Connection diagram xenon headlights. Proper installation of xenon lamps

More and more modern automotive accessories become available for a wide range of motorists. Among them, a special niche occupies a new head light engineering. Now you can install practically any headlights (lamps) that are used on the most recent car models - xenon, bixenon, etc. Consider how you can connect xenon on your car.

Advantages of xenon lamps

Xenon lamps give light, the spectrum of which is as close as possible to daylight. At the same time at the expense of a number constructive features Such lamps have an advantage in relation to halogen and conventional lamps with the filament of the heat, according to the power of light, and, accordingly, by the range of lighting.

In addition, the light beam emitted by xenon lamps has a good focus, which makes it possible to use the maximum light ahead of the car, and not dispel it around the road. By the way, this factor greatly facilitates the life of the driver of the oncoming transport, since properly adjusted headlights will not be loosened due to the directional beam of the focused glow.

Kit for installing xenon lamps

Unlike conventional headlight lamps xenon lamps are sold complete with additional equipment. This kit includes the lamp themselves directly - 2 pcs., Corrosion blocks - 2 pcs., And a set of switching wires.

Connection diagram of xenon lamps by car

Regardless of the manufacturer, most xenon lamps are installed according to a typical scheme. But for loyalty, most manufacturers complete with lamps offer the buyer instruction in which there is a xenon connection scheme. Consider model schemaThat is suitable for any car. First you need to install the ignition unit. After that, perform the installation of the wiring. When installing the ignition unit, select such a place that the wires were connected to it without tension. It is also desirable that the place of installation is not subject to severe pollution, heat heating, or moisture from the outside. Block is mounted using special fixtures on its housing and self-tapping screws. It must be rigidly fixed. After that, also fix the harness with the wires.

After that, it is necessary to replace the lamps in the headlights for new xenon. Most xenon lamps are performed by standard dimensions Under typical fasteners. Although there are exceptions if you have this option, then you need to either change the fastening of the headlight or come up with an adapter for installation. Depending on the headlight configuration, sometimes there is a need to drill small holes under the casing. In addition, it is recommended to install a sealing gum in the posterior head of the headlight to prevent moisture from entering the inside of the flask.

After that, it is necessary to fix the headlights. Immediately before installing, it is recommended to degrease the bulbs with alcohol and soft tissue. Unlock all wires according to the connection scheme. Do not forget that the connection of xenon through the relay is performed according to the scheme necessarily, since the xenon lamps use the high value voltage and high frequency. The electric circuit of the car does not allow directly powering the lamps.

Precautions when installing xenon

Little to know how to connect xenon, another number of nuances should be remembered, which affect the efficiency of head lighting in general. If it is damaged on the details of the set of xenon lamps, refer to the seller or to a service center for replacing them. It is prohibited to touch xenon lamps or ignition block with hands with polluted butter, or wet hands. You can not watch for a long time on working xenon lamps without protective glasses. All posting connections must be securely isolate. Do not touch K. high-voltage wires and flasks during the operation of xenon lamps.

Video - installation of xenon

CONCLUSION!

If, when working with head light, xenon lamps went out, the probable cause is the triggering of protection in the ignition unit.

• news
• Workshop

In Russia, the demand for Maybahi sharply increased

Russia continues to grow sales of new luxury cars. According to the results of the study conducted by the Avtostat Agency, at the end of the seven months of 2016, the market of such cars amounted to 787 units, which is 22.6% more than in the same period last year (642 pcs.). The leader of this market is the Mercedes-Maybach S-class: on this ...

Citroen prepares suspension type carpet aircraft

In the Citroen brand represented by the concept of Advanced Comfort Lab, built on the basis of the C4 C4 Cactus serial crossover, the most prominent eye of the innovation are, of course, chubby armchairs, more similar to home furniture than car seats. The secret of the chairs - in a package of several layers of viscoelastic polyurethane foam, which usually use manufacturers ...

Dakar-2017 may pass without a KAMAZ master team

The Russian team "KAMAZ-MASTER" is currently one of the most powerful rally-raid teams of the planet: From 2013 to 2015, blue-white trucks took gold Marathon "Dakar" three times, and this year the crew under the leadership of Airat Mareev became the second. However, according to the Agency TASS, the director of NP KAMAZ-Motorsport Vladimir ...

New sedan Kia will be called Stinger

Five years ago at the Frankfurt Motor Show Kia introduced conceptual sedan Kia. GT. True, the Koreans themselves called him a four-door sports accumulation and hinted that this car would be able to become more affordable alternative Mercedes-Benz CLS and Audi A7. And now, five years later, the concept car Kia GT was transformed into Kia Stinger. Judging by the photo ...

Video of the day: Electric car is gaining 100 km / h in 1.5 seconds

An electric car called Grimsel was able to accelerate up to 100 km / h per 1.513 seconds. The achievement was recorded on the runway of the aviation base in Dowendorf. The Grimsel car is an experimental car developed by students of the Swiss Higher Technical School of Zurich and University of Applied Sciences of Lucerne. The car is created to participate ...

OSAGO liberalization: Decision Delayed

As the deputy chairman of the Central Bank Vladimir Cheryukhin explained, it is impossible to move in this direction, since the decision of others is first important problems Insurance industry, TASS reports. Briefly Recall: the preparation of the "roadmap" on the liberalization of tariffs of the CTP initiated in November 2015. It was assumed that the first stage on this path should be ...

Photo of the day: Giant duck against drivers

The path to motorists on one of the local highway blocking ... a huge rubber duck! Photos of duck instantly went through social networks, where they had a lot of fans. According to The Daily Mail, a gigantic rubber duck belonged to one of the local car dealers. Apparently, on the road an inflatable figure demolished ...

Magadan-Lisbon mileage: there is a world record

They drove through the whole of Eurasia from Magadan to Lisbon for 6 days 9 hours 38 minutes and 12 seconds. This mileage was organized not only for forns and seconds. He carried the cultural, charitable and even, can be said, a scientific mission. First, 10 euro scenes from each kilometer passed was transferred in favor of the organization ...

In St. Petersburg, a car was cooked without an engine and roof

According to the publication "Fontanka.ru", a businessman turned to the police, who said that from the courtyard of his house on Energy Avenue, the green gas M-20 "Victory" was kidnapped, which was released back in 1957 and had Soviet numbers. According to the victim, the car did not have a motor with a roof at all and was intended for restoration. Who took the car ...

Suzuki SX4 survived restyling (photo)

From now on, in Europe, the car is determined only with turbocharged engines: gasoline liter (112 hp) and 1,4-liter (140 hp) by aggregates, as well as 1,6-liter turbodiesel, developing 120 horse power. Before modernization, the car was also offered with a 1.6-liter 120-strong atmospheric gasoline engineHowever, in Russia this unit will be saved. In addition, after ...

They can be treated as you like - admire, hate, admire, experience disgust, but they will not leave anyone indifferent. Some of them are simply a monument of human media, made of gold and rubies in full size, the part is so exclusive that when ...

What car is the most expensive jeep in the world

All world cars can be divided into categories in which there will be an indispensable leader. So you can highlight the fastest, powerful, economical car. There is a huge number of similar classifications, but one always enjoys a special interest - the most expensive car in the world. In this article...

The best gifts of the car owner

The motorist is a man who has a lot of time to carry out the wheel of his car. After all, in order to provide the desired comfort in the car, as well as the safety of motion, you need to make a lot of effort when caring for cars. If you want to make a nice friend ...

How to exchange your car to a new one, how to exchange the car.

Tip 1: How to exchange your car for a new dream of many motorists - come to the salon on the old car, and go to the new! Dreams become a jaw. Everything more turns Visits the exchange service of an old car to the new - Trade in. You do not...

What sedan choose: Almera, Polo Sedan. or Solaris

In his myths, the ancient Greeks talked about the creature, having a head of a lion, a goat torso and a snake instead of a tail. "The winged chimera was born with tiny creature. At the same time, she glittered the beauty of Argus and terrified the deformity of satire. It was a monster of monsters. " The word ...

What you need to know to take a car on credit?, How long to take a car on credit.

What you need to know to take a car on credit? Buying a car, and especially at the expense of credit funds, is far from the cheapest pleasure. In addition to the principal amount of the loan, reaching a few hundred thousand rubles, it is necessary to pay interest banks, and considerable. In the list ...

What car buy a newcomer to buy a car.

What car buy newcomer when the long-awaited driver's license Finally obtained, the most pleasant and exciting moment comes - buying a car. Auto industry in need offers buyers the most trusted new items and a non-explosive driver is very difficult to make right choice. But often it is from the first ...

How to choose a car for rent, choose a car for rent.

How to choose a car rental car rental - a very demanded service. In it often need people who came to another city in cases without a personal car; Those who wish to make a favorable impression with the help of an expensive car, etc. And, of course, a rare wedding ...

How to choose your first car, choose the first car.

How to choose your first car Buying a car is a great event for the future owner. But usually the purchase is preceded by at least a pair of months of choosing a car. Now the car market is filled with many grades, in which the ordinary consumer is quite difficult to navigate. ...

Reliability is definitely the most popular requirement for the car. Design, tuning, any "beams" - all these trendy tricks in the extent of their importance inevitably blurred when it comes to reliability vehicle. The car must serve to its owner, and not to deliver him the problems with his ...

• Discussion
• In contact with

Xenon is an inert gas that, when contacting electric shock, begins brightly glows. Xenon lamps are much better than halogen, as they have a number of advantages. They emit light very similar on daylight, so the driver's eyes are not so much tested with long trips, even if you install xenon into distant light. Also xenon lamps significantly reduce the load on the car generator and are not broken by shocked. Independent installation Xenona is a lung enough and any owner of the car can cope with it.

Types of xenon

From such a parameter, as temperature, it depends on what brightness and color shade will be a lamp. The color gamma xenon varies from yellow to violet shades. The temperature is measured in the degrees of Kelvin. More saturated colors rarely use motorists, most often installed white xenon, it looks more like day lighting. The yellow headlights will be at the mark of 4050 K. And the white color is equal to the value of 5000 K. The blue shade is obtained at 6000 K, and purple - at 18000 K.

Also xenon lamps are different in size. To properly select the lamp of the size for the size headlight, you should take the old for comparison.
The durability of the lighting elements is quite high, so the replacement of xenon lamps will be carried out very rarely.

Also, each motorist needs to know that there is an on sale pseudocsenon. It has no relation to xenon lamps. These are ordinary halogen lamps, tinted in a blue color with a higher power. So when buying xenon, you need to be very attentive.

Installing xenon

After the appropriate kit in the store was bought, you can go to the beginning of the installation of xenon. Make it very simple and with your own hands without resorting to help masters. For near I. far Light There are two different sets. In the standard set for installing xenon there are two lamps, two ignition blocks and wires. Connecting xenon without a ignition unit is impossible, only it can apply the required voltage, namely in 25000 V. But this voltage indicator is necessary only for ignition, after that it will be enough to maintain only 80 V for normal operation of the lamps.

See also: Installation of electric booth on UAZ

Now let's get to the installation. To begin with, lift the hood cover and unscrew the headlights. After that, get old lamps. They can be installed on the spring, which can be observed in certain types of cars. So, new lamps should also be installed on this spring. The main thing is, before mounting xenon lamps, in no case touch it with your hands. If no longer happened without touch, then the surface of the alcohol should be degreed. Next, the installation must be made according to the scheme.

Xenon Connection Scheme clearly shows the right move actions. It is impossible to be mistaken in it, it is very simple.

1. Install the xenon lamp. If the base is not suitable, then you can use special adapters, they sometimes go to the xenon set. If not in the set, you will have to buy separately.

2. After installing the lamp we press rubber band.

3. Through the rubber plug, remove the wires to the ignition unit. It will be necessary to install not far from the headlights, because the wire is not very long. But the selected place must necessarily be dry, otherwise the block will stop functioning. It can be attached to the hood with the help of the scotch. To save the ignition unit from humidity, it is also possible to wind it with an insulating ribbon.

4. Then the wires running from the xenon lamp, fastened to a regular connector of near or far light. Installing Xenon to Far Light and in Middle - These are two different operations involving the purchase of two sets. But the installation scheme will be the same. You can even optimize all the wires with an insulating ribbon for greater reliability.

All is ready! Now you can check the positive properties of xenon lamps and enjoy excellent driving.

READ ALSO: Tuning Oka

Biksenon

In order not to install two different kits of xenon for neighboring and far light, you can simply buy and connect Bixenon.
Bixenon lamps have the same principle of operation with inert gas, only they are equipped with an additional electromagnet. It is he who allows you to switch the headlights to the close and far light.

Installing Biksenon has some nuances. Consider in detail the connection process.

1. The wires from the bekenon lamps are summing up to the ignition unit.

2. Connect the wire controller to the same block. It is engaged in stabilization of voltage in all wiring.

3. On the bi-xenon lamp there is an additional wire that is responsible for the electromagnet. It should also be connected to the controller.

4. Controller connect to the battery.

Xenon in fog lights

Of course, best option for fog lights Sensing xenon. It will be perfectly cope with the task and besides much better than ordinary lamps. They will illuminate the road, and not flying droplets towards the car.

When installing, you must follow the following actions:

• Remove bumper
• Turn off from headlights
• Connect new lamps
• Connect xenon lamps to the ignition and power unit
• Placing ignition blocks
• Check the work of foglights

Security rules when connecting xenon

How to install xenon was correctly described earlier, but there was no word about the safety measures. It should be fixed.

We list the basic safety rules:

• When measuring the details of the xenon set, immediately stop the installation
• Do not work with wet
• Do not look for a long time to look at the last minute xenon lamps without darkened glasses.
• Electric wires must be isolated
• Adjusting headlamps must be performed by a special device.

Helpful advice: It is also necessary to know that the shade of the color of xenon lamps may differ slightly from each other. This is a normal phenomenon for xenon.

Advantages of xenon lamps

It is better to buy xenon's branded kits, should not save on improving own car. We list the main advantages of good xenon.

And if more specifically, then how to install xenon on the Vaz 2110 do it yourself. The execution of this work in principle does not require any prominent knowledge, the main thing to have a desire, straight hands, and free time.

A few words about what xenon is and "with what they eat."

The xenon lamp was created by the German company OSRAM in the 1940s and is presented for everyone to review in 1951. Xenon became very popular and found widespread use in auto and film industry, he managed to send coal arc lamps to a well-deserved rest. Characteristic feature Xenon lamps - bright almost white light with a bluish tint. Almost all modern film projectors, both film and digital, are equipped with xenon lamps, the power of which varies from 900 W to 12 kW.

The principle of operation of the xenon lamp.

The main flow of light radiates the plasma directly near the cathode, while the luminous area has a cone-shaped shape, and the intensity of the glow falls as it removes from the cathode by exponential. The luminous spectrum of xenon lamps is very close to daylight.

Now in order how to install

First of all, you need to disassemble the headlight how to do this:

1. First of all, remove the "minus" terminal with the battery.
2. Disconnect electrical champions blocks.
3. Using the key, unscrew the two fastener mounting bolts of the block headlight.

1. Next, remove the radiator grille and unscrew the bolt of the lower mount.
2. Using a screwdriver, carefully pry the decorative lining.
3. Slide the lining to the center, then pull it out.
4. Unscrew the fastening nut, which block headlights is attached to the bracket for this, use the head to "10".
5. Remove the block fair.
6. A screwdriver neatly sweat the lock of the hydrocorographic cylinder, then turn and remove the headlight housing.

10. Remove the rotation pointer, for this, unscrew the two mounting screws.

11. Remove the halogen or that you have installed and proceed to the second stage - the installation of xenon lamps.

Before installing xenon, I had to buy 4 mothers (2 simple fastening, and 2 with fastening under the thick wire)

So proceed.

1. Remove the "halogenka".

2. Take the knife and cut the yellow, and brown wires. Yellow - "+", but brown - "-", respectively. Using pliers and knife. Clean the wires.

3. Take the clamp or thin Pliers "Mother" for a wide wire and two brown wires to degenerate and exhibit everything with a tape.

4. Do all the same in relation to yellow wires, only in this case use "Mother" for a conventional thin wire.

5. All as it should be isolated in order to avoid closure.

6. The xenon lamp stains in the headlights of Kirzhach without any problems if you have been installed Bosh headlights, you will have to work a round file. With it, it is necessary to expand the hole. Only do not get drunk, from time to time try the lamp.

5. Using a drill and a thin drill, make a hole in the hardening cover of approximately 23mm in diameter, then stretch the wiring from the lamp.

6. Install the lamp itself into the base through the hole and secure.

7. After that, connect the "Moms", it is important not to confuse "+" and "-".

Carefully check if everything is done correctly and connected, remember that the error can cost you dearly, from the wrong connection you can output xenon lamps or ignition blocks.

9. Next, connect the headlight and connect the minus terminal back to.

Responsible moment ... Turn on the Middle Light, if you see a wonderful bright glow - it means the installation of xenon was successful!

Now it remains to collect everything in the reverse order.
To do this, turn off the minus battery wire and install the headlight to the place. The ignition blocks can be glued to double-sided adhesive tape, but I would recommend to make some fastening or come up with something more serious ... It is very important that the place for blocks was dry.

Attention! After xenon headlights are installed necessarily adjust the xenon headlights. Incorrectly configured xenon lamps can blind other participants in motion and cause big trouble.

On this my story about how to install xenon on the VAZ 2110 do it yourself It is over, I hope you all turned out and you also became the happy owner of xenon headlights.

Before telling how to put xenon on the VAZ 2110, I would like to immediately note that there is nothing supernatural in doing this work: no special education or electrician skills, you need only some time and basic idea of \u200b\u200bxenon lamps. By the way, about tuning VAZ 2110.

Vase car owners who decided to establish to the xenon car, most likely, have already studied all the positive and negative parties, as well as the principle of work, so we will not stop at this, but we will turn right to work on the installation of xenon to the VAZ 2110.

Disband headlights.

In order to get to the lamp, you need to start to get off and disassemble the spotlight itself. This is done in the following way:

• the first thing is de-energized a car, for this, a "minus" terminal is removed from the battery;
• next, you need to turn off all the running electrical discs on the block headlights;
• then, with the help of the key, two upper fastening bolts block headlights are unscrewed;
• and the attachment bolts from below are dismantled in the same way - after removing the radiator grille, of course;
• when all the bolts are unscrewed, a decorative pad is raised using a screwdriver: first shifts a little to the center, and then completely pulled out;
• unscrew the fastening nut (for this you need the head to 10 "), which fastens the block head to the bracket;
• after the work done, the block headlight go;
• now the hydrocor-correlated cylinder is removed, after which the headlight itself gets out of the housing;
• further by reloading the mounting bolts, you should remove the rotation pointer;
• do all the above-described actions with the second header.

When both headlights are disassembled, you can proceed to the next phase - direct installation of xenon on the VAZ 2110.

Installation of xenon.

Before proceeding with the main work, you will need to purchase four "mothers": two of them must have a normal mount, and the remaining two are fasteners for a thick cord. Only after all bought, you can start a step-by-step installation.

1. At the first stage, two wires are cut with a knife - yellow and brown flowers. Brown wire is "minus", and yellow, respectively, is "plus". After everything happened, read them.
2. With the help of a round-header or clamp, eat two wires purchased in advance "Mom" brown color, And after for security purposes, isolate them with a tape.
3. Spend exactly the same action with wires. yellow color, Only here you already need to use the "mammy" for a thin cord. And do not regret the isolate, because if there is a closure, serious problems will arise, and you need them?!
4. The xenon lamps in the headlight should be installed without problems and complications - freely, however, only if they are not from the BOSH manufacturer - they will have to tinker with them: manually, with a round file, you will need to increase the hole for the lamp input. The main thing is not to overdo it, otherwise you will have to upload or increase everything back.
5. Using a drill, drill in the protective cover a 23 mm hole, after which stretch into it the wiring from the lamp.
6. Insert the lamp through the entrance hole in the base and secure.
7. At the next stage - the compounds "Mommy" - you need to be extremely careful. By connecting, do not confuse "minus" with a "plus"! This error may fail the xenon lamp itself or its ignition unit.
8. Connect the ignition unit. During this procedure, it is better to be guided by a scheme that comes with xenon. The scheme is drawn available, so it is practically impossible to make a mistake here.
9. The final stage is the connection of the headlight and the connection "minus".

After the assembly of both headlights is produced, check yourself, turning on the Middle Light. If the glow is bright blue, then the xenon installation on the VAZ 2110 was made correctly, and the new optics is ready to work.

Xenon Installation Video on VAZ 2110

Consider how to install xenon lamps so as not to make drivers of counter cars. Correctly install xenon, with their own hands, can even be a novice driver, but it is important to understand the specifics of gas-discharge lamps.

How not to lose right

There is no direct ban on the use of xenon lamps, but for the unauthorized installation of the driver can deprive rights for a period of time - from six months to a year. Employees of the traffic police refer to Art. 12.5 Part 3 Administrative Code, which establishes such a measure of punishment if light instruments are installed on the car, the mode and the color of the glow of which do not correspond to the mounted tolerances to the operation of the vehicle. Also, the reason for the preventive measure is the list of faults of external lighting devices, under which the further operation of the vehicle is prohibited. The prohibition comes into force in the following cases:

• inconsistency of the light flow adjustment to the requirements of the GOST;
• the diffusers and lamps do not correspond to the type of light instrument;
• the inconsistency of the modes of operation and type of lamps provided by the manufacturer of the TC design of the lighting appliances.

To reduce the risk of deprivation of Wu, the following conditions must be observed:

• reflector and glass headlamps should be designed to install xenon lamps;
• the presence of an autocorrector adjusting the light beam depending on the position of the car body;
• headlights must be equipped with a washer.

Consider how to install gas-discharge lamps so as not to create interference with the oncoming transport and count on the loyalty of traffic police officers. For legalization, you need to get permission to re-equipment, and then legitimize the changes made to the design.

Farm marking

The possibility of installing xenon lamps is determined by the manufacturer of lighting devices. You can learn to the tolerances using labeling.

• DC / DR - headlights with separate lamps for the near and long-range mode. For both are the installation of xenon lamps.
• DCR - dual-mode headlamp (one light bulb). Installation of the gas-discharge lamp is permissible.
• DC / HR - xenon can only be installed for low headlights.
• HC / HR or HCR - only halogen lamps.
• CR - headlights with incandescent lamps.

The marking is applied directly on the glass or the headlight housing.

Set of standard xenon

Many auto models are equipped with xenon only in expensive equipment. Therefore, to install it is enough to buy headlights, lamps and a device for automatic adjustment of the light beam. Since the cost of these parts is rather big, the headlight washer system can be built with your own hands.

• We will need a used washer tank windshield, suitable motor, tube.
• The injectors of the washer (suitable with any car) are mounted in the bumper, the device is powered through the fuse. Power management must be displayed on a separate button in the cabin. You can connect to a complete washer, then the headlights will be washed together with the windshield. But in this case, the flow rate of the washer will increase significantly.

After installing the headlamp kit must be adjusted in the certified center (you can on the dealer station). A copy of the order-outfit adjustment is better constantly stored in the car.

In some auto, the staff xenon is not equipped with washes and autocorrect. Sale and operation of such TCs is permitted by the provisions of the rules of EXP No. 48. The essence of the decision is that the washer and the automatic corrector should be equipped with the headlights of the near light with a light source or a LED module that creates (s) the nominal light stream of more than 2000 lumens. Therefore, you can install xenon to the Middle Light, using regular light bulbs and replacing only the necessary items.

Rework headlights under xenon

If the cost standard set It seems to you too unreasonable, you can collect xenon from individual components. On the car, in which the same light bulb is responsible for the neighbor, the same light, the D2S xenon lamps can be used in the opposite and D2R to be installed. At this time on sale you can find gas-discharge lamps even under the usual H series, many adapters are available. So with the installation of the lamps themselves there should be no problems.

Even if the headlights are installed for halogen lights, before installing xenon lamps onto their car, the lenses need to be replaced with a set specifically designed for a gas-discharge light source. This is explained by the difference between the design "Blinds", switching lighting modes. So, what you need to transition to the halogen on gas-discharge lamps:

Autocorrector

• suitable lenses;
• ignition block and fasteners;
• connectors for connecting, adapters, if necessary.

The best solution in this case is the purchase of a finished, certified kit (a copy of the document is desirable to store in a car). The auto-corrector of the light beam will have to arrive separately. If an electrical drive adjustment is already installed in your car, you can buy a universal auto-corrector without servo drives. Motors, if necessary, can also be purchased separately.

• The ignition unit and the automotive-corrector must be installed in clean, protected from moisture places. Make sure they are securely fixed. The light control module must be set strictly by level.
• To disassemble the headlights and installation of the lenses, you can warm up the hairdryer. Then a knife gently separate the glass.
• In no case do not touch xenon lamps. So that they live for a long time, it follows only for the base itself.
• Before assembly, make sure that there are no fingerprints or other contaminants on the inside of the glass and on the lens.

If you are installed, make sure that the logic is understood. electrical devices Auto in which changes will be made. In order to make the installation reliable, as well as eliminate the risk of fire, all connections must be well inlaced.

Why everything is so serious

The standard xenon installation is not more than half an hour. What does the wrong approach to installation look like:

What is the "salt", you ask? Xenon, installed in not intended for this headlight, will blind oncoming drivers. It's all about the nature of the source generating the light stream. The smaller wavelength of the radiation of gas-discharge lamps, as well as the large dimensions of the spark charge provoke the dispersion of the light stream when used with reflectors for halogen llamas. This explains the need to install a collective lens or a special reflector.

Even more exacerbates the situation of xenon to the headlights with a conventional reflector and a corrugated glass headlights. Unfortunately, many drivers ignore not only legislative status, but also the norms of common sense. Installing xenon with their own hands in conventional headlights must be accompanied by the action of corrugations. To do this, use a special polishing nozzle and gradation abrasives from P60 to P2000. The final processing occurs in large-grayscale and fine-grained polishing paste. You can also use fluoropol or based on cerium oxide.