Replacing windows front door VAZ 2101, 2106 do it yourself

Hello! Today we will talk about such a simple, but at the same time not without secret, about the replacement of the windows on the VAZ 2101 and 2106. That is, the story will go about how all the way to tame this naughty cable, in the post it means short glasses (2101), on Long glasses (2107-05) slightly different cable motion scheme.

It is necessary to start a replacement with the theory, so that we offer to your attention a scheme at which a regular window lifter works.

As we can see the cable moves along three rollers, when replacing the window lifter, it makes sense to lubricate them and check whether they rotate freely.

I will not go into details about how to disassemble the door, it is not difficult and everything is clear there. It is necessary to start a replacement from dismantling a unusable windows, it is fastened with three buckets on "8", also with a cross-shaped screwdriver it is necessary to unscrew the fastening of the glass plank to the cable and take the cable to the side.

After dismantling the old windows and check the free rotation of the rollers, you can start installing a new one. Remove from the box a new glass lancher - it will look similarly shown in the first photo.

Attention! You can not shoot on an unidentified window lift with a bracket that fixes the cables in the wound state if the cable jumps out, the lift is confused and return it to the previous position oh how difficult.

Next, you can scout a new windows on the door, and put the cable on the rollers according to the scheme (photo2). Near the lift body, the cable must be crossed out, that is, the cable that goes from the bottom of the drum goes to the top roller, from the top of the drum to the bottom roller.

After that, you can pull the cable on the rollers, in order to make it necessary to weaken the lower adjustable roller and stretch the cable according to the scheme. If suddenly, the cable will not be enough, in order to put it on the rollers, it is necessary to wear a cable for two rollers and remove the nick, which fixes the cables and not weakening the tension of the cables to wear it on the rollers.