Give gloss plastic in the car. Plastic parts Auto: How to spend their polishing on perfectly? How to polish scratching

22.03.2021

When operating a vehicle, scratches appear on plastics in the car. Defects spoil the type of dashboard, and a large amount of such damage leads to the appearance of microcracks and the destruction of plastic. Knowing how to remove scratches on plastic in the car's cabin, the driver returns to the details of the initial species, avoids more serious repairs and replacing damaged elements.

Scratches on the Torpeda plastic - frequent phenomenon. Various objects, or even opening and closing doors, can cause their appearance. This is due to the fact that plastic surfaces do not have a shockproof coating, and the slightest mechanical impact leads to flaw. Small defects, deep scratches on the instrument panel spoil the view of the auto interior as a whole. but such damage can be corrected without dismantling plastic elements.

Straight sun rays lead to the burnout of the paint on the cabin elements of the car. To restore such a detail, you will need to overhaul the element.

How to remove scratches on plastic in the car

To remove scratches from plastic in the car, use several ways:

Small defects are eliminated by thermal exposure. This uses a hairdryer or lighter.
Small damage is removed by special regenerating napkins and towels.
Deep defects are painted by car wax pencils.
With glossy surfaces, scratches are removed by polyrolles and abrasive gels.
Cracks, chips and deep damage to the paint coating of the torpedoes are eliminated by capital repairs of the part.

Repair of corrugated surfaces is not possible. They are not amenable to polishing and heat treatment. When wearing such elements, they are replaced with new ones.

Restoring pencils and napkins

One of the most simple methods for restoring the type of damaged part is the use of special napkins, microfiber towels and a pencil to remove scratches from plastic. However, the use of these funds that eliminate defects has a number of nuances:

Napkins and towels are allowed to get rid of small scratches of the plastic surface of the car dealership.
Deep chips and scratches can be lured by a special pencil. These devices are sold in auto shops. The advantage of such a means consider its effectiveness. The substance fills in defects, gives the surface of the primordial appearance. However, only the original pencil can cope with the problem can cope with the problem. Its cost is high, and Chinese cheap counterparts, if the car is scattered, there can be little to help.
When painting, pick up the closest color of the pencil to the shade of the dashboard. Otherwise, after restoration, black traces remain on the surface, spoiling the type of detail.

Using a fane

Plastic damage can be eliminated with their own hands with a hair dryer. Previously before heating, the processed area is cleaned of contaminants and degrease. After, turn on the hairdryer to maximum power and very closely monitors the reaction of the plastic for heating. When exposed to high temperatures, smoothing the defects, the item acquires a primordial appearance.

If there is no reaction to heating with a hairdryer, then you need to increase the power of the device, and bring it closer to the surface being processed. Deep damage cannot be eliminated in this way. Excessive heating will lead to the deformation of the plastic element, and worsen the appearance of the detail.

Polyrols and gels

After eliminating scratches on plastic, it is necessary to refill the item. This is important when repairing glossy salon elements. The means will return the surfaces of the primordial appearance. For polishing, it is recommended to use an abrasive skirt or grinding machine. Using an electric tool cannot be eliminated by defects on the maximum turnover of the grinding circle. Plastic is heated and deformed, which will lead to expensive repair.

Also, special attention should be paid to the means used when restoring the damaged area. To protect the material from deformation or destruction, use a special abrasive paste and polyrol for plastic.

The elimination of defects is performed according to the following algorithm: before polishing the surface is washed, dried and degreased. Next cause a small amount of funds, and before the appearance of the glossy shine polished the part.

Using polishing, small scratches with a glossy surface are removed.

Removal of damage lighter

With open fire, remove scratches from plastic. For this, the lighter is made to the defect, and is carried out with a flame over the entire area of \u200b\u200bdamage. After the surface treated in this way completely cools, moistened in the alcohol with a tampon is removed soot. If everything is done correctly, then after such a procedure, plastic is restored.

When using a lighter should be careful. Otherwise, the open fire will cause damage to the trim and fire of the vehicle.

Overhaul plastic

It is not always possible to repair plastic in the cabin of the car in simple ways. Squares, cracks, sections of burnt paint - all this requires the overhaul of plastic elements of the dashboard of the car. Recovery is performed as follows:

A damaged item is dismantled.
Carefully cleaned from dirt, degreases and polished.
Cracks and chips are embarrassed by primer.
The surface is grinning.
Apply paint, give an element to dry.
Covered several layers of varnish.
Polish before the appearance of glossy glitter.

How to remove scratches from gloss

When making many elements of the cabin, transparent plastic is used. The disadvantage of such a material is the rapid appearance of defects: small scratches and chips, after several years of operation of the machine, literally cover the entire surface of the cabin element. Removal of scratches of plastic car salon has a number of nuances:

Before recovering, you need to hold a wet cleaning of the machine. It is necessary to monitor the lack of dust. Otherwise, when polishing on the surface, new scratches may appear.
The processed area will need to be carefully flushed and degreased.
To get rid of scratches, use a grinding machine.
To polish a damaged place, it is recommended to use the means that are designed for plastic grinding. These are special polishes and abrasive pastes. It is important to correctly calculate the amount of substance applied.

Abrasive pastes, gels and polishes that are intended for can not be used when restoring the cabin. They will spoil the recoverable item.

Numerous defects, scratches, chips and cracks spoil the type of torpedoes of the car. Damage to this plan is easy to eliminate yourself. In order for the repair process to be effective, and did not lead to the replacement of the part, consider the nuances of the restoration of plastic interior elements.

Plastic cleaners Apply if you need to remove the dirt on the plastic elements of the car's interior. Such as a torpedo, control panel, door map, thresholds, trunk elements or other plastic parts of the auto interior. Unlike they not only suggest the gloss, but also actually purify the surface from dirt giving a fruit or natural surface view.

Therefore, car owners have a natural question associated with the choice of certain means for cleaning and polishing plastic, because on the shelves of stores such cleaners of the plastic car salon car a huge amount. There are means for cleaning, polishing, universal, capable of cleaning not only plastic, but also leather, rubber, vinyl and other surfaces. In addition, car plastic cleaners are produced in the form of sprays (both manual and balloon) and foam compositions. Which one is better to figure it out.

On the Internet you can find a large number of contradictory reviews about various plastic cleaners of the car. Also, many car owners conduct their own tests of such funds. The material contains information about the most popular cleaners and their rating is given in accordance with their characteristics and the effect of work. If you had a personal experience of using a particular plastic cleaner, we ask you to express personal considerations in the comments.

How to use a car cleaning agent

Before moving directly to the description of the best car cleaning cleaners, it makes sense to familiarize yourself with how this tool works and how to use it. Despite the variety of grades and types, their composition is approximately the same, and it includes silicone oils, fluorine-containing polymers, moisturizers, artificial wax, flavors and additional binding components.

Note! Plastic cleaners are used for infrequent use (for example, to clean the cabin one or twice a year or in case of random one-time contamination. If you regularly take care of plastic parts of the cabin, then you need poly rays for plastic, and these are some other means.

Most cleaners not only directly wash the dried pollution on the surfaces of plastic parts, but also give them shine, antistatic properties (due to which dust does not settle), as well as protect the surfaces from the effects of ultraviolet (especially relevant for the hot season with the bright sun). As a rule, cleaners are implemented in the form of aerosols or sprays.

The method of applying these funds from the most prevailing majority. For this, a contaminated surface is applied by a certain amount of purifier, after which the time will be listed during which the composition penetrates into the dirt, driving it. Next, with the help of a vein or sponge, the resulting foam with garbage is removed from the surface. If the cleaner is also a polyrolol, then in this case it is necessary to bring the surface to the brilliance with the help of the vehicle (that is, to be confused). Before using the purchased tool (and better before the purchase), carefully read the instructions for its use. It is usually applied directly to the bottle or attached by a separate sheet in the package.

Rating of the best plastic cleaners

This rating of plastic cleaners does not have a commercial foundation, and compiled on the basis of reviews and tests of motorists who performed them at different times personally. This approach gives more or less objective information about what kind of plastic cleaner car is better. However, in various stores, the assortment of funds may differ, especially since the chemical industry does not stand still, and new formulations regularly appear on the market.

Numerous positive auto owner reviews make it possible to give this tool leading position in our ranking. This tool is a classic plastic purifier with a reducing effect. Interestingly, it can be used not only for parts of the car's cabin, but also body elements, as well as in everyday life. We apply the pray cleaner moth and for use with rubber surfaces. It has an antistatic and dirt-repellent effect.

The use algorithm is standard. Before applying the bottle with a cleaner, you must shake, after which it should be applied to a contaminated surface with a sprayer and wait a bit. Next with the help of microfiber, winds or sponge remove dirt from the surface. With a strong contamination, the procedure can be repeated two or three times.

It is realized in a 500 ml bottle with a manual sprayer. Article of goods - 7600. The price of the plastic purifier as of the summer 2018 is about 1000 rubles.

Sonax

It is a classic plastic cleaner. It has several types of flavors, so it can be used as an aromatizer. It also has polishing properties, gives plastic matte species, usually black. After use, the plastic means looks beautiful, dust does not stick to it. Plastic cleaner Sonaks can also be used in everyday life. The staff does not include silicone.

The method of applying traditional. It is necessary to apply the composition on a contaminated surface, and then wait a couple of minutes, and remove the foam with a vet. In case of severe contamination, you can use the tool twice. It is enough to remove the strongest pollution.

Silends in 300 ml springs. Article - 283200. The price of such a means for the same period is about 400 rubles.

It is a cleaner not only plastic, but also vinyl and rubber. It has not only cleansing, but also restoring effect. Great for restoring yellowed plastic. Also has a dust-repellent and dirt-repellent effect. Removes unpleasant odors in the cabin, including the smell of cigarette smoke. There are no solvents.

The method of using the cleaner is traditional. It is necessary with the help of spray to apply on the surface being processed, after which it is imposed for 2-3 minutes. After that, remove the dirt with a vet. Please note that it is impossible to make funds from the eye!

Packed in a 500 ml spray with a manual sprayer. Article - AC365. The price as of summer 2018 is about 300 rubles.

It is also a universal cleaner for both plastic and rubber and vinyl surfaces. The remedy can be used in the domestic conditions. The manufacturer allows the use of the purifier and for external plastic and rubber surfaces of cars. Very good removes silicone, fat, various technical fluids, and so on. It has a dirt and dust-repellent effect.

The use of traditional. With the help of a manual sprayer, you must apply a dirty surface. After that, wait a few minutes. Please note that removing dirt is recommended using the microfiber cloth. This gives the maximum cleansing effect.

It is implemented in 500 ml bottles with a manual sprayer. Article of goods - FG6530. Price - about 400 rubles.

Lavr.

It is not just a cleaner, but air conditioning cleaner for plastic. That is, it not only effectively cleans plastic surfaces, but eliminates unpleasant odors, including the smell of tobacco smoke, instead fills the salon with fresh aroma. The cleaner can also be used with rubber surfaces. It has a protective effect, protects surfaces from the harmful effects of ultraviolet.

Used traditionally. It is necessary to apply a certain amount of substance on the contaminated surface, wait a couple of minutes, and remove the dirt with the help of the vein. Some car enthusiasts note the low efficiency of the cleaner. However, it rather depends on the degree of pollution and thoroughness of wiping the dirt. But it is appropriate to take into account someone else's experience.

Facing in two types of bottles. The first is 120 ml. Its articula - LN1454. Price - 150 rubles. The second is 310 ml. Article - LN1455. Price - 250 rubles.

Classic purifier plastic parts car interior parts. It can be used on elements of the casing, dashboard and other details. There is a high effect of its use. Together with cleaning, protective functions performs, in particular, prevents the plastic cracking under the influence of ultraviolet, has an anti-static and dirt-repellent effect.

It is a foam aerosol. After applying on the surface, a sufficiently dense foam layer is formed. The method of application is standard. The tool must be sprayed into the plastic part, wait a bit and with the help of a rubbing dirt. Please note that the tool is flavored, and in stores you will find this cleaner with various flavors (apple, mint, vanilla, orange, peach).

It is implemented in a balloon of 400 ml. Article - 5571. The price of this period is 80 rubles.

Another name of the means is the Polyrol Plastic Penal. It is a cleaner of the internal and external plastic elements of the car, as well as rubber. It has good thick foam, which is formed on the surface being processed. It has an antistatic effect, protects plastic from drying and exposure to ultraviolet. The ruler has eight flavors that this cleaner can have.

Method of using traditional. After applying the means to the surface, it is necessary to wait a few minutes so that the composition makes it well in the dirt, after which it is possible to remove the entire mixture with a vein or sponge. If necessary, the surface can be polished.

It is implemented in a chamber of 335 ml. Article of goods - KR905. Its price is about 100 rubles.

Conclusion

The auto chemical market currently presents a huge number of plastic purifiers. It also depends on the country's region. However, when choosing this or tool, pay attention not only to the ratio of price and quality, but also the functions that it performs. So, to remove dirt from plastic surfaces you need a cleanerBecause the polyrolol is used to impart the pristine surface of the surface, and is used on a regular basis unlike the cleaner. In the extreme case, you can buy a universal cleaner with a polishing effect, which on the market there is a lot of.

Plastic has many advantages, but he has one essential drawback - fragility. Plastic products can crack, shed, pieces and so on. If there are significant damages, then the thing is easier to throw away and buy a new one than to repair it, but minor damage is perfect forces with your own hands. Restoration of plastic can be carried out by different methods, the choice of which largely depends on the type of plastic itself. Many plastic products can be found marked with plastic makeup and it will help in choosing a recovery technology. Thus, the reactoplasts are glued with a special glue, and thermoplasts are sealed. Also, the method of repair of plastic products depends on the nature of damage - crack, scratch, chip, etc.

When repairing plastic items, the following materials and tools may need: solvents (for example, acetone), grinding paper No. 1000, soldering iron or glue for plastic, clamps, abrasive paste, brushes or syringe, solder, cleaner for plastic, brass mesh, primer and paint For plastic, grinding machine, varnish.

Repair of plastic with glue

Before starting restoration, plastic is treated with grinding paper, removing contamination. It is also necessary to degrease the place of gluing.
On a crack or seam they glue with a tassel or a syringe. If necessary, a piece of plastic for gluing can be strengthened with fiberglass.
Next, we combine the details so that they do not shift and at the same time cluttered tightly to each other. For a better result, you can use clamp.

Plastic Repair Using Soldering

Repair of plastic with epoxy resin

For this method, there will be an epoxy mole and hardener, fiberglass or sherryanka tape (sold in construction stores), acetone, castor oil, file, and grinding paper, tape or tape, plastic dishes and wooden sticks, soil for plastic, polyester sleeve, auto-email.

Preparation of the surface. The plastic product is washed in hot water with a washing powder to remove dirt and fat. Damaged areas are cleaned with small skirt and degreased by a solvent (acetone). If there are chips on the corners and the edges, then from the outside of the product glued the vinyl isolent, creating a barrier for epoxy resin. The tissue tape is not allowed because it can be tightly to the resin and can only be read by sandpaper. The exact shape of the edge of the edge of the product is optional, since in the future the polyester putty and the file will help.
Large fragments of the details are glued with a tape from the outside, and small laid out in the form of a mosaic on the tape, and then applied into place.

Preparation of epoxy resin. A jar with a resin put in warm water for a couple of minutes so that the composition makes it easier to pour out from the bank. A hardener is added to the plastic container in the proportion of 1 part per 10 parts of the resin and stirred with a wooden wand. Then add 1-3 parts of castor oil (acts as a plasticizer). If the resin turned out thick, you can add a few acetone to it. In the ready-to-bonding state, the mixture remains for 2-4 hours, there are so many epoxy as a poet for 2 hours. All these works must be carried out in rubber gloves, since the resin is tightly sticking to the hands. And if for the first time a couple of hours it can still be laundered with acetone, then it is later very difficult to remove it.
The resin is allowed to stand 10-15 to remove air bubbles. Next, begged with gluing on the inside of the product. Small cracks eliminate this way: damaged areas are applied to the resin and rub into cracks. The damage from above is imposed a piece of sickle tape or fiberglass, covered with a resin and also rub it. Usually impose to 2-3 grams of sickle Cross cross.

The average in size and large cracks are also close, but the strokes of the sickle must be 4-6, and the width of the gluing is 5-10 cm. Another layer can be applied on the front side. In places with a large load, fiberglass (not on the front side) is used instead of the sickle ribbon.
Squares on the corners are removed like this: the bleached isolate and plastic are lubricated with epoxy resin and out of the sickle in several layers lay the pay on the damaged place. The gap between the sickle and the tape is completely poured, but this deficiency can be fixed with putty.
A shallow mosaic of fragments is smeared by a resin, striving not to disturb the layout, and rub it into cracks. You can also make a liquid resin, pour it and wait until it is absorbed. Sickle or fiberglass are applied by patch in 3-4 layers, and it is better to do it 16-20 hours after pouring the resin. The bubbles of air and emptiness are not desirable. It dries all this day at a temperature of 18-25 degrees.
Next, the dried products are purified by resin flows, scales are also cleaned with the seams and using a polyester putty align the surface using a spatula. Saving a spacing of hours 12, then you can pass off the product "zero" clock.
At the last stage, the product is ground with a composition for plastic (usually the primer goes in a canister) and paint auto-email or other paint for plastic ..

10.29.2016 6 127 697 views

Surfaces from all sorts of plastics surround us. They are comfortable and practical, but prone strain. Therefore, the question of how to polish plastic from scratches is always relevant. To your favorite smartphone, a windowsill or TV retain an attractive appearance, you need to familiarize yourself with our advice and, with the help of unfinished actions, to turn them into almost the primordial appearance.

Enough look around to see how irreplaceable plastic became in everyday life. It is made of: household appliances, communications, kitchen utensils, car parts, finishing materials.

This material is easy and cheap, easy to use and unpretentious, as well as resistant to temperatures. The only minus is a relatively low density, which is a consequence of misses and scratches on it. Because of this, all the product is completely too expensive.

Preparation

Getting Started, it is necessary first of all to decide that we, in fact, are going to do with what kind of infirred means. Run polishing is easy, it is only important to know how. To begin, it should be understood that the masters for all hands distinguish at least three different types of such actions:

Thermal (with a hair dryer).
Chemical (i.e., affecting plastic toothpaste, polyterol or paste gay).
Mechanical (using a drill or other polishing machine).

Originally evaluate how large damage is, and on the basis of this, we choose the methodology for further work:

Remove scratches from plastic with manual polishing.
Deep downward damage can be overcoming using thermal impact.
The perfect gloss coating acquires after chemical processing, and your headlights will be slaughtered as new.

When the future strategy of actions is defined, it remains to carefully prepare a product for work. Using the most common means for washing dishes or cleaning windows, you should carefully remove the accumulated dirt and fat stains. Surely plastic has a framing made from another material. These places are placed using a painting tape, which will be deleted after the end of work.

Grinding plastic

This method of mechanical processing of the plastic surface is used if there are deep scratches, from which it is impossible to efficiently get rid of any other way. The material is well grinding, having a low melting point. As a result of a leisurely, careful work, we should get a uniform matte surface where there were deep scratches before. Here is the subsequent amplitude of actions:

pre-cleaned material, we have where it will be convenient to engage in it;
preparing the workplace, we remove all unnecessary items;
as a processing material, we take several waterproof skins of various textures;
a special grinding machine is useful as a utility tool;
if there are no cars, it should be borne in mind that a good effect gives grinding using soapy water.

Work is starting using a skirt having a large texture. Grinding is a non-sufficient, carelessness is required. We process the product in slow mode, follow the temperature, it should not overheat. Methodically proceed from the large texture of the skins to smaller. After using each of them, we wipe the processed place with a dry cloth, it allows you to miss the remaining shortcomings.

How to polish plastic from scratches yourself?

There are several ways using which, eliminating scratches and scuffs will cease to be an impracticable dream. At home, with the help of non-hard tools, you can make your own threaded product perfect.

If the plastic surface that your kitchen table has, ceased to sparkle and covered with scratches, then it will not be difficult to polish it until the initial shine.

The same method will allow making window slightly as the same textured as it was a few years ago. A few hours of targeted work will save you significant money.

Manual polishing

After getting rid of scratches, it's time to move to the next time-consuming process - to a polishing making an old item of almost new. Services involving scratches are widely provided by car and cellular salons, as well as specialized cleaning companies.

They are not suiced, the same job is easy to make them hands. After all, special means and devices that are used by professionals are sold in all auto shops. The main thing when choosing polishing paste: do not forget that we will process plastic; In order not to miss in choosing, you should consult with the seller who will give a professional advice.

By the way, it has proven to say well with the chosen method of processing the gay paste. She must be familiar to those who served in the army and drape belt blossom. This means can be perfectly polished with objects that do not claim for pristine transparency.

If we are talking about a TV on which scratches appeared or about a telephone, which has a solid loss, then it is better to use special pastes. Let them cost more, but the effect will be desired.

Manual polishing:

the fine details and small surfaces will be optimally processed;
the paste take homogeneous, impurities and grains are excluded;
special gloss will give oil;
apply a paste to the surface with felt or felt
we use circular movements;
the hand goes easily, push small;
the whole process takes from 15 to 20 minutes.

We use a polishing machine, which in the most budget version consists of a drill with a special nozzle:

inexpensive polishing nozzle is sold in the store;
the best use of such a machine is the headlight surface;
good savings gives replacing nozzles on a piece of ordinary felt.

This material requires a thorough consolidation so as not to score.

Polyrol processing

Among the funds purchased in a specialized store, do not forget about the polyrolol. With its help, the outcome of your work will be a glossy plastic, which is no different from the one we purchased in the store. Technology work as follows:

The means is applied to the surface in the form of a small uniform layer.
It is necessary to thoroughly rub it with a special cloth or a nozzle.
Then begins, actually, the process of work that the required result is achieved, plastic to the mirror brilliance will bring G polyrolol.
If the surface of the phone is polished, then the periodic exposure to moisture, transparent plastic over time loses the result achieved, and the process should be repeated.
Repetition is necessary in any case, if you saw that your plastic is black and shabby again.

Conclusion: To avoid frequent updates, take care of moisture item.

Using a polishing machine

This is a completely professional tool that allows you to bring the restoration of the product to the perfect process. Such a tool is distinguished by the usefulness and convenience. It is especially recommended for motorists, who from time to time bring to perfection of the headlights of their car, as well as its plastic surfaces. The main convenience consists in speed, in a few minutes the volume of work is done to which manually leaves, perhaps not one hour.

The consideration that guides a person who acquires such a technique is the need to restore order in its household from time to time. It is worth such a polishing masterpiece is not so expensive, it is available in stores selling power tools.

Several nuances that should be observed in the instrument process:

before putting special to work, it is necessary to remove the residues of the dirt with a wet nozzle;
when the action is nearing the end, one of the special pastes purchased in the store is used;
a special nozzle from the foam rubber will help to guide a special gloss on the product.

The whole method takes a few minutes.

Video: How to polish plastic from scratching polishing machine?

Fen

Another rather original method of getting rid of scratches is to use the most ordinary hair dryer. The meaning of the method is simple: plastic vividly reacts to sharp temperature differences, so heat treatment is the best way to "heal wounds" on the surface of your phone.

Two types of tools are used for work: normal hairdryer, used for drying hair, and a special construction unit.

Pollution is removed before working with plastic.
The process is best started with minimal power.
We guide a stream of hot air to the required area.
If scratches continue to remain, power must be gradually increased, but without fanaticism.
The main expected result is that the plot with scratches acquired a matte base, and they themselves disappeared.
After cooling, the polishing of plastic begins.

Toothpaste

In some cases, there is no need to acquire expensive products. As practice shows, abrasive for polishing the same headlights can serve such remedies as an ordinary toothpaste. Despite the lowest possible availability, the shine of the surface, as a result, it turns out no worse than using a proprietary tool from a specialized store.

Principle of operation with this means:

with the help of detergents get rid of pollution;
the composition must be neutral;
after degreasing, the product is washed and dried;
pasta is applied to a piece of flannel;
movement circular, clockwise or against it;
periodically, it is necessary to wash off the resulting Cashitz;
the remaining paste is best to remove with a wet sponge.

Obviously, using simple ways and budget arsenal of funds, you can save considerable money and get a truly brilliant result.

4.3 / 5 ( 9 votes)

A TYPE:multipurpose tool for cleaning and protecting plastic salon with neutralization of unpleasant odors and flavoring effect.

MANUFACTURER:Misal Arexons S.P.A., Italy.

Scope of use:dashboard, internal elements of plastic finishes; All types of plastics, vinyl, rubber, dense varieties of wood inside and outside the car; Tire surface; external plastic decoration elements, such as spoilers, decorative strips; bumper.

Purpose:designed for cosmetic daily and capital monthly care, deep and surface cleaning, protection against ultraviolet rays and ozone.

Certification:hygienic certificate No. 77.01.30.238.p.13764.06.3 (serial release), certificate of compliance.

PACKAGING:plastic vial of ergonomic shape with a sprayer of a trigger type, volume - 500 ml; Aerosol packaging, volume - 400 ml.

Consumer analysis

Features:the tool quickly removes dirt and dust even from textured recesses and micropores available on the surface. It is best suited for the dashboard, giving the surface the required shade: glossy or matte. The matte shade of the dashboard is ideal for modern design cars, in which windshields are located under the high inclination. Matte tint of the dashboard significantly reduces sun glare and facilitates the eye tension in sunny weather.

The remedy introduces natural fresh citrus flavor, vanilla, ocean. However, for those who wish there is a product and odorless. The product includes up to 5% of non-ionic surfactants; The formula dissolves and neutralizes the dirt, leaving the protective film on the treated surface. The use of the means gives the surface an antistatic property.

The tool does not cause allergies and safe for the skin of the hands.

MODE OF APPLICATION:before use, shake the bottle. Apply to clean soft cloth or sponge. Processing the surface is carried out with a cloth impregnated with the composition, and work on the plots. To achieve the best results, the tool must be applied regularly.

SUMMARY:the tool clears plastic parts without leaving fat traces. With regular use, the plastic does not change its original color, that is, "not aging." The tool has a pleasant fragrance, it is economically and easy to use; Trigger bottle is comfortable to hold in hand.

But remember that the appearance of the car is not the most important thing. More importantly, it is technically working. We recommend buying high-quality spare parts for foreign cars here.

Similar articles: