Connection diagram of fog over the relay

Connecting foglights if they are not provided by the manufacturer, an optional procedure is not at all, but certainly useful. Do not talk about how the lighting of the roadway can affect the safety of the movement, the eye fatigue and the comfort of driving the car in difficult weather conditions. The fog is a very useful thing, but they need to connect them correctly, the more modern models.

For what and how to connect fog lights

Each light source has its own emission spectrum, and if we are talking about fog lights in the original understanding of this term, they must have a difficult spectral balance. The fact is that the standard, the stock light, installed on the tanning plant has a sufficient stock of brightness, intensity, and if the head light is configured correctly, then it should be enough for everyday use. Another thing, old cars, which at the time of the exit from the conveyor did not have such lighting devices, like modern cars.

One way or another, but additional lighting never puts. The meaning of the installation is often not quite true. - This is the headlight with a special color spectrum of light, which is quite different behaves in a thick fog. Most often, yellow light filters put on fog lights, because only they could give a bunch of light special characteristics. How does the light filter affect? The most immediate.

Why exactly fog?

The fact is that the fog is a water suspension, the smallest particles of moisture, which in suspension are above the soil. The optical structure of the drop is such that the usual light from ordinary it simply reflects like a mirror. Whatever power there is white lamps, whatever the nature of their light, they never run a small particle of water, which billions were unquidated before your hood. They will simply create a white wall, and the brighter will be the light, the stronger this wall will be. The yellow spectrum is the opposite, it does not reflect from the water suspension, but stitches it through, and although visibility does not become perfect, but significantly different from the conditions of movement that the headlights create the headlights.

Electric fog connection circuit

Thus, we will no longer be confused in terms. If we are talking about connecting a powerful lamp, it is connected by such a scheme.

Connection diagram of fog lights through the relay explains almost all the difficulties that may occur during installation. However, we present a few comments to the scheme so that its work is more understandable, and the installation is more meaningful.

How to connect fog lights through the relay

To connect headlamps, we will need some tools:

First of all, it is worth determining the physical location of the relay. It is small, so it can not even be attached, but hide behind the dashboard. But the place to find it necessary, since it is necessary to somehow measing the wires. Remove the dashboard and the central console, we find a place for the relay.

We will feed the relay from the overall lights, along with which the backlight of the instruments and the central panel is turned on. We find any backlit wire with a connector, secure the first wire from the relay. The second wire must go to the power button. Where to place it - you decide.

Next, stretch the wire from the contact 87 to the battery, pre-placing the fuse in a convenient location. Contact 86 relays connect with a mass in any convenient location. Actually, the scheme is connected, it remains only to put the fog, and this operation does not require the scheme.

When installing the fog, you need to carefully read the standards for installing additional lighting equipment that are written in traffic rules. Otherwise, there are no problems later. Also, the fog stands should be carefully adjusted, but this is a completely different story. Let your fog light shine brightly in any fog, and safe you!