Toning of car windows with their own hands (VAZ-2106, 2107, 2109, 2110). Toning the rear window of the car do it yourself

Many car owners believe that the tinting of the glasses with their own hands is the necessary and obligatory procedure, while each person has its own reasons why he thinks so. Some prefer to just take care of their own health, while others want to make their vehicle more attractive.

Why do it?

There are several of the most common reasons why drivers are tedting the glasses with their own hands:

1. It provides a decrease in the heating of the cabin approximately 60% even at the hottest time.
2. Due to the presence of tinted glasses in the car, there are practically no ultraviolet rays that have a harmful effect. Thus, you can provide yourself with protection from skin cancer.
3. If a lateral collision of two cars occurs, the glass toning, with their own hands done, will allow you to keep the glass that can crash into small fragments. Thus, the driver will always remain protected from any cuts.
4. Due to the tinting, you can get rid of sun rays, snow reflections, as well as the lights of the front headlights of the counter transport, which can blind in the process of movement.
5. Using tinting, the driver provides effective protection for not only the lining of the cabin, but also of various plastic parts, which can be completely spoiled by direct sunlight.

All these effects provide glass tinting with their own hands.

How to do it?

The above effects are achieved using a specialized film glued to the glass. In order to make this specialized material, it is customary to use a specialized polyester film on which paint and metal composition are applied, which has special properties.

Is it difficult to ride at night?

Many people believe that if the car windows are tinting with their own hands or with the help of specialists, due to the dark color of the film, the night ride will be difficult. First of all, you should understand that there is always the possibility of applying a film with a minor degree of dimming, while in any case it will pass through yourself visible light, despite the fact that all the choppers will be reflected.

What should be considered?

Film must be mandatory to be attached directly from the inside, because so you can provide its maximum protection against various damage.

If you need a toning of the rear window of the car with your own hands or you want to tint all the permissible glasses at all, then in this case it should be initially understood where this film can be installed and where - no. In Russia, in accordance with the current legislation, the turning of the front automotive glasses can be carried out exclusively using such a film in which the light transmittance is at least 75%.

Preparation of glass

Before tinting the rear window of the car with your own hands, you should carefully clean its surface, because the glass should be as smooth as possible with the complete absence of chips or depositions. If any radioantines are pasted on the glass or cellular, then in this case you will have to or bypass them, or completely dismantle.

Rear window - the most difficult

It is worth noting the fact that the tinting of the rear window of the car with their own hands without a hair dryer is the most difficult stage, because this process can be very difficult to blow or all sorts of stop signals. In the event that you understand that you will not be able to cope with this work, it is better or completely abandoned by the idea of \u200b\u200btinting, or just turn to professionals.

We make film

To properly apply a tinted film in most cases, specialists carefully pull out automotive glass, after which it is already carried out all the work on a specialized desktop, covered with glass or smooth linoleum. In the event that you do not want to do this or you do not have such an opportunity, you can use papyrus paper applied to the automotive glass for further outlines of all contours. After these procedures, you will need to cut molds with extremely clear boundaries, and then transfer it to the toning film. Thus, you can cut the film in full compliance with the shape of the automotive glass.

Instruments

Not everyone understands that toning is not such a simple procedure, and not enough to just take and paste the film. You definitely need a certain row of instruments in order to be correctly toning the car windows with your own hands. VAZ 2107, 2106 - These and other domestic cars are no exception, and you should not think that our cars are easier to put the film than others.

In this regard, you will need the following tools:

• Film. In the predominant majority of cases, it is enough of the only roll of tinting film of standard sizes in order to cover all sideways.
• Rubber spatula. Often, when you buy a toning film, a specialized plastic scraper is provided to you as a bonus. Of course, it can be used and when it is toning the car windows with your own hands. This tool is quite efficient and convenient, but there is a risk that microcracks will remain on the glass.
• Knife stationery. Also included with the film and the knife is also supplied, but in fact it is often stupid quite quickly, as a result of which the film begins to literally break off. That is why it is always better to have an additional stationery knife.
• Means for washing glass, as well as warm clean water from under the tap.
• Fully dry rag. It is worth noting the fact that there must be no vault on the rag. Only so you can be absolutely confident in the fact that in the process of tinting you will not apply any microcenarpins on the glass.
• Spray.

It is recommended to take a partner with you, which will help you carry out all the procedures, because it is practically unable to toning the car of the car with your own hands. VAZ 2110 over the past few years have often begun to be toned, since the car was gaining great popularity, but many trying to do it alone, allow a huge number of different errors. It is also worth noting that all work should be carried out in a unwanted room, and if you spend the procedure on the street, then you need to do it only in weak weather.

With or without hairdryer?

You decide whether to carry out work with or without a hairdryer. If necessary, the installation, construction or even household hairdryer can be used in order to thoroughly dry each toned window for a short period of time. Thus, you reduce the total duration of all tinting.

Instruction

Initially, you will need to remove the seals before tinting. All automotive glass to which toning will be applied must be thoroughly washed with a specialized detergent. It should also be extremely thoroughly rinse all angles. Next, the tinting of the car windows with your own hands (VAZ 2109, 2110, 2107, etc.) is carried out as follows:

• A soap solution is prepared, which is a standard detergent or shampoo mixed with warm water, after which it is poured into the prepared sprayer.
• Soap solution thoroughly sprinkles the outer side of that glass, which was washed, after which the tint film is immediately applied, which is cut down according to the desired dimensions. It should be noted that the dark layer should be sent inward, while transparent - outward. It should be extremely careful here, because the parties cannot be confused. If you can not decide which side is dark, then you should be very slightly divided from one corner. After the film is applied to the glass, thorough alignment and circumcision is carried out. It is best to leave the reserve from each edge to one centimeter.
• Now the inner surface of the glass is covered with soap solution. After that, you should act extremely quickly, because the glass should not have time to dry. Gently separate the dark layer of the film, and at the same time we wat it with a solution that is filled with a pulverizer. In this case, the work of the assistant is very important, because you can perform all the procedures much more accurately. In this case, one person will have to hold the transparent layer of the film, while the other is to stretch it and spray a dark layer.
• The dark layer is applied to the inner car glass. As mentioned above, while toning the windows of the car with their own hands is carried out (VAZ 2106, 2107, 2110 and all others), glass should remain wet. Mandatory, treatment is also carried out using a pulverizer, after which the transparent layer is superimposed, since the film must have effective protection against any damage. After all these procedures, you should instantly smooth the film using a rubber spatula, moving from the center to the edges. In this case, one should be especially careful because any sharp movements are extremely undesirable. You should also completely get rid of any air bubbles.

Close-up film should be smoothed until the transparent part itself disappears, after which you can completely remove the dry transparent film. Now you can already cut the protruding edges by keeping the knife along the edge of the automotive glass, but in this case it is extremely important to act without any rush.

If you have a hairdryer in the presence, then in this case you can thoroughly dry the automotive glass along its perimeter, but if there is no hair dryer, just close the door and begin to engage in the next glass. It is desirable that over the next two days you did not insert any seals in the door and did not open the toned glasses.

Second option

Glasses can also be toned and in another way. In this case, a 20% solution of rosin in a specialized ridiculous sodra is prepared. The rosin should be dissolved until the fluid becomes dark yellow. After this procedure, the preparatory is thoroughly filtered. You should add a slight amount of chlorine iron solution or special iron sulfate. It is worth noting that the red precipitate of iron tires should fall out, which should be separated, then rinse and dry well. This precipitate can be completely dissolved in gasoline.

The prepared solution is applied to the glass with the same spray gun. It is extremely important that the tinting of the rear window of the car with their own hands, as in the case of the rest of the glass, was carried out exclusively on the pure surface. In particular, you can degrease it in a soda solution.

Important

Be sure to waste the glass thoroughly and wait for that until it dry out. After that, place it for 5-10 minutes in the oven at a temperature of 60 ° C. If you wish, you can make a film and other color, but in this case you will need to use another chloride. By adjusting the concentration of rosin and salt, you can independently change the saturation of the color.

The main thing in this process is not to be takenlated by tinting, because it is necessary to do everything in accordance with the current Goste. The allowable tinting of the glass provides that the windshield must skip at least 75% of the light, while the remaining glass is at least 70%.