HUD display - automotive projector on the windshield. HUD projector on windshield HUD projector with GPS instruction manual

Hi friends! Due to the fact that my swallow ( Chevrolet Aveo.) is not equipped with a full-fledged onboard computer, and change the car on more expensive there is no desire, nor the opportunity, I decided to buy a HUD, he onboard computer projector on windshield.

HUD projector or Head-Up Display - This is a projector that projects the instrument readings directly on the glass just below the driver's eye level.

Praying bluetooth adapter ( ELM327 Bluetooth OBD-IIwhich transmits the on-board computer data to the phone through bluetooth), I realized that it is not entirely convenient.
Therefore, I decided to purchase a device that is deprived of all these flaws.

Selection and order

Screenshot of payment

Specification in English

Specification in Russian (my translation)

Model: A8.
Language: English
Color: The black
Material: Plastic

Display: 5.5 inches.
Elements in the diplege: speed, instant fuel consumption (per hundred kilometers \\ lestster per hour), on-board network voltage. An alarm when the speed is exceeded, the temperature of the coolant, the battery voltage, engine revolutions, errors in the ECU.
Displayed data: time, vehicle speed, engine speed, fuel consumption, throttle position, engine cooling fluid temperature, reads and resets the motor ECU errors.

EQUIPMENT

The size and weight of the projector correspond to the specified on the site. Made from black plastic black, with rounded edges. License and screens, with a small deformation with hands, are missing.

Principle of operation, installation

We connect the cable to the OBDII diagnostic connector (you need to rush in a submissive space, sometimes under the ashtray or in the armrest). The cable, if desired, can be shoved under the skin or sealing salon.
Connect the other end of the cable to the HUD projector (MiniUSB).
In the place of projection of the indicators on the glass, it is necessary to stick a mirror film running in the kit (pre-clearing the glass on the inside).

All items (designations, readings) are displayed mirrored. It was created in order to reflect the information back into the readable view when reflecting on the windshield.

Food device

On the one hand, the cable has an OBDII connector (16 contacts), on the other mini USB.
The cable has a length of 115 cm.

Controls

When installing, do not forget to remove the protective film, it can partially reflect the light, which will affect the general perception.
The screen itself has a matte coating.

HUD projector in the car.

P.S. Immediately I want to note that in fact the image on the windshield is visible better, more clearly, the technique cannot transmit all the features of the human eye.

The first thing that rushes into the eye is that the image on the windshield is bold. The fact is that on most cars there is a triplex glass - a multilayer glass (two or more organic or silicate glass glued together).

For such cases, a special transparent film is provided, which is glued on the glass, over the projector itself.
After gluing the film, the image on the windshield becomes brighter, rushing, and the effect of "dual glass" disappears.

It did not glue this film, since the slope of the glass is too large and the reflection does not fit in the zone allotted.

In fact, the dual reflection practically does not interfere, and after a short time it allows you to comfortably use the device.

After we have decided on a place, you can glue the anti-slip rug, and the projector itself is already putting on it. After these manipulations, our projector will no longer slide along the torpedo.

PHOTO AND VIDEO

Stock Foto Happy Reflective film

Stock Foto Happy reflective film

Video from the video recorder in the evening

Video from the phone in the evening

Displays information and other elements

The device can automatically adjust the brightness of the backlight, this is achieved by light sensorwhich is in the upper right corner ( Fig. 1, Footnote 1).
At night, the brightness will be minimal, in the daytime maximum.

Most of the readings from the dashboard of the car are duplicated on the windshield. Here we can see:
Tachometer - shows the number of revolutions per unit of time ( Fig. 1, footnote 2).
Indicator - ( Fig. 1, footnote 5) tells us that all the values \u200b\u200bof the tachometer must be multiplied by 1000. Thus, we will get real tachometer values.

Alarm panel ( Fig. 1, footnote 3).
Current vehicle speed ( Fig. 1, footnote 4), which is measured by default in km / h ( Fig. 1, footnote 6)

The right is the indication of the coolant temperature ( Fig. 1, footnote 7), (Blue strip from 40-80c, red 100-120 C.)

By pressing the middle of the projector lever (wheel side), the testimony of the green indication zone is changing. (Fig. 1, footnote 10). By default, the device shows us a distance traveled by a car, which can be changed on the onboard voltage of the network and the temperature of the coolant. When changing the display mode, the icons are also changing. Fig. 1. Zone 8.).

A fuel consumption zone is slightly higher than this zone ( Fig. 1, footnote 12). By default, fuel consumption is indicated in a liter / hour, but as soon as the car begins its movement, the indicator switches the display of lithra consumption per 100 km (instant fuel consumption).

The projection display can be informed (sound signals, burning icon) of the driver about exceeding speed, exceeding turns, as well as about the exceeding temperature Coolant. The wheel lever up (holding about 3 seconds), sound information can be disabled.

If an error occurs in the engine and not only, the indicator appears ( Fig. 1, footnote 3). The device is able to drop the engine errors, it is done as follows: Turn off the device using a side button, we turn on the ignition, but do not start the car.
After the device screen goes out, you must press and hold (about 3 seconds to the audio signal) the wheel down.
After that, you hear how some relays of your car are clicked a couple of times.
Everything, errors are reset.

Projector menu and its calibration

To go to the device menu, you must click (Press) and hold (about 3 seconds) wheel.

After that, we will have a zero menu item. The menu switches to a short press on the wheel of the wheel, total in the menu 16 points.

The fine configuration menu allows us to configure the notification settings, as well as calibrate certain values \u200b\u200bfor your car.

0. (Zero) The menu item allows us to calibrate value car value.
By default, this indicator is at the level of 107%. Wheel down or up, these values \u200b\u200bcan be changed. In my observation, this parameter was overestimated and I set it to 100.

1. The menu item is calibrated tachometer readings, the default value is set to 117. I was reduced to 100%.

2. Menu item calibrate fuel consumption (Default was 100%).

3. The menu item allows us set the level of tachometer increased revolutions (0-7 thousand revolutions).

4. The menu item allows us set the level of tachometer (By default it was a value of 25, that is, 2.5 thousand rubles), in which will work warning of high revs (0-7 thousand revolutions).

5. The menu item allows you to configure speed \u200b\u200bExcess Warning.
By default, the alarm is worth 0, this indicates that the speed warning works on the 6th menu item.
If we set the value 1, then when you reach 60.80, 100 and 120 km / h, the sound signals will follow.

6. The menu item allows us to set a single speed \u200b\u200bindicator, to achieve which will follow warning sound signal.

7. Menu item, sets the display. There are 3 modes (mode 0, 1 and 2):
Mode 0. Shows all the information
Mode 1. Shows full information only up to 80 km / h, when the speed is reached 80 km / h and above, only brief information remains, fuel consumption and current speed.
Mode 2. Always shows brief information, fuel consumption and current speed.

8. Menu item, it tuning brightness (0-2). 0 - automatic mode. The maximum brightness is achieved at a value of 2.

9. Menu item, Setup fuel flow displays. 0 - not to show fuel consumption, 1 - show the consumption of liters \\ hour, 2 - show the cost of 100 km

10. Menu item allows configure the display of the main zone of the projector (Fig. 1, footnote 4), and remove the engine speed there (tachometer) - at a value of 0.
With value 1 - speed in kilometers per hour will be displayed.
With a value of 2 - the speed in miles will be displayed per hour.

11. Menu item, cooling fluid temperature:
With value 1, the temperature is displayed in Celsius.
With value 2, the temperature will be displayed in Faringent

12. The menu item allows you to configure units of measuring distance traveled. 0 - kilometers, 1 - miles.

13. The menu item allows calibrate fuel consumption. By default, 80 (permissible range 10-500, most likely this is the volume of the full tank)

14. The menu item is also devoted to the consumption of fuel and is associated with a fence of air or emissions. exhaust gases. Default 16 (valid range 0-100).
When 0, the data is taken from the sensor.

To be honest, I did not understand what it is, but in the instructions on this it says:

Air Displacement Setting.
0 Means The Vehicle Has The Airflow.
1 Means The Reference Fuel Consumption.
2 Means Vehicle Emission IS 0.2L, 0.3l Respectively

In 15 menu item, specify voltage value In which the device understands, the engine is running or not. The principle of operation is simple, the generator starts working with the car, which increases the onboard voltage usually to 14.2 and slightly above the volt.
By default, 132, which corresponds to 13.2V (permissible range 110-150).

16. Menu item, with value 1 occurs reset Devices.

Conclusion made during operation:

Benefits:
1) when moving do not give the eyes on dashboard, respectively, are less distracted (useful for newbies)!
2) The device much more accurately displays the data than the arrows, made sure that it itself.
The arrows on the dashboard lie, the device takes the data directly from the computer.
3) high-quality assembly.
4) The device is compatible with any car supporting the OBDII standard.
5) Full on-board computer.

And now about the disadvantages:
1) Under the right sunlight, disassemble the testimony is extremely difficult.
Specially reflective film saves the situation, but not 100%.
2) The anti-slip rug is very sticky, I think that in the summer from the heat he is simply melted under the right rays of the sun.

That's all, the world all! \u003d)

Due to the fact that my car is not equipped with a full-fledged on-board computer, and change the car on a more expensive there is no desire, nor the opportunity, I decided to buy HUD, it is the side of the side computer on the windshield.

The HUD projector or Head-Up Display is a projector that projects the instrument readings directly on the glass just below the driver's eye level.

When you play the bluetooth adapter (ELM327 Bluetooth OBD-II, which transmits the on-board computer data to the phone through bluetooth), I realized that it is not entirely convenient. Therefore, I decided to purchase a device that is deprived of all these flaws.

Selection and order

HUD projector is sold in two versions, in one-color version, and multicolored. I ordered multicolor. A variant in one-color version is cheaper. The parcel went about 20 days. Came in the usual puppet package.

Specification in Russian (my translation)

• Model: A8.
• English language
• Black color
• Material: plastic
• Display: 5.5 inches.
• Elements on the display: speed, instant fuel consumption (one hundred kilometers liter per hour), onboard network voltage. An alarm when the speed is exceeded, the temperature of the coolant, the battery voltage, engine revolutions, errors in the ECU.
• The output data: time, vehicle speed, engine speed, fuel consumption, throttle position, engine cooling fluid temperature, reads and reces the motor ECU errors.

EQUIPMENT

Projection display;
- reflective film (special semi-transparent film to improve the readability of the projector);
- OBDII cable;
- anti-slip rug;
- User manual in English.

The size and weight of the projector correspond to the specified on the site. Made from black plastic black, with rounded edges. License and screens, with a small deformation with hands, are missing.

Principle of operation, installation

On the car torpedo, we put the projector (using the anti-slip rug). The projector when working lights light, which mirrored turns over the frontal glass, on which we actually see the information in the usual form.

We connect the cable to the OBDII diagnostic connector (you need to rush in a submissive space, sometimes under the ashtray or in the armrest). The cable, if desired, can be shoved under the skin or sealing salon.

Connect the other end of the cable to the HUD projector (MiniUSB). In the place of projection of the indicators on the glass, it is necessary to stick a mirror film running in the kit (pre-clearing the glass on the inside).

All items (designations, readings) are displayed mirrored. It was created in order to reflect the information back into the readable view when reflecting on the windshield.

Food device

The device does not require additional nutrition, it works from one cable running in the kit.

The projector can only work if there is a diagnostic connector (on many modern cars, this connector is available), the switching on and off the device is automatically, but if desired, the projector can be enabled or disabled in manual.

On the one hand, the cable has an OBDII connector (16 contacts), on the other mini USB. The cable has a length of 115 cm.

Controls

The projection display has a diagonal of 5.5 inches. From the left side, next to the power connector, there is a power button, as well as 3 position Jostik to navigate the menu, settings and calibration devices. On the back there is a small hole for zoom (squeezing).

When installing, do not forget to remove the protective film, it can partially reflect the light, which will affect the general perception. The screen itself has a matte coating.

HUD projector in the car

After starting the engine, the device displays the battery voltage for a few seconds, after which it starts completely.

Immediately I want to note that in fact the image on the windshield is visible better, more clearly, the technique cannot transmit all the features of the human eye.

The first thing that rushes into the eye is that the image on the windshield is bold. The fact is that on most cars there is a triplex glass - a multilayer glass (two or more organic or silicate glass glued together).

For such cases, a special transparent film is provided, which is glued on the glass, over the projector itself. After gluing the film, the image on the windshield becomes brighter, rushing, and the effect of "dual glass" disappears.

After we have decided on a place, you can glue the anti-slip rug, and the projector itself is already putting on it. After these manipulations, our projector will no longer slide along the torpedo.

PHOTO AND VIDEO

Stock Foto Happy reflective film

Video from the video recorder in the evening (without a film):

Displays information and other elements

Picture 1.

The device can automatically adjust the brightness of the backlight, this is achieved due to the light sensor, which is in the upper right corner (Fig. 1, footnote 1).
At night, the brightness will be minimal, in the daytime maximum.

Most of the readings from the dashboard of the car are duplicated on the windshield. Here we can see:
Tachometer - shows the number of revolutions per unit of time (Fig. 1, footnote 2).
Indicator - (Fig. 1, Footnote 5) tells us that all the values \u200b\u200bof the tachometer must be multiplied by 1000. Thus, we get real tachometer values.

Alarm panel (Fig. 1, footnote 3).
Current vehicle speed (Fig. 1, footnote 4), which is measured by default in KMF (Fig. 1, footnote 6)

The right is the indication of the coolant temperature (Fig. 1, footnote 7), (blue bar from 40-80s, red 100-120 C.)

By pressing the middle of the projector lever (wheel from the side), the testimony of the green indication zone changes (Fig. 1, footnote 10). By default, the device shows us a distance traveled by a car, which can be changed on the onboard voltage of the network and the temperature of the coolant. When changing the display mode, the icons are also changing (Fig. 1. Zone 8.).

A fuel consumption zone is slightly higher than this zone (Fig. 1, footnote 12). By default, fuel consumption is indicated in a liter hour, but as soon as the car begins its movement, the indicator switches the display of lithra consumption per 100 km (instant fuel consumption).

Other interesting features

The projection display can be informed (by sound signals, a burning icon) of the driver about exceeding speed, exceeding revolutions, as well as about the exceedment of the coolant temperature. The wheel lever up (holding about 3 seconds), sound information can be disabled.

If an error occurs in the engine and not only, the indicator appears (Fig. 1, footnote 3). The device is able to drop the engine errors, it is done as follows: Turn off the device using a side button, we turn on the ignition, but do not start the car.
After the device screen goes out, you must press and hold (about 3 seconds to the audio signal) the wheel down.
After that, you hear how some relays of your car are clicked a couple of times.
Everything, errors are reset.

Projector menu and its calibration

To go to the device menu, you must click (Press) and hold (about 3 seconds) wheel.

After that, we will have a zero menu item. The menu switches to a short press on the wheel of the wheel, in the menu 16 of the items.

The fine configuration menu allows us to configure the notification settings, as well as calibrate certain values \u200b\u200bfor your car.

0. (Zero) The menu item allows us to calibrate the velocity of the vehicle.
By default, this indicator is at the level of 107%. Wheel down or up, these values \u200b\u200bcan be changed. In my observation, this parameter was overestimated and I set it to 100.

1. The menu item Calibrates the tachometer readings, the default value is set to 117. I was reduced to 100%.

2. The menu item is calibrated fuel consumption (by default it was 100%).

3. The menu item allows us to set the level of the tachometer (by default it was a value of 25, i.e. 2.5 thousand), in which the alarm on increased revs (0-7 thousand revolutions) will be activated.

4. The menu item allows us to set the level of the tachometer (by default it was a value of 25, that is, 2.5 thousand proceedings), in which a warning will be triggered about increased revs (0-7 thousand revolutions).

5. The menu item allows you to configure a speed exceeding warning.
By default, the alarm is worth 0, this indicates that the speed warning works on the 6th menu item.
If we set a value of 1, then when you reach 60.80, 100 and 120 kmCh, the audio signals will follow.

6. The menu item allows us to set a single speed indicator to achieve which will follow a warning beep.

7. The menu item, configures the display. There are 3 modes (mode 0, 1 and 2):
Mode 0. Shows all the information
Mode 1. Shows full information only up to 80 kmh, when the speed is reached 80 km and above, only brief information remains, fuel consumption and current speed.
Mode 2. Always shows brief information, fuel consumption and current speed.

8. Menu item, this brightness setting (0-2). 0 - automatic mode. The maximum brightness is achieved at a value of 2.

9. Menu item, setting the fuel consumption display. 0 - Do not show fuel consumption, 1 - Show consumption of liters Hour, 2 - Show consumption per 100 km

10. The menu item allows you to configure the display of the main zone of the projector (Fig. 1, footnote 4), and to derive the engine speed there (tachometer) - with a value of 0.
With value 1 - speed in kilometers per hour will be displayed.
With a value of 2 - the speed in miles will be displayed per hour.

11. Menu item, coolant temperature:
With value 1, the temperature is displayed in Celsius.
With value 2, the temperature will be displayed in Faringent

12. The menu item allows you to configure the measurement units of the distance traveled. 0 - kilometers, 1 - miles.

13. The menu item allows fuel consumption. By default, 80 (permissible range 10-500, most likely this is the volume of the full tank)

14. The menu item is also dedicated to fuel consumption and is associated with airborne or emissions of exhaust gases. Default 16 (valid range 0-100).
When 0, the data is taken from the sensor.

To be honest, I did not understand what it is, but in the instructions on this it says:
Air Displacement Setting.
0 Means The Vehicle Has The Airflow.
1 Means The Reference Fuel Consumption.
2 Means Vehicle Emission IS 0.2L, 0.3l Respectively
If anyone understand, please write in the comments.

In 15 menu item, indicate the voltage value in which the device understands, the engine engine is running or not. The principle of operation is simple, the generator starts working with the car, which increases the onboard voltage usually to 14.2 and slightly above the volt.
By default, 132, which corresponds to 13.2V (permissible range 110-150).

16. The menu item, with value 1, the device settings are reset.

Conclusion made during operation:

This device may seem like a stupid toy and no more. But there are a lot of advantages!

Benefits:
1) When moving, do not lower the eyes on the dashboard, respectively, are less distracted (useful for newbies)!
2) The device much more accurately displays the data than the arrows, made sure that it itself.
The arrows on the dashboard lie, the device takes the data directly from the computer.
3) high-quality assembly.
4) The device is compatible with any car supporting the OBDII standard.
5) Full on-board computer.

And now about the disadvantages:
1) Under the right sunlight, disassemble the testimony is extremely difficult.
Specially reflective film saves the situation, but not 100%.
2) The anti-slip rug is very sticky, I think that in the summer from the heat he is simply melted under the right rays of the sun.

In this article, consisting of two blocks, the following elements of the HUD Settings category of a popular poker program will be considered in detail in detail.

• Hud Designer.
• Stat Appearance
• General Settings
• Site Options.
• Popup Designer.
• Chart Designer.
• Main Popup / Table Hud
• NoteCaddy popups.
• Hud Filters.
• Tournament Filters.
• Hotkeys

In the first part, we will talk about the first four tabs, in the second - about the remaining.

HUD and HUD Designer Profiles

HEADS Up Display (HUD) is a process that is the purpose of which is to display statistics on real-time players or during the analysis of the distribution by rebel.

At the top of the HUD Settings panel there is a graphical menu that displays the HUD profile that is selected for editing.

By clicking on this menu, we will call a list of graphic images of all accessible to select and edit profiles.

After choosing the profile we need, we can proceed to edit it.

The HUD Designer tab consists of the following items:

Creation and removal buttons of various HUD profiles

By pressing the "New" button, we can create a new HUD profile. After pressing this button, the window will open in which we will be prompted to select a name for a new profile.

Using the "Delete" button, we can delete one or another profile.

With the "Import" button, we can run the procedure for importing previously saved HUD profiles. In the window that opens, we will be prompted to select the desired file to import, then click "Open". After that, the program will ask us whether we wish to overwrite the existing settings of pop-up windows (pop-ups) HUD. Select "Yes" "or" No ".

The "Import 1.0" button launches the import procedure from the stored profile of the first version of the HoldemManager program.

Using the "Reset" button, we can return all HUD profile settings to the initial. After pressing this button, two recovery options will be offered:

1. All Configs - restore settings in all HUD profiles.
2. PANEL POSITION - Restoring the default settings location of stove panels in HUD.

The edit field of the active HUD profile

This panel consists of the following items:

1. Field of stats that will display our HUD.
2. Buttons with which you can add separators in HUD.
3. Available to add to the first floor field.

To add a stat in the first field, we need to find the statistics of interest in the second field, and then by pressing the button "Left" or using a double click Add it in the HUD display field.

To change the position of one or another status, use the Up Arrow and Down Arrow buttons at the bottom of the first field.

To delete one or another stat from the first field, you can click the "Arrow to the right" button or use the double click.

To add separators in HUD, we need to highlight the Stat in the first field, after which we want to set the separator, and then click "New Line", if we want the following steps to be displayed in a new row; Or "New Panel" - if it is necessary that below the stats are displayed in the new panel.

Options launch HUD

"START HUD ON LAUNCH" - this option automatically starts HUD when you start HM2.

"Show Caddy Notes" - when you activate this option, the HUD will display the notes that create the CaddyNotes application.

"START CADDY REPORT ON HUD LAUNCH" - if this option is activated, then at the beginning of the display HUD "and the" Reports "window of the CaddyNotes application automatically opens at the table.

"Search Stats" - opens the static search string to add them to the status display field.

Stat Appearance

This tab is intended for individual statistical settings. It consists of the following elements:

1. The field in which the stats displayed in HUD are displayed.
2. Setting the color differentiation of stoves.

Color differentiation of statistical indicators allows us to use up to five colors coloring stats. Colors are connected and disconnected by pressing the "OFF" and "ON" buttons.

For color settings, we need to choose the stat for which we want to set color ranges. Then we connect the required number of color positions, indicate which colors we want to paint static depending on the range of the status, enter the parameters of the ranges in the fields that are located under the positions of colors.

3. Other settings.

Through this panel, we can individually configure the display settings for each stoves. Below are the descriptions of each option:

"Font" - changing the font of the status display.

"Popup" - fixing the pop-up window (Pop-APA), which will be displayed when you hover and hold the cursor on the stack or click on the stack.

"Decimals" is an indication of the number displayed after the comma, the static signs.

"Abbreviation" is a parameter that defines which abbreviation to write in front of the status if its display is written in the settings on the "Config Properties" tab.

"DIM FOR SAMPLE SIZE" - if this option is active, then the brightness of the color of the status will increase as the number of distributions increases, on the basis of which this statch was calculated.

"Display for Hero" - with the activated one option, the STAT will be allowed to display in stats to "HERO".

"Display For Opponents" - with the activated option, the Stat will be allowed to display in stats on the opponents "Hero".

"MIN SAMPLE" - the minimum number of samples, which is necessary for the program to output one or another statistics on the player.

General Settings

This tab consists of four blocks: COMMON Settings, Mucked Cards, Hud Front, Advanced Settings. Consider each of them.

The following options are available on the COMMON Settings panel:

"Hide Hero Hud" - hides the display of HUD at the Table for Hiro.

"Use Session Stats" - shows statistics on opponents on the basis of statistics, which is going during this session, and not based on information from the entire base as a whole.

"Show Note Icon" - When you activate this option, a notepad icon for writing and watching notes will be displayed near the players' stats.

"Show AutoTe Icon" -Topping icons of auto-arrest players.

"Show abbreviations" - display of abbreviation in front of stats.

"Show Table HUD" - display of the HUD table.

"Separator" - a selection of a symbol with which the stats will be divided.

"Stat Padding" - determining the gap between the stats.

"MIN HANDS" - determining the minimum amount of hands, to achieve which the stages on the players will be displayed.

"Overhang" - the maximum distance in pixels to which the HUD elements can get out of the table are indicated.

"Last Hand Winners" - here you can specify how many last draws should be displayed in the table for stoves. The information will be presented in the format: Nick of the Player - the size of the bank.

"Pots Over" - choose the size of the banks that will be displayed.

The following options are available on the Mucked Cards panel:

"HERO MUCKED CARDS" - if this option is activated, then when displaying after drawing the mandated cards and board cards, the mandated "Hiro maps will not be displayed.

"WON / LOSS LABEL" - if this option is activated, then when you display after drawing "mandated" cards and board cards, the amounts of won or lost to the player player are displayed under the displayed cards of the players in this hand.

"Display Time" - the display time of mandated cards and board cards after the end of the draw.

"Mucked Cards Opacity" - Determining the degree of transparency of mandated cards and board cards.

The HUD Font panel presents the following options:

"Background" - selection of stove lining color.

"Alt Background" - Selecting the color of the stove lining, which will be used when it is over to the mode of displaying stats on the player only for the period of his game for this table (double click on HUD).

"Text" - Select the color of the display of text elements HUD.

"Scale font" - if this option is not activated, then the font size of the stoves will not change when the table size changes.

"OPACITY" - slider setting the transparency of HUD elements.

"Font" - a font selection by which all HUD elements will be displayed.

The Adwanced Settings panel presents the following options:

"HUD Logging" - if this option is activated, the program writes all your actions to the hudlog.txt file. This file can be sent to developers to identify problems with the program.

"No HUD STATS WITHOUT HERO" - if this option is activated, then HM2 will not display stats on the players until Hiro is sitting at the table.

"Lock The Layout" - a ban on the movement of HUD elements on the gaming tables.

"AUTO Z-ORDER" - if this option is activated, then when you crash HM2, the gaming tables will not hang.

"Click for Stat Popup" - a call of pop-up windows (pop-ups) by clicking on the left mouse button, and not just guidance on the stat.

"REMEMBER SELECTION" - remember the selected HUD profile, as a default profile for editing.

"Force HUD on Top Tables" - in some poker rooms, the message of the game table can be displayed on top of the HUD elements, in view of which the HUD elements can begin "flicker." To prevent this effect and this option is designed. When an option is activated, the HUD elements are always out on top of any windows.

"Show HUD on Active Table Only" - if this option is activated, the HUD will be displayed exclusively on the table that is currently active.

"CUP% to 99%" and "Always Use Two Digits for Percentage" - all statistical indicators will always be doubled. For example, 08.

"Apply Color Coding for Popup Stats" - permission to color depending on the values \u200b\u200bof the statistics in pop apha.

"Popup Hover Time (MS)" - time through which a pop-up window will appear when you press or pointing the cursor to the stat.

Site Options.

This tab is designed to secure a particular HUD profile at a specific site or type of game. Here we can configure the following parameters:

• List of Site is a list of available poker sites.
• List of seats - definition of table lengths: Any, FR, HU, SH.
• List of Games - Determination of the game type: Any, Holdem, Omaha, Omaha8.
• Betting list - Game type definition: Any, No-Limit / Pot-Limit, Fixed Limit, Tournament.
• List of Street - the definition of the street on which one or another HUD will be displayed.

Fixing one or another profile for certain parameters of the type of game and the site is carried out as follows.

1. Indicate the necessary parameters in the Site, Seats, Games, Betting, Street lists.

2. Select from the list of available HUD profiles you need.

In the second part of this article, we will consider the remaining elements of the HUD Settings category.

In 2017, continues to gain popularity device called "Projector on the windshield of the car" (Heads Up Display or HUD, literally - display of the head of the head).

The task of this device is to increase comfort and driving safety. The device is projected onto the windshield of the car or a special screen current information from an on-board computer, which is located on the driver's view line and allows it not to be distracted on the dashboard - all the necessary information He has right in front of his eyes.

During the management of a moving technique, each millisecond of driver distraction on gold weight and increases the chance of an accident.

When the driver turns a look at the dashboard - the driver needs not only physically turning the eyes, but also "refocus" to a close-positioned item, adapt to a significantly different brightness.

HUD attract the ability to display an image in front of the car and thus radically reduce the driver distraction time. And each savvy millisecond is the lives of drivers and passengers.

We made a selection of 10 most interesting devices working on this technology.

1. NAVDY CAR HUD: Smart car gadget, which allows you to control the smartphone without being distracted by the road. Important information Projected on a transparent HUD screen located in the field of view of the driver. The projector connects to Android and iOS smartphones via Bluetooth and displays information at the windshield level. NAVDY maintains control of gestures and voice commands, which means you no longer have to go head while driving to find the right buttons. You can buy a device (~ 30 000 r.)

2. Carloudy: Wireless HUD projector for your car, reflecting the necessary information when driving. Connects to the Bluetooth smartphone, has a special transparent screen and voice control. The manufacturer of this device assures that the information is perfectly read even with bright sunlight. You only need to place the device on the dashboard and it displays the information directly in front of you, at the level of the windshield, showing the path and turns from the Google Maps navigator. Obviously, this embodiment of the smartphone is much safer and more convenient. Charge this device must be charged once every two weeks. Order Projector can be: [ ] (~ 15 600 r.)

3. Hudway Glass: It is a simplified version of the above-mentioned devices, and actually consists only of a stand under your smartphone and a special glass that performs the role of the screen to which the necessary information is reflected. You can use any free HUD app, but Hudway recommends its. You can buy this device [ ] (~ 3000 p.)

4. Continental AR HUD. Famous in the automotive world company Continental has its own device as a projector on the windshield. And they call it a HUD display of augmented reality. Such a device will be able to warn you about various road situations, for example, if you are inadvertently starting to move from your strip.
The projector displays virtual markers in front of the car to designate the strip on the road or the street to which they have to turn, making navigation even more convenient. Company Continental has already successfully implemented its development in premium bMW cars, Mercedes-Benz and Audi. More details [ ].

5. Vinet HUD. Another interesting device that performs the same functions, but in fact is not a projector on the windshield, as instead of the reflecting glass it uses a transparent OLED display. Although on the one hand, it limits its capabilities, on the other hand, manufacturers declare that in this way they completely solved the problem of visibility of information during bright sunlight, which is present at the rest of the projectors. The kit also developed an application for a smartphone, collecting detailed driving statistics. Device price: $ 199. (~ 12 000 r.)

6. Exploride.One of the most remarkable devices in this list. Developers promise that your car will become truly smart with this device. Indeed, the list of features of this projector is impressive: navigation, music, calls, mail, messengers, built-in camera and much more, and all this is controlled by voice and gestures to provide safe Rugging. The device at the time of writing this article is still in development. [ ]. In retail, this HUD projector will cost $ 499. (~ 30 000 r.)