What is the best camera to choose for a car. Pinout wire rear view chambers

For many people who have recently bought a car, a stereotype has formed: the DVR is the only mandatory solution to the purchase, which is able to ensure traffic safety. Rear view cameras are devices that provide safety when parking. From the quality of the image, the safety of riding by car, especially in major cities, is directly dependent. In the ranking below you will see a selection of the most interesting solutions in this segment.

Best Curvage Cameras Rear View

Rear view cameras - inexpensive devices that can save the car from damage during parking and in a dense stream of machines. Not all auto models have such an option that the whole segment of mortise cameras has generated. It is this type of device that is easiest to be fixed, they minimally perform over the surface and at the same time significantly expand the driver's visibility zone. The chambers themselves differ in many parameters: the type of matrix, analog and digital image resolution and light sensitivity.

4 XPX T204-1.

Best price category
Country: China
The average price: 820 rubles.
Rating (2019): 4.4

The rear view camera has an angle of view of 150 °, which, taking into account its price, is a very high indicator. The equipment broadcasts the image in analog standard PAL and NTSC, and in the first case, the resolution of the picture is larger, and is 752x582 pixels with a diagonal resolution of 420 TV.

The presence of parking markup involves the placement of the device in the center of the car. Most often, the equipment is embedded into the bumper at the level of parking sensors (if any). In addition, the rear view camera XPX T204-1 retains its performance at temperatures. ambient not lower than -40 ° C. In the night operation, a diode backlight is used, complementing the lighting of the standard reverse lamp.

3 AUTOEXPERT VC-214 (393348)

Good quality analog signal
Country: China
Average price: 1 550 rub.
Rating (2019): 4.5

For those who do not want to spend on the purchase of a rear-type camera more than three thousand rubles, there is also a solution - AutoExpert VC-214. This camera offers almost the same set of benefits for its users, but it is twice as cheaper than flagship solutions.

The main element of the device is a matrix made using CMOS technology. Its resolution is almost a record device for this class - 648x488. In analog format, this indicator is 420 TV (television lines). The ratio of signal and noise is also on high level and is 45 decibels.

A small minus device is relatively low photosensitivity - 0.6 suite. In practice, it will turn into an insufficiently contrasting picture when using the camera on unlit parking and roads. But the difference is not so striking as it seems: with a limited budget, AUTOEXPERT VC-214 will fully justify the means spent on it.

2 Incar VDC-002 (408002)

The largest matrix
Country: China
The average price: 2 200 rubles.
Rating (2019): 4.6

INCAR VDC-002 - a camera with a standard mortise construction, which is also located in the price range of up to 4 thousand rubles. It uses a high-quality CMOS sensor with a resolution of 628x582 - on this indicator, it bypass on the market of all its competitors. A large 1/3 inches matrix captures a lot of light. In practice, it provides good visibility and high contrast of the image both during the day and night.

The mortise design facilitates the installation process - it is this method of installation that most producers are used in the market. A small minus is the lack of configuring image modes: only a mirror is available to the user. There are no accessories for the camera either - most of them will not be needed, but still additional options could add a pair of points to the device's piggy bank.

The combination of characteristics makes the camera one of the best on the market. High clarity Images plays a decisive role when operating the device - in this parameter Incar VDC-002 simply has no analogues.

1 AVIS 311CPR (433954)

High photosensitivity
Country: China
The average price: 2 900 rubles.
Rating (2019): 4.7

This rear view camera is a rating leader due to the matrix, which is made using CCD technology. It provides the highest light sensitivity - the image quality at the camera is much higher than that of the analogs with the CMOS sensor. Permits in 512x492 points (or 420 TVL) is sufficient to obtain a high-quality picture.

This camera is the only rating with direct and mirror display modes in the viewfinder - most of the models can only boast the last. The minimum lighting at which the 311CPR model works is 0.1 Suite - even in the complete darkness of the objects of objects will be easily distinguishable.

Auto owners reviews also confirm: this camera is the best in its segment. Even small inconveniences associated with non-standard screw design, do not cross its main advantage - the highest image quality in all conditions. Do not forget about accessories that can be purchased for AVIC models.

The best overhead rear view cameras

Rear view challenge is the best possible to protect your car during parking. Its remote design allows you to directly evaluate the distance between the obstacle and the bumper. This allows you to put a car with an accuracy of several centimeters, avoiding even minimal damage. Another advantage of such cameras is universality: they can be installed almost any car.

4 SWAT VDC-007 C

The most reliable mount. Good photosensitivity
Country Russia
The average price: 1 900 rubles.
Rating (2019): 4.2

High sensitivity of color (NTSC) camera provides sufficient visibility at night when lighting the way with a standard car light. The device has a reliable fastening, however, it takes a small one for its placement. through hole. For this reason, many owners often install the chamber directly on the lights of the backlight of the car number.

A wide review (170 °) and the trajectory of parking markups provide excellent visual control when driving, which gives the driver additional confidence in its actions. At the same time, the parking lines displayed on the screen can be turned off, which allows you to get the correct image when installing the rear view camera not only in the center, but also in any other, most suitable for this place (under the bumper or in the trunk lid). The housing of the rear view camera is completely sealed, which ensures reliable operation of the device, regardless of external factors.

3 Garmin BC 30

Multifunctionality. Fast installation
Country: China
The average price: 21 230 rubles.
Rating (2019): 4.5

The solution from Garmin is the most functional of the ranking. A large set of features will allow you to put the car accurately and easily. This is possible thanks to parking labels - lines that are superimposed on the device screen and show exactly where the driver is worth stopping the car. Also at the camera is the best moisture protection among those represented - it supports the IPX7 standard.

From the technical point of view, the camera from Garmin is far from the flagship of its segment. The maximum shooting resolution is limited to a modest indicator of 640x480 pixels. The viewing angles are also quite small - only 140 degrees. The 1/3 inches matrix shows well in the dark, but does not compensate for the lack of permission. By the price ratio and the proposed characteristics, the model is still inferior to the two devices described above.

2 AMP MA-108A

The best ratio of price and quality
Country: Poland.
Average price: 870 rub.
Rating (2019): 4.7

AMP model is a strong alternative to flagship devices. The first distinguishing quality of the device is certification according to the IP68 standard, that is, the actual resistance to immersion in water and from dust. Also this model It is the only rankings in which the CCD matrix is \u200b\u200binstalled. Thanks to this (and relatively large size of 1/3 inches), it has the best photosensitivity from the rating presented - the trigger threshold is 1 suite.

There is support for both chroma systems (PAL and NTSC). A wide-angle lens is also installed in the chamber: the viewing angle is 170 degrees. The only drawback of the model is a low resolution: 765x504 points or 420 television lines. It was this parameter that did not allow her to take the first place in the ranking. At the current price, MA-108A is a worthy alternative to flagship devices.

1 Alpine HCE-C200R

High image quality. The widest corner of the capture
Country: Japan
Average price: 19 800 rub.
Rating (2019): 4.8

Alpine has long proven itself as a manufacturer of flagship automotive electronics. Its camera has a better matrix for all indicators: the shooting resolution is 1280x960 pixels. In analog format, this indicator is 300 TVL, which is also sufficient to obtain a clear and contrast picture.

Also at the model, the maximum viewing angle (185 degrees) and minimum level Noise (40 dB). The minimum luminance threshold is 2 suites - the cause of this was the extremely small size of the matrix (1 / 3.8 inches). Included in the set there is a remote control. The device can automatically adjust the brightness and balance of white - other solutions do not know how to adjust these indicators under the driver. It is also impossible not to note the compactness of the device: the camera is less than almost any model in its segment. Reviews also unconditionally give the championship of the model from Alpine.

Video - How Alpine HCE-C200R works

Top Rear View Cameras: Setting on the license plate frame

The rear view camera can be installed on the license plate frame. These devices are much more compact with their analogues and allow you to disguise it from prying eyes. Problems may occur only at the fixing stage - the number of their species is very large.

4 BlackView UC-77 Black LED

Good visibility in the dark
Country: China
The average price: 1 700 rubles.
Rating (2019): 4.4

LED backlight installed in this chamber allows you to get a picture of excellent quality even at night. The image is transmitted mirror and fully matches the reflection in the mirror. Also for convenience there are colored parking lines that demonstrate the trajectory of the movement of the car allowing the driver to more accurately navigate.

The rear view camera is completely sealed and has a pretty durable case. When installed, it is possible to configure the camera position relative to the horizontal line, depending on where the frame is installed (the trunk lid or bumper). This allows you to use UC-77 Black in any car, including cargo transport.

3 PRIME-X RMCM-19

Best price
Country: China
The average price: 990 rubles.
Rating (2019): 4.4

Numerous positive reviews led to the fact that this rear-view camera was also in the ranking. She is the cheapest representative of its segment, although their difference with the MCM-07 model is about a thousand rubles. The chamber has very decent photosensitivity - it works when lighting in 0.2 suites. In this case, the CCD matrix is \u200b\u200binstalled in it, the shooting resolution of which is 648 to 488 points. The ratio of signal and noise in it is not close to the indicators of flagship models - 48 dB. Parking labels here are also available, as well as moisture protection of an unknown standard.

Big Plus: Here the manufacturer still chose a mirror image display. The viewing angle is 170 degrees, which will be enough for comfortable parking.

2 SHO-ME CA-6184LED

High quality pictures
Country: China
The average price: 1 260 rubles.
Rating (2019): 4.6

The camera transmits an analog signal in PAL or NTSC format to the head. A sufficient viewing depth for secure parking provides built-in LED backlight. In addition, the image is superimposed by a parking pattern of the car movement path, which greatly facilitates control (when driving back) drivers with small experience. The camera is not widescreen, but, nevertheless, the viewing angle allows you to control the location of external objects at a distance of at least a meter from the edge of the car.

Video equipment integrated into the frame for the number and can be installed on any vehicle. If the device location is not in the center of the car, parking lines can be turned off. At the same time, the height of the location of the frame for a high-quality review should be not lower than 50 cm from the surface of the road.

1 AVS345CPR

Excellent quality night image. Adjusting angle view
Country: China
The average price: 2 500 rubles.
Rating (2019): 4.8

To install the device, it is sufficient to simply change the number frame car number. The power is connected to the backlight of the reverse, and the video signal through the CVBS connector to the video input of any broadcasting equipment that has the support for the color image NTSC. Infrared illumination provides good visibility when using the camera at night.

AVS345CPR supports performance at temperatures from - 30 ° C to 50 ° C, has a fully sealed housing, as well as an adjustable angle horizontally. This allows you to correctly use the static markup of the trajectory of the movement, which is superimposed on the translated picture. With its help, parking is greatly simplified that for drivers with small experience matters.

The best premium rear view cameras

If you need a premium rear view camera - it is worth paying attention to the benefit of the overhead solutions. Such devices make it possible to park the car in any weather: they have the highest quality image and have extremely complete functionality.

3 CarMedia CM-7520C Night Vision

High quality video signal. Simple installation
Country: Russia (produced in China)
The average price: 2 000 rubles.
Rating (2019): 4.5

This rear view camera is suitable for many cars from model Row Volkswagen and Skoda. It is mounted instead of the full-time cloth of the numbers, which allows you to install equipment without structural changes in the body (no additional holes are required for removal of wire and fixation), while maintaining the ceiling. The wide viewing angle allows you to control the situation behind the car across the entire width of the bumper.

The camera transmits an analog signal (PAL / NTSC) with a high resolution of 520 TV. Together with diode backlight It provides good review in nighttime. Static parking lines helping when driving reversemay be disabled if necessary.

2 Gazer CC207.

Best permission
Country: Taiwan
The average price: 4 130 rubles.
Rating (2019): 4.7

The camera allows you to control the space behind the car during the movement by reverse. Wide-angle lens (170 °) provides good visibility, And the static markup of the trajectory of the movement allows the driver to act more confident. Low level The noise of the signal gives a picture with a high contrast and resolution of 500 TVL (in NTSC format). With this quality of the image of the standard backlight lamp is quite enough for confident operation of the chamber (the lighting intensity above 0.1 lux is provided good visibility).

Reliable fastening allows you to install the camera where the owner wants it. For convenience, you can purchase transition mounts for different models cars that are made in the form of a lizard illumination beam and have an adapted planting place. Reliable fastening and waterproof case provide long-term operation of the equipment.

1 Alpine HCE-C2600FD

The widest corner of the review. MultiView Picture Processing
Country: Japan
The average price: 17 390 rubles.
Rating (2019): 5.0

The leading position of the rating in this category is occupied by the camera of the Alpine automotive electronics brand market. It has a whole number of advantages that justify enough high cost equipment. The high-quality widescreen image (the horizontal viewing angle is 180 °, vertically - 70 °) allows you to implement the innovative MultiView technology, allowing you to broadcast different image processing modes:

• Demonstrates a wider viewing angle;
• Broadcasts two separate images of the left and right side spaces in front of the rear bumper;
• The top view allows you to most accurately perform parking maneuver.

Using the HCE-C2600FD camera to broadcast the type behind the car significantly reduces the likelihood of collisions, even if the wheel is a poorly sprinkable driver.

Rear view camera Usually image of a mirror. And most such cameras. If you want to purchase a chamber to control the front hemisphere, then your choice is significantly narrowed. Under the knife, let's try to fix this annoying circumstance.

The camera comes in a cardboard box, the package is the most complete:
- camera
- Manual
- Nut fastening
- shielded video signal
- power wire with voltage converter
- Two pieces of bilateral scotch
- Crown for drilling hole

Study of the description does not greatly add information - the description is one on a large family family and specifications Specifically, your camera must be lit when the box is completed. But they are not marked.

Let's refer to the store's site:

Effective Pixel: 420 TV Lines
Lens Angle: 170 Degrees Wide Angle
TV System: Pal / NTSC
POWER SUPPLY: DC 12V
Support NTSC Video System

So the camera looks outside:

The diameter of the thread is 17.5 mm.

Crown with a margin of 1 mm.

Nut turnkey 22. It is a little more of this size, so you may have to take an adjustable key.

The length of the thread is such that throwing the nut and make at least one and a half turnover, if the wall thickness in which the hole is drilled, not more than 8 mm.

The rear camera of the camera is attached to four self-tales. We develop:

Inside the housing is composed by a compound. He sensates like loose rubber. Copy.

Managed to do before the board. Time for this went about 15 minutes, the tool is a scalpel, an acute screwdriver and a cotton wand with alcohol. Lucky. This camera allows you to control the image.

Contact sites are left on the board and even the value of the conclusions is signed. You can turn the image, you can turn on / off the cleaning, you can turn on and off the lines. Even on the board there are non-sprinkled SMD components that can switch the PAL-NTSC mode. In practice, the number of lines in the frame is changing and a little become brighter or dim color. There, on the board, there is a place to connect the wire + 5V and the free space, apparently for the installation of a tiny converter 5 -\u003e 3.3 V.

Yes, the camera is powered by a 3.3 volt voltage. For its preparation on the power, a stepdown converter is installed 12-3.3. Current on the chain of 12V with times up to 120 mA, but mostly about 80. The converter heats a little, the hand of course suffers even with a long work, but he is still warm. I decided for a long time the camera was turned on not to leave.

For the experiments, I had to connect the camera to the TV-tuner built into the computer, it has a low-frequency tulip entrance. Immediately began to show a picture, the truth is slightly awesome. This makes itself felt either noises for nutrition, or interference inside the systemizer. I soldered wiring to the contact pads to be able to change the camera settings without opening the housing. I have not forgotten to bring the outside and wires of land and nutrition, it is necessary to climb the control wires on them.

Then he took a neutral silicone sealant and thoroughly smeared the fee.

Returned the lid in place.

Let's see what we did.

When the coup with the wire is closed to + 3.3V, the camera turns the image. The remaining two wires are triggered by closing to the ground. Here's what it looks like:

Let's try to estimate the viewing angles:

A ruler at a distance of 12.5 cm from the camera in the area of \u200b\u200bits center is visible at a length of 25 cm.

No need to be Euclide to guess the viewing angle - 90 degrees horizontally. With the aspect ratio of the frame 4: 3 vertically, we obtain 67 degrees.

This is noticeably different from the declared 170. Perhaps 170 is diagonally? No, I had 107 degrees diagonally.

The chamber itself is rejected from the plane of the installation by 50 degrees.

Thus, the review sector does not reach the plane of the part on which the camera will be installed.

We start the installation. I will put on the front of the car, instead of an unnecessary logo. Rear camera I already have, there is a monitor, so the work will be simple. Pretending the installation location:

Drills Hole:

Insert the camera and screw the nut. Wires are insulated with heat shrink.

Ready. It should be later drowning the holes of the logo.

That's how it looks like.

But it looks like a salon:

From the lower edge of the frame to the number of about 8-10 cm, so as soon as someone else's bumper reached Niza, it's time to harm on the brake.

The camera works, the price is low, the picture is good, no noise when installing there is no no. Current consumption of about 80mA. The tightness was complete (I hope, after my intervention, it will remain). A relatively easy to adapt this chamber for their needs if you have specific. The manufacturer laid the ability to settings. By cons, I can attribute the viewing angle less than the stated and small (really small) heat of the power supply.

The camera will help on close parking, it will allow you to see the scooter abandoned before the bumper, or the installed concrete half factor. In winter, it is easy to clear it from ice and slowly steer around the yard, looking at her until the main glass thaws.

The goods are provided for writing a survey shop. The review is published in accordance with paragraph 18 of the site rules.

I plan to buy +39. Add to favourites I liked the review +79 +134

Car parking always requires special care. But if you are a driver with a little driving experience, then you probably give you the parking lot. Often, many are resorting to the help of third parties that will help adjust your actions during parking. But if there are no, and are you alone? For this, car manufacturers specifically produce rear view cameras that are attached to your car and connect to any device to output received from the camera to the screen.

To date, you can meet various models, but to make a choice, you need to navigate in the basic characteristics of the rear view cameras.

In this review, I will tell you what to pay attention to when buying this type of devices.

When buying a rear view camera, you need to stick to a small list of step-by-step actions when choosing.

1) Since many motorists appreciate and love appearance His car, big and main question when choosing a camera is its place of installation and the method of fastening to the car. Think in advance what the camera is suitable for these characteristics.

2) the second question that should be worried where the images from the camera will be displayed? Will this standard magnetol with video input, portable external player or separate built-in monitor?

3) Next, you should decide which way you will organize the "transport" image stream from the camera to the screen. Will this standard wired gasket or wireless transmission ...

4) Only after you have decided on all three points, you can proceed to the "screening" of the proposed options for the main technical specifications: the type of matrix, the viewing angles, minimum illumination, the color system, IR-contrast, the presence of parking lines and IP protection.

Rear View Camera Type

Each rear view camera varies by the method of fastening and its installation site. It is customary to distinguish between four types of constructive design of the chambers of the rear view, namely:

Fortial rear view camera

A similar type of camera is mounted on a regular vehicle location, such devices manufactures the factory manufacturer, and the camera has a "hidden" installation (do not rush).

Some manufacturers produce rear view cameras that are mounted on the place of the lighting sign lighting place, while the backlight is not disturbed, as it is provided in the camera design. Similar cameras are not available on all car brands.

Rear-line

To install such a type of cameras, it is necessary to drill in advance the technological hole for its installation. Fixation is made using latch or lock nut.

Camera mounted in a number frame

Common type among motorists, as a miniature chamber is located in the center of the center. This frame is often suitable for installation in almost any car.

Universal Rear View Camera

The type is due to a simple design, due to which the camera can be installed on any machine at any suitable place. To secure such a camera to the car body, you need to use or sticky tape, or drill a hole in the housing and secure on bolts with nuts or screws.

Image output and video standard

Choosing a chamber of the rear view on the car, you need to think over in advance where you will connect it. To date, there can be several ways to output pictures:

1) Image output to the monitor. The monitor can be built into the rearview mirror, built into the onboard panel or in the sunscreen visor;
2) Conclusion of the image on the screen of the standard magnetic with video input;
3) withdrawal to the portable media player.

If you have in your car full monitorThis will facilitate the conclusion of the image, since in the absence of such an option, you must purchase the desired accessory to your car.

One way or another, the requirements for monitors are one. The most important thing is that the device supports the NTSC or PAL TV signal. This standard affects the selection of the camera as the supported monitor standard may not be compatible with the camera standard.

Method of video transmission

In total there are two ways to transfer video from the camera.

1) Standard wired connection is carried out using a cable from the rear to the monitor. This transmission method pulls a number additional action By dismantling the trim and cable laying inside the car cabin. The quality of the picture in this case will be good, plus this method is reliable.

2) Wireless Connection is carried out using additional auxiliary receiving devices that are located at the camera from the back of the car and near the monitor. This method of video transmission is more suitable for navigators or portable media players. For monitors having an excitation wire, this method is not suitable. When transmitting the video signal, interference may occur in the form of "snow" on the monitor.

Type of camera matrix

CMOS and CCD are two types of matrices that are used in the rear view cameras. Each type converts the image into a digital signal according to its own technology. But one type of matrix is \u200b\u200blower in price, the other is better in terms of signal conversion.

Infrared illumination is not found in all camera models. If you speak clean, then in the case of the rear view cameras, the LED backlight is not effective. Using a light sensor built into the chamber, automatically turn on and off the backlight at the desired point in time. Ineffectiveness lies in the fact that with an insufficient number of light, the color chamber becomes black and white. So think do you need such an option in the chamber or not? After all, the reverse lights are capable of providing quite suitable lighting.

Standard protection

The rear view camera is susceptible to the hard mode of operation, which is why the security standard is an integral component. In the chambers you can find the degree of protection as IP 66 and IP 67 and IP 68. The first digit of the defense standard is responsible for protection against dust, the second from moisture. The highest defense rate for IP 68 is such a camera as maximally protected from dust and moisture.

It is also important to also pay attention to the operating temperature range. In our country, this parameter is particularly important, as the differences depending on the localization and time of the year can be significant. That is why it is necessary that the camera can work at any time of the year at any temperatures. The most minimal value that was personally managed to capture in practice, -40 ° C. Despite the fact that the manufacturer has declared the minimum working temperature -25 ° C.

The only thing for what else is worth paying attention is the nutrition of the camera, often the power should not exceed 14 V, and in case the car has a side network is designed for 24 V, it is necessary to resort to the help of lowering inverters.

A pre-thought-out selection of the rear view camera is 100% successful purchase. Since the "Right" camera plays an important role in the life of your car. And you will be more convenient to be placed many times and maneuver with reversing with the camera.

Price criteria

Having studied all the proposed information, it's time to estimate your financial capabilities.

Up to 2000 rubles are available universal and mortise chambers, with an angle of view up to 170 degrees. The main type of matrix of such models is CMOS, and the IP66-67 security standard.

From 2000 to 3000 rubles, cameras both mortise and universal, as well as mounted numbered signs and different colors are available. These models can already meet models with a CCD type matrix. But the degree of protection of cameras is basically IP67.

Models of various types of cameras are available from 3000 rubles, more expensive models have large viewing angles, and practically similar specifications with the previous price category. Therefore, this case is an example of when you should not overpay an extra couple of thousand rubles.

I hope that this material will benefit you. I have everything, thanks for your attention! Good luck on the roads!

Control the road behind ourselves no less important than ahead. According to statistics, more than a third of all accidents happens when trying to turn around, to park or pass back. Not to become the culprit of the auto-operative for these reasons will help the best camera of the rear view, which can be installed both on the frame of the license plate, and somewhere at the level of the trunk. The task of choosing a reliable device that would fully correspond to its price, your needs and served reliably, will facilitate our rating of the most popular models.

Inexpensive products can be found among Russian manufacturers. If you need a European assembly, Korean and Japanese devices are suitable. This is what firms are we talking about:

1. AUTOEXPERT. - Russian firm with a large, replenishing assortment. Technique is different affordable price and good adaptation to Russian cars.
2. XPX - Korean brand recently appeared on russian marketBut quickly gained popularity thanks to inexpensive, high-quality equipment with the official guarantee.
3. Bigson. - a company based in South Korea and video technology producing budget carsand for elite. Products are popular in Canada, Japan, USA due to high quality.
4. Alpine Electronics. - Japanese firm for the production of video devices for Mercedes, Audi, Volkswagen. Works in this niche since 1997, offers budget models European assembly.
5. Sho-me. - Under this brand, automotive electric and lighting, accessories of the elite class are produced.
6. Fighter. - The manufacturer offers products for both passenger and trucks with a fastening in a frame or a bumper with a guarantee for 12 months.
7. ROLSEN. - Russian company leading history since 1994. Produces large and small household appliances from Asian parts according to LG and Toshiba techniques.

Rating of the best chambers of the rear view

When drawing up the rating was taken into account real Reviews Buyers, among which are both men's and women. Attention was paid to the quality of performance of the price, the main characteristics. The choice of the best was made with the following nuances:

• Method and complexity of the installation;
• Dimensions;
• Viewing angle;
• Screen resolution;
• Quality picture;
• Degree of resistance to moisture;
• Ease of use;
• Cost;
• Brand;
• Build quality.

The best rear view cameras

These devices are divided into universal and regular (mortise, frame). They can be attached to the bumper, car license plate or at the trunk level. Their use is especially relevant on the loaded roads and at night due to insufficient illumination of the carriageway. The information recorded with their help can supplement the one that DVRs are given during the auto industry. The rating of these gadgets, we also compiled.

Best parking camera

AUTOEXPERT VC-204 - affordable option With enough opportunities. The installation of a mini rear view camera is carried out under the license plate frame and externally not striking. For convenience, the image transmission can be configured to mirror or connect to the video recorder. The backlit rear view camera allows you to safely park insecure drivers, as it is able to read the marking lines even in the dark. So that the use does not bring trouble, the developers provided a device for protection against moisture, dust, and also thought out a wide range of operating temperatures - from 20 to 70 ° C.

Advantages:

• Adjustable viewing angle of 170 °;
• Low price;
• Good night lighting;
• Universal under any car;
• Simple installation.

Disadvantages:

• Sweats with high humidity.

AUTOEXPERT rear view cameras are a good budget option. To complete the kit, users in reviews advise to buy a panoramic rearview mirror of the same brand.

Available rear-view camera

XPX CCD-309B LED - standard rear view camera for car. This option is reasonable to choose for periodic use. The model has an overhead installation method, for this purpose there is a special drill, a 6-meter cord and instruction. Despite the low price, the device will serve not one season thanks to protection against dust, moisture and dirt. The image at the outlet pleases with good quality achieved by the automatic balance of white and IR illumination, which adequately copes with its tasks at night.

Advantages:

• Low price;
• Simple installation;
• Color image;
• Good protected from external influences;
• There is parking markup.

Disadvantages:

• The viewing angle is 150 °.

ROLSEN RRV-180 - takes off at an angle of 170 ° horizontally. The video thanks to the NTSC system is high-quality and in good color. To get a clear picture, even at night there is an IR illumination and a CMOS matrix. This model is not scary moisture, it is protected from exposure to water and snow. Good view Provides video resolution in 640 × 480 pixels. The image is displayed in mirror mode. The operating temperature range is in the range from 20 ° C to + 70 ° C. Power is carried out using DC 10-15V.

Advantages:

• Works at very high and low temperatures;
• Highlighted in the dark;
• Protected from moisture;
• Covers a large plot.

Disadvantages:

• Small resolution;
• Fuzzy picture;
• Unreliable fastening;
• Chinese production.

UC-36 - produced under the BlackView brand in China and is made of black plastic. The moisture is protected at the IP67 level, removes the matrix permit in 648x488 pixels, has parking lines. The minimum operating temperature is -20 ° C, and the maximum + 70 ° C. The number of TV lines is 480. The backlights are not provided, and the angle of view is 140 °. In the kit there are two cables: one for connecting to the network, the other - for the camera. The device provides an annual warranty.

Advantages:

• Suitable for any car;
• Good viewing angle;
• Inexpensive;
• High-quality image.

Disadvantages:

• Not highlighted;
• Plastic housing;
• Weak video signal.

UC-36 BlackView is usually installed in the roof area of \u200b\u200bthe car.

Alpine HCE-C125 - the housing is made of durable hermetic plastic, withstanding moisture. The picture is displayed both on the main monitor and on the connected additionally through the RESS jack. To see everything that happens behind the machine, allows a wide viewing angle, in a horizontal position it is 131 °, and in vertical - 103 °. If necessary, an internal synchronization and automatic change in the settings of the White Balance of ATW / AWB are carried out. The kit includes a cable with a length of 0.5 m and the main device with a width of 2.36 cm, the same height and thickness of 2.4 cm. The gadget consumes up to 0.9 W and together with the block weighs 110 g. Noise level - up to 47 dB.

Advantages:

• Good maneuverability;
• Automatic color correction of the image;
• Not heavy;
• Wide operating temperature range;
• Famous brand.

Disadvantages:

• Captures vertical at a small angle;
• Reliably removes in the dark;
• Camera short cable.

The best model in the form of a frame

SHO-ME CA-6184LED - gadget with two types of colors, PAL and NTSC, LED backlight and parking markup. The shooting is conducted in color mode CMOS matrix, in 420 TV lines, the housing is protected from moisture, the PC7070 image sensor is present. Maximum power - 0.5 W. The upper boundary of the permissible temperature is + 60 ° C, the lower -20 ° C. The device reaches a height of 1.4 cm, and in length - 5.45 cm.

Advantages:

• There is parking markup;
• Color;
• Warranty per year;
• Durable housing;
• Simple installation.

Disadvantages:

• Small power;
• Big sizes;
• Chinese quality;
• Short wire;
• It is easy to steal.

SHO-ME CA-6184LED removes video both in the center and on the sides.

Best Universal Camera

FC-12 - Products are available under the Fighter brand and can be used both as a rear view camera and front. The signal transmission is carried out by the NTSC chromaticity system. Screen resolution over brightness channel is 420 TV lines. The image that is displayed on it consists of 656 × 492 dot pixels. Remove the high-quality video at an angle of view of 170 degrees at any lighting allows a high-sensitive element of type HCCD. For orientation, a parking markup is present to the other object. The manufacturer provides a warranty for the year.

Advantages:

• Powerful video signal;
• The set is extended and fastening nut;
• A high resolution;
• It is inexpensive;
• Image quality above average;
• Invisible.

Disadvantages:

• Bad works at night;
• Uncomfortable installation type;
• Weak degree of protection against moisture;
• Most often, during mounting, you have to drill the car body.

What rear view camera is better to choose

For an inconspicuous installation, models that are mounted in the license plate frame are needed. If you don't want to spend time, you should pay attention to universal devicesFastened to the bumper or body elements.

Here are several useful Soviets optionally:

• For night shooting, models with illumination and the highest resolution are needed.
• Normal work in rain conditions is possible at high moisture resistance of the device.
• To ensure trouble-free parking check-in gadgets with parking markings.
• Stable functioning in the northern regions will provide models with a temperature range from +20 to -100 C.
• If you do not want to drill a car, then you should not choose a mortise model.
• The viewing angle must be at least 105 degrees vertically, otherwise it will be bad that there is a car behind.

In the release of the transfer "Home Road", the question of the rear view cameras is considered: what they are how they are attached, for what you need. This video will help make right choice:

To choose the best camera of the rear view, it must be taken into account in what conditions and for which it will be applied. It is also worth paying attention to the quality of execution, design, ease of use, cost and brand.