Filling volumes Toyota Land Cruiser Prado 150. Recommended Motor Oil for Toyota Land Cruiser Prado

22.06.2021

Land Cruiser Prado 150 - Reliable Fourth Generation SUV from Japanese Toyota AutoContrace. Since 2012, in the plant in Vladivostok, the auto equipment was made by gasoline 1gr-Fe (4 L), 2TR-FE, (2.7) l. and 1KD-FTV turbodiesel engine (3 l). In this case, we show how to replace the oil in the 1KD-FTV diesel engine.

When, how much and which oil is needed for Prado 150 (diesel)

In order to correctly pick up the oil for replacement, you must use the instructions of the attached to your car.

If your car is on warranty service, the use of oils of other manufacturers is not recommended.

For the diesel engine 1KD-FTV and its modifications: KDJ150R-GKFEYW, KDJ150R-GKAEYW, KDJ150L-GKFEYW, KDJ150GKAEYW, KDJ155R-GJFEYW, KDJ155R-GJAEYW, KDJ155L-GJFEYW and KDJ155L-GJAEYW, the best alternative to replace will be the original engine oil «Toyota Genuine Motor Oil. " Also, after the warranty is completed, you can use equivalent engine oil concerning the quality requirements for the API and the viscosity of the oil.

For a full-fledged replacement, such types of oils are suitable: G-DLD-1, API CF-4, CF or ACEA B1, as a last resort, you can use the CE or CD API brands. The recommended oil viscosity should correspond to the temperature regime of the car operating conditions.

For example, when using an oil with a viscosity of SAE 10W-30 or higher at extremely low temperatures, it is difficult to launch a 1KD-FTV engine.

In accordance with the instructions, the filling volume of lubrication will be:

to replace with a filter 7.0 l;
for replacement without filter 6.7 liters.

Required tools and materials for replacing oil

Tools required for oil replacement:

24 mm key;
oil filter puller;
plum packaging;
rag;
new oil filter and oil.

Catalog supplies:

Original Toyota Motor Oil engine oil (5 liter canister) Article - 888080375 will cost about 2650 rubles. On the replacement of the original, with savings of 200 rubles, you can take from the manufacturer Ravenol 4014835723559 - the price of such an oil is 2450 rubles. Original oil filter for the Toyota 9091520003 engine. The price is 900 rubles. Analogs: MANN-FILTER W71283 - 240 rubles, Bosch 451103276 - 110 rubles. Original gasket under the firm hole bolt - Toyota 90430-22003, at a price of 64 rubles.

Prices are for the summer of 2017 for Moscow and the region.

etlib.ru.

Recommendations for replacing engine oil in the Toyota Land Cruiser Prado car engine

Toyota Land Cruiser Prado cars are used not only in great demand, but also tremendous respect. This is a major SUV with good technical characteristics, reliable power units, comfortable salon and characterized by impressive durability. Therefore, even samples from the 90s are still in demand, are in excellent condition and may encounter many modern cars.

Operating conditions affect motor oil replacement frequency in Toyota Land Cruiser Prado.

Tasks of motor oils

But that the car serve for a long time and efficiently, appropriate care is required. One of the main conditions for the preservation of motor performance is the timely replacement of motor, transmission oils and other consumables. Not every car owner knows which oils to pour into Toyota Prado 150 with a diesel engine, which often arises problems, you need to contact car services. The content of such a car is not from cheap, because every visit to one hundred flies the owner into a large amount. Timely replacement and competent selection of engine oil for the Toyota Prado car allows:

maintain the performance of all engine elements;
cool the system;
ensure the work of other nodes associated with the power unit;
maintain the optimal level of working fluids;
maintain the initial power of the engine;
guarantee high car dynamics;
prevent serious breakdowns and expensive repair.

Because the owners of Toyota Prado is important to monitor the condition of the car, on time to change the oil in the engine and use only the composition recommended by the manufacturer.

Periodicity of oil replacement

If you ignore the need for a change of engine oil, it will gradually begin to thicken, change its consistency and lose physico-chemical properties. Dust, dirt, chip particles formed as a result of friction of the force aggregate parts will fall into the fluid. All this negatively reflects on the operational parameters of the car, regardless of the engine installed on the "Toyota". Ends such a negligence attitude to the SUV battalion of the motor and expensive overhaul.

On new engines, the oil replacement is carried out about once every 10,000 mileage kilometers. But this figure can decrease to 5 - 7 thousand kilometers, depending on the age of the machine, the current state of the engine and a number of other factors. There are drivers who do not roll over the year these 5 - 10 thousand kilometers. Then they change the oil by temporary indicators, that is, once a year. For the frequency of replacement of engine oil in the engine "Toyota Land Cruiser Prado" are influenced by such factors:

the quality of the used lubricating fluid in the motor;
the intensity of the operation of the machine;
current technical condition;
seasonality;
sharp temperature differences;
driving style aggressiveness;
road quality;
used fuel;
long-term simple machine in the garage or parking;
frequent riding on mountain and hilly sites;
regular car overload by weight (riding with lots of cargo, continuous use of the trailer).

Choosing engine oil

The first, where to start, this is a choice of fresh liquid for filling into the engine. Owners of the SUVs "Prado" are interested in which oil pour into the engine, and how attention should be paid to which characteristics. According to official operating manuals, which make the manufacturer represented by Toyota to their SUVs, the degree of viscosity of the engine fluid must be:

The recommended viscosity of the car and temperature, in which the car is operated, are closely connected with each other. Therefore, for each viscosity parameter, the engine fluid has its recommended temperature limits. The choice in many ways depends on what region you live, however there is severe winters or a mild climate with a sufficiently high temperature even in winter. The Japanese automaker is recommended to pour into power units of SUVs "Land Cruiser Prado" Original oils that wear the corresponding Toyota Motor Oil name with suitable season and engine characteristics, viscosity, quality class, etc.

But the problem is that such original liquids are quite expensive. There are many worthy analogs in the market for a smaller price. But too cheap it is not recommended, since their effectiveness will be noticeably lower, which will negatively affect the resource and quality of the operation of the power plant. Therefore, the optimal alternative for official engine oil from Toyota is considered:

Mobil;
Shell;
Total;
LIQUI MOLY;
Castrol.

Choose among these manufacturers, pushing out the recommended characteristics of motor lubricants for your Prado.

Volume of fueling oil

This question is the most relevant, because for different engines and generations there are scores of lubrication. Today there is a total of 3 generations "Prado", not counting restyling versions:

90 "Cruisers" are no longer so relevant and rarely found. Each of the last two generations is widely represented in the market of new and used cars, because it will be relevant to tell about the versions and engines that they can be completed. The volume will be indicated by two digits. The smaller provides for the required amount without replacing the filter, and the big figure indicates how much the lubricants with a simultaneous change of oil filter will be needed.

Let's say in advance that when changing lubricants in the power unit, it is recommended to change the filters in parallel. This is also a consumable element that has a limited service life.

120 (2002 - 2009 Model years)

in gasoline engines "Prado 120" with a volume of 2.7 liters with a capacity of 163 liters. from. poured 5.1 - 5.8 liters. lubricants;
in a 3-liter diesel from 173 hp from 6.7 to 7.0 liters of engine oil;
prado 120 gasoline engine for 4.0 liters and 249 horsepower requires 4.9 - 5.2 liters. Oil.

150 (2009 - 2013 Model years)

the gasoline 163-strong engine is poured 5-5.7 liters. lubricants;
diesel by 3.0 liters and 173 liters. from. requires 6.7 - 7 liters of fluid;
gasoline 4.0-liter motor with 282 liters. from. Needs 5.7 - 6.1 liters. Oil.

150 (2013 - 2015 Model Years)

junior gasoline engine by 2.7 liters and 163 liters. from. uses 5-5.7 liters of lubrication;
three-liter diesel at 173 liters. from. requires 6.7 - 7.0 liters;
senior gasoline engine with 282 liters. from. Filled with a lubricant by 5.7 - 6.2 liters.

In the latest generation of the Sample Gasoline Engine 2015 - 2017 model years, which has a volume of 2.7 liters and 163 horsepower power, car owners must take about 5.5 - 5.9 liters of motor lubrication. Be sure to go to Prado 120 and 150, then the oil that meets the official operating manual. Take into account the total volume of oil in the engine "Prado 120" and its latest version 150. Knowing which engine oil is better suitable for such a car, you can proceed to its self-replacement.

There is nothing difficult in this, although many owners of such cars do not bother themselves in self-maintenance of the Japanese SUV, but simply trust the work to specialists in the car service. This is largely correct if you are referring to qualified masters and official Toyota dealers having a maintenance station. But it happens so that I want or you need to change the lubricant with your own hands. To do this, you need to know which oil is already in the engine, merge it and pour fresh lubricant.

Check level and status

Each car owner is obliged to carefully follow the condition of his car, the behavior of Toyota Prado, the engine work. Many signs clearly indicate that it is time to change the oil. If you buy an SUV with hands, it makes sense to immediately change lubricant and filter. The need to replace the lubricant liquid indicate the following points:

translations begin to switch not clearly;
the engine works, but does not develop maximum revolutions;
feels the shortage of power;
grow fuel consumption indicators;
when driving, vibrations and extraneous noise occur.

Sometimes such signs speak and more serious problems. But for starters, check the level and condition of the oil. To do this, remove the special probe, which is in the pumproom space, wipe it with a dry cloth, insert into place and remove again. By labels on the dipstick you will see at what level there is a lubricant in the motor. Additionally, some oil can be dripped on white paper and carefully look at. If you see particles of garbage, dust and dirt, this indicates a clearly poor condition of the fluid. Ideally will compare the old oil with fresh. If there are significant differences in color (old more dark), be sure to replace.

The replacement of the engine fluid is somewhat different depending on the type of engine and generation of the Japanese SUV itself. But constructively in this plan, the car did not change strongly, which allows for approximately the same scheme to replace the working fluid. If the check showed that the lubricant is time to change, repel from the next algorithm of action:

The flushing stage causes logical questions that the use of chemical compositions can negatively affect the operation and state of the motor. After all, partially mixtures remain in the system, which is why they can react with new oil, foaming and lead to the formation of a new tax, sediments and pollution.

Therefore, the experienced owners of Toyota Prado advise to replace the washing mixtures with semi-synthetic or mineral oils. They are flushing, and then the working synthetic mixture is already poured. To optimize the work of "Prado" engines and prevent the premature wear of the parts due to the loss of oil of its physicochemical properties, the owners of such SUVs are worth refueling only on high-quality gas stations.

Thank you all for your attention! Subscribe to our site, leave comments, ask questions and tell about us your friends!

vIBORMASLA.RU.

Replacing the oil on Toyota Prado do it yourself

The SUV of the average size of the Japanese Toyota Concern. From the first generation, this "baby" had a high permeability during the comfort of a passenger car. Initially, the car was built on the basis of other models of Toyota, but from the third generation an independent model of Land Cruiser Prado appeared. Despite the great power and seemingly large dimensions, it is not difficult to maintain this car. Replacing the oil and filters on the service service costs the round sum, and this is not such a difficult task.

Filling volumes and oil selection

Regarding the choice of oil, then the classes of viscosity 5W-30 and 10W-30 are traditional for Prado. What viscosity to choose? Everything is simple. The viscosity of 5W-30 works well in the temperature range from -30 to +40 degrees. The viscosity of 10W-30 runs from -20 to +40.

Change oil

Video materials

If you have left or in the process of replacement, some questions have appeared, we recommend to view a great video, everything is clearly shown that and where.

masllo.com.

Replacing oil in the engine Toyota Prado

To date, the replacement of oil in the engine Toyota Prado 150 diesel is a process that is possible to carry out their own hands. This does not require special knowledge, skills or skills, just a few hours and the minimum set of tools. For high-quality replacement of lubricant material, it is clearly followed by the recommendations of professionals.

When does the oil change?

Oil replacement regulations according to the technical manual of the user accounts for 5 thousand kilometers with car intensive operation. With a rare vehicle operation, it is recommended to update the motor lubricant every 10 thousand kilometers.

Signs of the need to replace the engine oil:

Change product color.
Changing the viscosity of motor lubrication.
A mixture of fuel and engine lubricating fluid.
Visible mechanical damage in the system.
Change odor.
Reducing the amount of lubricant to the minimum mark, which is at the level of the probe.

Checking lubricant in the system should be carried out by the owner of the car on a regular basis. The frequency of replacement of motor oil each owner determines independently, it does not in practice, it does not correspond to the regulation of operation, because it depends in many respects from the style and conditions of driving, the quality of lubricating fluid and seasonal conditions.

What kind of oil to choose?

The choice of oil is a responsible process, since it depends not only from its quality and compatibility, not only the duration of the lubricant itself and the engine as a whole, but also the quality of the operation of the vehicle power unit. First of all, you should navigate to the following characteristics:

Composition: mineral or synthetic.
Viscosity.
Originality of the manufacturer.

The process of replacing the oil in the engine Toyota Prado do it yourself

Required tools for replacing the engine lubricant in the system:

Rag.
Wash liquid.
New engine lubricant.
New oil filter.
Gloves.
Canister or any pelvis.

Step-by-step instructions for replacing the engine lubricating fluid in the system should include the following steps.

Toyota Land Cruiser Prado is a full-sized SUV, very reliable and hardy, with a solid and proven design. This model is considered the most-selling SUV in Russia among classmates. This is not surprising, considering not only good ride quality and high reliability, but also the possibility of independent service, despite a rather complicated design. At least, we are talking about the performance of elementary repair procedures, such as the replacement of engine oil. In fact, every even the inexperienced owner of Toyota Land Cruiser Prado will cope with this task if you carefully read the user manual. As is known, the process of replacing the oil is preceded by the choice of oil itself. This procedure is more responsible, and requires small knowledge in the field of theory, including various parameters and standards. In this article, on the example of the Toyota Land Cruiser Prado, we consider in detail how to choose the proper engine oil, as well as how much to fill it depending on the working volume of the internal combustion and model year of the car.

Replacement frequency

It is necessary to immediately say that the official oil replacement regulation for Toyota Land Cruiser may be irrelevant if the car is often exploited in complex climatic and road zones. For example, when driving only around the city, it is enough to pay attention to the regulation, which is about 15 thousand kilometers. But since we are an SUV, it is often exploited by off-road. In this regard, a more frequent oil change may be required, since under the influence of negative factors, the liquid quickly loses its useful properties, and as a result, it becomes unusable. For example, experienced Russian owners who regularly expose their Land Cruiser extreme loads, prefer to change the oil every 7-10 thousand kilometers. When driving around the city, taking into account alternating climate, the frequency of replacement may be 10-12 thousand km.

How to determine the quality of the oil

To understand that the oil has become unusable and needs to be replaced, to do this, look at its color, and pay attention to the smell and composition of the liquid. So, if the oil is painted in a dark brown tint, and also has a specific smell of burned and contains foreign impurities (metal chips, mud deposits, soot, dust, etc.), in this case, the oil change can be immediately added to the list of the most urgent Tasks for the near future.

When need to check oil

There are several generally accepted signs, when the detection of which will not be superfluous to check the condition of the lubricant:

Fuzzy transmission
The engine is not capable of developing maximum turns.
Engine runs on incomplete power
Increased fuel consumption
High level of vibrations and noise

Types of motor oils

Only three types of lubricants are represented on the market, which are most popular among all others:

Synthetic oil is the most sought-after product among foreign cars, including all modern machines. This oil has good non-stick and nontasted properties, and due to its high yield strength, it is quite steady low temperatures. Thanks to this, the synthetics can be recommended to the owners of the Toyota Land Cruiser Prado with a small mileage, as well as for operation in the harsh winter conditions - for example, in Siberia.
Mineral oil - the complete opposite of the synthetics. In the frosty weather "mineral water" can quickly thicken, which is a dignity, and at the same time - a disadvantage. The minus is that it instantly freezes, and the plus you can call the absence of oil leaks, to which cars are prone with a large mileage. The absence of leaks is explained by excessive thickness of mineral oil, and as a result it may not pass even through the microcrack in the case. "Mineralka" is more suitable for old cars, including for Land Cruiser with a large mileage.
The semi-synthetic is quite high-quality oil, despite its weighty flaws. It consists of 70% mineral and 30% synthetic oils. It is also used for cars with high mileage. The main advantages of the semi-synthetic in the fact that such an oil is a little better with the low temperatures, and has a longer validity period.
Based on the received data on each of the three engine oils, it can be concluded that for the Toyota Land Cruiser Prado there will be a synthetic oil with a better option, and the second place is semi-synthetic.

Now consider the parameters of the engine oil, as well as how much to fill it depending on the type of engine and its working volume.

How much oily oil: generation, engines

Model range 2002-2009 (Prado 120)

For gasoline engine 2.7 2TR-FE 163 l. from.:

How much to fill 5.8 - 5.1 liters
SAE parameters - 5W-30, 10W-30
Standard API - SJ, SL, SM, SN

For diesel engine 3.0 TD 1KD-FTV 173 liters. from.:

How much to fill - 7.0 / 6.7 liters
Standards - DLD-1, ACEA B1, API CF-4, CF

For gasoline motor 1GR-FE 4.0 249 liters. from.:

How much to fill - 5.2 - 4.9 liters
SAE parameters - 15W-40, 20W-50
API standards - SJ, SL, SM, SN

Model range 2009-2013 (Prado 150)

How much to fill - 5.7-5.0 liters
Standards API - SL, SM, SN

How much to fill - 7.0-6.7 liters
SAE parameters - 5W-30, 10W-30, 15W-40, 20W-50
API standards - G-DLD-1, ACEA - B1, API - CF-4; CF.

For gasoline motor 1gr-Fe 282 liters. With 4.0 l.:

How much to fill - 6.1 - 5.7 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
Standards API - SL, SM, SN

Model range 2013 - 2015 (Prado 150 restyling)

For gasoline motor 2TR-FE 2.7 163 liters. from.:

How much to fill - 5.7-5.0 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
Standards API - SL, SM, SN

For diesel engine 3.0 1KD-FTV 173 liters. from.:

How much to fill - 7.0-6.7 liters
SAE parameters - 0W-30, 5W-30, ACEA C2, 10W-30, 15W-40, 20W-50
API standards - CF-4, CF

For gasoline motor 1gr-Fe 282 liters. from.:

How much to fill - 6.2-5.7 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
Standards API - SL, SM, SN

Model range of 2015 - n. in.

For Prado 150 2.7 2TR-FE 163 l gasoline engine. from.:

How much to fill - 5.9-5.5 liters
SAE parameters - 0W-20, 5W-20, 5W-30, 10W-30
Standards API - SL, SM, SN

The best manufacturers of motor oils

When choosing an oil for Toyota Land Cruiser Prado, you should proceed from the parameters specified on the original Toyota 5W-30 product label or in the user manual. Alternatively, it is possible to prefer oil-analog, which is practically not inferior as an original oil. So, among the best manufacturers of oil makers, Lukoil, Castrol, Shell, Elf, Mobile and others can be distinguished.

When, how much and which oil is needed for Prado 150 (diesel)

In order to correctly pick up the oil for replacement, you must use the instructions of the attached to your car.

If your car is on warranty service, the use of oils of other manufacturers is not recommended.

For example, when using an oil with a viscosity of SAE 10W-30 or higher at extremely low temperatures, it is difficult to launch a 1KD-FTV engine.

In accordance with the instructions, the filling volume of lubrication will be:

to replace with a filter 7.0 l;
for replacement without filter 6.7 liters.

Required tools and materials for replacing oil

Tools required for oil replacement:

24 mm key;
oil filter puller;
plum packaging;
rag;
new oil filter and oil.

Catalog supplies:

Prices are for the summer of 2017 for Moscow and the region.

Remove the hatch cover of the crankcase.

We find a drain plug over it, unscrew it.

We drain the oil into the substituted container.

While the oil is merged, we find the filter under the hood, unscrew it with the cover, this is done using the key with the extension.

Give the filter gently so as not to shed the oil inside.

With the help of the compressor with a tube, pump out the oil residues.

Get a new filter from the package and lubricate the gum.

Motor oil, volume to replace 7 liters. The car can be equipped with a scene filter (looks like a liter barrel at 5-10 and stands on the place where the gasoline cars are catalyst). In this case, the manufacturer recommends Jaso DL-1 tolerance. This is not only low ash content, but also a package of additives aimed at reducing the wear of the Japanese diesel engine, which is constructively different from European.Motor oils are recommended from European oils with ACEA C2 tolerance. If there is no particulate filter, use oils with API CF / CF-4 tolerances. The pledge of the long service of the motor is a frequent change of oil, we recommend 5-7 thousand km.

Oil in automatic transmission, total volume10.6 L. . Toyota WS type liquid or analogue is used. Replacement Recommendations: Partially every 30-40 thousand km On machines with decent mileage, we recommend putting an outer oil filter.

Oil in the rear axle, Volume 2.1 - 2.75 l, only with the class APIGL-5.. Replacement every 20-30 thousand km. All options are presented below.

Oil in front gear, volume 1.35 - 1.45 l, only with the class APIGL-5.. The manufacturer should pour LT 75W-85, it is common transmission oil, with a slightly reduced high-temperature viscosity.You can pour 75W-90, class GL-5. Replacement every 20-30 thousand km.

Oil in the dispensing boxThe volume is 1.4 liters.The VF4BM rattage is installed, the modified version of the one that was put on the previous body. Distribution is controlled by brains electronically, blocking the inter-axis differential. Otherwise, the crushing retained the former design. Due to these changes and a general tendency to reduce viscosity, Toyota oils recommends using oil for dispensing . Some owners pour the traditional 75W-90 with the GL-4 class.Replacement every 40-60 thousand km (each second replacement in the front and rear gearboxes).

Antifreeze, the volume of the total 13.1 - 15 liters (with the front heater); 15 liters (two heater - front and rear). The manufacturer recommended organic antifreeze of pink color with increased lifespan.Replacement recommendations - for the first time in 7-8 years, then 1 time in 3-4 years.

Oil in gur., volume is about 1 - 1.5 liters. Or special fluids with an inscription PSF, or a liquid for automatic transmission

Glow candles (incandescent) - 4 things

Brake fluid. Carefully look at the inscription on the lid of the expansion tank of the brake system. If "Only Dot-3" or "Only BF-3" is written, use only DOT-3 liquid. Replacement every two years or every 40 thousand km.

Batteries. On the diesel prado, 2 batteries are installed in the same size, but with different polarity. Pay attention to it. In the selection, these batteries go on each other.

Head light bulbs. If the Middle Light with halogen lamps, then the H11 base, if xenon, then the D4S base. Far Light only halogen lamps, HB3 base.

The formation of a durable protective film on the internal elements of the motor is possible provided that the automotive engine is applied. The film formed by oil protects the power unit from overheating and premature wear. Our article describes the characteristics of the recommended engine oil for Toyota Prado.

Model 2001 release.

Gasoline power units

Scheme 1. Recommended viscosity for 5VZ-FE engines.

Based on the scheme 1, the All-season 5W-30 car is poured at temperatures below +8 0 s, it is perfect for the winter. At the same time, 10W-30 is used at a temperature indicator above -18 0 C.

Scheme 2. Recommended viscosity for 3RZ-FE motors.

According to Scheme 2, for very low temperatures, it is worth using 5W-30 auto-30, and at temperatures above -18 0 s use lubricants 10W-30, 15W-40, 20W-50.

Diesel Automotives

According to the manual to engine oils for diesel engines 1KD-FTV and 1KZ-TE Toyota Prado, the manufacturer's plans are made by the following requirements:

lubrication must comply with G-DLD-1 standards;
types of CF-4 or CF lubricants via the API system (sometimes it is allowed to apply CE or CD).

The selection of viscosity for 1KD-FTV engines is performed according to Scheme 3, and for 1KZ-TE engine according to Scheme 4.

Scheme 3. The dependence of the viscosity lubricant indicator (for 1KD-FTV engines) from the temperature overboard the machine.

In accordance with the scheme 3, the manufacturer of Toyota Prado is recommended to fill the oil 5W-30 for a wide range of temperatures from -29 0 s (and less) to +38 0 s (and more). And liquids 10W-30, 15W-40, 20W-50 are applied provided that the thermometer is above -18 0 C.

Scheme 4. Effect of ambient temperature on the selection of viscosity of the engine fluid for 1KZ-TE engine.

According to Scheme 4, it is necessary to use lubricants 5W-30 at a temperature indicator below +8 0 C, and oil 10W-30, 15W-40, 20W-50 use at temperatures above -18 0 C.

Filling volumes

Filling tanks for Toyota Prado:

1KD-FTV power units:

7.0 l with the oil filter replacement;
6.7 liters excluding filtering elimination.

1KZ-TE engines:

7.0 l with replacing the oil filter;
6.3 liters without taking into account the oil filter.

5VZ-FE auto motories:

5.2 l with an oil filter;
4.9 liters without oil filter.

Engines 3RZ-Fe:

4.7 without oil filter;
5.4 with the replacement of the oil filter.

The volume of engine oil between the maximum and "minimum" marks on the measuring probe for Toyota Prado cars is:

1.5 l for 1KD-FTV motors;
1.2 L if 1KZ-TE auto motors.

Toyota Prado 120 2002-2009 release

Model 2001 release.

Gasoline engines

According to the operating instructions, the recommended motor oil for Toyota Prado must comply with the parameters:

original Toyota Genuine Motor Oil Oils or equivalent lubricants satisfying the requirements of the car manufacturer to the quality of lubricants:
universal motor fluids of class SL or SJ with the inscription "ENERGY CONSERVING" (ENERGY Saving) according to API standards;
motor lubricants certified by ILSAC.

The selection of viscosity of the machine is made according to Scheme 5.

Scheme 5. Recommended viscosity for gasoline engines Toyota Prado.

According to Scheme 5, if you fill the motor fluids 10W-30, 15W-40, 20W-50 at very low temperatures, the start of the engine will be carried out with difficulty. For temperatures below +8 0 C is recommended to pour 5W-30.

Diesel power units

By manual for diesel engines it is necessary to use auto-settings with parameters:

fluids corresponding to the class G-DLD-1;
cF-4 or CF Classification Classes by API Classification (permissible to use CE or CD).

Use the Scheme 5 to select Viscosity.

Filling volumes

The volume of oil between the maximum marker and the minimum on the probe Toyota Prado is:

1.3 L if 2TR-Fe engines
1.5 l in the case of 1gr-Fe or 5L-E engines;
1.2 l for 1KZ-TE motors.

Toyota Prado 150 since 2009

Model 2012 release.

1gr-Fe gasoline Automotives (GRJ150L-GKTEKW and GRJ150L-GKTEK models)

In Manual Toyota Prado, such requirements for lubricant materials are indicated:

toyota Genuine Motor Oil branded lubricants or equivalent to them by parameters;
sL or SM motor fluid class with an inscription "Energy Conserving" (energy-saving) or SN with the designation "Resource-Conserving" (resource-saving) according to normal
fluids corresponding to the requirements of ILSAC and having a viscosity of 15W-40.

You can choose the viscosity of the machine for the GRJ150L-GKTEKW model according to Scheme 6, and for the GRJ150L-GKTEK model according to the scheme 7.

Scheme 6. Recommended viscosity of the engine fluid for the GRJ150L-GKTEKW model.

The manufacturer in the machine manual indicates that it is preferable to pour liquids 0W-20, they are designed for a wide range of temperatures from -18 0 s (and less) to +27 0 s (and more). If there are no 0W-20 automal, then you can use 5W-30, but with the next replacement it is necessary to pour 0W-20. Fluids 10W-30, 15W-40 pour at the air temperature more -18 0 s, 15W-40 is better pouring for the summer.

Scheme 7. Recommended vehicle viscosity for the GRJ150L-GKTEK model.

According to Scheme 7, at a temperature indicator below +10 0 ° C is used 5W-30. If the air temperature is higher than -18 0 C poured 10W-30 or 15W-40.

2TR-FE gasoline engines

According to the instructions, Toyota Prado need to use oils with characteristics:

the type of SL or SM machine with the designation "ENERGY CONSERVING" (energy-saving) or SN with the "Resource-Conserving" labeling (resource-saving) on \u200b\u200bthe standards of the API;
automoles that meet the requirements of ILSAC and having a viscosity of 15W-40.

To select the viscous parameters of engine oil, use the circuit 8.

Scheme 8. The recommended viscosity of the car and the temperature at which it is permissible to use.

With extremely low temperatures, it is recommended to use 0W-20, 5W-20, 5W-30 to ensure quick engine starting. With the thermometer indicator above -18 0, it is advisable to use 10W-30 or 15W-40.

Diesel 1KD-FTV auto motors (model KDJ150L-GKFEYW and KDJ150L-GKAEYW)

According to Manual for Toyota Land Cruiser Prado Plant Manufacturer It is recommended to pour auto-chalk, having characteristics:

original Toyota Genuine Motor Oil lubricants or equivalent to them by oil parameters;
CF-4 or CF by API classification;
B1 according to ASA standards.

To select viscosity, use a scheme 9.

Scheme 9. Recommended viscosity of the car depending on the temperature overboard the machine.

Based on the scheme 9, with extremely low temperatures, it is preferable to pour 5W-30, while the lubricating fluids 10W-30 or 15W-40 will not provide a quick start of the engine, they are used at temperatures above -18 0 s

Diesel motors 1KD-FTV (model KDJ150L-GKAEY besides confessing Euro IV)

branded Toyota Genuine Motor Oil or alternative lubricants having appropriate characteristics;
according to the classification of the CF-4 or CF lubrication API (permissible to use CE or CD);
according to the ASEA class B1.

The choice of viscosity of the lubricant is performed using the circuit 10.

Scheme 10. Recommended viscosity of the car and temperature at which it is permissible to use.

According to Scheme 10, it is preferable to apply 5W-30 vehicles at temperature from -18 0 s (and below) to +27 0 s (and above), 10W-30, 15W-40 and 20W-50 are used at temperatures above -18 0 s .

Diesel power units 1kd-FTV (model KDJ150L-GKAEY satisfying Euro IV)

lubricants corresponding to CF-4 or CF on the API system;
B1 according to ASA standards.

The viscosity of the lubricant is selected according to the scheme 9.

1GD-FTV diesel engines

original Lubricants Toyota Genuine Motor Oil or Automobile with similar characteristics;
only class C2 by ASA.

The selection of viscosity is performed according to Scheme 11.

Scheme 11. Recommended viscosity of lubricant material.

It is preferable to apply 0W-30 oils that they provide the optimal consumption of the fuel mixture by the car, as well as the rapid start of the motor in cold weather. In the absence of these lubricants, it is permissible to pour 5W-30.

Filling volumes

The volume of the engine fluid required when replaced is:

1GD-FTV engines:

7.7 liters with an oil filter;
7.2 liters without replacing the oil filter.

1KD-FTV power units:

7.0 l with an oil filter;
6.7 liters without oil filter.

Motors 2TR-FE:

5.9 l with filter;
5.5 liters without oil filter.

Silence units 1gr-Fe:

6.2 l with an oil filter;
5.7 liters without filter.

Conclusion

Recommended motor oil for Toyota Prado must have appropriate labeling, tolerances on the canister, as well as signs indicating the quality of engine oil. Figures 1, 2 and 3 show signs that simplify the choice of the consumer.

Figure 1. Automotive is certified by ILSAC.

Figure 2. API service symbol.

Figure 3. The DLD branded sign indicates that the car complies with ASEA, AAM standards, EMA, JAMA.

Similar articles: