How to change the fuel filter on the Volkswagen Polo sedan. How to change the fuel filter with your own hands on the VW Polo sedan after how much change the fuel filter polo sedan

03.07.2020

Replacement fuel filter Polo Sedan The point is not difficult.

To begin with, we reduce the pressure in fuel system, To do this, take out the fuse fuel pump, from the fuse block, after removing the terminal from the battery.

On the new fuel filter there is a shooter showing the direction of gasoline flow, from the tank to the engine.

Fuel filter for polo sedan you can order in the online store http://sbl-auto.ru. "Auto parts." - the widest range of body parts and optics, more than 25,000 items. "Auto parts." Sell only certified and legitimate origin of auto parts. Cheap prices and availability of discounts and shares, you will be pleasantly surprised. The online store gives a guarantee for the purchased product and exchanges goods inappropriate quality.

We chase the car on watching pitTo replace the filter, we will need a cross screwdriver and a pair of hands. The filter is on the bottom of the car, to the right of the gas tank.

In order to remove the fuel filter, it is necessary to remove 3 fittings. First we consider dirt from the fittings. Hoses are removed by pressing the button on the hose mount, i.e. Press the button and drag the hose from the filter.

Now we will use the cross screwdriver. Be careful, gasoline leakage is possible, it is better to dress worse. Now unscrew the cross screwdriver bolt that keeps the filter

and remove the filter itself.

Now remove the plugs from the new fuel filter and insert it into place, we dress the hoses (before clicking) and tighten the screws. Just in case, it should be checked if the filter does not flow, we start the car and we look at the bottom of the leakage at the junction of the filter with hoses. All replacing fuel filter polo sedan is produced.

The substitute for the polo sedan fuel filter is carried out when a run of 60 thousand kilometers or 4th year of operation of the car is reached. Read the article "". When to go to maintenance?

Video guide to replace the fuel filter

Original fuel filter polo sedan It has articula VAG 6Q0201051J.. The average price of spare parts - 1200 rubles. It is installed separately from the fuel module, which is located in the tank. As experience shows, drivers are often confused, and instead of the above filter, the original is installed with the number VAG 1K0201051K.which is not intended for polo sedan. Externally, both parts are almost identical. Differences only in pressure regulator. This indicator in the original 6Q0201051J. Makes up 4 bars. When installing not intended for car filter VAG 1K0201051K. (With a valve pressure of a regulator in 6.4 bar) there is a good hearing hum of fuel pump.

Features of the fuel filter for polo sedan with engine 1.6

Fuel filter plant VAG 6Q0201051J. By default, installed on all modifications Polo Sedan. With a 1.6 liter engine. Regardless of the year of release. Manufactured in China, UFI. It has a all-metal design in the form of a cylinder with 2 inlet and one outlet tube. The filter element is made of special tight paper. This spare part can also be bought directly from UFI. On the manufacturer's catalog it has a number 3183300 , Cost - 780 rubles.

Also on sale you can meet the original fuel filter under the article VAG 6Q0201051C. at a price of 2000 rubles. Differs from VAG 6Q0201051J. Just what is made by Sofima (China), and is used as the original item mainly in the inner Chinese market. Otherwise, there are no differences between two original details.

Fuel purification filter on the sedan is located under the bottom of the car, near the rear right wheel. To access it you need to use the observation pit.

Sizes of the original Fuel filter VAG 6Q0201051J

The planting place for the fuel filter has quite large sizes, and the fastening clamp has a special tightening bolt under different sizes. Therefore, a filter can be installed here, a little different in size from the original.

Analogs of fuel purification filter for Polo Sedan

For polo, the sedan also has a rich selection of analogs of the fuel filter. The main criterion for selecting substitutes is the pressure regulator indicator, which should be 4 bars. The most popular models:

WK 69/2. From Mann-Filter (Germany). Price - 900 rubles. Size completely coincides with the original. A feature of this model is a better filtering element than the original part;

GB-3229. from Big Filter (Russia). Price - 520 rubles. Leader in category price / quality. Drivers who used it - only positive. Inferior to the original part only slightly in the quality of the filter element, has a smaller filter paper density;

PP8364. from Filtron (Poland). Price - 860 rubles. Similar to the quality of the fuel filter from the MANN-Filter. More in diameter by 7 mm, but installed without problems.

MANN-FILTER WK 69/2

Big Filter GB-3229

Filter mesh (coarse fuel purification) is located in the tank. It is installed in the fuel module, and is attached to the fuel pump. According to the instructions, this spare part does not change separately, so there is no number in the catalogs, and not sold separately, only assembled with the fuel pump. But since the degree of pollution affects the work of the fuel pump, you can buy the closest analog A2C53097154. production Siemens. Price - 240 rubles. This filter grid goes as a regular for GAZ-3302 Euro-3. Most drivers are preferred when replacing the main fuel filter, it is simply washed with a mesh with a liquid for cleaning carburetors or acetone.

When to replace the fuel filter on the polo sedan

According to the official instruction and change the fuel filter every 60 thousand km of mileage. As a rule, along with the main fuel cleaning filter, the drivers also recommend changing and filter grid (or at least clean it). The cost of this operation official dealer hesitates in the area of \u200b\u200b500 rubles. You can easily do without any problems.

Engine - car heart. So that he did not give failures and worked smoothly and regularly fuel should be perfect in it. Fuel purification filter requires regular prevention and timely replacement in case of severe pollution. It is he who protects the motor from foreign particles from entering it, dust pollution and various impurities from poor-quality fuel.

Recommended by the manufacturer, the replacement of the filtering fuel of the element does not coincide with the actual necessary. Manual prescribes to carry out this work no more than 60 thousand km run, but the quality of fuel and the conditions for its transportation are forced by car owners to do it 3 times more often - after 20 thousand km of mileage on domestic roads.

Signs of fuel filter contamination:

reduction of power;
increase fuel consumption;
difficulties when starting the engine.

Instructions for replacing the fuel filter on Volkswagen Polo Sedan and photo report, video

Suitable filter models:

Vag.	6Q0201051J.
Mahle.	KL 756.
	1K0201051K.

To replace the fuel filter in Volkswagen Polo. Sedan Machine should be driven into the overpass or put on the observation pit. Special tools and skills will not need, but execution step by step instructions Save even more of your time.

Before starting the process in the fuel system, you need to reset the pressure.

Fuel filter in Auto Volkswagen Polo Sedan is located on the right of the gas tank.

Remove the fittings by pressing the flat screwdriver to the locking buttons.

Removing and supplying tubes also remove.
From the attachment gently take the cable manual brakes.
With the help of a crush screwdriver, remove all the fasteners holding the filter element.

We take out the replaceable fuel filter and drain the fuel left in it in the prepared container.
IN new filter We pour about 100 ml of new fuel.
We establish a clean filter element to the holder and carry out the assembly in the reverse order.

After completing the assembly, do not forget to connect fuel fuse. Motor launch and check compounds for tightness. If there are approach - tighten tighten the tubes and the fitting.

When working with combustible materials, you do not neglect the safety rules - do not smoke, do not burn the used paper or the rag, do not conduct repair work Near open fire.

Also watch the video on this topic:

As you know, the operation of the fuel system determines the efficiency of work car Engine, as well as dynamic and high-speed properties of the machine as a whole. And a gradual decrease in important technical characteristics Auto affects not only the quality of driving, but also on the occurrence of breakdowns. In this article, we will tell you how often it should be made on the Volkswagen Polo sedan and how it is done.

The German manufacturer does not give clear instructions on the fuel filter replacement interval. In particular, Volkswagen argues that the life of this component is equal to the deadlines for the use of the entire car. However, domestic drivers have proven that in practice everything is different. The performance of this part, primarily affects the quality of gasoline refueling and various dirt falling into the fuel system through it despite all precautions taken by the concern engineers.

As practice shows, it is best to replace the gasoline filter every 20-30 thousand km of mileage. Remember, such numbers are not provided by the manufacturer, but by domestic motorists, so replacing the fuel purification element can be carried out earlier in case of clogging. If, during the movement, the engine starts to trim or periodically stuff, then in all likelihood, the use of the filter in your car came to an end.

New Filter KL 756 for VW Polo Sedan

In the early stages of clogging, the fault component may be invisible for not experienced driverBut a valid motorist will be able to detect a breakdown on time. As for signs of breakdowns of the element in the Volkswagen car, they are the following:

As mentioned above, first of all - this is uneven operation of the motor.
Also owners of polo sedan models celebrate the drop "traction" (power) car.
Another feature is an enlarged gasoline consumption as a result of the component clogging, if compared with standard indicators specifically for your machine model.
If you can't get started, and before this your car Troilo and Chiheli, then, in all likelihood, the fuel filter has achieved an extreme level of pollution.

[Hide]

Tools

So, if gasoline filter Your car has failed and you decide to replace it, you will need the following:

screwdriver flat;
crushing cruciform;
rag;
small fuel tank in the filter.

Naturally, you will need a new fuel purification element. So that this component worked stably and practical, you need to buy the original model from manufacturer Volkswagen.. When all this is prepared, you can proceed to a direct replacement.

Flat and crucible screwdriver

Instruction

In polo models, the sedan you need the element is located on the right side of the tank with gasoline. In filters on Volkswagen, a gasoline pressure regulator is installed, so when replacing you need to buy a similar component. Also have to find a pit or an overpass.

When the car is on the pit, you need to lose gasoline pressure in the fuel system. To do this, remove the cover of the fuse block, which is located in the cabin at the wheel.
Fuse block on Volkswagen Polo
After pre-fueling the car dismantle the fuse of the gasoline pump (BS 32 marking).
Next, we run the motor and not gas to turn on the neutral gear while the car does not stall.
Now turn on the starter (not a stocking car) for a few seconds so that the pressure in the system is reset.
We take a flat screwdriver and press on the locking of the gasoline plum hose from the replaceable element.
Turning off the tube from the fuel filter fitting
Disconnect the tube from the fuel component fitting.
The same makes the apparent and discharge hoses from the fittings.
Then carefully remove the hand brake cable from the attachment.
We take a crusade and unscrew the tightening of the clamps and fastening the changing part.
Weakening the tightening of the fuel filter clamp
Next, dismantle your filter from fasteners.
Take a pre-prepared container and drain about 100 grams of fuel from it.
Then we get a new filter and pour some gasoline into it (preferably a new fuel, and not what remained in the old one).
We put the filter to the holder and collect everything in the reverse order.

Do not forget that after all this you need to put the fuel pump fuse, otherwise you will not be able to start your car.

Working with the components of the fuel system, do not forget about fire engineering. During operation in the garage, it is impossible to smoke or approach your car with open fire. Also, the filter is not recommended to be changed in rooms where there are devices running on natural gas.

In the event that your polo sedan is operated in the conditions of high dusting or you pour into it not very quality gasolineThe replacement of the fuel filter is preferably produced more often than every 30 thousand km of run.

Video "Replacing the fuel filter in Volkswagen Polo Sedan"

The video shows how to replace the fuel filter in the car Volkswagen Polo sedan.

In the VW Polo fuel filter, the fuel pressure regulator is built in, so you need to install a filter of only a similar design.

Work performed on the viewing ditch or overpass.

Fuel in the system is under pressure. Therefore, before servicing the power system, it is necessary to reset the fuel pressure.

To do this, pulling, remove the lid mounting block in the cabin.

When the ignition is turned off, we remove the fuse BS32 fuel pump.

Let the engine and let him work on idling Prior to stopping due to fuel generation. Then turn on the starter to 2-3 s. After that, the pressure in the power system will be reset.

Fuel filter installed on the right side fuel tank.

Pressing a screwdriver to the fixator of the fuel plum tube from the fuel filter, disconnect the tube from the fuel filter fitting.

Similarly, disconnect the supply and discharge tube from the fuel filter fittings.

Take the cable parking brake From the holder.

Conducting screwdriver weakening the tightening of the fuel filter clamp.

We take out the fuel filter from the clamp, with the pinch of the filter from the holder on the cottage.

Since fuel remains in the filter, we drag it into a pre-prepared container.

Install the filter in the reverse sequence.

In this case, the arrow on the filter housing should be directed towards the movement of the fuel (to the front of the car).

The appearance of the fuel filter with the fuel feed direction indicators applied to it.

The tips of the fuel tubes put on the filter fittings before snapping the clamps.

The tip of the tube with a blue retainer (fuel plum tube from the fuel filter) we put on the middle fuel filter fitting.

The pin insert into the holder on the cottage. By installing the fuse of the fuel pump, we turn on the ignition and check the tightness of the compounds.

[How to reduce maintenance costs Volkswagen Polo Sedan] [ Maintenance Volkswagen Polo Sedan for 15 thousand miles of mileage] [Maintenance of Volkswagen Polo Sedan for 30 thousand km mileage] [Tool necessary for technical volkswagen maintenance Polo Sedan] [Independent Conduct - General Recommendations] [Safety Instructions for Independent Car Maintenance]

Replacing Fuel Filter Volkswagen Polo Sedan

Have you already seen our most popular new video? They are here. And here - our most popular new photo galleries.

Subscribe to autonews on our channel in Yandex Zen

Error in the text? Highlight it with the mouse! And click: Ctrl + Enter

www.zr.ru.

Replacing the fuel filter on Volkswagen Polo

As you know, the serviceability of the fuel system determines the efficiency of the automotive engine, as well as the dynamic and high-speed properties of the machine as a whole. And the gradual decrease in the important technical characteristics of the car affects not only on the quality of driving, but also on the occurrence of breakdowns. In this article, we will tell about how often the fuel filter is replaced on the Volkswagen Polo sedan and how it is done.

New Filter KL 756 for VW Polo Sedan

In the early stages of clogging, the fault component can be invisible for an inexperienced driver, but the experienced motorist will be able to detect a breakdown on time. As for signs of breakdowns of the element in the Volkswagen car, they are the following:

As mentioned above, first of all - this is uneven operation of the motor.
Also owners of polo sedan models note the drop "traction" (power) car.
Another feature is an enlarged gasoline consumption as a result of the component clogging, if compared with standard indicators specifically for your machine model.
If you can't get started, and in front of it your car Troilo and Chiheli, then, in all likelihood, the fuel filter has reached the extreme level of pollution.

Tools

So, if your car's gasoline filter has failed and you decide to replace it, then you will need the following:

screwdriver flat;
crushing cruciform;
rag;
small fuel tank in the filter.

Naturally, you will need a new fuel purification element. In order for this component to work stably and practical, you need to buy the original model from the Volkswagen manufacturer. When all this is prepared, you can proceed to a direct replacement.

Flat and crucible screwdriver

Instruction

Do not forget that after all this you need to put the fuel pump fuse, otherwise you will not be able to start your car.

In the event that your polo sedan is operated under conditions of increased dusting or you pour not very high-quality gasoline into it, then it is advisable to replace the fuel filter more often than every 30 thousand km of mileage.

Video "Replacing the fuel filter in Volkswagen Polo Sedan"

The video shows how to replace the fuel filter in the car Volkswagen Polo sedan.

If our material helped you or you have something to add, please leave your feedback.

avtozam.com.

Change the fuel filter of the car Volkswagen Polo Sedan

Main page »Maintenance and repair» Engine

Manufacturers from the Volkswagen concern assure that the filter for the car's fuel polo sedan can be reliable to work as much as the car itself. However, its functionality, first of all, depends on the quality of gasoline, as well as the dirt, which, despite the careful operation, still enters the fuel system. As a result, this item has to change.

The filter is recommended after every 20-30 thousand km of mileage. it optimal option. But when the item is very clogged, it can be replaced earlier. And if the engine begins to fond or troce, then, most likely, the problem is precisely in the filter element, the term of which approached the end.

Signs of breakdown

If the fuel filter was clogged in the car, the driver can determine this, taking into account:

uneven operation of the engine;
the drop in the power of the car;
increased fuel consumption compared with the standard for this model;
difficulties when starting the engine.

Filter clogging in the early stages are invisible. However, the experienced driver does not scrub it. He will immediately determine the malfunction and eliminate it.

Replacing the filter element

For replacement, two screwdrivers with flat and cross cutting, rags, as well as a fuel tank, which is in the filter is required. And, of course, a new fuel purifier.

The fuel filtering element in the polo sedan cars is located on the right side of the gasoline tank. The filter is equipped with a regulator of adding fuel, so when buying will have to take into account this component. For the convenience of work, the vehicle is better to drive into a pit or aleacade.

If the car is on the pit, you need to slow down the fuel pressure in the system, disconnect the cover under which the fuse block is placed and disconnect the fuse. There is a block at the wheel in the car's cabin.

The sequence of actions is as follows:

It is worth remembering that after the replacement procedure is completed, you need to install the fuse of the fuel pump. If this is not done, the car will not be able to start.

During manipulations with the fuel system, it is worth remembering about the fire safety technique. If the replacement is carried out in the garage, it is unacceptable to smoke or bring outdoor fire to the vehicle. In addition, it is not recommended to replace the filter in rooms where appliances are installed that operate on natural gas.

If the car has to work in conditions high level Dusting, and low quality gas is poured into the tank, the fuel filter must be changed more often than 30 thousand km of mileage. If this is not done, over time the vehicle will begin to work badly, and then completely refuses to start.

Replacing the fuel filter on the Volkswagen Polo sedan and hatchback do it yourself

High-quality operation of the automotive motor is possible only with effective cleaning of fuel used by contamination. Thanks to the cleaning of the fuel, the operating status of the fuel system is provided. Below, we will tell how to replace the fuel filter on the sedan polo and which cleaner is better to use for shift.

IN vOLKSWAGEN cars Polo Sedan 2011, 2012, 2013 and other releases The manufacturer of machines decided to place a filter under the bottom vehicle, Behind in the area of \u200b\u200bthe fuel tank. You can see the cleaner directly below the right rear wheel.

Fuel Cleaner Mounting

When should I change?

Now consider how many kilometers of the mileage you need to change the cleaning device. According to official technical Regulations In Volkswagen Polo Sedan, the frequency of changing the filter element is performed every 30 thousand km of mileage. This period must be observed provided that you pour a good fuel into the car. When low-quality gasoline is used, the filtering device changes every 20 thousand km. If you have to change TF, you need to think about the choice of another gas station.

According to the service regulations, the fuel filter replacement for the polo sedan is performed with such faults:

the car engine has become "Trojourn", the driver feels vibrations while driving and parking, if the motor machine works at idle;
dropped "thrust" of the power unit, the machine is required more time to accelerate;
there are failures when the driver is pressed by the driver's pedal;
motor machine can arbitrarily stuck;
the engine does not start.

User Andrei Lubosninov removed the video in which showed the procedure self-substitution Filtering device in Volkswagen Polo sedan.

How to replace the fuel filter yourself?

You can remove and change the cleaning device, both with your own hands and with the help of specialists for a hundred. Below we will analyze how to replace the item itself.

Tools and materials

Before you remove and replace the filter, prepare the following:

New TF. To the desired device It could highlightly filter the fuel economker entering the fuel system, it is necessary to give preference to the original details. In Volkswagen Polo Sedan or Hatchback, you can use Mann cleaning devices. Article of the original - WK692. It is important that the filter is equipped with a pressure regulator.
Flat tip screwdriver. It will be necessary to attenuate and remove clamps that fix TF.
Screwdriver with a crusade tip.
Clean rags.
Cropped bottle or other small container. It will be needed to collect residues of fuel from the cleaning device when dismantling.

User Shlepanovan removed a video in which the procedure for replacing the cleaning device in the Volkswagen Polo car is clearly demonstrated.

Stages of replacement

If the repair period approached, use the photo instructions and the description of all the nuances of the fuel filter replacement process.

The procedure for changing the spray cleaner will look like this:

Calculate your car into the garage with a pit or on the overpass.
The replacement procedure should be carried out in the absence of pressure in the fuel ramp. To reduce it, you need to find the fuse block installed in the car's car window under the steering wheel. The engine must be muffled. Open the plastic cover of the fuse block and remove the device that is responsible for the operation of the fuel pump from the landing place. In Volkswagen Polo Cars, this item is marked as BS 32.
Get the car engine. Press the gas pedal is not necessary, turn on the neutral speed. So the motor will work for a while until it stalls.
When the power unit is drunk, turn on the ignition for 5 seconds, not more. During this time, the pressure in the fuel system will decrease.
Take a flat tip screwdriver. Slide under the bottom of your Volkswagen Polo and find the place of installation of the cleaning device. Using a screwdriver, press the fuel plum fastening. Disconnect the highway connected to the filter. Similarly, disconnect two hoses connected to the parts - the supply and discharge highway.
Carefully disconnect the parking brake cable from the retainer.
Using a screwdriver with a crusade, unscrew the fastening tightening and cleaner locks. If the clamps were worn, after installing the new TF, they must be replaced.
Remove the cleaning device from the landing place. When removing, use the rag, since some fuel can get out of the filter. Take a cropped bottle and, substituting it under the cleaner, carefully dismantle it. About one hundred fuel grams will be released from the filter.
Install the new cleaner in the landing place. Fill in it about 50-100 grams of fresh fuel (then that came out of the dismantled filter, it is better not to use). The installation procedure is carried out in reverse sequence. When installing, keep in mind that the arrow located on the body of the cleaner must be directed towards the front of the machine, so the fuel system circulates fuel. Tips of the highways need to be installed on the fittings of the cleaning device until the moment until they snap. At the final stage, insert the safety element in place. Turn the key to the ignition lock and start the engine. At first attempts, he may not start, it is due to the lack of pressure in the ramp. After several attempts by the power unit starts. Make sure that all connections are sealed and there are no leaks.

Remove the fuse block cover and remove the part that answers the pump to loosen the fasteners and disconnect the highway connected to the cleaner device dismantle the filter element and change it, the bay of a bit of fresh fuel inside

Question price

The average cost of the cleaning device for Volkswagen Polo is about 1000 rubles. You can find a cheaper option. The price of analogue analogue is 300-600 rubles, but it all depends on the seller and the store, as well as the quality of the purchased part.

Consequences of untimely replacement

If the filter finally clogged, you will not be able to start the engine of your car.

Others possible consequences undime replacement Fuel filter:

The car owner will face the problem of clogging the power system. Pointy fuel purification will lead to pollution of gasoline injection injectors.
As a result, it will entail the incorrect operation of the power unit and reducing its power. The driver will have to have more gas for gas to accelerate in the usual pace, but it will not work. As a result of clogging power aggregate It will take more time to increase the speed of the machine. What will lead to an increase in fuel consumption. It will not be possible to detect this problem without accurate measurement, since the difference may be insignificant and am 200-300 grams per 100 kilometers of run.

Video "How to change the filter to Volkswagen Polo?"

The user Alexander Maslennikov took off and published a video in which the procedure for changing the cleaning device of fuel indicating all the nuances and features is shown in detail.

Did you have any questions? Experts and readers of the Autodvig website will help you, ask a question to support the project - share a link, thank you! Evaluate the benefit of the article: (1 vote (s), Average: 5.00 out of 5) Loading ...

Similar articles: