Antifreeze is a non-freezing technological fluid designed to cool the engine of Hinda IX35 at an outer temperature from + 40C to - 30..60C. The boiling point of the antifreeze is about + 110c. The antifreeze functions also include lubrication of the internal surfaces of the Hyundai IX35 system, including water pump, preventing corrosion formation. The service life of the unit depends on the liquid state.

Tosol is a brand of domestic antifreeze, designed in 1971, which began to be produced in Tolyatti during the USSR. There were only 2 types of domestic antifreeze: Tosol-40 (blue color) and Tosol-65 (red).

Antifreezes are distinguished by additives included in it:

• Traditional antifreeze;
• Hybrid antifreeze G-11 (Hybrid, "Hybrid Coolants", Hoat (Hybrid Organic Acid Technology));
• Carboxylate antifreeze G-12, G-12 + ("Carboxylate COOLANTS", OAT (Organic Acid Technology));
• Ledok antifreeze G-12 ++, G-13 ("Lobrid Coolants" or "Soat Coolnts").

If the cooling fluid is required in Hyundai IX35, then safely mix antifreeze only in one type, and not colors. Color is just a dye. Water (even distilled) into the Hyundai IX35 radiator is forbidden, as in the heat at a temperature of 100 ° C boils, scale is formed. In the frost, water will freeze, the nozzles and the radiator Hinda IX35 will simply break.

Replace the coolant on Hyundai IX35 for several reasons:

• The term of antifreeze ends - the concentration of inhibitors in it decreases, the heat transfer decreases;
• Reduced the level of antifreeze from leaks - Hindai's expansion tank should remain constant. In this case, it can flow through looseness in compounds, or cracks in the radiator, nozzles.
• The level of antifreeze has decreased due to engine overheating - Antifreeze begins to drop, in the plug of the expansion tank of the cooling system Hinda X35 opens a safety valve, dropping a pair of antifreeze into the atmosphere.
• Replacing the details of the cooling system Hinda IX35 or engine repair;

Frequently operating radiator electric fan in the heat - reason for checking the quality of antifreeze. If you do not make a timely replacement of antifreeze on Hyundai IX35, then it will lose its properties. As a result, oxides are formed, a risk of engine overheating in hot weather and its defrosting at negative temperatures appears. The first replacement period for antifreeze G-12 + is 250 thousand km of run, or 5 years.

Signs for which the state of spent antifreeze in Hyundai IX35 is determined:

• Results test strips;
• Measurement of antifreeze in Hyundai IX35 refractometer or areometer;
• Changing the color shade: for example, there was green, rusty or yellow, as well as turbidity, fading;
• The presence of chips, chips, scale, foam.

Replacing antifreeze on Hyundai X35 Procedure Not difficult:

Waskening the Hyundai IX35 cooling system, before filling a new antifreeze, completely removes the protective layer and the remains of the old antifreeze, this is necessary when switching from one type to another. For flushing radiator Hinda X35, use special needs, which is often diluted with water in accordance with the instructions.

The finished flushing is poured into the expansion tank of the Hundai IX35 radiator with a muffled engine. It is definitely necessary to warm up to the operating temperature, to operate the thermostat and antifreeze began to circulate by the large circle of the cooling system.

Then the engine is crushed, it is allowed to work at idle for 30 minutes. Dry washing liquid. The operation is repeated depending on the composition of the flowing fluid. The washing mixture can be used only in the first approach, in the subsequent - distilled water. The replacement time of antifreeze on Hyundai IX35 is from half an hour, with washing - up to 1.5 hours.

Antifreeze for Hyundai IX35

The table shows the type and color of the required antifreeze for fill in Hyundai IX35,
released from 2010 to 2014.

Year	Engine	A type	Color	Lifetime	Recommended manufacturers
2010	petrol, diesel	G12 +.	red	5 years	Havoline, AWM, G-Energy, Freecor
2011	petrol, diesel	G12 +.	red	5 years	Frostschutzmittel A, Vag, FEBI, ZEREX G
2012	petrol, diesel	G12 ++.	red	from 5 to 7 years	Freecor QR, Freecor DSC, Glysantin G 40, FEBI
2013	petrol, diesel	G12 ++.	red	from 5 to 7 years	FEBI, VAG, Castrol Radicool Si Oat
2014	petrol, diesel	G12 ++.	red	from 5 to 7 years	Frostschutzmittel A, FEBI, VAG

When buying, you need to know the shade - Color and A type Antifreeze allowed for the year of release of your IX35. Manufacturer choose at your discretion. Do not forget - each type of fluid has its own service life.
For example: For Hyundai IX35 (1 generation) 2010 G.V., with a gasoline or diesel engine type, the carboxylate class of antifreeze is suitable, the type G12 + with shades of red. The approximate term of the next replacement of which will be 5 years old. Opportunity, deposit the selected fluid for compliance with the requirements of the vehicle manufacturer specifications and maintenance intervals. It's important to know Each type of liquid is its color. There are rare cases when the type is tinted with different color.
The color of red antifreeze can be from violet to light vehicle (in green and yellow the same principles).
Mix liquid from different manufacturers - canIf their types correspond to the mixing conditions. G11 can be mixed with analogs G11 G11 can not be mixed with G12 G11 can be mixed G12 + G11 you can mix G12 ++ G11 can be mixed G13 G12 can be mixed with analogs G12 G12 can not be mixed with G11 G12 can be mixed with G12 + G12 can not be mixed with G12 ++ G12 can not be mixed with G13 G12 +, G12 ++ and G13 can be mixed with each other. Antifreeze with Tosol is not allowed. No way! Tosol and antifreeze are very different in quality. Tosol is the trade name of the traditional type (TL) of the cooling fluid of the old sample. At the end of the service life - the liquid is completely discolored or faster. Before replacing one type of liquid to another, rinse the car radiator with ordinary water.

Antifreeze is an unimportant technological fluid that serves to cool the engine. Due to its composition, protects the power unit and its components from corrosion, the more extended engine life.

Duration of replacement of antifreeze in Hyundai

Hyundai iX35 cooling system when assembling a blue-green antifreeze is poured at the factory. Specialists Recommended Shell 5901060010266 Antifreeze-concentrate "Antifreeze Concentrate. An acceptable is the red-colored antifreeze Glycoshell Longlife Concentrate. In order to find out what the refrigerant is needed, you need to find out which one was flooded before. What amount will required refrigerant? The volume of antifreeze for Hyundai IX35 in a car with a 2.0 l - 6.8 liter engine. According to the regulations, the replacement of the coolant in Hyundai Ay Xa 35 should be carried out every 3-5 years, but if necessary, it can be pouring it.

Replacing the coolant in Hyundai Ay X 35

Antifreeze, being a working fluid, circulates in the liquid engine cooling system. If there is an insufficient level of coolant in the system if the fluid hit the air if the refrigerant lost its anti-corrosion and cooling properties, the engine cannot work properly in an acceptable temperature mode.

What problems may arise?

The common cause associated with the faulty work of the cooling system is the appearance of leaks. This question requires an immediate solution, since the engine can overheat at an inappropriate moment, and the situation will end it with a breakdown. Therefore, it is important to find a flow and eliminate it immediately.

Causes of refrigerant leaks There may be different, the most common:

• the cooling system elements served their time and need to be replaced;
• mechanical damage;
• after repair work and the assembly of all parts, errors were allowed;
• violated the rules for using the car;
• depressurization of the cooling system.

Signs The reasons described above are different, for example, antifreeze level In an expansion tank. If it is constantly reduced (there is no change in the level of level due to external temperature fluctuations), then should look for the cause.

Another sign of leaks is cluster of wet spots and the appearance of refrigerant drops. Help solve the situation should visual inspection, if this is not enough, then all components of the engine cooling system are checked.

Leak antifreeze may looseness of the connection of the pipes Or wear the items that need to be replaced. In some cases, it will be easy to tighten them more densely.

Co. is drunk and due to problems with gasket. Usually this problem occurs on those cars where the mileage is more than 100 thousand km.

The most serious problem of leaks antifreeze can become Cylinder block or head crack. This can lead to mixing oil and antifreeze (in this one can make sure that the amount of oil can be verified), which in turn means the engine, or it comes at all.

Develop a flow will also help special dyes that are sold in specialized stores. Pour the liquid is allowed in the existing antifreeze, as a result - will indicate the leaks.

Replacing antifreeze for Hyundai IX35 is necessary for the following reasons:

• the specified service life has ended. Even if no leaks are observed, the concentration of inhibitors in it decreases, respectively, heat transfer decreases;
• because of the leaks, the refrigerant level was significantly reduced when it should remain constant (there is no decrease in the coolant due to temperature fluctuations);
• the level of antifreeze decreased due to the permanent operation of the engine and overheating of the engine (the safety valve opens, the antifreeze is discerned into the atmosphere);
• repair work - current and forced, engine cooling system;
• often began to work the radiator electric fan in the heat. If antifreeze is not replaced on Hyundai Tucson or IX35, this will lead to the danger of overheating of the engine in heat or defrosting at low temperatures.

Safety technique When performing work on the replacement of antifreeze on Hyundai IX35:

• before the start of any work on replacing the coolant, the engine is allowed to cool half an hour and more;
• slowly open the expansion tank cover to avoid splashing antifreeze, as the liquid of poisonous;
• in the cold season, it is not recommended to tosses in antifreeze ordinary or purified water. The concentration of fluid is disturbed, and water in the engine cooling system will begin to freeze;
• when changing the type of antifreeze used, the engine cooling system should be completely flushed.

List of tools To replace antifreeze in Hyundai:

• Antifreeze (or acquired a pre-diluted, or a concentrate is bought, which is diluted in the proportion recommended by the manufacturer, often it is 1 to 1);
• Screwdriver;
• Passatia;
• The container in which the exhaust antifreeze will merge. Perfect canister in size, cut;
• Funnel;
• Gloves;
• Pure material from natural fabrics;
• Set of car horn or car keys.

Stage First

Before making a drainage of antifreeze from the Hyundai IX35 tank, the engine must be saved, not less than half an hour. Starting the action to complete cooling, the liquid in the cooling system under pressure can spill out of the tank and burn the hands and face of the car owner. And yet, in case of entering a poisonous liquid to the skin of the hands, it is necessary to immediately wash the sections with cold running water and seek help in the medical center.

Also during the drain and fill of the new refrigerant, it is recommended not to leave a canister with a liquid open. The contents can shed to the ground or the floor, after which it is almost impossible to flush the site, since the liquid is quickly absorbed.

Step-by-step instructions How to merge the old liquid from the car:

• Paving to cool the engine, the lid of the plug-in the expansion tank is removed. The lid turns several times counterclockwise, after it should wait a certain amount of time to reset the pressure in the system. After that, you must unscrew the lid and remove it to the side;
• The car for the convenience of the drain is installed on axial backups;
• The central panel is removed at the bottom of the radiator by unscrewing the holding bolts and the release of the panel from the clips;
• Under the lower right of the radiator, the drainage capacity of the required volume is established;
• Unscrew the drain plug in the lower tank of the radiator and allow the refrigerant to reveal into the container;
• After completely draining the liquid from the radiator, set the drain container under the drain plug of the cylinder block. Removing the plugs, give the removal antifreeze in full;
• Muffd up and tightly tighten the drain plugs of the radiator and the cylinder block.

So, according to the condition of the fluid, the owner of the car understands whether to wash the engine cooling system or not. In some cases, the fluid flows either with a thin jet, or does not flow at all. In this case, it is concluded that the system is clogged and requires immediate washing.

Stage two

The efficiency of the cooling system is significantly discussed in the event that the system was not flushed for a long time or if antifreeze density decreases. So, for the indicated reason, rust is formed on the walls of the cooling channels, scale, salt sediments, etc. The engine cooling system is adjusted immediately after washing. It is recommended to rinse the radiator and the engine separately, so as not to climb the entire cooling system Hyundai IX35.

Rinse the system is required in the case of transition from one refrigerant to another. This will help remove the protective layer and the remains of the old antifreeze. To ensure the quality of purification, you can use a special flushing agent that is diluted with water in the proportion indicated on the package.

Step-by-step instructions for washing the engine cooling system and the radiator is further alternately.

Sequence of action when washing the radiator:

• First you need to disconnect the upper and lower hoses from the radiator;
• A pre-prepared hose is inserted into the top nozzle of the radiator through which the flow of pure water is directed. Flushing is carried out until pure water will be poured from the lower hole of the radiator;
• If pure water does not become and continues to flow into the muddy water, then rinse the radiator is necessary using the Washing agent HOLTS RADFLUSH or HOLTS SPEEDFLUSH;
• Follow the manufacturer's instructions. In the event that pollution is strong, the radiator is fully removed and its anti-rinsing is carried out.

Sequence of action when washing the car engine:

In case the flushing is carried out not just water, but a flushing fluid, several nuances are taken into account. The finished means is poured into the expansion tank of the radiator, which is pre-warmed to the operating temperature. Next, the thermostat and antifreeze circulates in the circle of the cooling system.

After that, the engine is raised and left in working condition at idle for 30 minutes. Focusing on the composition of the flowing fluid, a decision is made about whether it is required to repeat the procedure or not. If the flushing is carried out more than once, the flushing agent is used only in the first approach, and then only distilled water. When replacing antifreeze on Hyundai iX35, together with washing, the driver should place time - 1.5 hours.

Stage Third

Before you begin to fill the coolant system, it is checked, the clamps are tightly tightly and the hoses are twisted.

Step-by-step instructions for filling new antifreeze:

• Antifreeze is diluted in a separate container - the concentrate is added to which the water is poured so that in the end it turned out 6.5 - 7 liters of ready-made coolant;
• The refrigerant is slowly poured through the shuffling throat of the expansion tank. Do not hurry to pour liquid quickly so that the air from the cooling channels can go out. Pour the content to the maximum marker existing on the walls of the expansion tank;
• Firmly tighten the lid of the expansion tank;
• Run the engine and leave in working condition on fast idling until it turns on and the cooling system fan does not turn off. At this time, the air remaining in the system should be completely out of it;
• Stop the motor;
• After the engine is cooled, the refrigerant level is checked. It is required to add if the fluid has decreased in volume. Experts recommend using a car for several days, after which they re-check the level of coolant. If necessary, add over the same scheme.

After the required filling of the system by the refrigerant, the label must be attached to the dummy throat of the expansion tank. It is indicated on it, the concentration of coolant in the system, the replacement date. Further manipulations with coolant should occur, focusing on this information. It is preferable to use the cooler of the same type. If you are replaced, the system is completely pre-washed.

How to remove an air stop from the cooling system?

Air traffic jams in the engine cooling system - the problem is common. Causes of the formation of traffic jams and ways to eliminate them further.

Causes of occurrence:

• the replacement of the coolant or its topping, the driver did not poured the refrigerant into the expansion tank slowly so that the air could get out;
• depressurization of connections / motor cooling connections;
• seals and gaskets are worn, their life has ended, therefore the tightness of the pump is broken;
• sticking the air valve in the expansion tank;
• an accident or accident occurred, which led to mechanical damage;
• permanent elevated temperatures spoiled polymeric material;
• putting the cylinder head gasket.

Administration of air traffic jams There is at least a few, we give one of them:

• the car is installed on a flat surface (in some cases you can use a viewing pit), squeeze the handbrake, turn on the neutral;
• the engine warms up to 90 degrees, it is necessary for the thermostat and fluid circulated over a large circle;
• the lid of the expansion tank remains untouched;
• drown the engine;
• release the clamp on the throttle node pipe, remove the nozzle. Compliance with security measures at this stage is especially important, as you can get burns. Pre-worn gloves;
• the rubber hose is removed, wait until it is with antifreeze, will come out with it;
• wear the pipe, clamp the clamp;
• start the engine. You can ride at low speed to check the system completely and make sure that the actions produced helped.

The driver must carry out the timely care and inspection of the car to eliminate such problems as air traffic jams. The cause of their appearance can be the leakage of antifreeze. To detect signs, it is enough to look under the hood.

The motorist should be preferred when choosing a refrigerant with high-quality brands, as the cheap antifreeze is not able to cope with cooling and contributes to the blockage of the channels in the cooling shirt. In order to avoid such a problem, the owners of the car are recommended to install double filters.

The replacement of antifreeze (coolant) on Hyundai IX35 must be made at least 2 times a year: in spring and autumn. If a year, the car drives more than 50 thousand km, then the replacement of antifreeze on Hyundai IX35, it is better to do 3 times a year.

If there is no information about how antifreeze is to fill in Hyundai IX35, contact our stations and we will pick up the antifreeze of the necessary brand and the required tolerances. In no case, it is impossible to top up the antifreeze if you are not sure that now is flooded. If you mix antifreeze of different tolerances, then the consequences will be very sad. At best, repairing the cooling system, at worst - will have to do the repair of the engine.

Antifreeze replacement cost:

Type of work:	Replacement
Replacing antifreeze	from 800 rubles.
Replacing antifreeze with washing	from 1200 rubles.

Where to change Antifreeze Hyundai IX35 in St. Petersburg:

If the antifreeze has passed sharply or the level is constantly decreasing and should be treated, urgently contact a hundred. If it is not noticed that there is little antifreeze in time, and in the machine there is no antifreeze level sensor and the engine temperature sensor, the CPC will overheat and it will again lead to expensive repair.

When to make a replacement:
- antifreeze constantly goes somewhere;
- muddy color of antifreeze;
- the presence of foam, precipitation, etc. in an expansion tank;

IMPORTANT!!! Once again - if you are not sure which antifreeze is flooded, do not pour anything there, refer to a hundred to replace antifreeze.

140 ..

Hyundai IX35 2015. Manual - Part 139

Maintenance

If it is near the label
"L" (low), a fraction of such a number
oils so that the level rose to
tags "f" (full). Do not pour
excess oil.

To prevent spill
oils on engine elements
use a funnel.

motor oils brands. (Cm.

rial and information about volumes "in

section 8).

Replacing motor oil and
filter

CAUTION

With prolonged contact with
skin worked motors
oil can cause
skin irritation or cancer.
Exhausted motor oil
contains chemicals
who caused u
laboratory animals
cancer cancer. To
protect skin carefully
wash your hands with soap in warm
water immediately after working with
exhaust oil.

Maintenance

Fluid cooling system

In the cooling system high
pressure enters the tank filled
all-weather cooling fluid
low freezing temperature.
Cooling fluid is poured into
tank at the factory.
Check the degree of protection against
freezing and cooling level
fluids at least once a year,
before the start of the winter season or
before traveling to areas with cold
climate.

Checking the cooling level
liquids

(Continued)
Turn off the engine I.

wait until it cools.
Removing the radiator lid,
show special care

. Wrap the cover
thick cloth and slowly
touch it counterclockwise
arrows to first stop.
Go aside until it is
embossing
pressure in the system
cooling. Making sure that
pressure Released, click
on the radiator lid,
using thick tissue, and
continuing rotation against
clockwise, remove
lid.

Even if the engine is off

chen, do not remove the lid
radiator or drain
plug while the engine and
the radiator is not cooled. Before
moment hot cooling
liquid and steam leaving
under pressure, can lead
to serious injury.

CAUTION

Removing the lid.
radiator

Do not open the lid

radiator with running
or hot engine. it
may damage
cooling systems I.
engine, and can also become
the cause of severe injuries in
a result of the emission of hot
coolant or
couple.

(Continued)

ATTENTION

If the engine overheated in

low level result
coolant,
with rapid addition
large number
coolant B.
engine may form

-

cracked. For
prevent damage
cooling fluid

-

blows add slow
small portions.

It is unacceptable to run

engine without coolant
liquids. It may
lead to malfunction
water pump and to
engine jamming.

Maintenance

Check the condition of all hoses
cooling and heating systems, and
also their connections. Replace everything
worn or having bloat
hoses.
Cooling fluid level
must be between the marks
"L (low)" and "f (full)" on the wall
expansion Tank with Cold
engine.

If the coolant level
low, decrease enough

recommended cooling
liquids to ensure protection from
freezing and corrosion. Bring
level up to the label "F (full)" but not
pour over sufficient number
liquids. If cooling
liquid has often to replenish
we recommend contacting K.
authorized Hyundai dealer
to check the system.

When adding cooling

liquids should be used
only deionized or
soft water. Forbidden
add rigid water into
original cooling
liquid. Mixing errors
cooling fluid can
lead to serious
faults or damage
engine.

Car engine has

aluminum parts and should be
protected from corrosion and freezing
cooling fluid
based on ethylene glycol.

CAUTION

Work of the electric motor
(cooling Fan)
controlled
tEME PE E R A T U R O Y

coolant
engine, refrigerant pressure
and car speed. Sometimes
he can work even then
when the engine is muffled. Need to
observe the limit
caution when working near
fan blades so that not
suffer from rotating
fan blades. For
reduced temperature
coolant
electric motor automatically
disabled. This is normal
phenomenon.
If you have in your car
GDI, electric motor (fan
cooling) can work up
then until it is disabled
negative cable
battery.

Maintenance

Do not use

methyl and ethyl alcohols, and
also add them to recommended

fight coolants.

Do not use solutions,

which contain more than 60%
or less than 35% antifreeze,
as they possess
reduced efficiency.

Percentage of components
the mixture is given in the following
table.

Replacing coolant

ATTENTION

Wrap the neck of the radiator
thick cloth before
pour the cooler in order to
prevent overflow
cooler through the neck and
getting it to other parts
engine, in particular, in
generator.

Careful

- Salary liquid

Do not pour cooling

radiator liquid or
antifreeze in the washer tank.

Coolant

radiator can seriously
worsen visibility
spray it on wind
glass and cause loss
car control or
hang paintwork
body coating and trim.

CAUTION

Radiator cover

Do not open the radiator lid
with hot engine and
radiator. Hot cooling
liquid and steam leaving under
pressure, can lead to
serious injury.

Temperature

surrounding

air

Percentage

components of the mixture (volume)