» »

Increase the road lumen Getz. Technical Specifications Hyundai Getz

13.07.2020

Clearance Hyundai Getz is the distance between the road and the lowest part of the car. To be more accurate, the clearance is considered, by factory standards, from the threshold vehicle to the road. Road clearance directly affects the aerodynamics of the car, as well as flowing.

Clearance

Height road Suit Hyundai Getz is 135 mm. But be attentive, leaving for rest or returning with purchases: The loader will lose 2-3 centimeters of the road lumen easily.

If you wish, the clearance of any car can be increasing with the help of spacers under the shock absorbers. The car will be higher. However, it will lose their former sustainability at high speeds and will greatly lose in maneuverability. Clearance can be reduced, for this, it is usually enough to replace regular shock absorbers on tuning: manageability and stability you will immediately delight.


Clearance Hyundai Getz. Restyling 2005, Hatchback, 1 generation

Hyundai Getz 2002 clearance, hatchback, 1 generation

1.1 Mt Basis135
1.1 MT GL.135
1.3 MT GLS135
1.5 CRDI MT GLS135
1.6 MT GLS.135
1.6 AT GLS.135

Traffic Increase Methods

Since, road surface on the territory of the CIS countries, mostly leaves much to be desired, pits yes bumps, then many goetc owners try to increase the height of the clearance to avoid damage to the protective elements of the body, such as bumpers and thresholds. You can do this in several ways. The most common is the installation of spacers or springs with shock absorbers. Consider both options.

Spacek

Spacers are rubber-metal pancakes that are inserted between the body and the shock absorber to increase the distance of the car's road lumen. These details of refinement can be gutz to break on car markets or in auto shops. Since the cost is much lower shock absorbers and springs, most motorists prefer to spacevas.

Consider the sequence of work for installation of spacers:

  1. We carry out the dismantling of the shock absorber rack along with all the components.
  2. We dismantle the metal cover that fixes the spring.
  3. We establish the spacer so that it becomes between two metal plates.
  4. Mount the fastening bolts, which then the rack will fix on the glass.
  5. Install the rack on the standard landing place.

Thus, it is possible to increase the ground clearance on Hyundai Getz by 10-15 mm.

Shock absorbers and springs

Another way to increase the ground clearance to Getz is the installation of high shock absorbers and springs. To do this, you will need to find a set of non-standard chassis for improving clearance. Usually motorists go to tuning shops or car market To buy this type of spare parts.

Installation is carried out with your own hands. Old parts are dismantled from the car, and new things are installed on an old planting place. So, you do not need to redo or customize. The only nuance can be a large fastener bolts that need to be cut after installation on the car.

Output

Clearance Hyundai Getz for all types of body one is 135 mm, according to the technical documentation provided by the manufacturer. So, to increase the ground clearance motorists use different methods. The most common is the installation of spacers.

Hyundai Getz - budget car Subcompact class, manufactured since 2002 to 2011 by the South Korean Motor Sports company Hyundai Motor Company. This is pretty inexpensive machinehaving good specifications. According to most motorists, lightweight, economical and safe Hyundai Getz has proven itself only with positive.

The only drawback is substantially low ground clearance. According to specifications, its clearance is 135 mm, and with the cease protection, this distance becomes even smaller (by 20 mm). In numerous forums, people write reviews that such low clearance Hyundai Getz makes it difficult to move on a broken asphalt with deep pits and country roads.

It is especially difficult to owners of this motor vehicle In winter, when a lot of high land on the roads and snow. Often hyundai owners Getz resort to an increase in the distance between the surface of the road and the bottom of the machine (lifting). An exception is only a limited Hyundai Getz Cross series with a higher road lumen. To understand ways to increase, first need to understand what is clearance and what it affects.

Car lumen distance

Motor vehicle clearance - a fairly significant technical characteristic, to which it is important to pay attention when choosing a brand of machine. Clearance is the interval between the surface of the road and the central part of the car, its lower point. This distance under the bumper and the crankcase pallet may be the same. As a rule, in the technical specifications, the clearance is indicated in millimeters and varies according to the following types of motor vehicles:

  1. Clearance under the bumper:
  • passenger car - from 140 to 200 mm;
  • crossover (PART) - from 180 to 250 mm;
  • sUV - from 200 to 350 mm.

  1. Clearance under the pallet of the crankcase:
  • passenger car - from 120 to 170 mm;
  • crossover (PARKTER) - from 170 to 210 mm;
  • sUV - from 200 mm and higher.

Road clearance does not directly affect the passability of the machine and almost in each can be adjusted. But in any case, if it becomes necessary to increase it or reduce Hyundai, it is better to turn to experienced specialists. This is due to the fact that its incorrect increase can significantly reduce the wheel drive resource. Also, such a change in the distance of the road lumen increases the risk of problems with the controllability of the machine, reduce its stability. In addition, you should always keep in mind that lovers fast driving Recommended reduced lumen distance.

Clearance increase Hyundai Getz

First, it is necessary to pay attention to the description of the increase in the distance between the expensive and the bottom of the machine from the manufacturer, where they usually indicate what actions can be increased by Hyundai Getz Road clearance. One of the most common ways of such an increase in Hyundai Getz is to replace the wheels. To do this, select more radius discs and the corresponding tires. This method is considered the easiest and less efficient.

Wheel replacement is better to produce if there are direct recommendations from the manufacturer. Can help and upgrade the running part of Hyundai Getz. For this, plastic, aluminum or polyurethane spacers are placed between the shock absorber's turns. The distance of the road lumen can be increased by changing the interval between the supports of the car and the body itself. Thus, it is possible to increase the segment of the lumen on average up to 30 mm.

Of all these methods, the replacement of the wheel gives only the most minor result. Attempt to make Hyundai Getz's lifting can be, the main thing is to achieve the maximum result and do it in the car repair shop. It is necessary that experienced professionals can check and make the necessary adjustment of the road safety machine after lifting.

Consequences of channery change

It must be remembered that the car lifting can lead to poor consequences, better without serious reason not to acquire a car with a small road lumen. For example, when replacing the wheels, it is important to pay attention to the arches so that they then did not hurt the body. When installing the spacer in the turns of the shock absorber, Hyundai Getz Road clearance will become more, but problems such as a decrease in its working stroke can occur, increasing the stiffness of the suspension.

An increase in the distance between the supports and the body can significantly affect the car handling. When deciding whether to increase the size of the road lumen is extremely important to weigh all the risks associated with the further movement of the vehicle on the roads. All manipulations in this area, especially in the absence of recommendations from the manufacturer, can reduce the overall safety of the car.

In particular, such changes can shift the center of mass of the car and cause malfunctions in brake systemthat is quite dangerous. Owner this car It must be borne in mind that an increase in the distance between the expensive and the bottom of the machine can only be safe up to 15 mm and not only in the case of Hyundai Getz, but also in every car.

I will not cut a lot, I will tell you short and specifically, without soap operas.

GETZ - the machine is good, but has a number of its drawbacks along with positive qualities. I purchased a car in the summer of 2008 and at the moment (20.10.09) I wrapped 30000 km - it is necessary to go, the GETZ 1.6 package. Everything is in order, the car is absolutely on the go, but there was one warranty repair - the sensor was failed, which is responsible for automatic speed switching. Two days went on the third all the time, and then passed to the service. Repaired by all guarantees, but an important fact for the reader of this review will be the words of the warranty repair manager in the official salon: "... You know, it happens to many genets, it is a factory marriage, we are often treated with this breakdown ..." . In the rest of the car for the year of ride any wild and serious complaints.

From shortcomings:

Of course, "crickets" appeared - the plastic interior is affected, the torpedo squeezes, the door is the right front and something from behind, and could not reveal that.

Hard suspension, it is good when the turn is completely feeling (you often feel often, I drove a lot of 120-140 km / h, the benefit of the track allows), but still I would like more compensation for Ughabs and Koldybin, and if droves with "Khrenovo" Moving, then you will actually collapse and shakes. So, when choosing this car, go to the test drive and ride on the rails, immediately decide - so you need or not.

Noise insulation lame, with high speed in the cabin there is a hum, loud music of course everything fixes.

Now about music: I don't have the most authoritative tape recorder, but still the volume and bass gives normal, and these are the most basses so really plastic on the door (in the door of the column), which now began the rattling of plastic on the door when playing. In short, who loves R "N" B, electronic music and other bands-compositions - get ready for outside sounds.

Now a little about high-speed behavior: at the start of GETZ 1.6 automatic transmission, of course, it is good, up to 90 km / h rusted perfectly with an active press on the gay, but further silenks ends, all the incision stops at 100 km / h, sharp rebuildings and overtaking on Such a speed should be done well prepared and thinking, and the button reduction button (and there is also such) here is not particularly effective.

The trunk "Pipetz" as a little, you can drive to hypermarkets, but, for example, during the winter wheels I traveled and the pair of wheels had to be covered in the salon. Well, as they say, the car is not intended for large-scale transport.

Consumption: I drove constantly from the Moscow region to Moscow (~ 45 km one way), there are a route and traffic jams along the way, with all this consumption of 9.3 liters / 100 km. Here is such a small machine !!! I do not know if it is understood, it is hindya or an automatic so hawts, but a fact with such consumption on the face.

The rear janitor is not very thought out - his mode of operation is one and it is not with a delay, but with the constant movement of the janitor. Personally, I would like him to move with a delay, with quick.

Of the advantages:

Small dimensions: Parking anywhere, and the main reversal can be done on such small areas, which already captures the spirit;

Decent clearance (road clearance). I can climb on decent bardures, I even surprised me, I thought it would be worse. There are, of course, the protection of Carter is chirkay, but this is when I am completely impudent with a height. In the village and on the river, all the bumps were conquered;

The distance for feet at the rear passengers is normal, of course, it is not possible to stretch, but also to sit, put the ears with your knees, do not have to;

Comfortable shelf at the wheel, there is a flow of unnecessaries, Wow ...;

When the air conditioner is turned on, the power drops, but the car still remains a maneuverable surgery. By the way, it also applies to the full cabin when 5 people sits in the car. It is not particularly convenient to sit in a feather (as in many cars), but does not lose cars in maneuverability.

Well, in general, probably so. If we evaluate the price / quality, then the car has a solid five. The cost of the car corresponds to the shortcomings that are available. Most of them do not particularly strain, but there are some that I would like to exclude (I personally do not like - a tough suspension and rear janitor). 30000 km is a tangible mileage for a car of this class and, as they say, she has not yet pumped up (with the exception of the factory marriage, but there are such in the top car). Personal opinion is satisfied, although the car was bought with the calculation of his wife. I go myself and with pleasure.

Hyundai Getz - the product of the South Korean automotive industry Hyundai Motor Company, manufactured by it from 2002 to 2011 (after it changed Subcompact Solaris). Recognized "Car of the Year in Russia" 2005. What qualities contributed to this? Consider the main technical characteristics of Hyundai Getz.

Dimensions.

  • Auto length, in mm: 3825.
  • Width of the car, in mm: 1665.
  • The height of the car, in mm: 1490.
  • Wheel base, in mm: 2455.
  • Clearance, in mm: 135.
  • The volume of the trunk, in l: maximum 977.

Body.

  • Type: Hatchback.
  • Number of doors: 3 or 5.
  • Number seating: 4 or 5.

Engine and related characteristics.

Manufacturers have endowed Hyundai Getz 4 Motor Options: Three Gasoline and One Diesel. The last in the Russian Federation was officially not supplied. Therefore, we will only talk about the first. By the way, up to 2005 ruler power aggregates Motors were made, volumes 1.1, 1.3 and 1.6, and after 2005 - 1.1, 1.4, 1.6.

1.1 SOHC.

  • Fuel type: 95th gasoline.
  • Power, in hp: 66.
  • Number of valves: 12.
  • Working volume, in ccm.: 1086.
  • Type of conjugated checkpoint: mechanical, 5-speed.
  • Emission level in the atmosphere CO2, in gr. at km: 130.
  • Curb weight, kg: 1150.
  • Fuel consumption city / highway / average, in liters per 100 km: 6.9 / 4.7 / 5.5, respectively.
  • Limit speed, in km per hour: 154.
  • Overclocking time to "hundreds", in sec.: 15.6.

1.4 SOHC.

  • Fuel type: 95th gasoline.
  • Power, in hp: 97.
  • Number of valves: 16.
  • Working volume, in cubic meters: 1399.
  • Type of conjugated PPC: 5MCPP or 4ACP.
  • Emission level in the atmosphere CO2, in gr. At km: 149 (for "mechanics") or 157 (for the "automaton").
  • Curb weight, kg: 1175.
  • Fuel consumption city / highway / average, in liters per 100 km: 7.4 / 5.0 / 6.3 (for mechanics) or 9.1 / 5.0 / 6.6 (for automaton).
  • The limit speed, in km per hour: 195 (for "mechanics") or 167 (for the "machine").
  • Overclocking time to "hundreds", in sec.: 11.2 (for an option with manual transmission) or 13.9 (for option with automatic transmission).

1.6 DOHC.

  • Fuel type: 95th gasoline.
  • Power, in hp: 106.
  • Number of valves: 16.
  • Working volume, in ccm.: 1599.
  • Type of associated checkpoint: Mechanical, 5-speed, or automatic, 4-speed.
  • Emission level in the atmosphere CO2, in gr. at km: 145 (for "mechanics") or 167 (for "automaton").
  • Curb weight, kg: 1200.
  • Fuel consumption city / highway / average, in liters per 100 km: 7.6 / 5.1 / 6.1 (for mechanics) or 9.2 / 5.3 / 7.0 (for automaton).
  • The limit speed, in km per hour: 180 (for "mechanics") or 170 (for the "machine").
  • Overclocking time to "hundreds", in sec.: 9.6 (for an option with manual transmission) or 11.9 (for option with automatic transmission).

Chassis.

  • Front brakes / rear: disk / drum.
  • Front / rear suspension: independent / semi-dependent beam.

Other specifications.

  • The minimum reversal diameter, in M: 10.
  • Environmental Standard: Euro4.
  • Fuel tank per 45 liters.
  • Steering: with a hydraulic.
  • Drive: Front.

Road clearance of Hyundai Getz or Clearance, as well as for any other a passenger car It is an important factor on our roads. It is the state of the road surface or its complete absence forces Russian motorists to be interested in Hyundai Getz clearance and the possibility of increasing the road lumen with the help of spacer.

To begin with, it is necessary to honestly say that real clearance Hyundai Getz It can be seriously different from the manufacturer's declared. The whole secret in the method of measurement and place of measuring the road lumen. Therefore, it is possible to find out the real state of affairs only by armed with a roulette or ruler. Official clearance of Hyundai Getz The only thing is 135 mm. Saves position only the compact dimensions of the car itself and small sinks in front and rear.

Some manufacturers go to the trick and declare the size of the road lumen in the "empty" car, however real life We have a complete trunk of all kinds of things, passengers and driver. That is, the clien's loaded car will be completely different. Another factor that has few people in mind is the age of the car and wear of the springs of their "seeding" from old age. The question is solved by installing new springs or purchase of spacers under spring Springs Hyundai Getz. Spacers allow you to compensate for the singer of the springs and will add a pair of centimeters of the road lumen. Sometimes even a centimeter in the parking lot at the border plays an important role.

But it is not necessary to get involved in the "elevator" of the road lumen Hyundai Getz, because spacers for increasing clearance are focused only on the springs. If you do not pay attention to shock absorbers, the course of which is often very limited, then independent modernization of the suspension can lead to the loss of controllability and damage to the shock absorbers. From the point of view of the passability, the big road clearance in our harsh conditions is good, but at high speeds on the track and in turning there appears a serious routine and additional casual rolls.

To increase the road lumen on Hyundai Getz, use spacers for spring (or elongated springs), and the so-called "houses" or "heels" are used to compensate for the length of the shock absorber string. This metal spacer allows you to raise rear shock absorber a little higher. What a homemade spacer looks like Hyundai Getz can be viewed in the following photo.

There is even a video.

As a result, it turns out quite a decent road clearance. We look at the result of the suspension elevator below in the photo.

Any car manufacturer when designing suspension and choosing a clearance value is looking for golden middle Between handling and passability. Perhaps the easiest, safe and simple way to increase the clearance, it is to install wheels with "high" rubber. Wheel change makes it easy to increase ground clearance on a centimeter of another. Do not forget that a serious change in clearance can damage the Hyundai Getz shrus. After all, "grenades" will have to work a little under a different angle. But this concerns only the front axle. Behind it is worth paying attention to the length of the brake hoses.