Russian car owners are well known for the model of the Japanese Salon crossover Nissan. Qashqai. Many drivers sitting behind the wheel are worried out of extraneous smells, penetrating periodically inside the passenger compartment.

All this happens because salon filterMounted on board a car, from time to time polluted. In addition:

- Alien smells fall inside the car;

- Violates high-quality operation of the system, which carries out the circulation of air masses inside the car's cabin.

Polluted cabin filter forces the air conditioning system as well heating system Work in reinforced mode. The latter wear out much faster. The fuel is consumed in large volumes, the components will be broken soon. If you do not replace the Nissan Cashkai, who came into disrepair in time, will soon have to change the entire system.

In the broken salon filters, harmful chemical elements and bacteria are accumulated, the mold is developing, from which it is very difficult to get rid. The presence of mold and harmful impurities in the cabin is the cause of allergic diseases.

The replacement time of the salon filter is determined by the degree of contamination of the filter itself. Often the situation when the filter is clogged long before the onset of the regulatory period. Using detailed instructionsWe can make installation yourself.

To replace the cabin filter, we will need keys with heads of different calibers, as well as a set of screwdrivers.

Instruction: How to change the cabin filter on Nissan Qashqai. do it yourself + photo and video

The process is carried out in such a sequence.

1. Yesay the decorative plastic panel (it is simply declined).

Replacing the salon filter Nissan Casca

2. To do this, we guide blowing on windshieldAnd we put the temperature to the maximum (the flap is in the extreme upper position). As a result of this operation, the damper will be located in such a way that it becomes easy to get to it.

3. With a flat screwdriver, we remove the filter chamber plug.

4. Since the filter removal will interfere with the flap control unit, then first dismantle this block with a screwdriver. To do this, remove the chip from the control unit connector, then unscrew the two bolts of holding a block.

5. Ensure old filter and replace it with a new one. Pay attention to the direction of the arrow, it must coincide with how the previous filter was installed.

6. Close the lid, set the adjustment block back.

7. Drink to the place of the decorative panel, which is driving.

At the end of the operation, the passengers will begin to breathe freely, and the car stove will work much better.

Also watch video

It is part of the procedures for regulatory maintenance. Change the cabin filter with your own hands is quite simple.

When to change and which cabin filter to put

To replace you need the original 27277EN000, but you can also use the analogues that are currently offering various manufacturers.

In this case, using this opportunity, to Nissan Cascai was decided to install TSN 97372 (coal filter). Among the analogs there is also a MANN FILTER CU1936, Sakura CAC1810, MAHLE LA396 and many others.

Where is and how to change the cabin filter Casca

The cabin filter is located in the area of \u200b\u200bthe gas pedal, to the right of it, behind the panel. To replace, you need to remove the tuning of the central tunnel, prepare the temperature valve control unit, remove the cabin filter cover and dismantle the block. After that, you can replace the filter and collect everything back. Read more in descriptions to the photo.

Photo source: qashqai-club.ru/forum/topic/4658/

Original saloon filter Nissan. Qashqai 27277-EN000

Analog coal cabin filter Nissan Casca

Remove the plastic lining of the central tunnel from the gas pedal side to access the cabin filter. I pull on yourself.

Since the pad on the part of the pedals is inserted into the guide, and from the driver's chair, it keeps on 4 latches, then after release the latch, the pad is shifted to the right.

Before removing the filter plug, it is necessary to carry out some preparatory procedure, namely: prepare a temperature damper control unit to easily collect it back.

To do this, we send blowing on the windshield, and set the temperature to the "HI" mode (the flap is in the extreme upper position). Or set the temperature in "Lo", then the unit is lowered it to the extremely lower position.

After that, the bottom of the plug should be bent a simple slotted screwdriver (red arrow).

Due to the fact that the plug has a simple latch, it is easy to remove and put it.

Now we see the place of installation of the cabin filter.

Since the dismantling of the filter will interfere with the flap control unit, then first dismantle this block with a screwdriver. To do this, remove the chip from the control unit connector, then unscrew the 2 bolts of the block holder. The block itself is removed quite easily.

Remove the exhaust cabin filter (you need to pick it up with a screwdriver).

Air direction arrows (We pay attention to them) on the worked old salon filter.

In the bodies of Nisan Cascais of the first generation J10 released 2007, 2008, 2009, 2010, 2011, 2012 and 2013, use a filter for cleaning the air entering the cabin.


Under operating conditions, the filter is regulated - checking the filter every 3 months or 6,000 km of run.
The replacement is made every 6 months or 12,000 km.

Filters

There are options to buy a filter cheaper, but it will be an unoriginal filter, that's all the prices for filters different manufacturers, (suitable any of those presented).

Choose - TSN for 115 rubles.

You can buy it in any store of auto-consumables and spare parts on Nissan.

Replacement

1. Decorate the plastic panel with shifting to the side and it will take off.

2. Next, we unscrew and remove the flap control unit. Remove the two fastening bolts.

Remove the block.

3. Remove the lid of the cabin filter.

4. Slightly bent, pull out the exhaust filter.

5. Next, bend the new filter by the accordion and insert into place.

6. Close the cabin filter cover. We collect everything in the reverse order and blow the system.

Video

The replacement of the salon filter Nissan Kashkai must be carried out periodically, as well as on any other car, if the filter element is not changed on time, passengers will breathe with dusty air, and the heater radiator or air conditioner will be born.

Modern car Operated in a polluted ambientAnd soot and dust, spent gases from the road penetrate into the car salon.

To harmful substances less fell in inner space Automatic, installed cabin filter, it can also be referred to as a filter of a stove or climate installation. The replacement of the salon filter Nissan Kashkai must be carried out periodically, as well as on any other car, if the filter element is not changed on time, passengers will breathe with dusty air, and the heater radiator or air conditioner will be born.

Replacing the cabin filter Nissan Cascai (J10)

The Compact crossover Nissan Cascais is produced from December 2006, presented in 2-generations:

• in the Body J10 (2006-2013 century);
• in the body J11 (2014-produced now).

Nissan Qashqai cars in any configuration are equipped with air conditioning (climate control), so the cabin filter is extremely necessary here - the filter element protects climatic installation, not allowing to penetrate the dust in the system.

According to the factory regulations, replacing the air conditioner filter and the stove should be made on each second. maintenance, that is, approximately every 20-30 thousand km of mileage. If you do not change the cabin filter (SF) on time, dusty air begins to penetrate the salon, contaminated: the radiator of the heating system, the air conditioner evaporator. As a result, it ceases to warm the stove normally, the climate system works well. It should be noted that when operating a car in dusty conditions, the air conditioner filter (stove) changes more often.

On the first generation crossover, Casca will be replaced independently, this work is easy to perform, but it requires care and accuracy. Change the PF as follows:

Everything, the replacement of the salon filter Nissan Cascai on this is finished. Some car owners qashqai j10 When replacing the SF, it is recommended to remove the pedal node for the filter to be laughed. This is not necessary - the original filter element has sufficient flexibility. Of course, an unoriginal SF can and see, but the installation of such parts should be avoided at all, their quality is difficult to guarantee.

On new models, Nissan Cascais release 2014 and 2015 is located elsewhere - it is in the passenger's legs on the left side, below, next to the central console. Replace the filter on Qashqai J11 is even easier than on Nissan in the Body J10, consider how it can be done.

Replace the cabin filter as follows:

Replace operations here at least, so you can perform such work almost any driver with your own hands. True, in this case there are nuances - by taking out the filter element, you can not be afraid to smith it, as it is no longer useful, but it is not always easy to install the SF. Filter element in its planting place It enters tightly, usually it easily passes two thirds, and then it has already to stuff it. Best posted in their place original filtersBut they cost more.

For crossover Casca industry produced filters of original and non-original production, car owners are offered products from different manufacturers:

• PKF "Nevsky Filter";
• Bronco;
• JS Asakashi;
• Corteco;
• Concord;
• Mann;
• Godwill;

Depending on the manufacturer, materials may be different in price, the cost of parts is from 250 to 800 rubles. In addition to simple salon filters, there are also coal, which are more effectively filtered by air, but they are more expensive. The advantage of the coal FF is that it does not allow you to penetrate the strangers going from the road (streets) to the car salon. But this filter element is also a flaw - air is poorly passed through it. GODWILL and CORTECO coal filters are high enough, are a worthy replacement of the original.

On the cars Nissan. QASHQAI J11 The SF with a longitudinal "accordion" is installed without any problems, they are easily included in the place and are practically not frozen when installed. For Casca J11 there are non-original "consumables", which in thickness compared with the original almost twice as thinner, but whether normal air filtration with such elements is unknown.

Nisan Qashqai can be loved or not to love, but in one everything is converging: it is impossible to take it to cars that are easy to maintain, it is impossible: the extremely dense layout is affected, where access even to the simplest consumables is difficult.

Replacing my own salon filter on Nissan Cascai, you can spend a lot of time and curses addressed to his inventors, but it is in the process of work "on yourself" to understand that someone is hardly in the car service will spend on it all the time for acceptable money: most often The new filter is pushing into the compartment as it turns out. So it is not only cheaper to change it, but most likely, more reliable.

How often do you need to replace?

Replacing the salon filter Nissan Cascais is prescribed on each even then, that is, 30 thousand kilometers or 2 years. But in large cities, with a frequent ride on the settlement, it is not possible to withstand such a period of a compact filter - usually the flow of air from ventilation significantly weakens already for 15-20 thousand.

Due to small compartment size most often on scored filter Fall in the fall - in fact, it is quickly clogged with leaves, which are also rotated. Therefore, it is not necessary to change the filter earlier, it is better to coach it to the end of the leaf fall. At the same time, it makes sense to work out and prophylactic treatment of the air conditioner evaporator, then not to perform twice of very uncomfortable operations.

Choosing a salon filter on Nissan Casca

Initially, the plant gave the filter catalog number 27277-EN000. In the future several times, Nissan and Renault, the value of consumables was revised, so that when checking on VIN, catalogs may also issue number 999m1-VS007 or 27277-EN025.

In any case, this is the same filter - moreover, in the supply for dealer technical centers, it takes even two completely excellent articles.

The price of this filter is small, so you will not bring a big savings to the replacement of the cabin filter to the neoriginal. Usually, non-original filters are purchased for the sake of the coal filler to get rid of the chad in traffic jams, or if the original in the local trading network has a too big mark.

It is worth paying attention to: "Nevsky filter" NF-6351 (from analogs this cheapest, but his quality is quite worthy), TSN 9.7.371 (filter without coal filler), TSN 9.7.372 (coal), Mann CU1936, Delphi TSP 0325 227 C, Filtron K1255, Knecht La 396.

Instructions for replacing the salon filter

Having decided to change the filter with their own hands, it is necessary to pre-develop them - a fair flexibility will need from fingers, and not in a convenient place itself. First you need to store a bright compact flashlight on a magnetic fastening - it can be conveniently fixed over the pedal block, so as not to grope fasteners in the dark. Outowing driving seat Back, you can climb a "torpedo".

A common error is to start the disassembly at once without setting the climatic installation to the maximum stream of hot air into the glass. The fact is that when removing the motor of the air damper is released the gear of its drive, and the flap falls to the lower position. To install the motor, then you have to turn the gear, holding it with your finger to catch the right position, which will make it difficult to work even more.

For access to the right place, a plastic pad of the central console near the driver's right foot is removed. It is possible to do this only in warm - the latch of the free plastic, most likely burst. It overlooks the motor deuctor - it is located opposite the gas pedal, almost in the back of the stove box.

Immediately behind the motor is the cabin filter cover. Having turned out the touch at the bottom, it can be removed, and the filter itself pull out to the outside - it is no longer sorry to damage it.

To install the new filter, you will have to remove the motor deuctor so as not to break the curtain about it. By revealing two bolts, we assign the motor to the side, then twist the new filter to spend it past the gas pedal. If it could be easily removed, there would be less problems, but it is attached on a general bracket bracket.

When starting the start of the curtain in the compartment, it squeezes and twist it even more until the outer edge goes through the gas pedal position sensor. After that, you can remove the filter effort and finally push it into the compartment.

It remains to be returned to the place the cover of the filter and the motor deuctor, after which check the work of the flap, turning on the ignition and changing the stove settings. If a characteristic crack is distributed in some position - it means that it is necessary to shift the gears to the tooth-two in the opposite direction: when assembling there was a shift, and the damper comes to the extreme position before the motor deuctor comes to it. Already making sure that everything works fine, you can put the plot of the central console.

Video Replacement Salon Filter on Nissan Casca