Where they make cars KIA for Russia and other countries. Where they collect kia plants in Russia where they collect kia soul
And we renew a series of articles on the production of cars. This time we will consider Kia Motors.
Korean company Kia Motors, known for its cars, takes some of the first places in all ratings by the number of cars sold. Such popularity is due to a very attractive price / quality ratio of models manufactured by the company. Also important to popularize the brand played a joint policy of the company and the Russian state to transfer shops of the final assembly of cars closer to the consumer. Today there is a major production center where Kia cars are collected in Russia. In addition, the Russian market receives models collected by the plants of South Asia, Slovakia.
Transfer of car production to the domestic market became beneficial to automotive companies due to the increase in customs duties and the introduction of economic preferences by the Government of the Russian Federation
Where they collect kia rio
Kia Rio is the most popular company model. In Kaliningrad, there is a large plant "Avtotor", where Kia Rio is collected for the Russian market.
For some time, the customers were available to the models collected by the Ukrainian Automobile Plant LUAZ. However, today you can acquire exclusively cars of the Kaliningrad assembly.
For other markets, Kia Rio is assembled by the capacities of Thailand, PRC, South Korea, some other countries. At the same time, the car for different regions is characterized by both the exterior and the "filling".
Where they collect kia sportage
Kia Sportage is a popular model, which is a compact SUV from the South Korean company. Today, the car seized is carried out by the Avtotor Plant (Kaliningrad). This stage implies an assembly of about 30 parts of the machine. Slovak Plant, where Kia Sportage collect, supplies cars to other countries.
Previously, the Russian consumer also sold cars of this model produced by the German plant of the company.
Where they collect kia ceed
The popular C-class car occupies among the model range of KIA intermediate space between Rio and Optima. The car, like her relatives, for the Russian market is going to the Kaliningrad plant.
There is also Kazakhstan production, where Kia Ceed is produced for some CIS countries. The Russian consumer can meet cars issued by the Company's main representative office (South Korea). This is especially true for the first generation of the machine.
Where they collect kia sorento
One of the most famous company cars that occupies a significant amount of the middle-size crossover market, competing with cars such as Chevrolet Optima, Mitsubishi Outlander, as well as Hyundai Santa Fe, having the same base.
Plant where Kia Sorento is collected is in Kaliningrad (autotor). Previously, the SUV also was carried out by the power of the IL car.
For European countries, the car is collected by the Kia Motors Slovakia plant. Also common models collected by Turkish production facilities.
Where they collect kia ithtima
Kia Optima is a middle class sedan, which is known in many countries of the world under various names. It has a common base with its main competitor - Hyundai Sonata.
In the Russian market, the model is implemented since 2012. Sole factory , where Kia Optima is going - it's all the same "Avtotor". The assembly of the car began there in the fall of 2012.
Where they collect kia soul
The car is a rather rare mini-SUV segment, characterized as a mini-truck. Inside the model range of Kia Soul is located between Kia LED and Sports.
The model sent to the CIS countries is manufactured by the Kazakhstan plant. For the South Asian market, it is made by the company's main facilities (South Korea). The plant, where the Kia Soul is produced for the Russian market is located in Kaliningrad.
Where they collect kia cerato
Kia Cerato is also one of the most-selling concern cars. Until recently, the car was going to the South Korean plant, including for the Russian market. However, today is a factory where Kia Cerato is produced is all the same "Avtotor", located in Kaliningrad.
Where they collect kia picanto
Kia Picanto is a city small car. Popted because of its small size and high functionality. One of the few popular cars brand, which is not produced by Russian plants.
Regions where Kia Picanto is collected are South Korea and Kazakhstan. On the Russian market predominantly South Korean models are presented. Machines produced in Kazakhstan are sent to the markets of the CIS countries.
According to experts in the next few years, the production of the car will also be moved to the power of the Kaliningrad plant "Avtotor".
Where they collect kia venga
Kia Hong - a subcompact car, which until 2016 was going to Slovak Kia Motors Slovakia. Now the plant, where Kia Venga is produced to the domestic market - this is "Avtotor".
A model designed to South Asian consumers is produced by the South Korean division. Since 2015, Kia Venga has been removed from production in Russia.
Conclusion
KIA cars today are mostly produced by domestic facilities. Avtotor produces such popular models of the company as Rio, Sportage, Ceed, Cerato. The line of the car produced by the Kaliningrad plant will expand as the market needs. Korean brand cars have proven themselves as reliable, inexpensive models. The domestic consumer prefers the most preference to budget representatives of the KIA line, but did not go without attention and the main competitor of the successful model Rio - Höndai Solaris. He also remains one of the best-selling machines in Russia.
The "Avtotor" plant in Kaliningrad has been collecting cars of the Kia brand for more than 20 years. The first model KIA has gone from the Kaliningrad conveyor back in 1997. This model was Kia Clarus:
To date, 11 KIA models are produced at the Kaliningrad Plant:
- Kia Sorento.
- Kia Sorento Prime.
- Kia Soul.
- Kia Picanto.
- Kia Optima.
- Kia Sportage.
- Kia Cee'd.
- Kia Cerato.
- Kia Mohave.
- Kia Quoris.
- Kia Stinger
Kia Stinger's manufacturing plant "Avtotor" has begun in January 2018. Kia Stinger is assembled by the SKD method (large-sized machine collectors), which are supplied by Kia Motors plants in Slovakia and South Korea:
The Avtotor plant in Kaliningrad is one of the largest and large-scale enterprises in the Russian Federation, which specializes in the automotive industry. From the company's conveyor comes with each ninth car in the state. The assembly and production of the car brand is produced since 1996, it was then that a contract was signed with the company KIA Group.
Forming metal sheets are first received at the factory, of which separate details of future machines are welded. In the assembly process you need to connect more than 3000 welded points. The product is then sent to the welding conductor, where the body is formed. After that, on the dovarch region, additional points are combined. Then the geometric body parameters on special equipment are measured. For this, random car is taken and 300 points are tested according to the coordinates x, y, z. After that, make the color of the machine, the sealant is applied, they are polished, and then control testing.
In Russia, accepting applications for the purchase of Kia Stinger was held in December 2017, for buyers to deliver products began already in March 2018. Stinger is the first Fastbahk Gran Tourismo in the history of the Korean manufacturer. The car was created in the Kia Design Center in Europe based on GT-Concept. According to the control of public relations and media control, the car is implemented in the Russian Federation in 3 variations of execution with 2 types of motor: 2.0 T-GDI and 3.3 T-GDI.
The updated version is sold at a price of 1 million 999 thousand 900 rubles. For this amount, a standard modification with rear-wheel drive Stinger 2.0 T-GDI and a self-locking character differential is being implemented.
Kaliningrad specialists set up the power of the motor under the specifics of the state system of taxation taxes, which is equal to 248 horsepower, and the greatest moment of twist is 353 nm. These characteristics guarantee the Fastbekka 5-door design overclocking up to 100 kilometers per hour for only 6 seconds. There is also an all-wheel drive vehicle modification for 2.0 T-GDI.
The Kaliningrad enterprise produces the release and most powerful version of the GT 4WD stinger machine for implementation in the Russian Federation. It is equipped with a 3.3-liter V6 Lambda engine with fuel fluid injection function and double pipelines. The power of the car is 370 horsepower, and the greatest moment of twist is 510 nm. At the same time, overclocking up to a hundred kilometers per hour the fastest of all existing brands of Korean production cars - 4.9 seconds.
It should be noted that all modifications of the car Kia Stinger are equipped with an automatic transmission of personal development in 8 steps.
Machineomplekt consists of the main nodes of the car: the body, engine, transmission. All delivered machines are input control. Then the parts are unpackled and stacked on the carts in accordance with the order of the assembly.
The body after passing the input control falls into the zone of inner logistics, where they are carefully wash. After that, protective covers wear on them not to damage when installing the rest of the equipment. In this form, the body hits the conveyor, on each site of which new details are mounted on it. At a certain stage of the body, the previously collected chassis with the engine and transmission is already waiting. Then the wheels are installed on an almost assembled car, it is refueling with fuel and other liquids, after which its move towards the first handling tests is moving.
RUSSIAN KIA dealers have already begun applications for Kia Stinger. It starts from 1,899,900 rubles.
As you know, three demands made in the title requirement almost never intersect. However, designers and designers of the new Kia Cerato tried to fame, and if you are not looking for an aggressive car in a sporty style, then you will probably appreciate the new creation of hardworking Koreans. And although the design of the radiator lattice causes rather controversial feelings, it is worth recognizing that the car will stand out from the total mass, including thanks to it.
Where are Kia Cerato 2013 collect?
This car is the third embodiment of the Cerato model. Collect Kia Cerato 2013 in Korea, but in the near future, perhaps these cars will collect in Kaliningrad, there allows the plant. And, looked around the first version, seen the light in 2004, the improvement is visible to the naked eye.
The name of the "Great Designer" story did not save, but the first version of Cerato (with Ital. Brilliant, so!) It was possible without any special remorse of conscience to confuse with any other Chinese car, otherwise to take for a new miscarriage to Togliatti. The hatchback was slightly pretty on the species than the sedan, but he definitely lost against the background of Western brands.
The second reincarnation of a brilliant sedan was shown in Sydney, and this time the car was no longer so faceless. Kia hired to develop two designers at once - Peter Schraira and Tom Kurns and they did not let down. The KIA Cerato of the 2nd generation is especially beautifully beautiful in the coupe version - it is so good that analogies arise with the Mitsubishi 2000s in general and the Lancer family in particular.
For the first time, the third generation was shown by Los Angeles at the end of 2012 and, as already mentioned, it causes slightly controversial. Designers remained the same, but the style has changed seriously. Kia is not in vain Move Cerato from the discharge of "universal" in the family cars - Mitsubishi here and does not smell. But it appeared his own recognizable style. We will talk about it in more detail, then there will be an overview of Kia Cerato 2013.
Overview Exterior and Interior Kia Cerato YD (2013)
Start standing with the fact that New Kia Cerato 2013 is not quite a sedan. Due to the fact that the designers and designers were played for too long with the models, to say exactly which of two new Cerato options - a sedan, and what a coupe, you can only dealer. Both cars have similar silhouettes, only the coupe looks slightly more aggressive (and the lattice of the radiator is different).
Kia Cerato 2013 (photo above) is somewhat longer and wider than the predecessor, but the weight decreased by 62 kg due to the redistribution and change of materials. The trunk of the car has a volume of 482 liters. A new Cerato is most likely to C-Class and, it is worth recognizing that the car is quite true.
The price of Kia Cerato 2013 amounted to 930 thousand rubles, which is not bad for C-class. And if we talk according to the basic configuration, the price of Kia Cerato 2013 in the most basic version, with a motor 1.6 will be 669,000 rubles, this figure is much less than, although of course, these machines can not be compared :)
And this is the photo of the Caia Cerato Salon 2013, it can be seen that the salon looks quite beautiful:
Inside Kia Cerato 2013 is quite spacious, as the car is built on a new platform. The car has a on-board computer, as well as a powerful multimedia system with the support of almost all relevant formats.
The comfortability of the car - chairs in the new KIA with leather upholstery and ventilation was also improved, and a full-fledged climate system works in the cabin. All sensors are located on the dashboard behind the wheel, however, due to the large diameter of the steering wheel, they are completely distinguishable and during the active passage of complex parts of the route.
Review "Stuffing" Kia Cerato 2013
This is where the new "Korean" was ordered, so it is in power. The technical characteristics of Kia Cerato 2013 really talk about low engine power. Cerato offers two engines - both gasoline, 1.6 and 2.0 liters and a capacity of 130 and 169 hp respectively. In the streeting with her it is better to even not even join - it will be very shameful.
The brilliant sedan can be equipped with both a manual gearbox and automatic transmission, both six-speed. It makes sense to put the mechanics in principle a little - to fract and "gamble" on Cerato is problematic, and the automatic transmission with its functions is coping with a bang.
The car was tested on the "ideal track" in Dubai (it was there that the test drive Kia Cerato 2013 was passed there), but how he behaves on Russian roads, it will be possible to look at it later, in the video review Kia Cerato 2013. Reviews of thematic forums disagree Opinions, but most still considers the car suitable for the middle and southern strip. But Northerners should think about buying something more frost-resistant.
Who is perfectly suitable Kia Cerato 2013?
Cerato is a completely good family chamber that takes not a lot of space, eats only 7 liters of gasoline by 100 kilometers and stands out against the background of other Chinese and Korean cars except that appearance. The option with a manual transmission is suitable for the enthusiasts of this system, but the version with automatic transmission and the engine with a volume of two liters showed itself from a good side in urban conditions.
And this is a photo of Kia Cerato 2013 coupe, it looks even more compact and agile:
The on-board computer of the novelty does not shine with functions, but compared to what offers native auto industry, it is already progress. Of course, the price of the new Kia Cerato 2013 is not quite Korean, but the quality of the manufacture of all the nodes has grown significantly since 2004. The price of Kia Cerato 2013 coupe is approximately the same as on the sedan model, and is within 950000 rubles.
Who must be worth buying Kia Cerato 2013: fathers or mothers of the family, as well as calm and experienced drivers at the age.
Who should look at: young drivers who do not want to ride on a sports car. And also lovers to do tuning. After all, Kia Cerato 2013 is such a car that can be excellent tuning under its preferences. Tuning Kia Cerato 2013 is best done in the tuning studio, and if you allow knowledge and experience, it is possible and independently, whenking and installing various accessories for Kia Cerato 2013.
One of the main features of the company Kia is that cars are assembled on branches of those countries in the market of which they will later be implemented.
Photo: Kia plant in the USA
It should be noted that the appearance and technical characteristics of one model can directly depend on the branch, on the capacities of which the car is produced.
The most powerful enterprise in Russia, where KIA products are made, the Kaliningrad Auto plant is.
Car Kia Rio is considered one of the world's best-selling, in particular in Russia. Motorists first note high quality assembly, pretty design and low cost.
As mentioned above, Rio is collected for Russia at the Kaliningrad plant.
Among Rio producers were Ukraine, where Kia Rio was collected at Luaz factory. Do not forget about branches in Thailand, India, China, Ecuador and South Korea.
Kia Sid.
A golf class car that has been among the last few years among sales leaders.
For the Russian market, LEDs are collected in the Kaliningrad "Avtotor", and for the CIS markets in the enterprise in Kazakhstan.
The most powerful plant is the South Korean enterprise whose products can be found in all points of the world.
Build Kia car in Mexico Kia Karnival
Kia Carnival is one of the most "ancient" cars of the Korean Concern, the assembly of which is carried out since 1998. Since then, the car survived three modifications, each of which was done at the factory in South Korea.
Also, until 2014, the car was produced in the UK and the United States, but there he was called Kia Sedon.
Kia Cerato
At the moment, Cerato is listed on the list of sales leaders in Russia. Until 2013, the car was done in South Korea and Kazakhstan.
It is worth noting that the new modification of the model is collected in the Russian enterprise.
In 2006, when the second generation of Cerato was presented, Korean began to collect in the United States.
Kia Cruir
CRUSRUS is one of the few Korean cars, which was going exclusively in native enterprises. In fairness it is worth noting that the assembly took place on the Kaliningrad "Avtotor".
Kia Mohawa
Even at the initial stage of development, representatives of the Company argued that the Kia Mojave SUV will only be delivered in the United States. But later, it was decided to export the model and to the Russian market.
To date, Mojave is assembled at the Kaliningrad "Avtotor", as well as in Kazakhstan and South Korea.
It is worth noting that in the USA an SUV is referred to as Kia Burorego.
Photo: Kia assembly in Korea Kia Opirus and Kia Kvoris
It's no secret that Kia Quoris is the most expensive car company. His predecessor was a sedan Kia Opirus, the production of which was completed in 2010, and was held exclusively in South Korean enterprises.
Kia Kvoris is going to Kaliningrad and to date.
Kia Optima
Another popular model of the domestic motorists model Kia Optima appeared on the Russian market in 2012, and it was then that its mass production on Avtotor began.
Kia Sorento
The new generation of the medium-sized SUV SUV cannot boast the same popularity as previous, but their fans are available.
To date, Sorento is produced in the Kaliningrad company. Some time, the assembly was carried out at Izh-Auto.
It is worth noting that Soutvotors of Sorento for the European market make on the capacities of Turkey and Slovakia.
Kia Soul
The Russian version of Kia Soul boasts a unique design. Due to this, the domestic assembly car is significantly different from foreign fellow.
No one will not surprise that the car is produced on Avtotor.
In addition, to a greater extent for local markets, the model is collected in Kazakhstan, China and South Korea.
Video: Kia car assembly process
Kia Sportyj.
Kia Kia crossover gained high popularity due to its design, and fantastic running qualities. The first generation of the car was collected at German enterprises. Subsequent modifications are produced in Russia and Slovakia.
Kia Venge
Until recently, Kia Hong, was the only model of Kia, which was not going to in Russia. But, in 2015, the situation was corrected, because the enterprise "Avtotor" has committed itself, to fill the domestic market every year with high-quality cars.
Output
Cars companies KIA are among the most popular, both in the world and in the domestic market.
The range of models is really impressive, and it seems that the Korean Concern has put a challenge to insert a minimum one to one representative in every class of cars.
For the domestic market, the model of KIA is collected mainly at the Kaliningrad plant "Avtotor". However, for some time, the assembly was carried out at the Izh-Auto enterprise.
