How to remove deep scratches by car

On the body almost any car ever appear scratches. This situation is commonplace, and it is often impossible to prevent it. Small scratches are able to appear even from innocuous situations. If the emergence of deep defects is assumed, it is necessary to determine the optimal direction of actions and still make efforts to successfully restore the appearance of the vehicle. Initially, it is supposed to use the services of a special service. If desired, you can spend yourself, but the approach should be as cautious and thoughtful to achieve the desired success.

Deep scratches usually appear not just like that. Such defects lead serious situations, so it is desirable to attract profile services to ensure the maximum level of protection.

Only mechanical factors can lead to any defects on the body from the metal. In this case, the state of the car depends not only on its owner, but also from the surrounding persons, the features of the circumstances. It is necessary to prepare for the fact that the greatest risks are noted if drivers neglected accuracy.

Even if you managed to detect, you should not panic immediately. The optimal course of action is the definition of a suitable solution to the problem, improve the appearance of the vehicle.

Classic schemes are guaranteed that the repair will allow to successfully close the scratch on the automotive surface. If it is proved that a third party is involved in the defect of the vehicle, you can use insurance and carry out professional repair without personal financial investments.

The insurance policy of CASCO makes it easier to receive compensation, so it is not necessary to immediately think about how to carry out the necessary repair activities and remove the defects that appear on.

Most often before repairs will be held for someone else's account, it is required to conduct a special expertise on damage assessment and evidence that not a motorist is involved in the event that has occurred.

However, in some cases, after all, it is necessary to think about how to qualitatively remove the deep scratch with their own hands.

Features of the painting of the automobile body

A deep defect involves the mandatory scratch by painting. It should be noted that this method is recommended for significant scratches, noticeable chips.

The best option is to use special paint, which externally resembles the usual manicure varnish. However, in fact, the tool is created to process the body of metal, creating a uniform color surface. The most important thing is to choose the right shade correctly, because otherwise the painted part of the car will be knocked out of the general scheme.

The paint is sold in small bottles with a special tassel, thanks to which it can be easily eliminated by any scratches on the automotive body. The tassel most often allows to facilitate the scheduled event and guarantee the optimal result achieved in the minimum time.

It is important to note: the surface can be painted only after it is degreased by a special solution and two napkins that differ in the absence of a pile. One napkin is used to completely purify the surface of the car from excess fat, and the second napkin is for wiping dry.

It is necessary to exercise enhanced caution when buying special tools that allow you to extract the emerging defects by car. The fact is that the paint is sold in one bottle, and varnish in another. In each case, the procedure is necessary on the same scheme: the surface of the car is carefully degreased, after which the paint layer is applied, and then varnish.

Stages of the procedure

Repair of deep scratches is made in a certain sequence in order to achieve the desired result. What tasks need to be performed with your own hands, guaranteeing the restoration of the car?

1. Stripping is the first and important stage. It is required to carefully remove rust and dirt from a damaged surface. For stripping, it is recommended to use high-quality sandpaper. If the scratch was deep, you should make sure the perfect condition of the machine. Otherwise, the risk of corrosion development appears, despite the fact that it will be possible to close the surface. At the same time, it is undesirable to overdo it, since with another scenario, it takes more to paint the car body. A rational approach is required to restore the car.
2. The next stage is a putty. It is assumed to put the damaged plot. Only suitable products can be used to restore the metal. It is best to carry out such repair of a car using a polyester two-component putty with a hardener. The cooked remedy should be neatly applied, and then to dissolve the spatula created from high-quality rubber or thin metal. If the shtalavka is performed qualitatively, in the subsequent work on the restoration of the car is simplified.
3. Mandatory step - sanding. This stage also assumes the ability to remove unevenness from the surface of the machine. It is recommended to use coarse sandpaper, and then fine-grained. The main task is to obtain the perfect body. If the work is carried out with maximum caution, pit, bugs, body scratches will no longer disturb.
4. Primer. The next stage is the applying of soil. The perfect option is to use a sprayer, as it allows you to easily carry out the necessary activities on the car body. After the soil dries, it is necessary to remove undesirable defects on the damaged section of the car, and for this, they traditionally use water and waterproof, very fine skin. It is desirable subsequently for such a scheme to remove the smallest irregularities that could be preserved on the car body.
5. Scratch scratch is a mandatory stage. The elimination of defects on the body from metal is always carried out with preliminary degreasing. Paint can be applied with a tampon or brush. The ideal option is to use the collapse, and the possibility of using a car chamber from freight transport appears. Repair is always divided into two stages, each of which can be successfully performed by their own hands. It is advisable to apply the paint in two layers, and it is assumed a break in five to seven minutes. If it was not possible to successfully close the defect due to lack of experience, you can remove flaws. After the paint, it is allowed to releate the surface of the metal with fine-grained emery paper and water, but you need to remember the maximum caution.

If necessary, the number of layers of paint is allowed to increase, because the result depends on it. The number of layers is always determined by the color of the soil, the consistency of the paint. In any case, the drying of the layer is given no more than seven minutes. When the car repair will be performed at this stage, you need to wait 20 minutes to completely dry the paint.

After the surface dry surface dries on the machine, you can apply a layer of varnish. It is best to do this work to the best classic spray gun, which will allow successfully removing unwanted scratches or shortcomings.

Each new layer must perform a little over the previous one.

After you manage to apply a layer of varnish on a car, you need to wait a couple of days for complete drying. The final stages are then coming: grinding, polishing, they need to be done by classical principles.

Conclusion

The appearance of the car can be restored independently, after all, thoughtful repairs with high-quality specialized products will allow remove scratches, and then remove the shortcomings and to remain satisfied with the result of the body's restoration.