Why in Lada Kalina a check is burning: causes and ways to eliminate faults. How to check and decrypt error codes on Lada Kalina Kalina Error 8 What to do

09.11.2019

xN-2111-43DA1A8C.XN-P1AI

Not very large in size on-board computer The state of X1 is able to perform a variety of climatic, route and diagnostic functions. It is installed on cars of the VAZ family - Kalina, Niva, 2123, 2110 and others.

What can state x1 - computer features
Diagnostics with a scanner - Do the nodes of your car work normally?
Independent check - decrypt error codes

1 What can state x1 - computer features

Diagnostic tester. Performs the function of a digital speedometer, tachometer, controls the operation of the power unit and throttle valve (tunned or regular), reads the system diagnostic codes, notifies the voltage of the power grid in the car and the motor temperature.
Route computer. Useful and convenient mode. In it, the on-board computer on the VAZ staff shows the speed (averaged value) ride for one trip, the distance traveled by the distance, the remains of fuel in the tank and its expense for the trip, travel time. Also, the BC predicts the range of the mileage on the fuel residue and has the last counter.
Supervisor. The device is equipped with an idle time counter and non-volatile memory, it is notified by the driver of the unscruited turning signs and dimensions, as well as rollback (spontaneous) vehicle.
Alarm The state reports the exceedment of the high-speed threshold, about malfunctions on the onboard network and the potentially unsafe for the auto overheating of the power unit.

On-board computer VAZ 21099
Throttle position sensor check
On-board computer DINGO - Practicality with minimal budget
Autoskner for self-diagnostics of any car

In addition, the state X1 has three additional features that came to domestic motorists. Tropic mode implies auto-controlling the cooling system of the machine, the plasmer is responsible for drying the candles and their subsequent heating to a temperature that allows you to produce without problems. cold launch Motor, Fast and Furious drops when switching fuel from gas to gasoline and vice versa.

Small nuance. Furious function works exclusively with high-quality brands of gasoline (95 and higher). The installation of the X1 is carried out without the slightest difficulty in the cap, which is available on the instrument panel.

You will need an instruction on the installation of the BC in specific model Car VAZ. The principle of installation is the same one. Need to remove the lining with dashboardAnd then alternately connect the monochrome factory wiring with the wires of the on-board computer. In a special setting, the X1 state does not need. Install the BC, turn on the ignition, run the device, and it immediately goes into a route computer mode. If you want to switch to the diagnostic mode, press the Corrption button. In the alarm mode (emergency) BC moves independently.

2 Diagnostics with a scanner - Do the nodes of your car work normally?

Boarding computer work

THR - the position of the throttle;
Uacc - battery voltage;
AIR - consumption (mass) air;
Freq - rotation (frequency) of the crankshaft;
Inj - the duration of the injection pulse;
UOZ - ignition advance;
FSM - idle sensor;
Qt is the fuel consumption coefficient.

3 Independent check - decrypt error codes

Checking onboard computer

Р0113 and Р0112 - incorrect operation of the sensor or failure of the mechanism controlling the temperature of the air flow at the entrance;
R0106 is an incorrect signal from the vehicle motion detector;
R0172 and R0171 - an increased or reduced fuel mixture;
R0122 (0123) - the throttle chain is broken;
P1102 is an insufficient signal from the oxygen sensor heater;
Р0647 - climate control system clutch;
Р0325 - Open detonation sensor;
Р0301-0304 - ignition passing in cylinders (in one of four or immediately in several).

tuningKod.ru.

The on-board computer is a device that helps the driver during the operation of the vehicle. Today we will talk about the domestic apparatus of Kalina X5 M. The computer is designed specifically for this model VAZ, which makes it easy to connect and use.

Standard Side Computer Options X5 M
New features of the device - what to expect from manufacturers in the future
Mounting the device with your own hands - how to prevent errors

1 Standard Side Computer Options X5 M

The following useful option is "plasmer". Including this feature, the owner of Lada Kalina launches the inflow of additional pulses to the electrodes of the candles. So in the frosty days of Lada, it turns out much faster, and the computer gives less error codes. Function "View Errors ECD" is intended for visual viewing of codes.

Another very useful option for Russian drivers is "Fuel quality control." Using the icons "-" or "+" on-board computer shows interest ratio Quality of gasoline refueling. Thanks to the option "Power Units" options, the driver of the LADA has the opportunity to see a clear picture of the state of the engine; time spent on its heating; As well as the battery charging and voltage indicator in the instrument panel sensors. When malfunction of the motor elements, the device issues error codes with the name "Engine ...".

The on-board computer X5 M to Kalina also has a built-in display settings feature. Using it, the driver can display the indicators that have the greatest value for it. Using the same option, you can adjust the color, contrast and display brightness.

Another useful function is "diagnostics of a gasoline pump." It controls the pressure and nutrition of the system. This option also makes it possible to determine the condition of each injector injector injector.

Indications BC Lada Kalina

P0134 - no signal from the oxygen sensor;
P0201 - Damage to the nozzle control circuit;
P0301 - Issues of ignition in cylinders appeared;
P0335 - There is no crankshaft sensor signal;
P0560 - Low voltage in the power supply of the machine.

2 new features of the device - what to expect from manufacturers in the future

3 installation of the device with your own hands - how to prevent errors

Every motorist must have universal device To diagnose your car.

To read, reset, the analysis of all sensors and the adjustment of the car's side computer can be independently using a special scanner ...

computer connection instructions;
set of new electrical wiring;
screwdriver;
double sided tape;
soldering iron.

At the beginning of the Lada battery, we turn off the minor terminal, after which we unscrew the 4 screws that the regular ashtray is attached. Pull it out and find a block with contact contacts alarm. We take out the block - we will connect the on-board computer to it.

Next, take out the orange wire that is connected to the seventh contact, and instead you connect the red-white wire from the computer. After that, insert the orange wire into a single red-white cord connector. Turn off the red and black cord from the tenth contact and install the red wire from the computer instead. In the single red wire connector insert the previously black wire disconnected.

If the computer does not work, you need to pull it out and clean the electrical cords with the pliers. If the grooves were formed during the installation process, they can be sought using plastic or metal strips.

Do you still think that the diagnosis of the car is difficult?

If you read these lines, then you have an interest to do something in the car yourself and really save, because you already familiarize that:

One hundred breaks big money for a simple computer diagnostics
To find out the error you need to go to the specialists
In the services there are simple wrench, and good specials do not find

And you of course tired of throwing money into the wind, and about how to ride a hundred constantly can not be and speech, then you need a simple ELM327 autocanner, which connects to any car and through a regular smartphone you will always find a problem, extinguish Check and save well! !!

We ourselves tested this scanner on different machines And he showed excellent resultsNow we recommend it to everyone! So that you do not fall into a Chinese fake, we publish a link to the official website of the autoskner.

tuningKod.ru.

Speed \u200b\u200bmode, fuel residue, travel time;
Turnover of the power unit;
The condition of the temperature of the cabin and the engine;
Fuel consumption and kilometer that can drive cars on the rest;
Voltage in the power grid;
Refrigerant temperature and the placement of the throttle damper;
Error codes;
Air circulation cyclicity, passed path, average speed and other useful parameters.

2 - overestimated voltage in the on-board network;
3 - Maltacks associated with the fuel indicator;
4 - Signals about violation temperature mode force aggregate;
6 - indicates overheating of the engine;
7 - Critical decrease in pressure in the lubrication system;
8 - violations in the brake node;
9 - Battery discharge.

De-energize the system, removing the terminal from the battery;
The control panel is dismantled, along with it;
Through the formation of the window, the fastenings of the BC are disconnected;
The device is retrieved with the preliminary disconnection of all connected devices;
Magnitol and panel are mounted in place.

Autoflit.ru.

xN-2111-43DA1A8C.XN-P1AI

Turn off the ignition;
You must press the daily mileage button and hold it in this position for some time;
Simultaneously with the holding of this button, turn on the ignition;
After that, all pointers on the dashboard must come into motion, they must do the path of the zero mark to the maximum. Now press the button on the steering wheel switch of janitors. This makes it possible to remove readings on the dashboard. The third one will see the list of all the complications arising.

2 - this alarm signal reports a significant overboard network voltage;
3 - warns about problems with the sensor in the fuel tank;
4 - can signal the problems with the engine coolant or the power supply of the temperature control sensor;
5 - malfunctions of the device that controls the temperature of the outer air;
6 - fixation of the ECU overheating of the power unit, to continue the movement after the appearance of such a signal is impossible;
7 - warns of insufficient pressure in the motor lubrication system;
8 - when this signal appears, you should pay attention to the car brake system;
9 - warns of insufficient voltage of the battery;
E - warns of a possible error in EEPROM.

B - shows about the faults related to the body. It can be airbags, central locking, wipers, windows;
C - is related to malfunctions in the chassis;
P - warns about problems in force aggregate or transmissions.

0 - is common to ATS;
1 - refers to the machine manufacturer;
2 - also from the car manufacturer;
3 - is a backup digit code.

1 - malfunction with the supply of fuel and air mixture;
2 - also relates to problems with the supply of the working mixture;
3 - malfunction with car ignition;
4 - signal on the possibility of auxiliary control;
5 - no maintenance system does not work;
6 - malfunctions with ECU chains;
7 and 8 are a car transmission errors.

Autoflit.ru.

Hello everyone today I will show how to diagnose the instrument panels and see the error codes on Kalina. For this you need when the ignition is turned off, click the button on the panel that is responsible for resetting the daily run. And turn on simultaneously ignition. After that, the diagnostic mode is launched. To see the error codes, you need when the arrows run down the daily mileage reset button or the steering switch on the right. As a result, on the screen where the clock will appear the firmware version and further error codes.

Deciphering error codes in Kalina dashboard

2-high voltage onboard network;
3-error of the fuel level sensor (if the sensor chain break is determined during 20c);
4-error of the coolant temperature sensor (if the sensor chain break is determined during 20c);
5-error sensor outdoor temperature (if within 20s there are no sensor readings, indication on the LCD "-С");
6-overheating of the engine (criteria for the actuation of the accelerator signaling device);
7-emergency oil pressure (criterion for the actuation of the acoustic alarm is performed);
8-defect brake system (Criterion for the actuation of the acoustic signaling device);
The 9-rechargeable battery is discharged (the criterion for actuating an acoustic alarm is made);
E-definition of error in the data packet laid in EEPROM.

Video on the diagnostics of the instrument panel and error codes

- This is the most frequent malfunctionwhich may arise from the Lada Kalina. Sometimes, there is no possibility to diagnose with the connection. The question arises: how to spend the diagnosis? There is an exit. Not everyone knows, but the diagnosis of the car can be carried out using the dashboard.

Video about self-digestion ECU using the instrument panel to Lada Kalina:

In video materials it will seem clearly how to diagnose the viburnum freedom with the dashboard, as well as there are some explanations and recommendations.

Diagnostic process

The instrument panel with which you can diagnose

So, the diagnostic operations with the help of the dashboard are not complex and almost every car owner of Kalina can cope with it independently. Guided by phased instructions written below can be diagnosed on any generation of VAZ 1117-1119.

We now move directly to the process of making diagnostic operations:

Reset the rate of daily mileage. To do this, a special button is present on a combination of instruments.
Using the daily mileage button, we reset the indicator
Do not let go and turn the button to I.
Insert the key in the ignition and turn to position 1
If everything is done correctly, then all the arrows on the instrument combinations will begin to move from the initial position (zero) to the final.
Appliance arrows move from start to the final control point
Using the button, on the knob switching knob, we switch the information screen.
First of all, the tachometer and sensors are checked for performance.
In the second case, the software version will be displayed on the screen. Often, as practice shows - this is version 3.0 or 3.2.
The instrument panel screen shows the software version (in this case UER 3.0)
In the third event, the error codes that are present in the ECU will come out.
Errors that are obtained in the diagnostic process. In photo 6 8 and 4 errors.
Now let's give the decryption of errors that can jump on the dashboard screen:

Decoding instrument panel readings

2 - the on-board network voltage exceeds the norm;
3 - The fuel level sensor error has been detected. It occurs if the sensor circuit occurs during 20s.
4 - The coolant temperature sensor error occurred. Appears if a break in the chain is found within 30 seconds.
5 - In the car detected an error of the outdoor temperature sensor. If within 20 seconds there are no sensor readings, "-C" appears);
6 - detected;
7 - emergency oil pressure;
8 - error, or a brake system malfunction;
9 - low battery charge;

E. - Definition of error in the data packet laid in EEPROM.

Now it will remain to compare all the errors that jumped out on the screen with those indicated above.

conclusions

As practice shows, the diagnosis of the viburnum is diagnosed with the instrument panel is quite easy and simple. This requires special tools or skills. It is worth noting that by the experience of many car owners, it is not always possible to fully diagnose everything, since the wear and breakage of some contact compounds can be interpreted by the ECU in its own way.

According to the service manual, the error number 4 in the control unit flashes the coolant temperature sensor fault.

According to the participants of our community and in the opinion of motorists, this error Pretty common, and often appears on Lada Kalina. It is worth understanding why mistakes pop up and how to eliminate a malfunction.

The reasons for which the error 4 in the ECU is several. Consider all possible options:

All these reasons are quite easily eliminated and are not a reason for serious anxiety.

How to see errors on the onboard computer?

The video shows the "self-diagnosis" mode of the car of Lada Kalina, at which you can find out if there are errors:

Elimination methods

In order to eliminate the cause of the error 4 in the viburnum ECU, it is worth doing the following operations:

Check the sensor for performance. If he "died", then it should be replaced.
Check if there is a contact, and there is no plaque. Clean planting place and replace the sensor.
Check the onboard chain and make sure that there is contact in it.
But the random error to treat only the firmware of the ECU and the discharge of all errors. To do this, it is recommended to contact the car service.

Thus, it is possible to solve the problem itself, but as practice shows, it does not always work. Error 4 quite often pops up in the cold season, when the car stands for a long time in the fresh air, and not in the garage.

conclusions

Find and eliminate the cause of 4 mistakes in Lada Kalina turned out to be quite easy. Even decryption error codes and requires special knowledge, but necessary information Can be found in this article.

How to throw off / reset the error Check Engine on the lada cars Kalina - This question often worries owners of cars VAZ. The fact is that most of the owners of "LAD" have come across such a problem when neither the error "Chek" lights up

Here, many are immediately a panic. Do not worry, there is nothing terrible. First, this error pops up when any sensor fails.

Secondly, this error pops up when we in the combustion chamber comes the wrong mixture. This may be in two cases: some sensor does not work correctly, or low-quality gasoline. Try with the next refueling, pour better fuel.

Video instruction: how to reset the error on the Lada Calina Control Unit

Step-by-step instruction reset mistakes Check Engine in Lada Kalina

In order to reset Check Engine error in Lada Kalina you will need to perform the following procedure:

Well, in principle, and that's it! I think most of you can perform these actions without much difficulty. Well, especially for you, I want to lay out the error codes and their decoding on Lada Kalina cars.

Lada Kalina error codes and their decoding

Deciphering error codes in the dashboard:

2-high voltage onboard network;
3-error of the fuel level sensor (if the sensor chain break is determined during 20c);
4-error of the coolant temperature sensor (if the sensor chain break is determined during 20c);
5-error of the outdoor temperature sensor (if there are no sensor readings during 20c, the indication on the LCD "-C");
6-overheating of the engine (criteria for the actuation of the accelerator signaling device);
7-emergency oil pressure (criterion for the response of the acoustic alarm is completed);
8-defect brake system (criterion for the response of the acoustic alarm is performed);
The 9-rechargeable battery is discharged (the criterion for the response of the acoustic alarm is performed);
E-definition of error in the data packet laid in EEPROM

On this I would like to finish this article on reset check errors Engine in Lada Kalina! Until soon meetings friends on our website!

Similar articles: