VW Polo Ignition Candle Replacement. Candles Volkswagen Polo.

Original spark plugs on polo sedan Have factory articles 101905617C., average price - 400 rubles / pcs, or 04C905616A., 390 rubles per piece. This difference is due to the fact that, depending on the modification of the car, the candles have different threads and a little different rim.

On the VAG conveyor, these candles supplies NGK (Japan) and Bosch (Germany). The direct analog of the manufacturer is the ignition candle under the number ZFR6T-11G. (they are NGK 5960.), the price is 220 rubles. For first I. 0241135515 (320 rubles / pcs.) For the second.

Candles ignition polo sedan 1.6

On Volkswagen Polo Sedan 1.6, depending on the engine installed on it (CFNA, CFNB, CWVA, CWVB), two different spark plugs are set.

In motors CWVA and CWVB with article VAG 04C905616. They are nickel, have one side electrode, tightening torque in 23 nm. Similar candles can be found under the article 04C905616A (Bosch manufacturer). True, they will be distinguished by a caliling number (7 against 6 in factory), due to the fact that in Europe the winter is less severe.

In the cold period of the year (or in cold climatic latitudes), drivers recommend putting the candles "I'm joking", that is, it is those where the gallinal number is lower (04C905616), and in a fierce conditions, the candles "cooler" are suitable - VAG 04C905616A (in the bosch catalog Y6LER02 ).

In addition to these candles, for CWVA and CWVB, the manufacturer still produces the original spare part under the article VAG 04C905616D (in the Bosch Y7LER02 directory), they are also as with the "A" index have an increased service life (Long Life).

On polo sedan with engines CFNA and CFNB Manufacturer Installs Candles under Article 101905617C Or you can meet more VAG 101905601F.which are so original. These are also ordinary single-contact nickel candles, screwed up with a torque of 28 nm.

The difference between the two models of spare parts in the manufacturer. First 101905617C. Releases NGK (direct analogue - ZFR6T-11G, or another encoding - 5960, price - 230 rubles / pc.). Second, 101905601F manufactures Bosch (Germany), price - 370 rub. / PC. Recommended, the closest analogue of the original candle at the manufacturer - 0242236565 (it is FR7HC +), the price is 180 rubles / pcs.

Both models of the original spark plugs have a nickel electrode, as well as the labeling "Long Life". This technology allows you to slightly extend the life of nickel candles.

Sizes of the original spark plug Polo sedan

What analogues can be put?

To increase the term of exploitation, you can also establish spark plugs with an iridium or platinum electrode. The most popular among the drivers polo sedan with Motors CFNA, CFNB - Iridiyev IK20TT., DENSO (Japan). Price - 540 rub. / PC. Also, when installing this spare part, drivers marked a slight improvement in the dynamic engine indicators. A candle with an iridium electrode can be operated up to 90 thousand km of mileage.

You can also use spark plugs with a platinum electrode. In terms of its operational characteristics, they are almost the same as iridium. At least drivers have not been noted fundamental differences. The most popular model of platinum candles for polo sedan - 0242236566 from Bosch. Average price - 380 rub. / PC.

As practice shows, spark plugs in original VAG packages are overestimated in value, because it is more expensive than its direct analogues by an average of 2 times. Therefore, you can use proven substitutes:

• KJ20DR-M11. Manufacturer - DENSO. Price - 190 rub. / PC. Resistance indicator is slightly higher than the original - 4.5 com. Has a lot of positive feedback;
• 97237 . Manufacturer company - NGK. Price - 190 rub. / PC. Of the features of this model, it is worth using the use of V-LINE technology, in which the central electrode has a V-shaped form. This design provides better flammings of the mixture, compared with conventional nickel electrodes. According to the characteristics identical to the original;
• Z 272.. Manufacturer - Beru (Germany). Price - 160 rubles / PC. This model can be attributed to the budget class. In all parameters (gap, electrode size, resistance) almost fully corresponds to the original spark plug. Also, many polo owners sedan give good reviews about this spare part.

But on the CWVA and CWVB engines, the only replacement option to more modern is the original platinum candles from VAG - 04E905601B., price - 720 rubles. / PC. With analogs, too, there is only a tight, there is only an option to install the original directly from the manufacturer.

• 0241135515 , Bosch, price - 320 rub. / PC. In fact, it is an analogue of the original candle 04C905616A. It is worth remembering that the original spare part and its analogue do not always correspond to the quality.
• 0241140519 , Bosch, price - 290 rub. / PC. Direct analogue of the original candle 04C905616.
• 96596 , Manufacturer NGK, price - 300 rub. / PC. She goes under the article zker6a-10eg. In this model, a fairly specific design is a copper core in a side electrode and a cup-shaped contact terminal.

Bosch 0241140519.

Bosch 0241135515

Spark plugs for polo sedan - what better?

If we talk about choosing the highest quality option (excluding price category), then the best option will be iridium DENSO IK20TT - on the Motors CFNA, CFNB. Moreover, they are not much more expensive from full-time candles. If you need something from the price / quality segment, then this is a spare part from NGK, for all types of engines. For CWVA and CWVB engines, the most optimal option will be the original platinum 04E905601B, which will allow them to be changed much less.

When changing spark plugs

The replacement of candles should be produced every 60 thousand km. Run. Candles with platinum or iridium electrodes can take care of 80 - 90 thousand km. When installing such spark plugs, it is recommended after a run of 60 thousand km on each subsequent then to make them check.

Hello everyone! In this material, you will learn how to replace the ignition candle on the Volkswagen Polo sedan. The procedure for replacing the spark plugs on the polo is quite simple, so any, not even the most experienced car owner can cope with it. All work takes about 15-20 minutes of time. Where to begin? You need to start with the selection of spark plugs. So, let's go.

In our case, the original VAG ignition candles with article 101 905 617 C were used. These are:

The price for the original candle in our region on 10/27/2017 amounted to 458.00 rubles. Total for the kit: 458 x 4 \u003d 1832.00 rubles. However, if you do not want to overpay for the brand, you can easily do with analogues from other manufacturers, reducing the expenses of the expenses at times. That's what exist for us offers:

Ploxwagen Polo Sparkle Replacement Interval

Candles on VW Polo Sedan are changing through 60 thousand km of run or after 4 years of operation, depending on what comes before. But if you use your car the advantage in traffic jams or pour low-quality fuel, it is better to replace the candles a little earlier than the deadline.

Procedure for the replacement of spark plugs on Volkswagen Polo Sedan

1. Open the hood and dismantle the decorative plastic engine overlay. For this we press two locks and raise the cover up. After that, just remove it and remove to the side.

2. The plug removed by us should protect the ignition coils from dust and dirt. But if for some reason dirt got there, it is better to remove it to dismantle the ignition coils so that the dust does not get into the candlestones, and then in the cylinders.

3. Disconnect chips from ignition coils. It's just done. Just press the lock and pull the chip on yourself.

4. Use a special puller the ignition coils to pull out the coils. If there is no such, then you can use the usual flat screwdriver. Carefully use the coil with a screwdriver and pull the coil to the other hand.

5. We take the candle wrench and turn the spark plug. We install a new one in her place. Since the ignition candle regulations are rarely changing, then before installing a new candle it is best to lubricate with a special lubricant for spark plugs. Please note that it is not recommended to use the usual lithol-24 or any other lubricant, as it can bring more harm than good. If there are no special mails at hand, it is better not to lubricate anything and leave everything as it is.

6. Having wrapped the new spark plug, we repeat the similar procedure for the remaining three spark plugs.

7. Collect everything in reverse order. That's all right. On this replacement of the spark plug, the Volkswagent Polo sedan can be considered over. If you have some questions, ask them in the comments to this article. Also at the end of the article you can watch the video in which everything is described in detail. That's all! Thank you for your attention to the new meetings on our website!

Replacing Candles Ignition Volkswagen Polo Sedan - Video

The resource of original parts on such models as Volkswagen Jetta 6 depends largely on climatic conditions and on the quality of fuel. Under ideal conditions, the Volkswagen's original candles can work out 50-60 thousand km of mileage. Tips of dealers suggest that the replacement of candles on Volkswagen Jette 6 is based on the recommendations of the VAG concern, since they took into account the Russian operating conditions.

When it comes to replacing candles on VOLKSWAGEN brand cars, you can confidently say that this operation is quite simple and anywhere can perform it with your own hands. Next, we offer a detailed photo report. From it, you will learn how correctly and without unnecessary manipulations are made by replacing candles on the VW Jetta 6 atmospheric engine.

Instructions for replacement

Despite the fact that this kind of replacement is in the rank service is not very expensive and can do it specialists of any car service, it is much easier to replace the candles with their own hands. The only problem that can meet is the presence of the necessary tool. To replace the candles, you will need such tools and details as:

• long nail (approximately 100-200 mm);
• steel hook for convenient removal of polymer plugs;
• special candle wrench at 16;
• device with cardan transmission.

Replacing the candles and its order looks like this:

1. The decorative plastic plate is removed from the power unit - for this it is enough to deduct plastic fasteners.
2. After that, the panel must be moved to the side to get free access to the necessary parts and items.
3. The next step is to remove the coil from the nest, for which the key will come in handy on 16. It must be bent in the form of a hook, which is convenient to pull out the coil, hooking it for special technological holes.
4. Before you start removing the coil, you should turn off the block with wires. Despite the fact that the coil sits in the nest tightly enough, do not be afraid of something to damage when removing. It is enough just to make small efforts - and the coil will move from the spot.

How to extract old candles?

Candles on the engine Volkswagen Jetta 6 are in fairly narrow wells. Access to them is only on the top. To remove the candles, the steel key is used to rotate counterclockwise.

Sometimes it happens that it is impossible to move the candle at once. Solve this problem is quite simple. It is necessary to increase the knob of the key, ensuring a larger lever. After unscrewing the old consumables, new elements are screwed into the wells in the wells.

As practice shows, this is the only true way to be replaced by VW Jetta 6. Immediately it is worth saying that certain difficulties may occur when removing the extreme coil. Without certain skills, this process can take a lot of time and effort. As a rule, not everyone immediately turns out to disconnect the plastic retainer without damaging it.

Screwing new candles usually happens without problems. The main thing is to control the entire process and prevent damage to the thread when screwing the parts replaceable. Otherwise, this simple and quite elementary replacement procedure can grow into a longer and expensive repairs.

Replacing candles with your own hands on Volkswagen Jetta 6 - it is quite realistic to perform the task. Moreover, on the sixth generation of this car there is no big difference in what type of engine is under the hood. Since relatively previous version of VW Jetta, in the 6 series there is one and the same design of wells, in which replaceable consumables are recessed.

Replacing candles polo sedan

We proceed to replacing candles, according to the regulations, this procedure should be carried out every 60 thousand kilometers of the mileage. First of all, remove plastic decorative protection.

Removed the lid, got to the coils.

We take a screwdriver, take turns soaring the coils and raise them so that they come out of the candles from the candlestones.

The last candle is simply so possible to get it, you need to disconnect the power connector.

We take the sixteenth head of the candle, put it on the key.

Now alternately unscrew the candles.

Take out an old candle from the key, we insert the new and twist.

Having finished with candles, we collect everything back, in particular, set the coils on their places.

We put the engine cover in place. All candles are changed.

VW Polo is a quick ignition replacement.

My channel Subscribe Friends.

Volkswagen Polo Sedan Thu-2 Ignition Candle Replacement.

Detailed description as the most replace candles ignition on Volkswagen Polo Sedan.. According to the service book they ...

On the polo sedan is a gasoline engine 1.6 liters with a capacity of 105 hp To properly function all systems, it is necessary to follow the technical condition of your car. As part of preparation for periodic, the replacement of candles on the Volkswagen Polo sedan is shown.

When you need to change the candles on the polo sedan

According to the instructions for maintenance of this car, the replacement of the candles is carried out after every 60,000 km.

Installation of platinum or iridium spraying candles allow you to extend this service life. Also, on time, the replacement must be required to check the components of the ignition system parts, such as: ignition coils, candle tips and coil fuses.

Checking the candles requires a visual inspection for the presence of soot (a lot can tell the color of Nagara), oil spots and of course, the same gap.

After removing the ignition coils, in order to avoid dust and dirt in the cylinder block, it is necessary to blow with air compressed candle wells.

When checking the candles, if the gap between the electrodes is less or more than 1.0-1.1, then it is necessary to adjust it to the specified values, fading the electrode.

It is recommended, when installing new candles, apply a lubricatory paste g 052141 A2 on the ignition coil. The use of this paste prevents both the candles to the tip of the ignition coil and its threaded part.

Required tools and materials for replacement of candles

Full list What is necessary for work:

• shredded flat;
• special sleep for 16 mm candles;
• dynamometer key;
• candle stripping brush;
• set of spark plugs.

Catalog materials for replacement materials:

Original spark plugs for Volkswagen Polo Sedan: Longlife spark plug from NGK VAG101905617C ART. 101905617C and Bosch VAG101905601F ART. 101905601F at a price of 375 rubles for 1pc.

Their analogue of the production company "DENSO" Ignition Candle "Nickel" Art. KJ20DRM11 - Cost 190 rubles / pcs.; From the company NGK - 5960 worth 200 rubles per piece.

Paste lubricant VAG art. G052141A2 - price 1600 p. For a 20 gram tube, which is enough for you for a long time.

The price of spare parts is relevant for the summer of 2017 for Moscow and the region.

The stability of the Volkswagen Polo power plant depends on the state of the ignition candles. The presence of skips of a luggage of the belligent mixture leads to an increase in fuel consumption and worsens the dynamism of the car.

Therefore, the car owner should be given due attention to the state of the ignition candles. It is required to fully comply with the maintenance intervals and acquire only recommended consumables.

At the state of the spark plugs, it is possible to diagnose the power plant and its associated systems. This allows you to identify problems at an early stage and prevent excessive depreciation of the main nodes and as a result, expensive repairs. Therefore, during each replacement of spark plugs, it is necessary to carefully inspect the electrodes and, if they are abnormal state, reveal the reason for this and eliminate it.

Article and cost of original candles on Volkswagen Polo and their analogues

• VAG 101905617C. The index C at the end suggests that the candles are manufactured by NGK. The cost for one product is 370-410 rubles.
• VAG 101905601F. The letter F informs the car owner that the candles are manufactured by Bosch. The price of the consumable ranges from 400 to 440 rubles per piece.

Bosch and NGK produce spark plugs similar to the original, but under their brand. They are not inferior to VAG 101905617C and VAG 101905601F, but with it have a lower price. Their cost is from 150 to 180 rubles. Bosch spark plugs have an articial number 0242236565 or FR7HC +. NGK consumables are available with the 5960 ZFR6T11G article.

Spark plugs from third-party manufacturers who have proven themselves to Volkswagen Polo, are shown in the table below.

Table - good analogues of original spark plugs on Volkswagen Polo

Required tools and materials

In order to replace the spark plugs on the Volkswagen Polo Polo with a 1.6 liter engine, the tools and materials shown in the table below are successfully required.

Table - Tools and materials that will be required to replace the spark plugs on Volkswagen Polo

Description of the replacement of candles on Volkswagen Polo

To replace the ignition candles by car Volkswagen Polo, it is recommended to use the instructions below.

• Decorate the two locks of the decorative engine cover. In the cold time, caution should be exercised so as not to damage the plastic latches.

• Remove the decorative motor cover.

• Press the ignition coil screwdriver. Lift it a little up. It is not worth pulling too much because it is possible to damage the terminal block or wires.

• Press the lock located at the bottom of the terminal block.

• Disconnect the block from the ignition coil. To do this, pull the connector to the side.

• Pull out the ignition coil from the candle well.

• Unscrew the spark plug. To do this, it will be necessary to lengthen the candle wrench.

• Remove the spark plug from the well.

• Take a new spark plug. Lower it to the candlestone. Split it with a moment of 25 N · m. Insufficient effort when tightening the candle can lead to her shots in the hood during engine operation. The hauling is capable of damageing the thread of the planting opening in the head of the cylinder block.
• Grease the ignition coil with a special lubricant. This will reduce the risk of electrical breakdown and reduce the effect of environmental humidity.

• Lower the ignition coil into a candle well. To center smoothly over the candle. Press on top with a little effort. The presence of a click will inform the driver about the successful installation of the ignition coil into place.
• If necessary, to establish the remaining candles in the same way.
• Mount the decorative engine cover in place.