Casting under camouflage. Machine in camouflage color gray camouflage on auto

Every day in long traffic jams there are a number of non-sparkled cars. The only option is highlighted from the mass of monotonous and boring machines - to cover it with a camouflage pattern. Recently, such tuning is becoming increasingly popular and popular. It can be performed in two ways: with the help of vinyl film and with paint.

Types of camouflage

1. Geometric camouflage on the car. Performed on a white background, gray and black pointed spots are applied to it.
2. Camouflage desert (sand). It assumes the use of yellow, brown and gray shades.
3. Pixel camouflage on the car. This type of camouflage is not so easy to make it easy. Colors can be used different, blue, white and others, suitable for winter time year or to the city interior. Color spots look like an approximate digital photo, from numerous squares. Pixel camouflage is best done in special workshops, but if you want to do everything yourself, it is better to choose a way with vinyl film.
4. Camouflage Military. Performed in the tones of protective military colors.

Preparation of a car to staining

It will be easier to paint the car in the hot season. Due to the absence of humidity and warm weather, the process will be much simplified. Painting is recommended to produce in the garage room or large box. To begin with, it is necessary to make glass, door frames, headlights and optics with newspapers with painting tape. If the paint is detected on these parts, it is necessary to carefully eliminate it with a solvent. Then it is necessary to degrease the entire body using a lobby tissue in gasoline.

Vinyl film

Before starting painting a car, you need to prepare all related substances and appliances. This process is made using the following:

• Vinyl film;
• Aerosol paint;
• Polyrol and sponge;
• Varnish creating a matte effect;
• Solvent;
• Gasoline 200 ml;
• Painting spatula, 7 cm wide;
• Flannel vets;
• Halogen lamp 1 thousand watts;
• Old newspapers;
• Paint scotch of paper.

The coating of the machine camouflage with the film is made as follows:

1. It is necessary to cut the film with large pieces with special holes. In the future, it will be stains.
2. By special technology The vinyl film is pasted on non-coated bodies.
3. The same procedure must be repeated in green and brown. Brown spots are applied using a stencil so that most black spots be covered. And the green should be applied on brown and black spots. After applying each color, it is necessary to dry it, and then just continue painting.
4. After completing the painting of the body, you need to remove the entire film. So that there are no clear contours, you can use the airbrush.
5. It is necessary to apply a special varnish.

Application on the body of the vinyl film gives many advantages for car enthusiasts. First, under it the paint coating will continue longer. Secondly, it is a reliable protection against scratches and chips. Thirdly, it is an opportunity to save money, and convert yourself appearance cars.

To the only minus of this method can be attributed The fact that due to the stencil on the body all stains will be in the same size. To make them different, you need to cut it yourself. It will take a lot of time, but in the end it turns out a unique camouflage painting.

Fixing varnish

To do this, it is recommended to purchase a special lacquer with a matte effect. Before applying it, you need to add a solvent and strengthener. It is recommended to apply lacquer on the body of 3 layers while drying each. To check, you need to touch your finger, and if it is not adhesive, it means the lacquer is dry and you can continue to work.

To make a car original need to do large stains So that they are located on several parts of the body. It is recommended to apply spots of the mustache, then the drawing will be more solid and beautiful. To achieve bright and saturated colors, it is better to apply each layer twice. Draw stains need to send a clockwise direction, including a roof and racks on the body. After all the steps are completed, the car is recommended to leave at least 12 hours in the garage.

Paint

Car transformation is carried out using the following:

• A large number of newspapers and old used securities;
• Painted scotch of different thickness;
• Pure and dry flannel rag;
• Solvent for paint - 500 g;
• Varnish with matte or glossy effect;
• Halogen lamp on 1 thousand. Watt;
• Construction spatula;
• Automali.

This way to paint the car is not easy, it takes a much longer time than when painting with vinyl film. Without the use of the stencil, complex forms are much more difficult. The whole process occurs in stages.

In conclusions, we can say that regardless of what kind of painting you choose, having all the materials and a sufficient amount of time, really do everything without referring to the specialists.

Many cars decorate the paintwork in the style of camouflage today. The color of this type is becoming increasingly popular and is no longer associated exclusively with military or hunters.

It is impossible to perform staining in factory conditions, usually only one-photographic paint coating is applied there, so many car owners are armed with the necessary colors of paint and try to perform work on themselves.

Painting in camouflage can be performed in different versions, so before the start of work and the purchase of paints and varnish materials, you need to read carefully with them and choose the appropriate color.

To apply camouflage on a car you need to have a good fantasy and designer's abilities. In order for the drawing to look organically, it is necessary to adhere to the Rules of the Golden section and evenly distribute the spots on the body of the vehicle. There are such painting options:

1. Forest camouflage.
2. Deserted (shades of sand or brown, camouflage on a car of this type has small and abstract spots).
3. Winter option (the drawing has a white-gray-black color gamut And stains on the body are made larger size).
4. Hunting or military (all stains are large, as if they go into each other and have blurred edges).

Last time, all the relevant digital camouflage - stains in this case have clear edges in the form of huge pixels. Usually such a design is used to decorate racing and sports cars.

Painting cars in camouflage

Despite the fashion, most often painted their vehicle In such a coloring hunter or military. Painting UAZ to camouflage with their own hands can be performed with minimal temporary and labor costs, since such cars often have a khaki color or a grayish shade. Therefore, you do not need to carefully select shades to perform work.

To perform work, you need to purchase such materials and tools in advance:

• Newspapers and magazines to protect the unexicable surface.
• Malar tape of different widths in rolls.
• The aerosol paint of the desired shade in the cans.
• Kraspopult (if work is not manually executed).
• Solvent.
• Clean rag.
• Primer and putty (if you need to eliminate some defects on the body).
• Degreaser.
• Varnish and polyrolol for finishing.

Apply camouflage on the car is recommended in a specially equipped room having good system Ventilation. This will not only avoid defects on only the paint and varnish coating, but it will also be useful in order for the applied paint layers dried as quickly as possible.

It is necessary to work in a protective suit and respirator, since the evaporation of paints and varnishes is very toxic. It is also desirable to equip the room with good halogen lamps that give lighting without glare. So you can look better to inspect the surface of the vehicle and apply paint.

The car must be thoroughly wash and dry, as well as tighten the salon with a film in such a way that in the process of work inwards did not get paint. It is also necessary to protect with newspapers or old magazines and painting scotching glass and vehicle optics (if you can - the headlights are better to dismantle).

If the car does not have any chip and irregularities on the surface, you can immediately treat it with a degreaser and start applying camouflage. If the blistering of the paint or rust was discovered - these places need to be cleaned up to the metal, handle with putty, carefully stabbing and coat with primer.

Camouflage on auto do it yourself

There are three ways to dye machines:

1. Application of drawings of leaves, reed and diverse grass (a plotter is used for work). This type is considered the most expensive, since it is very difficult to portray it.
2. Camouflage with blurred floors of spots.
3. Camouflage with clear contours of stains.

How to paint in camouflage? All work, no matter what coloring and type of drawing should be applied, the vehicle begins the vehicle carefully prepare and wash away from contamination. Before starting work, it is necessary to choose the shade of paint that the upper layers will be painted.

It all depends exclusively from the imagination and wishes of the owner. It is necessary to prepare specially chopped newspapers or self-adhesive film if it is necessary that the drawing on the body has with clear boundaries. After processing the degreaser, it is necessary to wait for a complete drying of the machine in chaotic order and, according to fantasy, the film is applied to the body.

It is necessary to ensure that the pieces come to all body parts and at the same time have not formed fuses. If you do not observe this rule - the paint may be unevenly lying in places of fesoms, and the entire body of the vehicle after dyeing will look inorganized. Then the selected paint layer is applied (it is better to start with dark shades).

Painting cars in camouflage - the process is long and not tolerant. It is necessary to wait until the paint layer is completely dry and only after that the car is again covered with the film so that the stains go a little on each other. Now you can apply a light shade of paint.

When all the colors were applied and they dried, you can remove the whole film. In order for the edges of the stains not to spoil, the surface must be pre-warm to warm with a halogen lamp. Thus, the scotch will return and will not spoil the paint coating.

If there is a desire to improve the camouflage slightly - you can soften its contours using the edging in the form of a black shadow. So that the camouflage of the car looked more winning, some car owners cover the surface of the layer of varnish.

But the majority preferred to leave the car as it is, the mattness gives it an unusual appearance (in this case, it is recommended to apply a layer of lacquer with a matte effect on the additional protection of the paintwork).

Methods of painting

There are two ways that can be used to apply camouflage colors on the body.

Method 1. After the vehicle was cleaned, a primer layer is applied on its body. The surface is covered with a scotch in order to avoid paint pushing and applied the darkest shade out of the selected. Create stains need from a small scotch of a small width, it will be better to bed onto the body surface.

Be sure to need to paint the roof of the car, otherwise the picture will not look like a solid and completed. The paint is better to choose quick-drying and after drying the tape from the body is removed. Then the spots are located in a new way, while staining the body with brighter paint and repeat the entire procedure again.

Then remove the scotch, at the request of the car owner, you can fix the drawing with varnish and carefully polish.

Method 2. In this case, the car will need to paint again. How to paint the car in camouflage? First, the vehicle is degreased and put the surface. After its drying, the surface must be cleaned with a skin and blew all the accumulated dust from the compressor.

Then the surface is ground and degreased, the body is ready for staining. The chopped film, tape or newspaper is placed on the body in chaotic order. Then the dark paint is applied and after it drying the tape is removed.

The procedure must be repeated several times, apply more gray, brown or green colors. The whole procedure does not take much time and as a result you can get camouflage with clear borders of spots.

If the owner wants the edges to be blurred - the body surface must warm the lamp and the edges spread out themselves. Also for this purpose you can use the airbrush.

In order not to fulfill all the work on coloring, you can purchase a special film and get it the body. Camouflage film on a car can be:

• Different texture and thickness.
• Have a glossy or matte surface.
• Being different widths, while it is ready for applying to cars.
• It has a different color gamut, so everyone can choose a drawing in the shower.

Its main advantage is the ease of removal - the old coating will not be corrupted and you can change the color at any time.

One of the very popular methods of tuning car today is staining to camouflage. Militari motifs are becoming increasingly relevant in design solutions for various directions, apparently, due to the fact that it fully reflects the modern pulse of life. If you figure it out, the camouflage on the car can serve two opposite goals. On the hunter or fisherman car, this means for masking transport in wildlife conditions. In a peaceful city, such a color is to stand out, attract attention, show your style and worldview. Machines in camouflage look harsh and brutally, cause respect and admiration.

Individual Painting Auto - Camouflage

Like any other pattern, the camouflage may well carry an aesthetic load or be a purely functional means of disguise. Depending on the tasks and types of terrain, various types of camouflage can be applied to the car - about them and will be discussed below.

Geometric camouflage

The geometric (or chopped) species was created in order not to hide the object so much how much to break its silhouette on the sections with chopped geometric shapes of different shapes and size. Being painted in this way, the car is very difficult to visually assess the real size and outlines. Usually white, gray and black color are used here.

Originally created for military purposes, this drawing today is very popular with designers. By adding sections with an unexpected color, for example, blue, pink or purple, you can create very interesting car coloring options in aesthetic plan.

Geometric camouflage on auto

Pixel Figure

Pixel (or digital) camouflage visually similar to the location of the pixels in the computer monitor. It is also called "destructive" - \u200b\u200bhe lubricates the silhouette of the car, hiding his movement on the ground. If we are talking about disguise, there is a special instruction that determines the ratio of spots of different colors. The colors themselves are determined based on the terrain in which the object acts.

The pixel pattern can be applied in urban areas, and in conditions of mountains or desert, as well as in some species of the forest. For rocky mountains and urban areas, gray-white and black is used.

In the desert, the stains of sand color are appropriate, it is obvious. For forest areas, green with brown is chosen, black.

Pixel drawing on auto

Forest view

The most common drawing among those who carry out the camouflage of the car in functional purposes is forest. Here prevails the green color and its different shades. Brown and black colors are added to it. Forest patterns use smooth lines and soft transitions for a complete merge with forest foliage.

Those who use this drawing in exceptionally aesthetic use can make it in any colors: acidic, purple, pink, etc. It all depends on taste and fantasy flight.

Painting Auto Camouflage - Forest View

Winter drawing

It is quite natural that there are types of camouflage for a car in a snowy winter. It prevails white color to which gray-blue divorces are added. Winter option can be made both in the form of smooth lines and transitions and in the "chopped" execution.

Sometimes B. winter drawing Black color can be added - smooth dark spots and lines diluted white, mask well, if the snow cover is not solid.

As a rule, this type has a purely applied value - few chooses it for aesthetics of the car and self-expression. Most often it is in demand for hunters living in the northern regions of the country. Sometimes white camouflage use those who love to hunt in winter time, and to whom is not lazy to change the appearance of their car.

Winter camouflage

Hunting Civil Camouflage

For hunters, varieties of patterns have been developed that have nothing to do with the Militari style. It is a solid deciduous background of green or gray-yellow color. This option looks very stylish on jeeps - it seemed to be created for them. There are variants of a pattern that imitates the jungle, coniferous and deciduous forests, herbal coating of steppes and savannah.

This color looks very stylish and is at the same time an excellent disguise tool and a stylish design solution for car styling.

Painting Machines - Camouflage "Hunting"

Storm in the desert

One of the very common varieties is considered a pattern for the desert. Here prevails yellow color and different variations on his topic. Imitate sandy surface. It can be smooth transitions, lines and a digital pixel option.

This pattern is often used in the regions where there are sand deserts. You can make your car in such a style to harmoniously feel yourself in the context of the surrounding landscape.

Camouflage Auto "Storm in the Desert"

Type of varnishing

For varnishing machines with camouflage color, two types of varnish can be used:

• with glossy effect;
• with a matte effect.

If the camouflage color interests you in the applied sense, then glossy varnish is unequivocally suitable. Body gloss in no way contributes to an effective disguise. Therefore, if you are a hunter, fisherman or military, without thinking, use only a matte coating for your car.

If you are interested in the designer effect, rely on your taste. It all depends on your preferences and tastes. It is allowed both glossy shine and matte restraint. But if you want to create an image of a brutal amateur adventure, then the glossy varnish still stands to refuse.

Conclusion

Camouflage car can pursue various, sometimes completely opposite goals. This may be the desire to disguise the car in the conditions of hunting on a wild beast, for example. Or, on the contrary, the desire to stand out from the total mass, look cool and stylish.

On the one hand, the car blowing vinyl film under camouflage is a type of such a service in Avtovinyl, like vinylography, but on the other hand, the camouflage can be implemented and with the help of stickers cut on the plotter. The times when the cars were sailed into camouflage, hunters and fishermen have long passed. This trendy direction in Avtostailing takes at least the last place among other car blowing services. Auto-cell phone has not been associated with military equipment. It is safe to say that the camouflage depicted in the form of various shapes with sharp corners is currently becoming very popularity.

prices for pasting under camouflage

The exact cost of pasting in camouflage depends on:
• Camouflage design
• You have chosen type of execution (both complete pasting and separate stickers cut on the plotter)
• The filming manufacturer you have chosen
• Models of your car
• Year of release your car
• The original color of your car
• Availability of kites (cost of pasting more complex bumpers is negotiated)
• Car configuration (in one can be different lining, there is no)

The cost is indicated for the full pasting of the car in a typical camouflage (the one is in free access online or on sites like shutterstock.com)
The cost of exclusive design (including the full preparation of the print file) is for your car, given any of your wishes - from 10 000 r.
The cost of 5-pre-layout camouflage on your car - from 3 000 r. (the price will go to the cost of the finished layout in the event of your approval)

* The cost is for the manufacture of the original layout + printing on the Oracal film Orajet series 3951 + lamination of the Oracard 290 film + car blowing

Examples of car classification:
1 class: Audi A1, Audi A3, BMW 1 Series, BMW 2 Series, Mercedes-Benz A Class, Mercedes-Benz B Class, VW Golf
Grade 2: Audi A4, Audi A6, Audi Q3, Audi Q5, Audi A5, BMW 3 Series, BMW 4 Series, BMW 5 Series, BMW X3, Mercedes-Benz C Class, Mercedes-Benz E Class, Mercedes-Benz GLC, Lexus GS, Lexus NX
Grade 3: Audi A7, Audi A8, BMW 6 Series, BMW 7 Series, BMW X5, BMW X6, Mercedes-Benz CLS, Mercedes-Benz S Class, Mercedes-Benz GLS, Cadillac Escalade., Infiniti QX60, Land Rover. Range. Rover Vogue., Porsche Cayenne.

Our work

Full pasting Hummer H2
Camouflage film

Camouflage stickers
on Audi A4.

Full pasting Porsche Cayenne
Camouflage film

Full pasting UAZ Patriot
Camouflage film

Full Casting Cadillac SRX
Gray camouflage film

Full pasting Land Cruiser
200 camouflage film

Full pasting Nissan Armada
Winter camouflage film

BMW E63 trunk pastry
Gray camouflage film

Examples of camouflage design

why bold a car under camouflage

For what you need pasting machine camouflage film is guessed if not everyone, then many. She pursues quite understandable goals - make a car as bright and memorable as possible. Especially spectacular car pasting under the camouflage looks at SUVs. This is a great way to give your machine original, bright and stylish look. In addition, pasting cars under camouflage protects and retains native paint coating machine from dirt, dust, scratches and other damage.

Types of camouflage

camouflage Production Methods

which cars fit camouflage

Since the types of camouflage are currently a lot, you can confidently note that camouflage will be relevant to look at any car, including any type of body. Currently, the camouflage films are caught both supercars and SUVs. In fact, the most important thing is that the camouflage is original, for example, pixel or with sharp corners.

about Chinese camouflage

At the moment, there are a lot of options for the finished camouflage on the market, and with the most different variants of the drawings. It is worth noting that in 90% of cases, it is camouflage chinese production. Its primarily distinguishes not high quality manufacturing, namely - it is not suitable for complete car pasting, because The film from which it is made calendered, and not cast (type of film production). In other words, the film stretches, but then gives a very strong shrinkage (that is, striving back, to the original form). It is also worth noting that after dismantling this film, in 99% of cases on the entire area of \u200b\u200bthe car body, glue will remain, which is not so easy to remove. The Chinese camouflage film is primarily easy to recognize at the price - at the moment the price for 1 square meter. The meter ranges from 300 to 600 p., Plus, nothing on the substrate is either not written at all, or there will be a manufacturer's name - 5star.

Today, increasingly popular in the field automobile tuning It becomes such a direction like painting cars in camouflage. In this article, on the example of the UAZ, we will show how you can "disguise" the car do it yourself.

Necessary materials and tools

• aerosol paint in the canopy (4 cylinder cylinder black, brown and green colors), as well as vinyl film (depending on how the camouflage drawing will be applied to the car);
• lacquer with matte effect;
• polyrol with a sponge;
• solvent No. 469 (0.5 liters);
• gasoline (200 ml);
• special Paint Spatula (width 7 cm);
• pure flannel rag;
• halogen lamp with a capacity of 1 thousand watts;

  

  

• as many old newspapers as possible;
• paper greater tape (wide and narrow - 5 rolls).

Prepare cars to paint with your own hands

The best time to paint the car is summer, because warm weather and lack of humidity are the most optimal conditions for painting works. Paint car in camouflage is recommended in the garage or pure spacious boxing. The main thing is to completely eliminate such negative factorAs dust, and in the air and on the surface, otherwise the camouflage pattern may not be so attractive as I would like.



We rush the non-painted surfaces with a newspaper. Click on the photo to enlarge.

The preparation of the car is beginning with the fact that we put all the unknown areas with old newspapers. Confirm them on a wide greater scotch. Completely cover optics, glasses, door frames and sealing gum. If, upon completion of all the work, it turns out that the paint still got on one of these parts, carefully processed the fan with a solvent.

Then, we carry out degreasing the surface of the machine with a lobby cloth moistened in gasoline. The solvent is not recommended for these purposes, as it acts too aggressively and may not just clean the surface, but also damage the factory paintwork.

When you try to paint such a plot of paint from the canopy, the coating can get a "fur coat". If it still happened, we in the hands of a halogen lamp, heating the surface, and then completely remove the paint with a spatula. If this is not done, when re-applying the "fur coat" paint may appear again.

"We disguise" the car with the help of paints

You can answer the question differently how to paint the car in the "camouflage" color. Camouflage on the body of the car is drawn manually or using a stencil. The first method, of course, is preferable, because then the camouflage will look more natural. On the other hand, the use of the stencil will help save time. Let us dwell on the creation of the picture with your own hands.

The first color of the paint with which we have to work are black. The contours of the stains will be created using a narrow painting tape 2 cm wide. It goes well and allows you to create more smooth lines on the bodies. In addition, paper malarious tape is easily removed from the housing, without damaging the paint coating. Special attention should be paid to ensure that the tape is tightly imparted to the surface, without forming folds and chances in which paint can accumulate, otherwise the circuit may not be very neat.







The car will look more original if the stains do large, breathtaking different body elements. A protective "screen" of newspapers is formed along the contour of the spots. It will not allow us to paint black. After that, we apply for all spots to black paint from the canister. You can only start the stains of the stains of another color when the black spots are completely dried down. Dealer you have to paint some areas on the car body in brown, and then in green. Spots draw in the same way as before.

It is important that they are located to be a mustache: only so you can make camouflage solid. Each color paint is applied in two layers to ensure deep opaque color. This is especially true of green, as it is the brightest. If painting spots are moving from the right side clockwise, not forgetting about the roof and body racks.



View of the car after painting. Click on the photo to enlarge.


When the camouflage painting is completed and the pigment of all three colors will finally dry, all newspapers and tape are removed and move to the varnish car.

We propose to apply lacquer with a matte effect. Today, the "Soft Touch" type matte varnishes are very popular, which give the cover velvety texture. The technique of working with such compositions is no different from ordinary varnodes:

Immediately before applying, a solvent and the strengthener in the proportions specified on the package are added to the varnish. Often, these parameters are changed from the layer to the layer: for the lower - more liquid and flowing composition, for the finishing - more dense and concentrated.

However, if you do not have too much experience in this area, it is better to clearly follow the instructions of the manufacturer.

Varnish are applied in 2 - 3 layers and necessarily maintain some time for drying each. If, when touching the coating, the fingers are still adhered, but no longer lubricate varnish, you can begin to apply the next layer.

Create camouflage by car with a vinyl film

When painting a car in camouflage it is very convenient to use vinyl film. Of course, the total cost of painting will not change from this, but the process will go much faster. General scheme Work with vinyl film is as follows:

1. the film is cut into large slices in advance, in which the holes are made - this will be our spots.
2. the prepared vinyl cloth passes on the car, and those parts of the body that remained open, painted with a balloon in black.
3. similar procedure repeat with brown and green. Film-stencil for brown spots glue so that it partially overlapped black spots, and in the case of green - so that the stains are mounted on black and brown. Do not forget to spend a thorough drying of the pigment of each color!
4. when the entire body of the car will be painted, all the layers of the film are removed. If you are not satisfied with clear contours of spots, you can make a refinement with an airbrush.

Car owners note

Painting the car in the "camouflage" color is original, it will definitely be noticeably from afar. However, it is important here not to overdo it: the camouflage should take no more than 50% of the total area of \u200b\u200bthe car body, otherwise you risk being fined traffic police.