale, on the label of which it will be indicated that the tool also has a reducing effect. Will this paint be durable? It all depends on the quality of the components that are part of. The principle of operation of the dye is about the same as the action of Gutalina.

But along with these means there are better skin products. These are protective impregnations and creams. So, these tools are capable of bringing already formed fatty pollution, and also prevent the emergence of new ones. For smoothing scratches and cracks, special polyters or air conditioners for leather products should be applied. Liquid leather is used for the same purposes. You can also use shoe wax or nail polish.

When selecting skin paints, it should be repeated from the quality of materials. For example, if the car has a steering wheel with a combined or vegetable oak, then for such a coating it is necessary to purchase soft staining materials. All because such skin has higher absorption. If the chromova tossing, then the absorption is significantly lower. This means that the painting of the steering wheel can be performed with more rigid dyes.

Required chemistry set

For restoration work, not only the dye will need. Professionals in workshops for different stages of preparation and painting use a whole set of modern auto chemical products.

A special degreaser is required. It is especially effective for the initial removal of oily spots, as well as other contaminants on the skin. The skin cleaner is also needed, plastic and vinyl surfaces. The set for painting the steering wheel includes a special absorbent agent. It is intended to remove deep spots from sweat, oil and fat on the leather surface. It will not be superfluous to purchase a tube of liquid skin.

What means to choose? For staining, it is recommended to use the paint for the skin and vinyl water based. It is able to restore the hue qualitatively. For skin and vinyl, it is also recommended to use a matte finish coating. The "stapler" means will provide maximum resistance to abrasion using a special protective layer.

Independent painting of the car steering wheel does not have to pass using all these funds. Expensive products can be replaced by more accessible counterparts that have already been applied.

Along with independent painting, such a service is available as a professional steering wheel restoration. In many tuning ateliers, painting the steering wheel. Reviews of work very positive. The surface is not erased at least 150 thousand kilometers. However, the budget of these work is not compared with those that are produced independently.

Preparatory work

The first thing is placed by the film dashboard so as not to stain it. Film or other protective material is best fixed using the latter will also help protect the steering wheels and buttons.

If it is decided to dismantle the element so that the painting of the steering wheel is performed outside the car, then you need to understand: there is a certain risk to damage the steering mechanism if the dismantling procedure has not been performed. Painted steering wheel comfortable. But you can do and the film.

Next you need to remove from the surface all scratches, cracks, dents and other defects formed during operation. Why is it worth starting with this? Because in some cases you can do without painting, if the skin is not old on the steering wheel and not erased. After removal of all defects, it will be possible to estimate, you need capital restoration work or problems will solve a simple hauling of the steering wheel.

Grinding

To remove all damage, it is necessary to carefully pass the leather surface.

It is best to do with the help of sandpaper. Select the agent with the graininess of the P400-P600. This procedure will help, among other things, also remove the old paint and improve the adhesion of the new on the surface. After processing, you take a soft material for polishing. The so-called scotch-bright or emery with the grain grain of P1000-P1200 is suitable.

Degreasing

Next, the skin must be carefully deguted to paint the steering wheel of the car. It turned out as high quality and smooth. It is recommended to purchase special cleaners for leather products. But if the budget is limited, then the usual White Spirit is suitable.

Remember that the skin perfectly absorbs these degrees. Therefore, for processing it is necessary to use a rag, slightly moistened in the liquid. One of the mistakes - car enthusiasts try to carefully apply White Spirit. As a result, the skin will be cursed and wrinkled.

Process of coloring

The easiest option is when the paint for painting the car's steering wheel will be applied from the aerosol can. In the process of work, it is important to ensure that the dye sprayed evenly and on not too close distances. After the composition is dry, the entire surface should be polished.

The procedure is repeated several times until the desired result is reached. Painting from the spray is simple. But there are other ways. In the same way, painting the emblem on the steering wheel.

We restore the leather steering wheel

For skin there is a wide selection of various dyes that allow you to improve the color, as well as restore the material. Dyes in such means are distinguished by a more resistant effect.

Drive material by any skin paints. Naturally, the instructions write, as best to carry out staining. You can apply the composition with the help of a brush, swab or a sponge, layer behind the layer (without waiting for the previous one). The surface must be evenly treated with a dye. To speed up the drying process, experts recommend using a hairdryer. After the paint is completely dried, the surface should be treated with a fixer. It can be both matte and glossy.

Restoration of plastic elements

Recently, many plastic parts can be observed on the rugs. Over time, they also lose their kind. You can paint such a steering wheel, but the color will be quickly wound. In order for the coating better to put on the surface, the surface of the sandpaper should be treated. Before painting, it is recommended to carefully degrease the steering wheel. But not White Spirit, but by ordinary medical alcohol. It is best to paint from the canopy with thin layers.

But it is best to use another restoration method in this case - this is a hauling of the steering wheel. In the case of plastic, the situation will solve the installation of a good leather braid.