» »

How to "Givery" the battery from another machine

18.04.2021

When the car sits down the battery, it can be combined with special wires with a battery of another car to make the car engine. Such a technical manneur on the driver's jargon is called "cigarette". In order for this process to be successful and correct, it is necessary to act neatly and understand the structure of the car, otherwise the case will end very expensive repairs.

"Cursting" can help you if the battery turned out to be unexpectedly discharged.

The discharge of the battery occurs, including when it is for a long time to be turned on or radio, that is, the sources of current consumers.

When is the meaning of "dente"?

From time to time, the auto owners have situations where the alarm fails in the car, and the indicators on the dashboard are flashing if the ignition key rotates (and the starter is clicked). If the starter works rigorously and bad, then the whole reason in the served battery. When the starter rake is clearly heard, which indicates its serviceability, but the motor is still silent, you should find another cause of the engine engine malfunction. It can be:

  1. Problems with sensors.
  2. It is necessary to replace the candles.
  3. The frozen water in the gas tank of the car blocked the hole in the fuel line.

What should be the right "cigarette"

In general, this procedure is quite simple, therefore even women drivers can correctly cope with it. To successfully charge the battery from the battery of another machine, follow the sequence of actions:


Is it possible to rent from a working motor

Car drivers, practicing from time to time cursing, often worries the situation of cavitation from the car with a working engine. There is a concern that after recipienting the recipient, the donor can end the entire charge of the battery, because of which he himself will not be able to start.

On the other hand, the withdrawal of the electronic automotive system of the donor is due to the decoration. As a result, you will have to go to the car service for expensive repairs.


There is always a certain risk.

A survey of official dealer automotive services shows that chinning from the machine with a working engine is strictly prohibited. Car service specialists agree:

  1. The donor car, from which they want to seize, the engine should be disabled, and from the battery both terminals or at least minus. As a result of the power grid of both machines will be fully separated. That is, the donor is simply so, without a battery, and the chipping is powered by a remote battery.
  2. If both cars be standing during cursing with engines, the generator and the electronic donor system will be overloaded from the recipient starter (which is causing). As you know, at the start of the motor to start a starter, there is a significant overload of more than 200 amps, so the voltage jump from the recipient generator can melt the controller fuse, as well as completely output the donor power controller. Scripts will be two:
  • the donor electronics instantly braid;
  • malfunctions arise that manifest themselves unexpectedly, for example, loss in dynamics, a car failure from a normal stroke.

Wires for chicting

It is possible that the wires for chilling the battery you will not need any times, but you can easily ease life in case of a sudden battery discharge. Wires for a car should be serious because, as always, quality has an advantage over price. The options are many, but we immediately warned from the purchase of the cheapest sets with rigid flaps and too thin wires, especially Chinese. Such wires are prone to smoke and overheating, when you try to deny them with their help, and do not ensure the chickening even from a fully charged and powerful rechargeable battery. Hardcase on the cold immediately or very soon cracks and break. Prices for high-quality wires start from 800 p. For a three-meter set. Five meter will cost 1200 p. and higher. At the same time, look at the quality of the "crocodiles" - which are designed to connect to the battery terminals. Ideally, the clamps will be copper, and the wire in them is thoroughly propaigted or enclosed. Teeth should be tenacious and strong, and springs are durable and reliable. The "crocodile" of the worst quality may jump from the terminal during the cursing, and cause a fire or capital failure of the car power supply controller.